Uttar Pradesh State Industrial Development Authority Tender

Supply Installation Testing & Commissioning of Step Light for highlighting the architectural elements of Temples , Having the Minimum wattage 7W-10W with 120° beam angle with high pressure die cast aluminum housing for efficient thermal management, sturdiness & excellent corrosion resistance ,with IP-66,,High efficiency long life COB LED mounted on MCPCB of fixture. Minimum 180 Lumen output at 3000K CCT,PF-0.95,THD-10,CRI-80, Average Burning Hours Life-50000Hrsat L70B50,Electronic driver, Powered by an Built-In potted, electronic driver (SMPS based constant current supply) with lower THD, Output Open/ Short circuit protection, Surge voltage protection up to 3.5kV & other safety test as per IS:15885 Part 2/Sec 13 Fixture length to be 196 mm +- 1%, width 129 mm +- 1%, height 85mm +- 1%( Warranty 03 years against the manufacturing Defect, Physical Damage and Theft from the Date of Supply & installation through contractor) Make Havells, Bajaj,Phillips,wipro

SITC of exterior rated Architectural LED flood lighting luminaire,CCT should be 2700-3000k, suitable for facade lighting with Pure polyester powder coated die-cast aluminium housing in grey finish with aesthetically designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. M16 gland is used for cable entry. Total System wattage not exceeding 50W-55W with system lumen output should be more than 5400 lm with all LEDs on. PC reflector for maximum light output. PC lens used for symmetric dictribution. Tempered protective toughened glass, thermal shockand impact resistant (IK-07) fixed to the housing with aluminium frame and SS screws (For detailed Photometric data, please refer (LM79 report & IES file). Fixture should have Height 200 mm±1% including surface mount base and widhth 56 mm±1% with constant locking hinges for simple position control from various angles without special tools. Fixture shall be suitable to operate at an ambient temperature range of -10°C to 45°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @50000 burning hours. LED should be of make Nichea, Osram, Cree, Lumiled only. Luminaire shall be complete with integrated BIS IP 66/67 Built-In Potted, isolated electronic LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Over Voltage protection, Surge Voltage Protection upto 6kV (30W)/ 10kV (50W) & other safety test as per IS 15885 Part-2/Sec 13.with power factor 0.95 and THD 10. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to As per IS 16107 Part 2/sec1 and 16103 Part 2, cl no. 7, and clause 8.1 and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. (Warranty 03 years against the manufacturing Defect, Physical Damage and Theft from the Date of Supply & installation through contractor) Make Havells, Bajaj,Phillips,Wipro

SITC of exterior rated Architectural LED Bollard luminaire of 1 metre in height and black color Housing made up of aluminum pipe UV protected Pure polyester powder coated black after phosphochromate treatment It consists of aluminum heat sink for effective thermal management, sturdiness & excellent corrosion resistant. Mounting flange of MS sand casting is used at the bottom.,CCT Should be 2700-3000k suitable for facade lighting with Die-cast aluminum housing, powder-coated finish, Clear toughened glass of 4mm thickness, Total System wattage not exceeding 10W-12W with system lumen output should be more than 720 lm with all LEDs on. Luminaire should be complete with dedicated Lens. LED and PC diffuser in round shape for used for glare free uniform light distribution. Fixture shall be suitable to operate at an ambient temperature range of - 10°C to 45°C and complete luminaire shall be IP65 and IK07 rated. LED Life time shall be at least L70B50 @ 50000 burning hours. LED make of Nichea, Osram, Cree, Lumiled only. Luminaire shall be complete with integrated BIS IP 65 potted driver Powered by built-in, isolated, potted electronic LED driver in ABS housing with APFC (SMPS based constant current supply) with lower THD 20. Output Short / Open Circuit protection, Over Voltage protection, Surge Voltage protection 3.0KV (CM & DM) & other safety test as per IS15885 Part-2/Sec 13.and with power factor 0.95. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. ( Warranty 03 years against the manufacturing Defect, Physical Damage and Theft from the Date of Supply & installation through Make Havells, bajaj,phillips,wipro contractor) Make Havells, Bajaj,Phillips,Wipro