Uttar Pradesh State Industrial Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh State Industrial Development Authority - UPSIDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date1 May 2025
Closing Date21 May 2025
Tender Amount₹ 2,65,86,518
AI Insights
Technical
Technical
Financial
Class Of Bidder
... View More
A class approved license is required for Electrical works.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed works with government departments or similar entities during the last 7 years for similar nature of works, such as Enterlocking and Building Work. The experience requirements are as follows:
- One work equal to a minimum of 80% of the bid value completed in the last seven years, with a value of at least 25254511.00 INR (80% of 31568139.00 INR).
- Two works equal to a minimum of 60% of the bid value completed in the last seven years, with a value of at least 18940883.00 INR (60% of 31568139.00 INR) for each job.
- Three works equal to a minimum of 40% of the bid value completed in the last seven years, with a value of at least 12627256.00 INR (40% of 31568139.00 INR) for each job. Alternatively, the bidder can have:
- At least 02 (Two) jobs of similar nature, each with a value not less than 60% of the estimated cost of work, completed within the last 07 (Seven) years, with a value of at least 18940883.00 INR (60% of 31568139.00 INR) for each job.
- At least 01 (One) job of similar nature, with a value not less than 80% of the estimated cost of work, completed within the last 07 (Seven) years, with a value of at least 25254511.00 INR (80% of 31568139.00 INR) for the job.
- At least 03 (Three) jobs of similar nature, each with a value not less than 40% of the estimated cost of work, completed within the last 07 (Seven) years, with a value of at least 12627256.00 INR (40% of 31568139.00 INR) for each job. The bidder should have completed at least one of the following:
- Atleast 02 (Two) jobs each of similar nature of value not less than 60% of the estimated cost of work, with a value of at least 18940883.00, completed within the last 07 years.
- Atleast 01 (One) job of similar nature of value not less than 80% of the estimated cost of work, with a value of at least 25254511.00, completed within the last 07 years.
- Experience of having successfully completed works with a value of at least 12627256.00. The average annual financial turnover from the core business of the bidder should be at least 30% of the estimated cost of the tender during the immediate last 03 consecutive financial years, with a minimum average annual turnover required of 2841332.60 (30% of 9470442.00).
Costs
EMD
₹ 6,31,362Document Cost
₹ 6,675Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_SIDC_1035062_1Tender No
CD_II_42_Dt.24042025Tender Authority
Uttar Pradesh State Industrial Development Authority ViewPurchaser Address
-Website
http://http://www.onlineupsidc.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Concrete with 2cm gauge stone ballast, coarse sand & cement in poroportion of 4:2:1 (4 graded stone aggregate: 2 coarse sand: 1 cement:) including supply of all material, labour and T&P etc. required for proper completion of the work as per direction of Engineer-in-Charge.
37.51
7050
264445.5
... More
12 mm thick plaster with cement and coarse sand of 2.20 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper cornpletion of the work.
257.4
200
51480
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould. laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper ernbedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 80mm thick and M-40 grade.
4515
1010
4560827.25
... More
Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant ec. required for proper completion of work (No material shall be issued by deptt.)
71871.07
90
6468396.3
... More
Supply and fixing Galvanized corrugated iron roofing in position including supply of all materials, labour, Tools &plants etc: required for proper completion of the work and including wastage.0.80mm Thick
2805.79
990
2777732.1
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab upto 0.50 Sqm
429.6
4217
1811773.56
... More
Supply and fixing of Kota stone in flooring 25mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 20 mm base coat (bedding) of 1:4 cement & coarse sand morter and polished by hand-or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour Tools & plants etc. required for proper completion of the work.
950.82
1450
1378689
... More
Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings. The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment).
986.4
4851
4785273
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes.110mm Diameter
324
275
89100
... More
Painting roofs or other iron work in large areas with one coat priming and tone coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work Paint to be used should confirm the ISI no. 103-109.For every Coat after the first coat.
3456.24
100
345624
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%