Uttar Pradesh Small Industries Corporation Limited Tender

1:4:8(1 cement : 4 coarse sand (Zone III ) derived from natural sources : 8 graded Stone aggregate 40mm noinal size derived from natural sources etc. as per D.S.R.NO. 4.1.8

Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in foundation and plinth in 1:4 (1cement :4 coarse sand )as per D.S.R.NO. 6.1.1

12mm Thick cement Plasterof mix 1:4 (1 cement :4 coarse sand ) as per D.S.R.NO. 13.4.1

80 MM THICK CC PAVER BLOCK OF M 30 GRADE WITH APPROVED COLOUR AND DESING AND PATTERN AS per D.S.R.NO. 16.91.2

Reinforced cement concrete work in beams.suspended floors, roof having slope up to 150 landings, balconies , shelves,chajjas,lintels, bands, plain window sills, staircases and spiral staircases above plinth level upto floor five level excluding the cost of centering , shuttering, finishing and reinforcement with 1:.1.5:3(1 cement : 1.5 Coarse sand (Zone III ) derived from natural sources : 3 graded Stone aggregate 20mm noinal size derived from natural sources (All work upto plinth)as per D.S.R.NO. 5.3

S/F Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars (DSR 2023 Item No- 5.22.1)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)10.28 AS PER DSR NO.

16.60 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 16.60.1 Overhead informatory road signage

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/sqm..... D.S.R. No. 12.1.1.

Providing and fixing 18 mm thick Granite Stone gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.AS PER DSR 8.2.2.2 Area of slab over 0.50 sqm

S/F INGRAUTION BLACK GRANITE STONE SIZE (0.6*0.75)