Uttar Pradesh Small Industries Corporation Limited Tender

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceed 8 Km from the site of work and including watering, dressing etc. Rate to including cost of sant labour and T&P etc. required for for proper completion of work.(S.I. No. 12 & S.I. No. 255)

P/laying in Cement Concrete in 1:4:8 with Cement,C/Sand & 40mm gauge stone Ballast.s.i no 281

P/ laying in 40m dry Brick Ballast. including supply of all material, Labour chargres T&P etc required for propar completion of work.

40mm thick Cement Concrete flooring 1:2:4 (1:Cement, 2:C/Sand & 4:graded stone of size 20mm nominal) s.i no 665

M-150 Brick Work in 1:6 with Cement & C/Sand Mortar.S.I.No.6.1.2

M-150 Brick Work in 1:4 with Cement & C/Sand mortar.S.I.No.6.1.1

12mm thick Cement plaster in 1:4 with Cement & C/Sand mortar.S.I.No.13.4.1

15mm thick Cement plaster in 1:4 with Cement & C/Sand mortar.S.I.No.13.5.1

R.C.C. in 1:1.5:3 with Cement,C/Sand & 20mm gauge stone grite.S.I.No.5.1.2

M.S. Iron in reinforcement in R.C.C. work .S.I.No.504(2)

M.S. Iron in ISMB125 @ 14.25Kg/M for Roof Work.

Red Sand Stone for Roof Work

Providing and laying Vitrified tiles in floor with lean concrete of 600x 600mm sizes (thickness 10mm), with a water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. including 75mm thick base with concrete 1:4:8 complete as per E/I S.I.No.14.1.2

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65mm (22.7)

Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work.

Distempering (Tow Coat) with oil bound distemper of approved brand and manufacture and of required shade on undercoted wall surface to give an even shade S.I.No. 649

S/F of gate ( complete at site)

S/F of Window ( complete at site)

Electrification

S/Fixing of Sign. Board