Uttar Pradesh State Industrial Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh State Industrial Development Authority - UPSIDA Tender
Civil And Construction
Road Construction
Eprocure
Opening Date2 Apr 2025
Closing Date23 Apr 2025
Tender Amount₹ 6,69,91,113
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is Class A.
Technical Capacity
... View More
The required prior work experience for the bidder is as follows: * The bidder should have completed at least 3 jobs of similar nature, each with a value not less than 40% of the estimated cost of work, which is 31619805.00.
* Alternatively, the bidder can also have completed at least 2 jobs of similar nature, each with a value not less than 60% of the estimated cost of work, which is 47429708.00.
* Or, the bidder can have completed at least 1 job of similar nature with a value not less than 80% of the estimated cost of work, which is 63239611.00. These similar works should have been completed within the last 7 years, and the bidder must submit completion certificates issued by the client.
Costs
EMD
₹ 15,80,990Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_SIDC_1024336_1Tender No
CD_IX_319_Dt_26032025Tender Authority
Uttar Pradesh State Industrial Development Authority ViewPurchaser Address
-Website
http://http://www.onlineupsidc.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavation for roadworks in soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopes, in according with requirments of lines, grades and cross sections, and transporting to site, spreading,grading to required slope and compacted to meet requirment of table No. 300-2 DSR 253/4
458
150
68700
... More
Providing and Laying cement concrete in 1:4:8 (1 cement :4 fine sand :8 graded stone aggregate 40mm nominal size ) including supply of all material, labour and T&P etc. Required for proper completion of the work. DSR 281/5
153
6720
1028160
... More
First class B/w in 1:4 cement sand mortar in F/P including supply of all material labour T&P etc required for proper completion of work SI No. 305 DSR 360/6
527
5260
2772020
... More
12mm thick plaster in 1:5 cement & sand mortar over brick work minimume thickness not less then 10mm including all supply of material, labour T&P etc S.I.No. 305
1909
204
389436
... More
12mm thick plaster in 1:5 cement & sand mortar over brick work minimume thickness not less then 10mm including all supply of material, labour T&P etc S.I.No. 305
18835
8
150680
... More
Providing, laying, spreading and compacting graded stone aggregate (Table 400-13) to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub- base /base course on well prepared surface and compacting with vibratory roller of minimum static weight of 80 to 100kn to achieve the desired density complete as per clause 406
2825
5832
16476247.5
... More
Providing and applying primer coat with bitumen emulsion VG-10 on prepared surface of wet mix macadam base including cleaing of road surface and spraying primer at the rate of 0.70 kg/sqm (Table 500-3) using mechanical means complete as per clause 502
18835
49
938548.05
... More
Brick on edge pavement onn patries with brick laid dry joints filled with local sand including prepartion of base to proper slope and its ramming spreading a layer of 1cm 3/8' depth of local sand over the subgrade & including supply of all material
1527
515
786405
... More
Providing and laying 50mm thick bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of grading 2 (19 mm, Table 500-7 ) premixed with bituminous binder (VG-30) @3.40 percent by weight of total mix and filler transporting the hot mix to work site laying with a paver finisher with sensor control to the required grade level and alignment rolling smooth wheeled vibratiory and tandem to achieve the desired compaction as per specification clause no. 504
942
11009
10371354.06
... More
Providing and applying tack coat with bitumen emulsion (VG-10) using emulsion pressure distributor t the rate of 0.20 kg/sqm on the prepared bituminious surface cleaned with mechanical broom (As per Clause 503)
18835
10
201534.5
... More
Providing and laying 25mm thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of grading -2 (VG-30) @ 5.4% of mix and filler transporting the hot mix to work site laying with a paver finisher with sensor with sensor control to the required grade level and alignment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per clause no. 507
18835
359
6775514.55
... More
Providing and laying of hot applied thermoplastic compound 2.5mm thick as per approved colour layout and design including reflectorising glass beads @250gms per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per MORT & H specification NO. 803 level uniform free from streaks and holes rates to be inclusive of all taxes royalty VAT etc all T&P machine and labour required for proper completion of work rate as per SOR Chapter No. 26 /MORTH-803(8.13)/ Bareilly /2022
636
618
393048
... More
Mild steel or iron in plan work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level item no. 10/504
9.4
8870
83378
... More
R.C.C. work with cement approved coarse sand and 2cm (3/4'') gauge approved stone grit in the proportion 1:1.5:3 (1 cement : 1.5 sand coarse :3 stone grit 20mm aggregate ) slabs of doors and windows excluding its fixing and binding the same necessary with 24 BWG binding wire and including necessary centering and shuttering etc and also including supplyof materials sabour and tools and plants etc required for proper completion of the work strength of the work strength of the concrete shall not be less than M-200 item no. 5/283A
6
8425
50550
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%