Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited - UPRVUNL Tender
Paints and Enamels
Eprocure
Opening Date6 Sep 2024
Closing Date19 Sep 2024
Tender Amount₹ 11,90,799
Costs
EMD
₹ 23,000Document Cost
₹ 1,180Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RVUNL_953172_1Bid Award Id
ViewTender No
18/SE(CMC-I)/CMD-II/2024-25Tender Authority
Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited ViewPurchaser Address
-Website
http://https://uprvunl.org/uprvunl
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Repairing of old damaged boulder pitching including dismantling, relaying of pitching including preparation of surface to proper slope & by using old dismantling boulder including cost of all materials, labour, T&P etc. required for proper completion of work.
3
-
25.5
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
1
-
5218.18
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)
8
-
5403.6
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
3
-
4678.22
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
3
-
4906.44
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size).
1
-
5661.19
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
1
-
6183.35
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
1
-
7886.44
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
50
-
70.76
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers
5
-
467.84
12 mm cement plaster:1:6 (1 cement : 6 fine sand)
50
-
223.35
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
25
-
422.33
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
2
-
873.14
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colors such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
2
-
785.51
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50
-
72.92
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In lime mortar with old mughal bricks
1
-
1077.92
Chipping of RCC/PCC floor with the help of chisel and hammer up to required depth.
5
-
7.13
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead
10
-
33.05
Providing high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required
5
-
384.11
Re-arranging & fixing of AC/GC sheets come out from heavy storm on all elevation including providing jhooks required as directed by engineer-in-charge.
5
-
23.3
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet
5
-
103.31
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:Asbestos sheet
5
-
48.22
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.
25
-
22.25
Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post(cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire
100
-
10.17
Cleaning of roof at all elevation in C.I.S.F. colony filled approx. 10cm. with coal, dust, fly ash, waste materials etc. including its disposal in dust bin at specified bran including supply of all labour, T&P etc.
25
-
3.75
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below
1.5
-
90.3
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area beyond 3 sq. metres
1
-
119.24
Providing and fixing of A.C. Down pipes with all fittings such as clamps, screws etc. all complete.(A) 100mm dia.(excluding cost of pipe).
5
-
11.05
Fixing of AC/GC sheeting roofing/walling at all elevation of C.I.S.F. colony including cost of J or U hooks, GI clamps and bitumen, washer etc. including supply of all materials, labours etc. required for completion of work (sheet shall be supplied by department.)
12
-
23.3
Fixing of GC/AC ridges, curved ridges at all elevation of C.I.S.F. colony including cost of J or U hooks, GI clamps and bitumen, washer etc. including supply of all materials, labours etc. required for completion of work ( ridges, curved ridges shall be supplied by department.)
3
-
13
Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5.5 mm thick instead of 4 mm thick.
3
-
226.78
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.125x70x4 mm (ordinary type)
12
-
144.15
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type)
12
-
82.5
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m²
12
-
775.42
Supply & fixing of PVC pipe having 110mm outer dia and 100mm inner dia ISI Mark 6Kg/cm2 with bend of 110mm dia ISI Mark and grouting and including supply of 15cm. long 6mm dia clamp including supply of all materials, labours, T&P etc. required for proper completion of work.
12
-
254.75
Scraping and removing old and worn out tar felt and grit from GC/AC roofing, RCC roofs at all elevations as and where required including cleaning the surface properly so as to make free from all foreign materials and disposal of the same in the dust bin or as directed by Engineer-in- charge including cost of materials, labours, T&P etc. required for proper completion of work.
25
-
8.8
Dismantling and removal of loose and broken fillet at the junction of roof and parapet wall as per direction by Engineer-in- charge including cleaning of surface to make it free from all foreign materials and disposal of the same in the dust bin as directed including cost of all labours, materials, T&P etc. for proper completion of work.
3
-
4.4
Making 100X100mm size fillet at the junction of slab and wall in CC 1:2:4 on the locations as directed by Engineer-in- charge including cost of all labours, materials, T&P etc. for proper completion of work.
5
-
14.4
Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) ,sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete.
25
-
545.97
Spreading of bitumen grade 85/25 after heating to required temperature over leaky roof @ 1.7kg./sqm. Including sweeping, cleaning scraping of roof with wire brush to revise dust and other waste materials and spreading necessary quantity of coarse sand @ 0.002 M3/M2 (1 Cft. Per 100 Sft.) including supply of all materials, labours, T&P etc. required for proper completion of work.
50
-
31
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately):sal wood
0.1
-
89260.34
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) but in Country wood/ head wood work.
0.15
-
10788.8
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Kiln seasoned selected planks of sheesham wood 35 mm thick shutters
4
-
2704.75
Fixing chowkhats in existing opening including embedding chowkhatsin floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per irections of Engineer-In-Charge.Door chowkhats
1
-
1158.35
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumpingground, all complete as per directions of Engineer-In-Charge.Window chowkhats
2
-
727.88
Easing of old door and window shutters in position & minor repairing work as required for proper completion of the door, windows including cost of all labours, T&P etc. for proper completion of work
50
-
25
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Up to 10 mm thick
6
-
5.08
Supply & fixing 3mm thick Commercial ply wood in false ceiling and wooden partition etc. including cost of all labour, material, T&P etc. required for proper completion of work.
5
-
130
Supply and fixing of Country wood beading of size 50X10mm on windows, false ceiling, and wooden partition etc. including cost of all labours, materials, T&P etc. required for proper completion of work.
12
-
11.1
Supply and fixing of salwood beading of size 50X10mm on windows, false ceiling, and wooden partition etc. including cost of all labours, materials, T&P etc. required for proper completion of work.
12
-
16.65
Supply and fixing of following type of door/window oxidized fitting including supply of all material, labour, T&P etc required:a) L-drop 250mm long of 20mm dia
7
-
36.65
Supply and fixing of following type of door/window oxidized fitting including supply of all material, labour, T&P etc required:b) Handles 150mm
7
-
8.9
Supply and fixing of following type of door/window oxidized fitting including supply of all material, labour, T&P etc required:c) Tower Bolts 300mm long
7
-
19.1
Supply and fixing of following type of door/window oxidized fitting including supply of all material, labour, T&P etc required:d) Hinges 100mm long
24
-
8.2
White washing with lime to give an even shade : Old work (two or more coats)
200
-
14.19
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
125
-
12.03
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
150
-
15.47
Painting with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade : One or more coats on old work
50
-
67.75
Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.
50
-
73.9
Fixing of old doors/windows shutters (to be supplied by Department free of cost or taken out from any place) after proper repairing and rectification of damaged portion, replacement of all the fittings of oxidized iron heavy quality hinges, stoppers, cleats etc. as directed by engineer-in-charge including cost of all fittings and also including cost of replacement of damaged portion.
12.5
-
68.65
Running and operation of Tube Wells installed on the river bank for CISF colony round the clock in all two shifts, including guarding and minor maintenance of motor and pump such as oiling of pump, greasing of motor bearing as required from time to time and making water tight by supply and fixing grease and gland dori in sluice valves NRV which are situated near pump and water tank and also filling of water tank and to be delivered to colony thrice every day on time as specified by Engineer-in-charge. All arrangements to be made for S/F of required fuse as and when required (months including calendar days, water supply has to be maintained during normal days, gazette holiday and National Holidays.)
6
-
47344.7
Replacing of 50HP Motor in case of some defects occur in the motor after taking out the defective motor and keeping in store at CISF Colony and fixing other motor which is available in store at any place of Power House/ colony including transporting and arrangements required for the work to be done by the contractor at his own cost including all labour T&P etc. complete.
1
-
747
Removing defective sluice valve and re-fixing new sluice valve of 200 mm sizes including all labour, T&P etc. required for proper completion of work (labour rate only).
1
-
52.5
Removing defective sluice valve and re-fixing new sluice valve of 150mm sizes including all labour, T&P etc. required for proper completion of work (labour rate only).
1
-
52.5
Removing defective sluice valve and re-fixing new sluice valve of different sizes including all labour, T&P etc. required for proper completion of work (labour rate only) :Non return valve 150mm.
1
-
52.5
Removing defective sluice valve and re-fixing new sluice valve of 80mm sizes including all labour, T&P etc. required for proper completion of work (labour rate only).
1
-
45
Taking out the sluice valve and removing the defects occurred in same valve including dori, greasing the gaskets except spindle and all material, labour T&P etc. required for proper completion of work in the colony and river side Tube Well area as per the direction of Engineer-in-charge: Sluice valve 150/80mm.
2
-
1165.5
Taking out the sluice valve and removing the defects occurred in same valve including dori, greasing the gaskets except spindle and all material, labour T&P etc. required for proper completion of work in the colony and river side Tube Well area as per the direction of Engineer-in-charge: Sluice valve 200mm.
1
-
1195.5
Taking out the Non return valve and removing the defects occurred in same valve including dori, greasing the gaskets except spindle and all material, labour T&P etc. required for proper completion of work in the colony and river side Tube Well area as per the direction of Engineer-in-charge: Non return valve 150mm.
2
-
826.5
Removing of R.C.C. cover on the opening of roof slab, after detaching of motor to bring out discharge lead, column pipe oil tube, line shaft connected bearings and bowl assembly in such a manner that the threading of pipe, shaft, oil tube should not be damaged including all labour T&P etc. required for proper completion of work.
1
-
1581
Cleaning of Bowl assembly column pipe oil tube, shaft & bearings with wire brush and kerosene oil in such a way that threads should not be damaged including cost of all labour T&P etc. required for proper completion of work.
1
-
1102.5
Fitting Bowl assembly and providing proper clearance, gland dori, bush locking ring, lowering the Bowl assembly with column pipe, oil tube line shaft bearing, fitting the discharge head motor and commissioning of tube well including cost of all labour T&P etc. and filling the oil in oil tube including cost of mobil oil etc. required for proper completion of work (Damage spare parts shall be issued free of cost by the department to the contractor).
1
-
2637
Rectifying of leakage in existing pipe line and removing the same, including cutting welding or by providing and fixing flanged joint with welding/nut bolts complete including all cost of materials, labour T&P etc. (Electric arrangements and welding rod charges shall be born by the contractor).
3
-
481.5
Rewinding of 50HP Jyoti Make or any other inductor vertical motor starter having RPM 1455 with IOC Super enamel copper wire including terminal bolts & nuts, check nuts, lugs, terminal plates and terminal bushing with B-class insulation (i.e.) mica sheet leatheriest insulation, paper glass, clothes sleeves with insulation varnish of Dr. Beck make, wire of same gauge will be used as in old motor including Terminal bolts and terminal plates suitable for 50HP motor including cost of all T&P etc. for proper completion of work including taking out the motor from store and then keeping in store after rewinding. (Burnt copper wires cost will be deducted from the contractor’s bill @ Rs. 50.00 per Kg. on 20 Kgs. Of copper wire and the burnt copper wire will be given to the contractor).
1
-
13942.5
Turning and fitting sleeves in bearing housing of motor including cost of all labour, T&P etc complete.
1
-
577.5
Minor repair of starter of 50 HP motor including opening of the system, cleaning sand papering all carbonized parts, replacing any damaged parts including supply of all labour T&P etc. (Damaged parts shall be supplied free of cost by the Department if required) but S/F of fuse as and when required including fixing of starter on the board and making necessary connection etc. complete.
2
-
150
Carriage and supply of drinking water from water treatment plant to distribute in CISF colony with Nigam’s water tanker by contractor’s tractor as per the Engineer-in-charge.
1
-
145.5
Supply and fixing moving contact and fixed contact of 50 HP starter including opening out and minor repair and rearranging the starter.
6
-
60
Overhauling the 150/200 mm. sizes of sluice valve after opening including greasing replacing the MS Spindle with check nut and nut & bolts as required rubber packing etc. including cost of all material labour T&P etc. complete for proper completion of work.
2
-
1773
Overhauling the 100/80 mm sizes of sluice valve after opening including greasing replacing the MS Spindle with check nut and nut & bolts as required rubber packing etc. including cost of all material labour T&P etc. complete for proper completion of work.
1
-
1125
Centering and shuttering including strutting, propping etc and removal of form for: - Foundation, Footing, base of column etc for mass concrete.
7
-
241.4
12mm cement plaster of mix 1:4(1 cement: 4 fine sand).
7
-
4.64
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
2
-
1472.42
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(steel should be provide free of cost by the department)
0.1
-
21333.12
Dismantling of existing acid / Alkali proof lining (brick/tiles) from the side and bottom of neutralizing tank, efficient drains, floors, foundations, drains, pits etc. in patches as and where required by Engineer-in-Charge including chipping and cleaning of acid proof mortar, stacking of serviceable brick /tiles after cleaning the mortar etc. from it in site store and disposal of the refused material in nearest dust bin.
25
-
38.32
Dismantling of existing Chemical resistant bitumastic lining from the bottom and sides of neutralizing pits, drains, trenches foundation, and disposal of the same in the nearest dust bin. including cleaning of Concrete or plastered surface, expanded metal etc. thoroughly as directed by Engineer-in-charge.
25
-
22.62
Providing and applying of Chemical resistant bitumastic on previously protected surface on bed and sides of neutralizing pits, efficient drains, trenches, foundation in patches including painting the clean surface with one Coat of Chemical resistant bituminous paint including cost of all material, labour T&P etc. required for proper completion of work:25 mm thick bitumastic
7
-
1339.87
Providing and applying of Chemical resistant bitumastic on previously protected surface on bed and sides of neutralizing pits, efficient drains, trenches, foundation in patches including painting the clean surface with one Coat of Chemical resistant bituminous paint including cost of all material, labour T&P etc. required for proper completion of work15 mm thick bitumastic
18
-
789.71
Providing and applying of Chemical resistant bitumastic on previously protected surface on bed and sides of neutralizing pits, efficient drains, trenches, foundation in patches including painting the clean surface with one Coat of Chemical resistant bituminous paint including cost of all material, labour T&P etc. required for proper completion of work:25 mm thick bitumastic on new concrete on plastered surface after applying three coats of bituminous paint
5
-
1348.95
Providing and applying of Chemical resistant bitumastic on previously protected surface on bed and sides of neutralizing pits, efficient drains, trenches, foundation in patches including painting the clean surface with one Coat of Chemical resistant bituminous paint including cost of all material, labour T&P etc. required for proper completion of work:15 mm thick bitumastic on new concrete on plastered surface after applying three coats of bituminous paint
20
-
798.79
Providing and laying 75mm. thick Acid/Alkali proof brick lining in acid resistant mortar of approved quality over 6 mm thick bedding and 6 mm wide joints with A.R. Bricks size of 230x115x75 mm on the walls of neutralizing tanks including cost of all material labour T&P Scaffolding etc. required for proper completion of work as specifications and direction of Engineer-in-Charge.
5
-
2483.22
Providing and Laying 40 mm. thick Acid/Alkali proof lining in effluent drains, trenches, foundation with A.R. tiles of size 230x115x40 mm laid in acid resistant mortar of approved quality mortar 6 mm. thick mortar bedding and 6 mm. wide joints including cost of all materials, labour and T&P etc. required for proper completion of work.
25
-
1717.08
Providing and Laying 40 mm. thick Acid/Alkali proof lining in effluent drains, trenches, foundation with A.R. tiles of size 230x115x40 mm laid in acid resistant mortar of approved quality mortar 6 mm. thick mortar bedding and 6 mm. wide joints including cost of all materials, labour and T&P etc. required for proper completion of work.(Excluding the cost of A.R tiles,with old and used A.R. tiles, which shall be issued from department free of cost).
5
-
859.08
Racking the joints to a depth of 15 mm. Acid/ Alkali proof lining work and pointing the same with C.N.S.L. Resin and C.N.S.L. powder manufactured by M/s Cormandal Prodorite Madras, as specification and direction of Engineer-in-Charge including cost of all materials, labour , T&P etc. including scaffolding, curing the pointing with acid of desired concentration as Tech. specifications.
25
-
262
Racking the joints to a depth of 15 mm. Acid/ Alkali proof lining work and pointing the same with C.N.S.L. Resin and C.N.S.L. powder manufactured by M/s Cormandal Prodorite Madras, as specification and direction of Engineer-in-Charge including cost of all materials, labour , T&P etc. including scaffolding, curing the pointing with acid of desired concentration as Tech. specifications but for old existing lining works
5
-
267.55
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand).
3
-
6432.58
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
50
-
117.67
Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
100
-
23.05
White washing with lime to give an even shade : New work (three or more coats).
250
-
24.19
Finishing walls with water proofing cement paint of required shade :Old work (one or more coats @ 2.20 kg/10 sqm) complete.
250
-
50.3
Re-lettering with black Japan paint of approved brand and manufacture.
50
-
2.54
Cleaning of column, beam, floors, A.C sheets with necessary chipping of mortar etc including scrapping of sarface with steel wire brush , broom stick eyc, including all labour material, T & P, scaffolding etc, required for proper complection of work.
1000
-
1.71
Cleaning of sump of cooling tower by way of excavation silt/earth/ash as in muddy condition and stacking the same with distance of 30M at he near by ground level including all labour, T & P etc required for complection.
50
-
40.55
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.
25
-
218.6
White washing with lime to give an even shade on Old work (one or more coats).
500
-
8.69
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer.
37.5
-
50.85
Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
50
-
48.35
Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works.
133
-
42.97
Finishing walls with water proofing cement paint of required shade excluding cost of priming coat.
500
-
10.75
Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm).
500
-
77.33
Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.
1200
-
44.24
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work.
700
-
71.74
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.
450
-
103.01
Lettering with black Japan paint of approved brand and manufacture.
250
-
3.98
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade Old work (one or more coats).
2000
-
29.78
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and excluding priming coat with cement primer.
1500
-
50.67
Providing and Applying one priming coat and one coat of oil bound distemper of approved quality and shade on new work including cost of all material, labour, T&P etc. required for proper completion of work.
50
-
27
Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 100 mm diamete
5
-
53.77
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter
5
-
268.69
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :150 mm diameter
2.5
-
423.9
Cleaning of chocked W.C. seat by removing unserviceable materials and disposal of same at suitable location as per direction of the Engineer-in-charge including of all labours, T&P etc.
5
-
14.65
Cleaning of chocked septic tanks of area above 5M2 but below 8M2 removing RCC/M.S. covers & placing the same after removal of chocking, disposal of the debris etc. at the suitable location as per direction of the Engineer-in-charge for proper completion of work
4
-
392
Cleaning of chocked septic tanks above 8M2 removing RCC/M.S. covers & placing the same after removal of chocking, disposal of the debris etc. at the suitable location as per direction of the Engineer-in-charge for proper completion of work.
2.5
-
523
Brooming and cleaning of road and patries etc. Alternate day including scrapping of Grass, wild vegetation along the roadside Patries upto roadside drain, cleaning of drain man holes, collection of the Debris and other materials and disposal of the same in the dustbin including cost of all materials, labour, T&P etc. required for proper completion of workin the firmly residence 150% rates for road cleaning and 50% rates for side patries, scraping and cleaning of grass.
6
-
3917
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
1250
-
5.42
Weekly cleaning of covered/uncovered drains directly connected with house, drains for resident and non resident buildings kachcha/pucca having section of 0.7M approx including taking out sludge, rubbish, garbage, brick bats, stone bats, vegetation etc. including uprooting vegetation from inside of outside or at the bank of the drains and collection of the same within 100M in dustbin or at places specified by Engineer-in-charge and also removing blockage of storm water during rains with cost of all labours, materials, T&P required for proper completion of the work.
6
-
985
Disposal of big dead animal bodies outside the colony area up to a distance of 3kms. Or as per direction of Engineer-in-charge including all labour, T&P cartage etc. for proper disposal (cows, buffaloes etc.)
6
-
415
Disposal ofsmall dead animal bodies outside the colony area up to a distance of 3kms. Or as per direction of Engineer-in-charge including all labour, T&P cartage etc. for proper disposal (dogs, cats etc.)
10
-
111
Scraping of area by spade up ground level as directed by Engineer-in-charge including removal of roots, grass, wild vegetations, boulders, brick bats and other waste materials, scrap etc. and disposal of the debris up to 100M in dustbin inside colony or at place as per direction of Engineer-in-charge including supply of all labour, T&P etc. required for proper completion of work.
250
-
2.5
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil.
5
-
154.11
Cleaning of chocked manholes/ chambers of different sizes, removing refuses, rubbish, night soil etc. disposal outside colony area including removing and refixing cover cement
80
-
44
Cleaning of chocked sewer line of S.W./ E.L./ P.V.C. without removing of existing line with special T&P including cost of labour T&P etc. required for proper completion of work including disposal of soil as per direction of Engineer-in-charge
1000
-
2.35
Dismantling of different size G.I./C.I./M.S. pipe and stacking the same in store after cleaning the serviceable pipe including cost of all labour, T&P etc. required for the proper completion.(a)15 mm dia to 40 mm dia
375
-
6.27
Dismantling of different size G.I./C.I./M.S. pipe and stacking the same in store after cleaning the serviceable pipe including cost of all labour, T&P etc. required for the proper completion(b) 50 mm dia and above
125
-
10.12
Fixing new/old & used G.I./C.I. M.S. pipe of the under mentioned diameter including supply of G.I. fitting of approved quantity also including cost of all labour, materials, T&P etc. required for the proper completion of work.(a) 15 mm dia up to 40 mm dia.
375
-
16.32
Fixing new/old & used G.I./C.I. M.S. pipe of the under mentioned diameter including supply of G.I. fitting of approved quantity also including cost of all labour, materials, T&P etc. required for the proper completion of work(b) 50 mm dia & above.
125
-
31.2
Providing and fixing PTMT pillar cock of approved quality and colour:15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
3
-
178.01
Providing and fixing brass bib cock of approved quality size 15mm normal bore.
2.5
-
256.4
Supply & fixing 15mm dia plastic bib cock if required.
60
-
25.5
Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gm.
3
-
98.77
Providing and fixing brass stop cock of approved quality 15mm normal bore.
2
-
256.4
Providing and fixing brass stop cock of approved quality 20mm normal bore .
1
-
276.65
Providing and fixing G.I Socket 15mm to 25mm dia size approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etc.
25
-
26.55
Providing and fixing G.I Socket 40mm to 50mm dia size approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etc.
10
-
79.9
Providing and fixing G.I union 15mm to 25mm dia size approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etc.
12
-
67.2
Providing and fixing G.I union 40mm to 50mm dia size approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etc. Union 40mm to 50mm dia.
5
-
197
Providing and fixing G.I bend 15mm to 25mm dia size approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etc.
10
-
90
Providing and fixing the following size G.I. fitting of approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etcf. Bend 40mm to 50mm dia.
5
-
108
Providing and fixing the following size G.I. fitting of approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etcg. Plug 15mm to 25mm dia.
10
-
6.7
Providing and fixing the following size G.I. fitting of approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etch. Plug 40mm to 50mm dia.
3
-
14.4
Providing and fixing the following size G.I. fitting of approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etci. Nipple 15mm to 25mm dia.
15
-
24.9
Providing and fixing the following size G.I. fitting of approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etcj. Nipple 40mm to 50mm dia.
5
-
66.7
Providing and fixing the following size G.I. fitting of approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etck. Elbow 15mm to 25mm dia.
12
-
29
Providing and fixing the following size G.I. fitting of approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etcl. Elbow 40mm to 50mm dia.
5
-
96.4
Providing and fixing the following size G.I. fitting of approved quality after taking out old & damaged fittings if required including supply of all materials, labour, T&P etcm. Tee 15mm up to 25mm dia.
5
-
40
Making connection of 15mm to 20mm dia from G.I./M.S. pipe and by means of cutting and making hole of required diameter providing ferrule including supply of all labour, material, T&P etc. complete.
5
-
126.5
Providing and fixing white vitreous china water closet of squatting pan (Indian type) Orissa pattern W.C. pan of size 580X440.
3
-
2156.36
Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet : 250X130X30mm
3
-
181.86
Cleaning of drinking water storage tanks of RCC/M.S. of all sizes at various elevations of Buildings including removal of undesirable deposits from the bottom and sides of walls as slush, mud etc using proper cleaning, detergents including supply of all material, T&P etc. required (Contractor will also write the date of cleaning of the outer surface of the tank)
5
-
179.45
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:15 mm dia nominal bore
30
-
206.91
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:20 mm dia nominal bore
15
-
240.51
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:25 mm dia nominal bore
10
-
308.94
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc: 40 mm dia nominal bore
9
-
409.45
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc: 50 mm dia nominal bore
0.5
-
479.03
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.
1
-
2127.5
Providing & fixing c.p. brass waste 32mm for wash basin.
3
-
48
Providing & fixing P.V.C. connection pipe with brass union 15mm nominal bore.
2
-
35.1
Providing & fixing P.V.C waste pipe for sink of wash basin including P.V.C. waste fitting 32mm dia.
4
-
42.15
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3
-
1087.33
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
1
-
1101.48
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
2
-
421.31
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
1
-
574.92
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
1
-
736.61
Providing and fixing 20mm dia 450mm long Aluminium towel of approved quality including all labour, material, T&P etc. required for proper completion of work.
1
-
36.8
Taking out damaged w.c. seal from lavatory at different elevation including clipping the cement concrete on the sides debris in dust bin including all labours, T&P etc. required.
3
-
183.6
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (Handle level) confirming to IS 7231 with all fittings and fixture complete (1041 Ltr. Capacity white)
3
-
709.75
Cleaning of existing overhead tank partly filled with sand/silt etc. after taking shut down including cleaning the walls and base manually, disposal of silt, slush etc. in nearest dust bin or all other low lying as per direction of Engineer-in-charge, including supply of labour materials, T&P required for proper completion of work.
3
-
500
Providing and fixing 500mm W.C. seat of Hindustan/ Parry/ Nicer as approved by Engineer-in-charge including dismantling and removal of damaged w.c. seat including fixing new seat with P-trap properly including cost of all labour, materials, T&P etc.
3
-
534.6
Supply and fixing float-value with complete quality.:15mm dia
3
-
197.9
Cutting damaged P.V.C. pipe for removing leakages including S/T new P.V.C. pipe with socket including cost of all material, labour,T&P etc:15mm dia
5
-
80
Cutting damaged P.V.C. pipe for removing leakages including S/T new P.V.C. pipe with socket including cost of all material, labour,T&P etc: 20mm dia
5
-
100
Opening and cleaning of chocked bid cock and re fixing the same.
5
-
5.77
Removing chocking kitchen trap and bend C.I./A.C. down pipe including all labour, T&P etc.
5
-
5.77
Supply and fixing 50mm dia C.I. door bend
3
-
93.5
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
80
-
97.58
Welding by gas or electric plant including transportation of plant at site etc. complete
300
-
2.84
S/F of 16/26 gaze galonized mosquito proof net over window and ventilator and alos manufacturing and fixing of new bead including cost of all material labour etc
30
-
303.81
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements