Uttar Pradesh State Agro Industrial Corporation Limited Tender

Urine Toilet Double Door with Overhead water tank with/without powder coating.

(A) Toilet size length 1448mm, width 762 mm, height 2134 mm, 35mmx35mmx5mm sq. angle for top & bottom frame or 13 mm x 13mm x 1 mm square pipe, 22 guage GI/FRP sheet, 25mmx25mmx1mm pipe frame in the door. Water tank cap 200 ltrs. With tap fitting at the top, plateform base with chequred plate of 5 mm, powder coating on complete toilet with colour, with coating thickness 60 mircon. Overall dimensional tolerance is ±25mm. Accessories:- for both cabin Basin set 2 Nos. exhaust fan 2 nos, CFL 4 nos operated with solar system, urinals (Ceramic) 2 nos.

Painting primer two coat and synthetic enamel paint two coat. With/without pavers 914mmx914mm, all sides. Overall dimensional tolerance is ±25mm. supply at sight and installedif require

Febrication of Shamshan (Mukti Dham) Shade ( Size-20’x15’) Providing and fixing of pre fabricated steel structure for shav Dah Shala Shade size 20ftx15ft, size., A:-Colomn shall be IS 150x75 mm (1 Section) I Section footing:-Base plate having thickness 10mm width 10 inchx8inch shall be placed in the concrete duly fix in concrete by means of foundation bolts and foundation bolt are merged in concrete, bolt thickness at least 14 mm. B:- Truse shall be made of IS 40x40x5mm with 35x35x5mm support as per duly welded to gather. Purling shall be made of IS 35x35x5 mm or 1.5 mm C.R sheet purlins. C:- 5 mm corrugated galvanized sheet shall be provided either TATA or NATIONAL brand over truss and purlins with the help of J Bolt or popup rivets. D:-Two Display Board of 80 sq feet. E:- Each colomn shall be fitted with base plate with the trusses and each purlin shall be fitted with trusses by clits. G:- Properly ridging shall be provided on the G.I. corrugated sheet to avoided leakage. Each J hook or Pop up Rivets shall be fixed with bitumen and steel washer to avoided leakage± 5% tolerance is provided for overall dimensions and measurements.

Civil work for shamshan ( Mukti Dham) Shade ( Size 4.60mtsx6.10mts) Proper Dressing & Compaction of the floor (4.00mtsx6.10mts), BaseMaking (M-10) Grade C.C (1:3:6) 4.60x6.10 mt x 0.15mt=4.20 Cu.mts. C.C. M.20 grade (1:11/2:3) 4.60 x 6.10 mts x 0.30cm =8.41 Cum OrFire resistant brick best quality class-1 (1.4 Ratio) with half ½” grou in Brick work (4.60mts x 6.10 mts x 0.30mts= 8.41 cum)

Shamshan Funeral Stand Made by I-Beam 150x75 cms, Horizontal Pole 3 no (150x75cmsx 2 ½ Unit ) 1-Beam, Vertical Pole 6 No (150x75mmx3) I Beam H, Stand:-Should by grouting put properly upto in floor, Over all size of stand=6.5” x2.5”x3’

Manual Three wheeler Rickshaw (Close) with/Without Powder Coating) Close Box:-Length 1219mm, width 813mm, depth 555,mm 22 guage CR sheet, 25 mmx25mm angle frame, powder coating on box with coating thickness 60 microne. OR Painting: Primer 2 coat & synthetic enamel paint, Overall dimensional tolerance ± 25 mm

Advertisement panel cum dustbin (movable ) C.R Sheet.

40mmx40mmx1.5mm square pipe is used for column, Height of column is 2134 mm, Top board size is 6.10mm x 457mm, 25 mm x 25mm x 1 mm aquare. S.S. pipe is used for bottom support., Dustbin box size is 457 mm x 457 mm x 610 mm, 22 guage CR sheet is used for dustbin box., Radium strip at powder coated pipe., powder coating on complete dusbin with coating thick 60 Mircon

Painting:-Primer two coat and synthetic enamel paint two coat. Overall dimensional tolerance is ± 25 mm.

Pre Febticated Bus Shelter- A side frame:-Side frame shall be made of 50x50 mm aquare hollow section and 20 Swg. G.I sheet fixed by welding or riveting on the both side of the frame as per standard practice size. B- Floor:- Floor of the shelter shall be made of 10 inches brick lining masonry filled with lean base of concrete followed by concrete powers of concrete base as per consignee instruction. C-Roof Frame:-Roof frame shall be made of 50 x 50 mm square MS Section followed by 5 mm thick G.I sheet is fitted for roof. D-Back frame:- Back frame shall be made of I.S. 25 x 25 x 3 mm over it 20 swg, G.I. sheet if fitted and fastened with back frame pipe made of 50 x 50 mm hollow square M.S. pipe. E- Cahir:- Chair 2/3. No. as per requirement is fixed in concrete base shall be made of 30 mm round M.S. pipe of standard practice with G.I sheet fixed over it like banch. F-Railling:-2 No of railing shall be made of 40 mm diameter S.S/G.I. pipe as shown in drawing attasched. G- Front Sing Board:-Front sign board shall be made of frame I.S.A 25x 25x 3 mm and 20 swg. Sheet fitted over it, this board is placed over the top of the shade. H.Foundation:- Foundation of the whole shade rest on the column footing/foundation bolt as per standard practice. I- Solar Light:- This arrangement is optional as per demand of consignee 20 watt L.E.D solar streer light 8 hours backup with auto on off arrangement with battery with warrantee of 1 year. Civil:- 8’ C.C. base in angle & 80 Gauge Sheet qty frame, Chair S.S (3x2) Seater.

Trailer Mounted Mobile Bio-Toilet

6 Seter-Trailer mounted mobile Bio-Toilet should become complete with the perfect combination of body-shell with bio-digester tank, sturdy trailer with path-ways on both side. Squatting pans on 6 No cabins (3 cabins for Ladies & 3 cabines for Gents) fresh water tank, hand wash facility, solar light facility, towing facility, stairs with side railing etc.. Facilities for the effective use. Length (1) 3.5 to 3.6m width (w) =3m, ( with both side pathways), Height from ground level (h) = 3.15m to 3.5m. Chassis-the chassis made from M.S 125mmx65mm ISMC with necessary cross members. Cabin Structure:-cabin structure should be fabricated by using-M.S.- angle 40mmx40mmx4 or 5 mm, Cabin Panels:-cabin panels should be made of PC sheet. Door:-door size should be approx 6’x22”. Door should be equipped with tower bolts, hinges, S.S handle gripe & proper locking arrangement on both side Roof Structure:-roof structure should be of Hut shape. It is made of PC sheet. Path-way:-Path-way (for both sides) should be fabricated by using M.S Angle 40mmx 40 mm x 6mm/40mm x 40mmx5mm and M.S. flate 25mmx 5 mm & should be approx 600mm wide & should be folding type. The path-ways flooring should be equipped with aluminium chequer plate. Side railings should be provided by using M.S square pipe or rectangular pipe size 2”x 3” Stairs:- Proper stairs (2Nos stairs assy:- 1for each side, detachable type) arrangement with side railing should be provided on both sides (Stairs should be manufactured in such a way that two persons should be able to walk freely at same time (should be one foot wide) Railings should be manufactured by using rectangular pipe size 2”x 1”. Flooring:-floor panel should be integrated with squatting pan (there should be no joints) foot were and skiting should be FRP moulded. The squatting pan should be provided in such a wav that it could be cleaned quickly. The squatting pans connected with tank with the help of pipe, the connection pipe should be in sloppy form, one end of the pipe should be connected with the squatting pan outlet & 2nd side of the pipe should be dipped inside the tank maximum 4th below the bacterial level. Washbasin:-Two S.S/FRP material washbasins of better quality (separate for Ladies & Gents) should be provided on the rear side. Washbasins should be provided with 2 Nos push cock type water taps with suitable pipe line arrangement, 2 Nos towel hangers & 2 Nos soap dispensers etc.Mirrors:-Two mirrors should be provided with washbasins. Bio-Digester Tank:-Tank of suitable capacity is provided, made from FRP/M.S (FRP tank sheet thickness should be (min.)=5 mm, M.S tank sheet thickness should be (min.) =3mm & should be treated with anticorrosive treatment) Partitions should be provided inside the tank & each partition should be equipped with bacterial trap mat. Tank should be connected with gas discharge PV ISI marked pipe & one 3” pipe should be provided for treated waste (which is a clear odorless liquid) discharge from tank. For cleaning or empting purpose one 80mm gate valve with nipple & suitable dia. Synthetic rubber hose pipe of length 5 meteras should be provided. Clean Water Tank:-Water tank with minium capacity of 500 ltrs, should be suitable pipe line connections to each cabin (connections to push cock type taps) washbasins etc. Tank should be provided at front of trailer. Electric Point:- Electric points with light arrangement should be provided in all toilets & tube light arrangement should also be there and junction box fitted on outside of toilet for input cable and control. Solar Light:-Solar panel integrated lighting system should be provided in the cabins, 06 Nos separate 3W solar panels, 2W LED with solar panel chargeable batteries should be provided in the cabins. Towing Arrangement:- Should be fabricated with using M.S channel, Thrust bearing holder and towing hook with spring etc. Suspension:-Should be consisting with 2 Nos, M.S square axles with taper roller bearing hub, road spring leaf spring arrangement, 4Nos tyre & tube with size 7.50x16ply etc.Tool Box:-One tool box cabin with locking arrangement should be provided. Cabins:-One cloth hanging hook should be provided in any one wall panel on each cabin, PUSH Cock type-water taps should be provided in all cabins & at washbasins also. Toilet paper mounting should be provided in all cabins. Steel mug ties (cap-approx. I liter) with chain should be provided on each cabin. Side rail for standing purpose should be provided in all cabin, At cabins centre patination well there should be no gap between ladies & gents cabins. 2 Nos. exhaust fans should be provided, one at ladies cabins and second at the gent’s cabins. Paint:- all parts of Trailer Mounted Mobile Bio-Toilet should be painted appropriately.

Trailer Mounted Nobile Bio-Toilet ( 8 Seater) Trailer mounted mobile Boi-Toilet should become complete with the perfect combination of body-shell with boi-digester tank, sturdy trailer with path-ways on both side. Squatting pans on 8 No cabins (4 cabins for Ladies & 4 cabines for Gents) fresh eater tank, hand wash facility, solar light facility, towing facility, stairs with side railing etc.. Facilities for the effective use. Length (1) 4.5 to 4.7m width (w) =3m, (with both side pathways), Height from ground level (h) = 3.15m to 3.5m. Chassis:-The chassis made from M.S.125 mm x 65mm 15MC with necessary cross members. Cabin Structure:-Cabin structure should be fabricated by using:- (i) M.S angle 40mmx 40 mm x 4 or 5 mm, Cabin Panels:-cabin panels should be made of PC sheet. Door:-Door size should be approx 6x22”. Doors should be equipped with tower bolts, hinges SS handle grips & proper locking arrangement on both sides. Roof Structure:-Roof structure should be of Hut share. It is made PC Sheet.Path Way:-Path-way (for both sides) should be fabricated by using M.S angle 40mmx40mmx6mm/40mmx40mm5mm and M.S flat 25mmx5m &should be appro 600 mm wide & should be folding type. The path way flooring should be equipped with aluminium chequer plate. Side railing should be provided by using M.S square pipe or rectangular pipe size 2”x2”. Stairs:-Proper stairs (2Nos stairs assy-1for each side, detachable type) arrangement with side railing should be provided on both sides (Stairs should be manufactured in such a way that two persons should be able to walk freely at same time, step height should not be more 6” & should be one foot wide) railing should be manufacture by using rectangular pipe size 2”x1”. Flooring:-Floor panel should be integrated with squatting pan (there should be no joints) footrest and skirting should be FRP moulded. The squatting pan should be provided in such a way that it could be cleaned quickly. Washbasin:- Two S.S/FRP material washbasin of better quality (separate for Ladies & Gents) should be provided on the rear side. Washbasin should be provided with 2 nos. push cock type water taps with suitable pipe line arrangement, 2nos towel hangers & 2Nos soap dispensers etc. Mirrors:- Two mirrors should be provided with washbasins. Bio-Digester Tank:- Thistank should have capacity (Min.) 2080 lets & made from FRP/tank sheet thickness should be (min.) = 5 mm, M.S. Sheet thickness should be (min.) 3 mm & should be treated with anticorrosive treatment) Partitions should be provided inside the tank & each partition should be equipped with bacterial trap mat. Tank should be connected with gass discharge PVC ISI marked pipe & one 3” pipe should be provided for treated waste (which is a clear odorise liquid) discharge from tank. For cleaning or wiping purpose one 110mm gate calve with nipple is 100mm diameter synthetic rubber hose pipe of length smelters should be provided. Clean water Tank:- water tank should have minimum capacity of 1000 lets, should have suitable pipe line connections to each cabin (connections to push cock type taps), washbasins etc. Tank should be provided at front of trailer. Electric point:- Electric points with light arrangement should be provided in all toilets & tube light arrangement should also be there and junction box fitted on outside of toilet for imput cable and control. Solar Light:- Solar panel integrated lighting system should be provided in the cabins. 05 nos separate 3w solar panels. 2w LED with solar panel chargeable batteries should be provided in the cabins. Towing Arrangement:- Should be fabricated with using M.S. Chanel,. Thrust bearing, bearing holder and towing hock with spring etc. Suspension:- should be consisting with 2Nos. M.S square axles with taper roller bearing hub, eoad spring leaf spring arrangement 4Nos type & tubes with size 7.50x36 ply etc. Tool Box:- One tool box cabin with locking arrangement should be provided. Cabins:- One cloth haqnging hook should be provided in any one wall panel each cabin, Push cock type water taps should be provided in all cabins & at washbasins also, steel mug ties with chain should be provided on each cabin. Paint:- All parts of Trailer Mounted Mobile Bio-Toiler should be painted appropriately.

Trailer Mounted Nobile Bio-Toilet ( 10 Seater)- Trailer mounted mobile Boi-Toilet should become complete with the perfect combination of body-shell with boi-digester tank, sturdy trailer with path-ways on both side. Squatting pans on 10 No cabins (5 cabins for Ladies & 5 cabins for Gents) fresh eater tank, hand wash facility, solar light facility, towing facility, stairs with side railing etc.. Facilities for the effective use. Length (1) 5.4 to 5.7m width (w) =3m, (with both side pathways), Height from ground level (h) = 3.15m to 3.5m Chassis:-The chassis made from M.S.125 mm x 65mm 1SMC with necessary cross members. Cabin Panel:- Cabin panels should be made of PC Sheet. Door size should be approx 6’x22” Door should be equipped with tower bolts. Hinges. S.S handles grip & proper locking arrangement on both sides. Roof Structure:- Roof structure should be of HUT Shape. It Mde of PC sheet. Path-Way:- Paith-Way (for both sides) should be febricated by using M.S Angle 40mmx40mmx6mm/40mmx5mm and M.S flat 25mmx5mmx& should be approx. 600 mm vide & should be floding type. The path-way flororing should be equipped with aluminium, chequer plate. Side railings should be provided by using .S square pipe or rectangulat pipe size2”x1”. Stairs:- Proper staies (2Nos. staies assy:- 1 for each side, detachable type) arrangement with side railing should be provided on booth sides 9stairs should be manufactured in such a way that two persons should be able to walk freely at same time. Step height should not be more than6” & should be one foot wode) Railing should be manufactured by using rectangular pipe size 2”x1”. Flooring:- Flooring panel should be integrated with squatting pan there should be no joints) foot were and skirting should be FRP moulded. The squatting pan should be provided in such a way that it could be cleaned quickly. The squatting pans connected with tank the help of pipe, the connection pipe should be in sloppy from, one end of the pipe should be connected with the squatting pan outlet & 2nd side ofd the pipe should be dipped inside mazimum 4” below the backfill level. Washing:- Two S.S/FRP material washbasin of better quality (Separate for Ladies & Gents) should be provided on the rear side. Washbasin should be provided with 2 NOsw. Push cock type water taps water taps with suitable pipe line arrangement. 2 Nos towel hangers & 2Nos soap dispensers tec. Mirrors%& Two mirror should be provided with sash basins. Bio-Digester Tank:-Bio-Digester Tank:- This tank should have capacity (Min.) 2500 ltrs & made from FRP/tank sheet thickness should be (min.) = 5 mm, M.S. Sheet thickness should be (min.) 3 mm & should be treated with anticorrosive treatment) Partitions should be provided inside the tank & each partition should be equipped with bacterial trap mat. Tank should be connected with gass discharge PVC ISI marked pipe & one 3” pipe should be provided for treated waste (which is a clear odorise liquid) discharge from tank. For cleaning or wiping purpose one 80mm gate valve with nipple & suitable dia. synthetic rubber hose pipe of length smeters should be provided. Clean Water Tank:- water tank should have minimum capacity of 1000 lets, should have suitable pipe line connections to each cabin (connections to push cock type taps), washbasins etc. Tank should be provided at front of trailer. Electric point:- Electric points with light arrangement should be provided in all toilets & tube light arrangement should also be there and junction box fitted on outside of toilet for imput cable and control. Solar Light:- Solar panel integrated lighting system should be provided in the cabins. 05 nos swparate 3w solar panels. 2w LED with solar panel chargeable batteries should be provided in the cabins. Towing Arrangement:- Should be fabricated with using M.S. Chanel,. Thrust bearing, bearing holder and towing hock with spring etc. Suspension:- should be consisting with 2Nos. M.S square axles with taper roller bearing hub, read spring leaf spring arrangement 4Nos type & tubes with size 7.50x16 ply etc.Tool box:-One tool box cabin with locking arrangement should be provided. Cabins:- One cloth haqnging hook should be provided in any one wall panel each cabin, Push lock type water taps should be provided in all cabins & at washbasins also, toilet paper mounting should be provided in all cabins. Steel mug ties (cap approx. Liter) with chain should be provided on each cabin. Side rail for standing purpose should be provided in all cabion. At cabins centre patination wall there should be no gap between ladies & gents cabins. 2 Nos exhaust fans should be provided, one at ladies cabins and second at the gents cabins. Paint:-All parts of Trailer Mounted Mobile Bio- Toilet should be painted appropriately.

iksVsZcy ysfMt psfUtax :e Qkj 10&esEecj¼10&psEcj½ LDok;j ikbZi 1˟1bap fFkdusl 1 ,e-,e- ijQqjsVM 'khV 0-30,e-,e-fFkdusl] vksoj vky lkbZt 8fQV˟20fQV] ÅpkbZ 6fQV 6bap] ikÅMj dksfVax ikbZi lhV

iksVsZcy ysfMt psfUtax :e Qkj 4&esEecj¼4&psEcj½ LDok;j ikbZi 1˟1bap fFkdusl 1 ,e-,e- ijQqjsVM 'khV 0-30,e-,e-fFkdusl] vksoj vky lkbZt 8fQV˟8fQV] ÅpkbZ 6fQV 6bap] ikÅMj dksfVax ikbZi lhV