Uttar Pradesh State Industrial Development Authority Tender

Dismentaling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the engineer-in-charge within a distance of 60 meter(200 Feet)

Dismantling of flexible pavment and disposal of dismantle material upto a lead of 100 meters, stacking seviceable and unseviceable materials separately as per technical specification clause 202 Bituminouse Course

First class brick work in 1:6 Cement & Coarse sand 1.25 F.M. Mortar in foundation and plinth including supply of all material labour and T&P etc. required for proper completion of the work.

Providing & Fixing of cement concrete kerb with top and bottom width 115 and 165 mm resepctively, 250 mm high in M-20 Grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone laid with kerb laying machine foundation concrete laid manually, all complete as per clause 408

Fixing and laying at or near ground level factory made old kerb stone in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Labour Rate Only).

Cement Concrete with 4 cm guage approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, labour, tools & Plant etc. required for proper completion of work.

Supply and stacking of 45-90 mm gauage hard stone ballast from approved query for inter coat including royalty, cartage, octroi, sales Tax & all other taxes whatsoever applicable under rules and also including stacking to the required template after screening at road side, including dressing of road patries as required where metal is to stacked as per direction of Engineer incharge.

Consolidation of 45-90 mm guage hard stone ballast for 13cm ( loose) thick by road roller including hire and fuel charges of road roller, excluding cost of stone ballast and blinding materials but including opening out stacks, sorting ballast into different sizes, spreading making medhi to retain water and also including cost of carriage of materials & water and T&P etc. required for the proper completion of the work. Water for consolidation to be arranged by the contractor at his own cost

Construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) coarse and fine aggregates conforming to IS 383 maximun size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side from work (steel channel laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying de bonding strips, primer, sealant, admixtures as approved curing concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (approved Quarri grit)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectrorising glass beeds @ 500gms per sqm. Area, thickness of 5.00 mm is exclusive of surface applied glass beeds as per IRC:35-2015. The finish surface to be level, uniform and free from streaks and holes.

12 mm thick plaster with cement and coarse sand of 2.20 fineness modules in 1:6 over brick work minimum thickness not to be less than 1 cm including supply of all materials, labour, Tools & Plants etc. required for proper completion of the work

Painting or varnishing work in small areas or new wood work with one coat (upto one square meter of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all material, labour, Tools & Plant etc. required for proper completion of the work.

Providing and laying 100 mm thick factory made cement concrete interlocking Paving blocks of M50 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.