Uttar Pradesh State Industrial Development Authority Tender

Providing & fixing in position Guide Map Structures (Size6.100x6.100)m for signage's made out of ISMC 150x75m vertical post i/e sign board frame of MS hollow section 96x48x4mm diagonal Bracing necessary base plate stiffeners 7 gusset plates bends nut bolts as required as per approved drawing the size of raft will be 1200x1200x300mm CC 1:1.5:3 in RCC and column size 900x900x1650mm of RCC 1:1.5:3 in RCC over base concrete of 1:4:8 of 0.10 m thick with all necessary reinforcement the structure shall be vertically hoisted and erected in three level & plumbs with the help of crane all steel work shall be enamel painted including all complete labour overheads T&P required for completion of work.

Providing & fixing of reflective signs with a corrosion resistant 4mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully cored with High Intensity prismatic sheeting type IV as per IRC-67:20:12 retro reflective sheeting with back frame MS angle of 35x35x5 mm Legends, letters, numeral sand borders etc should be as per MORTH specification No-801.3.7. The sheeting shall have a pressure-sensitive adhesive of the aggressive-tack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, day time colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/Institute by the manufacturer of the sheeting and incase the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering the sheeting as per IRC 67 :2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge

Providing and applying 2.5 mm thick road marking strips (retro reflective) of specified shade/ colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.