Uttar Pradesh Rural Road Development Agency Tender

Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity inacaluding cutting and loading in tippers, trimming and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location with lift up to 1.5 m and lead up to 1000 m as per Technical Specification clause 302.3( For Treach) (Including all taxes but excluding GST)

Granular Sub-base with well Graded Material (Table:- 400-1) Mix in Place Method (Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.) for grading- I Material. (Including all taxes but excluding GST)

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.(Including all taxes but excluding GST)

Construction of Panel plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade), coarse and fine aggregate not xeceeding 25 mm, mixed in concrete mixer of not less than 0.2 cum capcaity and appropriate weight batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel paltes including levelling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including porovision of contraction and expansion, construction joints applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.PCC Grade M-30 Each Panel(0.50x0.50) thickness 125mm) (Including all taxes but excluding GST)

Supply of 80mm thick precast cement concrete I shape interlocking paver block ISI mark confirming to IS : 15658-2006 with top layer of minimum 5 mm thickness having plan dimension 200 x (160+120 mm) of O.P. Cement, Smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40 MPa and weight 4.50 kg per including cost of material with a blanket layer of 4.00 cm thick fine sand including labour, T&P etc required for proper completion of the work as directed by Engineer-in-charge. (Including all taxes but excluding GST)

Excavation in foundation in ordinary soil(Loam clay or sand) including lift up to 1.50 mt and lead up to 30 M and including filling watering and ramming of excavated earth in to th treanches of in to the space between the building and the sides of foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by the engineer-incharge up to distance of 30 M. from the foundation treanch.(Including all taxes but excluding GST)

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6 (Including all taxes but excluding GST)

Brick masonry work in cement mortar 1:4 as per drawing and technical specifications Clauses 600, 900 and 1208.(Including all taxes but excluding GST)

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 Random Rubble masonary 1:4.(Including all taxes but excluding GST)

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 20 Nominal mix 1:2:4 (Including all taxes but excluding GST)

Plastering with cement mortar (1:4), 12 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204(Including all taxes but excluding GST)

Providing, laying & fixing of PVC Pipe (110 mm dia) for beep holes, complete as per drawing and technical specifications.(Including all taxes but excluding GST)

Providing concrete for plain/reinforced concrete M-25 in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203(Including all taxes but excluding GST)

Supplying, fitting, and placing MS/TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202(Including all taxes but excluding GST)

Laying brick soling layer on prepared sub-grade S.O.B. brick on end edging accaording to lines,graded and cross-section shown on the drawing filling joints with sand and earth, speading 25 mm thick layer of earth over brick soling, watering and rolling the same with three wheeled road roller 80-100 kN as per Technical Specification Clause 412(Including all taxes but excluding GST)

Renewal (Part 3)

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.(Including all taxes but excluding GST)

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502.(Including all taxes but excluding GST)

Providing & applying tack coat withBitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 kg per sqm on the prepared granular surface treated with primer cleaned with hydroulic broom as per Technical Specification Clause 503.(Including all taxes but excluding GST)

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous VG-30 binder @ 5.40 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects. Using Waste Palstic. (Including all taxes but excluding GST)

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703-5th Kilometre Stone (precast)(Including all taxes but excluding GST)

Ordinary Kilometer Stone (Precast)

200 m stone (precast)

Providing and fixing of reflective typical PMGSY logo and informatory sign board with a corrosion resitant 3mm and 4mm thick aluminum composite panel face to be fully covered with DM 5600 engineering grade prismatic / equvivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle (Including all taxes but excluding GST)

Providing and fixing of reflective Citizen information sign board with a corrosion resitant 4mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle (Including all taxes but excluding GST)

Providing and fixing of Maintenance information sign board with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle(Including all taxes but excluding GST)

Providing and fixing of Logo sign board at starting point & Intermediate distance with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle (Including all taxes but excluding GST)

Providing and fixing Retro-Reflective cautionary mandatory and informatory signs as per IRC 67 with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle. (800x600 MM)-Rectangular(Village Board) (Including all taxes but excluding GST)

Providing and fixing Retro-Reflective cautionary mandatory and informatory signs as per IRC 67 with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle.(600x600 ) Equilateral triangle(Direction/Cautionary Board)

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5(Including all taxes but excluding GST)

Providingand laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of work. (Including all taxes but excluding GST)