Uttar Pradesh Small Industries Corporation Limited Tender

Brick masonry work in 1:4 cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203. (As per Integrated SOR)

Construction of granular sub base by providing well graded material] spreading in uniform layers with mortar grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller ti achieve the diserd density] complete as per technical specification clause 401.(AR)

Providing and laying of expansion joint filler at joint M.R.

Construction of un-reinforced, plain cement concrete pavement, thickness as per desingn over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse Aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, near approaches to bridge/ culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using cruing compound (where specified) and water finishing to lines and grade as per drawing and technical Specification clause 1501

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204.(As per Integrated SOR)

Providing Cement concrete 1:2:4 nominal mix M-20 grade for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

RCC work grade M-25 i/c all material, labour T&P etc. req. for proper completion of the work.(As per Integrated SOR)

steel reinforcement for rcc work including straighting cutting bending etc 5.22.6

S/F Sign board etc all complete.