Uttar Pradesh Small Industries Corporation Limited Tender

Earth filling in plinth including supplly of necessary quantity of each. Including watering, ramming and dressing etc. rate to including cost of earth (from a distane of 5 Km) labour and T&P etc.required for proper completion of work (as per analysis)(S.I. No. 231A)

Cement concrete 1:5:10 with 4 cm gauge stone blast fine sand of 1.25 mm & cement mortar in foundation under floors including supply of all materials labour and T&P etc required for proper completion of work.

M 150 Brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials labour T & P etc. required for proper completion of the work. but in super structure above plinth level up to floor five level (up to Five Stories) including necessary cutting and moulding of brick work as required and also including huney combed brick work in thickness of wall more than 12 cm add to above items 1 to 3

Screping old White or Colour wash including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 meters. (200ft). S.No. 708.

12 mm thick cement plaster on fair side of wall in single coat in 1:4 cement and coase sand including supply of all materials labour and T&P etc. required for proper completion of work.

Cement Concrete in 1:2:4 with Cement, C/Sand & 20mm gauge stone grite.

Supply of M.S. or iron work in angle Iron window and ventilatar frame including cutting welding & wastage including Supply of all materials labour T&P etc. required for proper completion of the work

Suppy and Fixing M.S. Garder 160x82x5.60mm

Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65mm

Providing & applying white cement based putty of average 1 mm thick with Birla Or JK White Cement Putty.

Wall Painting with acrylic emulsion paint og approved brand and manufacture ,T&P Required for proper completion of work

P/L of 10 mm thick vertified tiles size 600x600 in flooring with white cement slury joint filling inc. all comlete at site.

P/F 110 mm dia P.V.C. pipes ISI mark (Use as down & ventilation pipe)

P/F of Window complete at site (1.20X1.50)

P/F of Doors complete at site (1.05X2.10)

Branding

Electrification

Supply and Fixing of Nut & Bolt

S/Fixing of M.S. Gate

Supply and Fixing of Elbow

Supply and Fixing of Sign. Board