Uttar Pradesh State Industrial Development Authority Tender

Supply, fixing and Hoisting of 6.00-7.00 m span Cantilever structure in position with one vertical post of 6.00 m clear height from top of R.C.C. foundation made of 300 mm dia pipe welded with 10 mm thick ms plate stiffner and 2 nos 8 mm thick ms plates at top welded with structure of 40 mm NB pipe comprising of horizontal, vertical and bracing pipe of 32 mm NB as per structural design requirement and approved drawing with vertical and lateral clearance given in clause 802.2 and 802.3 including one coat of primer and two coats of synthetic enamel paint on the whole structure and installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and R.C.C. 1:2:4 with cement, coarse sand and 20 mm approved grit complete for fixing the complete structure in position as per direction of engineer in charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the signage structure inclussive of all taxes royality, vat etc. T & P machine material and labour required for proper completion of the work. ( Note:- The composite warranty jointly signed by original manufacturer and and authourized converter of at least 7 years shall be furnished on non judicial stamp of required denomination for complete structure.

Supply, Fabrication & Erection of Retro Reflective Road Direction Board of size 1.20 M X 0.90 M made of two vertical pipe of 65 mm dia 2 mm wall thickness tubelar stainless steel & frame of board may be of 35 mm dia 1.60 mm wall thickness tubelar stainless steel, ACP sheeting of 4 mm thicness, Retro Reflective, computer cut letter of apprved height & width. The rates includes supply fabrication, supply, transportation and erection of the sign board with all T& P machine material and lbour required for proper completion of the work. All works shall be carried out as per direction of Engineer-In-charge.

Supply, Fabrication & Erection of Retro Reflective Location Board of size 1.50 M X 1.20 M made of two vertical pipe of 65 mm dia 2 mm wall thickness tubelar stainless steel & frame of board may be of 35 mm dia 1.60 mm wall thickness tubelar stainless steel, ACP sheeting of 4 mm thicness, Retro Reflective, computer cut letter of apprved height & width. The rates includes supply fabrication, supply, transportation and erection of the sign board with all T& P machine material and lbour required for proper completion of the work. All works shall be carried out as per direction of Engineer-In-charge.