Uttar Pradesh Small Industries Corporation Limited Tender

Providing & Fixing MS Tube…... Complete item

Supply And Fixing of Valley Ball Net Complete item

Marking of Valley Ball Court

Supply and Fixing of Granite Stone Board …. Complete item

Supply And fixing of badminton Court net

marking of Badminton Court

Providing & Fixing MS Tube…... Complete item

Excavation in foundation in ordinary soil including lift up to 1.5mt. and lead up to 30mt. & including filling,watering & ramming of excaveted earth in to the trenches……….complete item

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km (5 miles) from the side of work & including watering ,dressing etc. Rate to include cost of all materials,labour and tools & plants,etc. required for proper completion of the work.

Concrete with 4cm. Stone ballast , fine sand of 1.25 F.M. and cement in proportion of 8:4:1 in foundation & under floors , including supply of all matrials , labour , T & P. etc required for proper completion of work.

M-150 Brick work in 1:6 one cement and coarse sand mortar in Foundation including supply of all materials labour t& P ………….complete item.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work using cement content as per approved design mix,including pumping of concrete to site of laying but including the cost of centering shuttering finishing and reinforcement including admixtures in recommended proportions as per IS :9103 to accelerate retard setting of concrete improve workabiltiy without impairing strength and durability as per direction of Engineer-in-charge.up to plint level

R.C.C works with cement approved coarse sand & 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C coloumns………..complete item.SI. No-289UP to Plinth

MS or iron work in plain work such as reinforced concrete wrought to required shape as necessary including bending for proper completion of the work. (Sch 504)

M-150 Brick work in 1:4 one cement and coarse sand mortar in super structure including supply of all materials labour t& P ………….complete item.

15 mm thick cement plaster 1:4…………..complete item.

12 mm thick cement plaster 1:4…………..complete item.

Providing wall putty on old surface with approved quality material of Berger/ J.K/ Birla or smiliar make 2 coats

Distempering with Dry Distemper of approved brand ( two Coats) and of required shade on undecorated wall surface to give an even shade over and including priming coat of whiting after thoroughly brushing the surface free from dropping & Other foreign matter including preparing the surface free from dropping & other foregin matter including preparing the surface even sand papered Smooth.

Providing And Fixing Hand rail of Approved by Welding etc.. MS Tube …… Complete Item

Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 04 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC 67 2012 retro reflective |sheeting with back frame MS angle of 35x35x5 mm. Legends, letters, numerals and borders etc should be as per MORTH specification No-801.3.7 The sheeting shall have a pressure sensitive adhesive of the aggressive-tack type requiring no heat, solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting, Micro prismatic type IV Retro reflective sheeting |Confirming to ASTM D4956-09 shall be Pressure fixed. The Retro reflective sheeting |shall be tested for a certificate or having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67-2012 & Proof of the same Report shall be uploaded which quoting |tende:. The rate shall include all materials, labour, T&P, transportation, installatic.. and incidentals all complete as per direction of the Engineer-in - charge MORTH 801