Uttar Pradesh Small Industries Corporation Limited Tender

Provinding and laying damp proof course 25 mm thick with cement concrete 1:2:4 (1 cement:2 coatrse sand (zone-iii):4 graded stone aggregate 12.5 mm (noimnal size) DSR/PWD4.10(A)

Brick work with common burnt clay (Non Modular) Bricks of class-150 in Superstructure above plinth level up to floor v level in all shape and sizes: cement mortar 1:4 (Coarse sand) DSR 6.4.1

1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size DSR/PWD 4.1.2

Centering and Shuttering including strutting propping etc. and removel of form work for (upto 5th floor) foundation ,footings base for column PWD/DSR 4.3.1

Steel reianforcement for r.c.c work including straightering,cutting bending placing in position and binding all complete upto plinth level.PWD/DSR5.22

12 mm plaster of mix 1:4 (coarse sand) DSR/PWD 13.4.1

Structural steel work in single section fixed with or without connecting plate including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer all complete. PWD/DSR10.1

Provinding and fixing 1st quality ceramic glazed wall tiles conforming to is:15622 (thickness to be specified by the manfacturee) of approved make,in all colour shades except burgundy,bottle black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 and jointing with grey slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.PWD/DSR 8.31

Provinding and fixing 1st quality ceramic glazed floor tiles of size 300 x 300 mm conforming to is:15622 (thickness to be specified by the manfacturee) of approved make,in all colour shades except white,ivory,grey fume red brown laidon 20 mm thick bed of cement mortar 1:4 and jointing with grey slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.PWD/DSR 11.38

Finishing Walls with putty approved brand and manfacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material labour T&P etc.required for proper completion of work.DSR/PWD new SI.NO.31

Finishing walls with exterior emulsion Paint (apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @1.25 ltr/10 sqm including one coat of primer applied 0.75lt/10 sqm coat curing amd cost of all material labour t&p etc.required for proper completion of the work.for two coat.SI.NO35

Painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surface upto 10 cm width or girth or small articles not exceeding 0.10 sqm in area with superior synthetic enamel such as luxol 3,hi gloss apcolite superlac dulex specified brushing to give and even shade and including the cleaning the surfacw of all dirt dust and other foreign matter sand papering and scrapping including cost of all materials labour,tools and plants etc.required for proper completion of work.PWD/DSR19.29+642/15.1.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work (Exposed in wall) (DSR 18.9.3)

25mm nominal outer dia pipe

40 mm nominal outer dia pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. : Concealed work, including cutting chases and making good the walls etc. (DSR 18.8.1)20mm Nominal outer dia pipes

Providing and fixing of following dia U-PVC pipeType-B Supreme class ISI marked pipe lines :

110mm dia

160 mm dia

Providing and fixing SWR PVC plain bend of required degree.110mm dia

Providing and fixing of 110x110mm Nahani trap Prince, supreme, Vectus or equivalant make class ISI marked U-PVC, SWR .

Providing and fixingwash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, includingpainting of fittings and brackets cutting and makinggood thewalls wherever require: White Vitreous China Wash basin size 450X 300 mm with a pair of 15 mmC.P.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17.1)25 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15mm nominal bore (DSR 18.21.2.1)15 mm nominal bore

Provinding and fixing white vitreous china water closet squating pan (Indian Type)Orissa pattern W.C.pan of size 580 x 440 mm 17.13.2

Provinding and fixing P.V.C Low level flushing cisten with manually controlled device (Handle lever ) conforming to is 7231 with all fitting and fixtures complete. 10 litre capacity white DSR 17.19.1

Supply & hoisting of low density polyethyiene seamless one peace moulded tank and placing the same in proper position including all labour, T&P etc DSR/PWD 18.48

Providing and fixing PTMT bib cock of approved quality & Colour (DSR 18.54.2) 15 mm nominal bore 122 mm long, weiting not less then 99 gms

Provinding and fixing c.p brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal size DSR/PWD 18.53.1

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 450x450 mm (DSR : 17.32.2)

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter (DSR : 19.21.1)

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge. (DSR : 9.119)

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. (DSR : 9.120)

1:2:4 (1 cement :2 coarse sand : 4 graded Stone aggregate 20 mm nominal sizePWD DSR 4.1.3

S/F of 4x2.5 feet size granite stone at site including writing painting with graving and cartage up to site complete/