Uttar Pradesh Small Industries Corporation Limited Tender

Construction of R.C.C. foundation size 1.80x1.80mtr. And 1.80 mtr deep for builtup overhead structure including earth work in execavation 150mm thick lean concrete in 1:4:8 cement and coarce sand and 40mm gauge stone ballast R.C.C. with 1:1.5:3 cement ,coarse sand and 20mm stone grite including supply and groutingnof 25mm dia foundation bolt(600mm longas per provision of structure including cost of reinforcement and shuttering including all material ,labour T&P etc. required for proper completion of work including cartage up to site and all taxes labour cess etc. all complete work as per direction of E/I earth work in execavation in foundation by mech. Means DSR Code No 2.6.1

Sand filling in foundation DSR Code No 2.27

Lean concrete in 1:4:8 infoundation DSR Code No 4.1.8

R.C.C. 1:1.5:3 in foundation up to ground level DSR Code No 5.1.2 A

Reinforcement 2% of R.C.C. DSR Code No 5.22A.1

Trasportation .Labour charges, T&P such as Hydra and other tools etc.

Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 04 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC 67 2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm. Legends, letters, numerals and borders etc should be as per MORTH specification No-801.37 The sheeting shall have a pressure sensitive adhesive of the aggressive-tack type requiring no heat solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting (Confirming to ASTM D4956- 09 shall be Pressure fixed The Retro reflective sheeting (shall be tested for a certificate or having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility liner removal, adhesion, impact resistance, specular gloss and fungus resistance meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67-2012 & Proof of the same Report shall be uploaded which quoting (tende: The rate shall include all materials labour T&P transportation, installatic and incidentals all complete as per direction of the Engineer-in-charge MORTH 801 S.I. No 11 Lucknow SOR