Uttar Pradesh Small Industries Corporation Limited Tender

Concrete with 4 cm.gauge brick ballast, Fine sand of 1.25 F.M. and cement,in propotion of 8:4:1 in foundations and under floors, including supply of all matrerials, labour, Tools & plants etc. required for proper completion of the work.

M-150 Brick work in 1:4 cement & Fine Sand 1.25 F.M. mortar in foundation and Plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work.

12 mm thick Cement sand plaster in 1:4 cement sand …complete item.

Finishing of wall with cement Primer & three coat of water proof cement paint…… complete item (item no.660+66)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). DSR- 11.20.4

Providing and designing and fixing of Air Walker of size 1100 X 550 X 1400 mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing base plate cover shall be made of virgin LLDPE plastic by rotational moulding with minimum 4mm thickness UV resistant color as approved by engineer in charge .High quality grip rubber should be used on handles. Foothold shall be made od nylon alloys with rounded edges to prevent impact and injury. Maintenance free bearings should be used in equipment manufactured by reputed company duty oil sealed and self lubricated to be approved by engineer in charge. Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely .

Providing and designing and fixing of Pull Chair in a pair of size 2000x550x1600 mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing . Handle bars are to be provided with high quality grip rubber on top end. Pedals shall be made up nylon alloy with rounded edges to prevent any impact of injury. Seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4 mm , colorful and UV resistant and environmental friendly. Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely .

Providing and designing and fixing of Rowing Machine of size 1280X800X1150mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing . Handle bars are to be provided with high quality grip rubber . Foot hold shall be made up of nylon alloy with rounded edges to prevent any impact of injury . Base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4 mm , colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free , duty oil sealed and self lubricated made by reputed company to be approved by engineer in charge .Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely .

Providing and designing and fixing of Arm Wheel in a pair of size 850X800X1800mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing . Handle bars are to be provided with high quality grip rubber on top end. Pedals shall be made up nylon alloy with rounded edges to prevent any impact of injury. Seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4 mm , colorful and UV resistant and environmental friendly. Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely .

Providing and designing and fixing of Twister of size 1700X1300X1300mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing . Handle bars are to be provided with high quality grip rubber foothold shall be made up of nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4 mm , colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free , duty oil sealed and self lubricated made by reputed company to be approved by engineer in charge .Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely .

Providing and designing and fixing of Seated Chest Press in a pair of size 1800X700X2000mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing . Handle bars are to be provided with high quality grip rubber pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4 mm , colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free , duty oil sealed and self lubricated made by reputed company to be approved by engineer in charge .Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely .

Providing and designing and fixing of Leg Press of size 2000X550X1600mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing . Handle bars are to be provided with high quality grip rubber on top end, pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury . Seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4 mm , colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free , duty oil sealed and self lubricated made by reputed company to be approved by engineer in charge .Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely .

Providing and designing and fixing of Air Swing in pair of size 1150X900X1250mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing . Handle bars are to be provided with high quality grip rubber on top end, pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury . Seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4 mm , colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free , duty oil sealed and self lubricated made by reputed company to be approved by engineer in charge .Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely .

Providing and designing and fixing of Double Cross Walker of size 1600X600X1600mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing . Handle bars are to be provided with high quality grip rubber on top end, pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury . Seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4 mm , colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free , duty oil sealed and self lubricated made by reputed company to be approved by engineer in charge .Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely .

Providing and designing and fixing of Horse Rider Station of size 1000X600X1100mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing . Handle bars are to be provided with high quality grip rubber on top end, pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury . Seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4 mm , colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free , duty oil sealed and self lubricated made by reputed company to be approved by engineer in charge .Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely

Providing and designing and fixing of Weight Lifting of size 1100X400X1300mm fabricated with main post of B-class GI Pipe and minimum 114mm dia and other pipes of 88/60/32/28 mm dia and joints scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing . Handle bars are to be provided with high quality grip rubber on top end, pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury . Seat to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 4 mm , colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free , duty oil sealed and self lubricated made by reputed company to be approved by engineer in charge .Equipment to be firtted inbuilt limiters to prevent unwanted movement.All open ends of pipe to be closed by GI / LLDPE caps for user safely .

Frieght of equipment-3% of equipment cost)

Installation of Gym Equipment

Supply and Fixing of Sign board

Photography Charge