Uttar Pradesh State Industrial Development Authority Tender

Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and excluding the supply of steel and its wastage Bend, hooks and authorized over lapping shall be measured upto floor to level.

Antitermite treatment of along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos / Lindane E.C. 20% with 1 % concentration

Sand filling in plinth including supply of necessary quantity of local sand from a distance not exceeding 8 Kms from the site of work and including watering dressing etc. required for proper completion of work

2.50 Cm thick D,.P.C with Cement and approved coarse sand 1:2 and including water proofing materials as approved by the Engineer in Charge in the proprortion as specified but the manufacture including supply of all material, labore T&P for proper completion of he work. Including proper curing and shuttering as necessary.

Supply and fixing of 35 MM THICK flush doors, commercial quality conforming of I.S. 2202 part-1 (1983) including ISI marked oxidized iron fitting with screws, Bolt inges,Handles,Siliding bolt, Door Stopper and tower bolt etc.

Providing and fixing glass panes with putty and glazing clips in steel doors, windows,clerestory windows all complete with : 4.0 mm thick panes.

Supply and fixing galvanized mosquitos proof heavy quality iron wire gauge or expended metal heavy quality over windows and including supply of C.P. Teakwood batten 8cmX1cm (3"X3/8")/flat iron 25mmX4mm and including supply of necessary screws all materials, labour, T&P etc. required for proper completion of work.

Sal Wood wrought framed and fixed including simple mouldings,straight works, as in chaukhats including supply of all material, labour and T&P etc. required for proper completion of the work and as directed by the Engineer In charge.

Providingandlaying"brickcoba"12mmthicklaidwithM-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreding cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cmX30cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including supply of all material, labour, T&P etc complete for proper completion of work.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick

Finishing walls with water proofing cement paint of approved make such as Super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on under coated wall surface (One coat) over and including one coat white cement primer to give and even shade after thoroughly after brushing the surface

Destempering with Oil Bound Distemper on undercoated wall surfaces (Two coat) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drop and loose scales of lime wash and other foreign matter.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S.sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lipsof 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of theEngineer in Charge but excluding the cost of painting with :12.5 mmthick tapered edge gypsum plain board conforming to IS: 2095- (Part I) 12.45.1: 2011 (Board with BIS Certification marks)

Providing and fixing 18 mm thick Granite (gang saw cut) mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Slab area above 0.50 Sq.M.)

Rubber Moulded Cement concrete Kerb stone M-20 (Size 12"×12" ×6")

Supply of 80mm thick shaped Mechanically compresssed inter locking cement concrete pavers block manufactured by high pressure & controlled vibration machine having plan dimension 200x(160+120mm) with minimum 5mm thick topping of D.P. cement mixed with 25% marble powder. The compressive stength of concrete paver blocks shall not be less than 30MPa by weight 2.80 kg/no. including cost of all material, labour T&P etc. required for proper completion of work as directed by Engineer-in-charge. Laying of interlocking tiles of thickness 60 to 80 mm including leveling and dressing of surface to required level and slope, filling joints with local sand including the cost of all labour T&P etc. complete including 15 cm thick GSB and excavation etc complete job..

GRASS

Fast Growth Summer Glow Plant, For Garden

Jasmine plants

Plumeria Plant (Champa)

Fragrant Rosy Gardenia

Gulmohar – Delonix Regia

SS GRILL

CP PLUS CCTV CAMERA (Camera Range: 10 to 20 m) (Incl fitting)

Three Seater Visitor Chair, JHE-WC094 (STEEL)

AC/COOLER

TV SCREEN & SERVER (STORAGE)

Automatic Boom Barriers (Boom length upto 5 mtr)

Electrical Fixture (Tube lights, Fans, Fancy lights) as per type design

PLUMBING, RAIN WATER DROP PIPE ETC as per type design