Uttar Pradesh State Bridge Corporation Limited Tender

Plain/Reinforced Cement Concrete M15 in Open Foundation complete as per Drawing and Technical Specifications.:- Concrete in Foundation (R.E.WALL)

Plain/Reinforced Cement Concrete M15 in Open Foundation complete as per Drawing and Technical Specifications.:- Lean Concrete in friction slab / Approach slab

Safety Kerb in RE Wall P.C.C.M-30 Grade

Plain/Reinforced Cement Concrete in Sub Structure complete as per drawing and technical specificaiton :- R.C.C. M35 In friction slab

Plain/Reinforced Cement Concrete in Sub Structure complete as per drawing and technical specificaiton :- R.C.C. M40 In Crash Barreir

Plain/Reinforced Cement Concrete in Sub Structure complete as per drawing and technical specificaiton :- R.C.C. Coping beam M35 In Top R. E. Wall

Supplying, fitting and placing HYSD bar reinforcement in Sub Structure complete as per drawing and technical specification

Narrow Filter Sub Surface Drain

Reinforced Earth Structures With reinforcing elements of synthetic geogrids

Reinforced Earth Structures Facing elements of RCC M35

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification

Supplying & laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. having thermobonding a draining core - HDPE geonet comprises of two sets of parallel overlayed ribs integrally connected to have a rhomboidal shape with a polyethylene film and a nonwoven geotextile having mass per unit area 130 g/m2 and tensile strength of 8.0 kN/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 0.7 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 13.5 kN/ m , with mass per unit area of 830 gsm, at easily accessible location including top and bottom, with all leads and lifts, manpower and machinery, materials, labour etc. complete as per MORT&H Specification 704 and as directed by Engineer - In - Charge.

Providing, laying and spreading GSB Material on a prepared sub grade, adding the designed quantity of cement to the spread Material, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base/base.

Providing, laying and spreading WMM G-1 Material on a prepared sub grade, adding the designed quantity of cement to the spread Material, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base/base.

WMM Stablized /ETA(1%cement,3.5%bituminius)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing, laying, DBM with higher capacity batch type HMP using crushed aggregates of specified grading premixed with bituminous binder @ 4% by total weight of mix and filler, transporting the hot mix to the work site , laying with hydrostatic paver finisher with sensor control to required grade, level & alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ 1 litre for 2 sqm.

Providing and laying of hot applied thermoplastic copound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from streaks and holes.

Reflective Raised Pavement Marker (RRPM/Cat's I) - Supply & fixing of raised pavement marker (cat eye) of approved quality of spring poly strength with curve corner technology made of USA prismatic lens fix with bituminous adhesive as per MORT&H specification