Uttar Pradesh Rural Road Development Agency Tender

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.Naturally Gravel/Red Moorum

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1..

Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections

Scrapping of existing painted surface and making surface clean and levelled for upper layers as per direction of Engineer-In-Charge. A) Area with painted surface in 60% ok Condition.(Including Lavies, Labour cess & all taxes but without GST)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Providing ,Laying spreading & compacting stone aggregate of specific sizes (45.63 mm) to water bound macadam specification including spreading in 75 mm layer thickness, handpacking,rolling with smooth wheel roller 80 - 100 KN in stages to proper grade and camber,applying & brooming,screening/binding materials to fill up the intersices of coarse aggrgate,watering & compacting to the required density grading 2 as per Technical Specification Clause 405. (Including Lavies, Labour cess & all taxes but without GST)

Providing ,Laying spreading & compacting stone aggregate of specific sizes (22.4-53) in 75 mm layer thickness to water bound macadam specification including spreading in uniform thickness, hand packing,rolling with smooth wheel roller 80 - 100 KN in stages to proper grade and camber,applying & brooming, screening materials to fill up the intersices of coarse aggrgate,watering & compacting to the required density as per Technical Specification Clause 405 of MORD.(Including Lavies, Labour cess & all taxes but without GST)

Providing & applying primer coat with SS Emulson on prepared surface of granulat base including cleaning of road surface and spraying primer at the rate of 0.7 - 1.0 kg/sqm using mechanical means as per Technical Specification class 502.(Including Lavies, Labour cess & all taxes but without GST)

Pre-coating of chips with 1 per cent of paving bitumen by weight of chips in a suitable mixer duly heated to 160 degree C as per Technical Specification Clause 507.2.5 (Including Lavies, Labour cess & all taxes but without GST)

Providing and laying surface dressing (19 mm nominal size chipping) as wearing course in single coat using precoated crushed stone aggregates of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8-10 tonne smooth wheeled steel roller Technical Specification Clause 507.2.5 (Including Lavies, Labour cess & all taxes but without GST)

Providing and laying surface dressing (13 mm nominal size chipping) as wearing course in single coat using precoated crushed stone aggregates of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8-10 tonne smooth wheeled steel roller Technical Specification Clause 507.2.5 (Including Lavies, Labour cess & all taxes but without GST)

Brick edging labour rate only on both side of the 1st class brick 8 cm. (3") wide and 12 cm. (4 1/2) deep laid with mud mortor all labour finished to the required template and in proper alignment and also including dressing and remming the excavated earthe as directed by Engineer-In-Charge.(Including Lavies, Labour cess & all taxes but without GST)

Brick soling with straight over burnt bricks laid on edge i/c prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading blinding coat of i cm depth of local earth or sand over the entire surface &i/c T&P labour etc.(Including Lavies, Labour cess & all taxes but without GST)

Construction of Panel concrete plain Cement concrete pavement, Thickness as per design, over a prepared subbasewith 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate no exceeding 25mm, mixed in a concrete mixer of not less that 0.2 cum capacity and appropriate weigh batcher uusing approved mix design , laid in approved fixed side formwork ( Steel Channel, Laying and fixing of 125 micron thiock polythene film , wedges, steel plates including levelling th formwork as per Drawing ), Spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and fininshedin continous operation including provision of contraction and expansion, construction joints , applying debonding strips, primer, sealant , dowel bars, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14 days. curing compound ( Where specified ) and water finishing to lines and grade as per drawing and Technical specification Clause 1501. PCC Grade M-30 Each Panesl ( 0.50 X0.50 ) thickness 125mm (Including Lavies, Labour cess & all taxes but without GST)

Supplying, fitting, and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202 (Including Lavies, Labour cess & all taxes but without GST)

Providing and fixing of Logo sign board at starting point & Intermediate distance with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle Technical Specification Clause 507.2.5 (Including Lavies, Labour cess & all taxes but without GST)

Providing and fixing of reflective typical PMGSY logo and informatory sign board with a corrosion resitant 3mm and 4mm thick aluminum composite panel face to be fully covered with DM 5600 engineering grade prismatic / equvivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle Technical Specification Clause 507.2.5 (Including Lavies, Labour cess & all taxes but without GST)

Providing and fixing of reflective Citizen information sign board with a corrosion resitant 4mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle Technical Specification Clause 507.2.5 (Including Lavies, Labour cess & all taxes but without GST)

Providing and fixing of Maintenance information sign board with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle Technical Specification Clause 507.2.5 (Including Lavies, Labour cess & all taxes but without GST)

Direction Sign Boards(including Caution Bard)(Including Lavies, Labour cess & all taxes but without GST)

Village Name Sign Board(Including Lavies, Labour cess & all taxes but without GST)

Kilometer Stones(Including Lavies, Labour cess & all taxes but without GST)

5th Kilometer Stones(Including Lavies, Labour cess & all taxes but without GST)

Hectometer Stones(Including Lavies, Labour cess & all taxes but without GST)

Construction of Referene Pillars (BW in cement Mortar 1:3 cement coarse sand) (Including Lavies, Labour cess & all taxes but without GST)

Construction of Reference /Temprary Bench Mark (BW in cement Mortar 1:3 cement coarse sand) (Including Lavies, Labour cess & all taxes but without GST)

Providing and fixing of precast RCC Guard Stone in M20 Nominal Mix (Including Lavies, Labour cess & all taxes but without GST)

Providing and laying Road Marking with hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. As per IRC 35-2015(Including Lavies, Labour cess & all taxes but without GST)

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side (Including Lavies, Labour cess & all taxes but without GST)

Providing concrete for plain/reinforced concrete M10 (1:3:6) in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (Including Lavies, Labour cess & all taxes but without GST)

Fillling in foundation trenches using coarse sand/ screening as per drawing and technical specification Clause 305.3.9 (Including Lavies, Labour cess & all taxes but without GST)

Brick masonry work in cement mortar in substructure complete excepting pointing and plastering, as per drawing and technical specification Clauses 602, 603, 604, 1202 & 1204 (1:3) (Including Lavies, Labour cess & all taxes but without GST)

Providing and laying reinforced cement concrete 1000mm dia pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry (1000) (Including Lavies, Labour cess & all taxes but without GST)

Providing and laying reinforced cement concrete 600mm dia pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry (600) (Including Lavies, Labour cess & all taxes but without GST)

Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 (Including Lavies, Labour cess & all taxes but without GST)

Plastering with cement mortar (1:4), 15mm thick on brickwork in substructure as per technical specification (Including Lavies, Labour cess & all taxes but without GST)

Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701 (Including Lavies, Labour cess & all taxes but without GST)

Two coat white washing as per sor kanpur circle (chapter 16 item no 672) (Including Lavies, Labour cess & all taxes but without GST)

CC coping M-15 (Including Lavies, Labour cess & all taxes but without GST)