Uttar Pradesh Small Industries Corporation Limited Tender

Lintels, beams, plinth beams, girders,bressumers and cantilever (DSR 5.9.5)

Suspended floors,roofs, landings, balconies and access platform (DSR 5.9.3)

M-150 brick work in 1:4 one cement and four coarse sand mortar in Superstructure including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (DSR 6.4.2)

Providing machine made Wire Cut Bricks where edges are sharp and borders are straight and Size of 8.5"x 4"x3" having Smooth surface finish with Compression Strength should be less than 105 kg/sq cm and Water absorption should not exceed 20%. Thickness of 230mm wall ANALYSIS.

M-150 brick work in 1:4 one cement and four coarse sand mortar in Superstructure including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (DSR 6.4.2)

Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall b 9.147B1.2 Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm.)

Providing / Fixing Stainless steel of small size such as grills, staircase railings etc wrought to required shape as necessary for required for and welding, grinding and making holes as required for completion of work. DSR 10.28

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 10.5.1 Using M.S. angles 40x40x6 mm for diagonal braces.DSR 10.5.1

Providing and fixing 30 mm thick PVC flush door shutter made out of one piece multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm etc all omplete. (DSR 9-118-2)

Providing and fixing factory made PVC door frame of size 50x4mm with a wall thickness of 5mm, The door frame to be fixed to the wall using MS screw complete as per manufacturer's specification and direction of Engineer-in-charge. (DSR 9-119)

12 mm thick cement plaster in single coat of fair side wall with 1 :4 cement & coarse sand including all labours, materials, T&P etc all complete. (DSR 13.4.1)

15 mm thick cement plaster in single coat of rough side wall with 1 :4 cement & coarse sand including all labours, materials, T&P etc all complete. (DSR 13.5.1)

Wiring Point for light/fan/fresh air Fan (Light duty exhaust Fan) 1.5 Sqmm FR PVC insulated multistrand single core copper conductor cable in heavy gauge PVC conduit with 1.5 sqmm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit (Sch. DSR 1.10) Group C (1.10.3)

Wiring of Circuit /Submain 1.5 sqmm FR PVC insulated multistrand single wire copper conductor cable but in PCV conduit with 1.5 sqmm FR PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit (Sch. Nos-DSR-1.14)

2X2.5 sqmm+1x2.5 sqmm earth wire 1.14.2

2X4.0 sqmm+1x 4.0 sqmm earth wire 1.14.3

4 X 10 sq. mm + 2 X 6 sq. mm earth wire1.14.10

Supply and drawing following UTP 4 Pair CAT-6 LAN cable RG-6 ….complate Sch no-DSR-1.53.1

S/F of LED Tube light with battern suitable for up to 1x22 watt LED tube light fitting including tube on surface complete in all respect …. Completed (pwd-23.08)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.1.31

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.1.32

Supply & fixing of recess mounting round 36 to 46 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.pwd-23.05

S/F of Sheet steel enclosure surface/flush mounting fitted with 25 AMP modular Soket with 25 Amp MCB .. Complete. 1.57

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply and fixing of 6 watt to 9 watt LED (spot light) fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use as a Decorative Mirror Light) PWD- 23.01

Single pole