Uttar Pradesh State Industrial Development Authority Tender

Cleaning jungle including rank,vegitation grass,push wood trees and samplings of grith upto 30 cms measured at a height of 1 M.above ground level and removal of rubbish up to a distance of 50 M,out side the periphery of area cleared.. same as aove 259(i) above but grass only

Surface dressing of the ground including removing vegitation and in-equalities not exceeding 15cm deep and disposal of rubbish,lead up to 50m and lift up to 1.5m.All kinds of soil.

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 m in depth and earth work in embankment to be in 20 cm.layers including remming and dressing the surface to required levels and slopes and also including 1.50 M.lift and 30 m lead .The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 m distance as directed by the Engineer incharge.excluding royalty. Wherever applicable for small work or Abadi area.( Where machine can not reach/move)

Cartage of ballast , Kankar, Coal , grit or sand including loading & unloading but excluding stacking on pakka roads : (Cartage for 3km).The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in- 30m.distance as directed by the Engineer incharge excluding Royality .Wherever applicable for small work or Abadi area (Where machine can not reach/move)

Tractor trolley with driver and including pol

Supply of Beldar

Wheeled excavator cum Loader including P.O.L. and driver

Tipper - 10 cum

Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Fine sand : 8 graded stone aggregate 40 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work.In Foundation and floors. Same as above 1:4:8 but in Coarse Sand

Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : (a) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Wages of sweeper

Wages of superwisor / mate

Tracor trolley covered with tripal

J.C.B. Machine with driver including P.O.L.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.

Repair to pot holes and removal of loose material,trimming of sides ,cleaning of surface by providing tack coat @ 0.30 kg per sqm,20 mm thick pre-mix carpet composed of 13.2 mm to 5.6 mm aggreggates and seal coat type B specification , compacted by three wheel 80-100 KN static roller as directed by Engineer-in-charge by using mixoll machine including all T&P and sundries etc.required for proper completion of work but excluding cost of bitumen and grit

Supply of packged bitumin (pack of 156 kg) ( I.A SALEMPUR HATHRAS+I.A TALANAGRI SECTOR-1 & 2 ALIGARH + I.A CDF COMPLEX ALIGARH)

Supply of packged bitumin (pack of 156 kg) ( I.A &IIDC ETAH)

Supply of 13.2 mm to 5.6 mm crushed stone aggregates( I.A SALEMPUR HATHRAS)

Supply of 13.2 mm to 5.6 mm crushed stone aggregates ( I.A &IIDC ETAH)

Supply of 13.2 mm to 5.6 mm crushed stone aggregates ( I.A TALANAGRI SECTOR-1 & 2 ALIGARH) ( I.A CDF COMPLEX ALIGARH)

Laying of I shaped precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50Kg.) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. Including VAT 80 mm (Rubber moulded Gray)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on old work including cost of all material, Labour, T&P etc. complete required for proper completion of the work.

Cast-in-situ Cement Concrete M20 Kerb Providing and laying / construction of cement concrete Kerb with top and bottom width 115 and 165 mm respectively & 250mm high in M 20 grade PCC on M-10 grade foundation CC 150mm thick, foumdation havinf 50mm projection beyond kerb stone, Kerb stone laid with kerb laying machine, foundation concrete laid mannually at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).(SOR Aligarh 2022)