Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited - UPRVUNL Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date13 Nov 2024
Closing Date12 Dec 2024
Tender Amount₹ 1,27,56,491
Costs
EMD
₹ 2,55,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RVUNL_973466_1Tender No
02/CCC-I/CCD-II/ CISF/ JTPP/ 2024-25Tender Authority
Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited ViewPurchaser Address
-Website
http://https://uprvunl.org/uprvunl
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
CONSTRUCTION OF CISF QUARTER GUARD AT 2x660 MW JAWAHARPUR THERMAL POWER PROJECT,MALAWAN, DISTT-ETAH
CONSTRUCTION OF CISF QUARTER GUARD AT 2x660 MW JAWAHARPUR THERMAL POWER PROJECT,MALAWAN, DISTT-ETAH
CONSTRUCTION OF CISF QUARTER GUARD AT 2x660 MW JAWAHARPUR THERMAL POWER PROJECT,MALAWAN, DISTT-ETAH
BOQ Items
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.(DSR - 2.27)
46.53
1695
78891.42
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%(DSR - 2.34.1)
173.69
174
30285.17
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos E.C. 20% with 1% concentration (DSR-2.35.3.1)
337.07
197
66439.28
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)(DSR -4.1.8)
106.84
5026
536989.48
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth(DSR -4.17)
66.6
533
35502.69
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.(DSR -26.72)
66.09
649
42950.57
Steel reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete Upto Plinth and above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.(DSR -5.22.6)
35794
72
2594657.55
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level .Concrete of M25 grade with minimum cement content of 330 kg /cum(DSR-5.33.1)
97.22
6942
674966.69
All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum(DSR-5.33.2.1)
182.71
8161
1491120.62
Add for using extra cement in the items of design mix over and above the specified cement content therein.(DSR-5.35)
87.67
584
51243.99
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.(DSR - 5.9.1)
346.86
247
85773.63
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.(DSR - 5.9.2)
-
-
-
Suspended floors, roofs, landings, balconies and access platform.(DSR - 5.9.3)
301.25
601
181248.72
Shelves (Cast in situ)(DSR - 5.9.4)
3.4
601
2045.63
Lintels, beams, plinth beams, girders, bressumers and cantilevers(DSR - 5.9.5)
349.24
479
167373.13
Columns, Pillars, Piers, Abutments, Posts and Struts.(DSR - 5.9.6)
753.79
636
480122.69
Stairs, (excluding landings) except spiral-staircases.(DSR - 5.9.7)
41.16
540
22237.88
Weather shade, Chajjas, corbels etc., including edges(DSR - 5.9.19)
7.88
665
5245.22
Edges of slabs and breaks in floors and walls(DSR - 5.9.16)
-
-
-
Under 20 cm wide(DSR - 5.9.16.1)
151.5
150
22786.06
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)(DSR - 6.1.1)
67.14
5535
371646.47
Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry with 150mm//230mm/300 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).(DSR - 6.47)
169.72
5761
977878.52
Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 100 mm/ 125 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.(DSR - 6.38)
6.17
7142
44068.52
Providing and fixing 18mm thick gang saw cut (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
-
-
-
Granite of any colour and shade(DSR - 8.2.2)
-
-
-
Area of slab over 0.50 Sqm.( For Counter)(DSR - 8.2.2.2)
3.4
3479
11829.11
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning etc. complete. (DSR - 8.4)
8.14
376
3068.65
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/Stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edge etc. complete.(DSR - 8.5)
1
637
637.68
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.(DSR - 9.20)
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws(DSR - 9.20.1)
7.56
2625
19846.31
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR - 10.25.2)
745.43
113
84773.77
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).(DSR-9.23)
7.56
348
2634.4
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineerin-Charge( DSR9.119)
9.75
340
3315.02
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 30 mm thick plain PVC door shutters (DSR9.120.1)
2.84
2103
5974.85
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :( DSR9.96)
-
-
-
300x16 mm( DSR9.96.1)
21
223
4688.02
250x16 mm( DSR9.96.2)
9
201
1810.31
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
250x10 mm( DSR9.97.2)
20.4
89
1833.85
150x10 mm( DSR9.97.4)
13.6
65
885.49
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood'(DSR - 9.1.1)
0.25
113883
28470.89
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.(DSR - 9.84)
3
739
2217.89
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :(DSR - 9.100)
-
-
-
125 mm(DSR - 9.100.1)
18
51
932.11
100 mm(DSR - 9.100.2)
12
45
550.57
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper(DSR - 9.101.01)
15
29
442.09
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. (DSR-9.103)
5
649
3249.62
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (DSR-9.48.1)
189
143
27121.77
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes 4 mm thick glass pane (weight not less than10kg/sqm).(DSR- 9.7.7.1)
11.16
1556
17366.76
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).(DSR-10.28)
1312
499
655427.66
Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineerin- charge.(DSR - 9.145)
165.3
510
84457.76
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces(DSR - 10.5.1)
36
3844
138391.1
Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge.(DSR - 9.146)
45.68
3287
150155.64
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade
of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick(DSR -11.26.1)
217.77
1329
289599.38
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete(DSR -11.27)
37.19
1571
58438.64
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.(DSR - 11.37A)
23.06
805
18575.64
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.( DSR - 8.31)
112.48
894
100605.64
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600x600 mm(DSR-11.41.2)
159.67
1302
207997.03
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm(DSR - 11.48.2)
161.9
209
33935.75
Providing and laying gola 75x75mm in cement concrete M15 grade including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75x75 mm deep chase.(DSR-12.21.1)
137
205
28216.95
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.(DSR-12.21.1)
6
211
1271.2
12 mm cement plaster of mix :(DSR - 13.4)
-
-
-
1:4 (1 cement: 4 coarse sand)(DSR - 13.4.1)
1157.96
239
277601.59
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)(DSR - 13.4.2)
349.58
228
79982.12
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) (DSR - 13.5.2)
492.87
263
130030.86
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)(DSR - 13.16.1)
307.5
197
60690.88
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(DSR -13.80)
514.84
99
51465.9
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.(DSR -13.26)
1465.46
170
250242.84
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade : Two or more coats on new work (DSR -13.82.2)
1465.46
92
135871.56
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (DSR-13.47.1)
1007.71
139
140977.31
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (DSR-13.62.1)
97.21
153
14949.8
French spirit polishing :
Two or more coats on new works including a coat of wood filler(DSR - 13.68.1)
7.56
304
2304.61
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete(DSR-13.80)
1465.46
99
146494.48
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).(DSR-22.3)
23.4
612
14335.71
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of
approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.(DSR - 22.7.1)
355
1214
430996.91
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire (DSR-16.18.1)
3523.06
16
58263.74
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y’ shaped placed 2.4m or 3.00 m apartand with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) (DSR-16.53)
316.2
252
79825.12
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. (DSR-10.31)
156
83
13028.16
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (DSR-17.3.1)
2
5803
11606.86
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe : 40 mm dia(DSR-17.28.2.2)
1
87
87.77
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453x357 mm(DSR-17.32.2)
1
972
972.52
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms(DSR-17.70.1)
3
291
873.12
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms(DSR-17.71)
3
137
412.92
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.(DSR-17.72)
2
198
396.21
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore(DSR-18.49.1)
3
363
1091.11
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore(DSR-18.50.1)
2
537
1074.39
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore(DSR-18.53.1)
2
461
923.69
Providing and fixing toilet paper holder C.P. brass(DSR-17.34.1)
2
506
1013.54
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern(DSR-17.4.1)
3
4325
12975.68
Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern(DSR-17.4.4)
3
12716
38150.28
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth Granite Stone of approved shade(DSR-8.10.2)
2
2792
5585.36
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors(DSR-17.60)
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Sand cast iron S&S as per IS: 3989(DSR-17.60.1.1)
3
1313
3939.26
100 mm inlet and 75 mm outlet
-
-
-
Sand cast iron S&S as per IS - 3989(DSR-17.60.2.1)
2
1371
2742.33
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.(DSR-12.22)
2
211
423.73
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.(DSR-12.44)
2
41
82.04
Providing and fixing soil, waste and vent pipes
-
-
-
100 mm dia(DSR-17.35.1)
-
-
-
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989(DSR-17.35.1.2)
30
948
28445.05
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc.
-
-
-
For 100 mm dia pipe(DSR-17.37.1)
30
249
7486.29
For 75 mm dia pipe(DSR-17.37.2)
8
246
1968.22
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100 mm dia(DSR-17.38.1)
-
-
-
Sand cast iron S&S as per IS - 3989(DSR-17.38.1.2)
2
400
801.54
75 mm dia(DSR-17.38.2)
-
-
-
Sand cast iron S&S as per IS- 3989(DSR-17.38.2.2)
-
-
-
Providing and fixing plain bend of required degree.
-
-
-
100 mm dia(DSR-17.39.1)
-
-
-
Sand cast iron S&S as per IS : 3989(DSR-17.39.1.2)
2
339
678.44
75 mm dia
-
-
-
Sand cast iron S&S as per IS - 3989(DSR-17.39.2.2)
-
-
-
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete
-
-
-
100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 3989(DSR-17.43.1.2)
1
627
627.27
Providing and fixing single equal plain junction of required degree
-
-
-
100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 3989(DSR-17.44.1.2)
1
579
579.65
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete
-
-
-
100 mm
-
-
-
Sand cast iron S&S as per IS - 3989(DSR-17.55.1.2)
2
516
1033.85
75 mm
-
-
-
Sand cast iron S&S as per IS - 3989(DSR-17.55.2.2)
2
386
772.55
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work
-
-
-
100 mm diameter pipe(DSR-17.65.1)
20
55
1114.68
Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead
-
-
-
100 mm diameter pipe(DSR-18.28.1)
10
325
3253.74
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Rectangular type with openable circular lid
-
-
-
150 mm nominal size square 100 mm diameter of the inner hinged round grating(DSR-18.58.2.1)
3
146
440.14
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design
-
-
-
100 mm diameter S.W. pipe(DSR-19.2.1)
5
709
3546.3
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work - Exposed on wall(DSR-18.7)
-
-
-
32 mm nominal outer dia Pipes(DSR-18.7.4)
5
417
2085.89
40 mm nominal outer dia Pipes(DSR-18.7.5)
5
563
2815.34
50 mm nominal outer dia Pipes(DSR-18.7.6)
3
784
2353.06
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes(DSR-12.41)
-
-
-
110 mm diameter(DSR-12.41.2)
40
264
10592.89
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.(DSR-12.43)
-
-
-
110 mm(DSR-12.43.2)
20
250
5014.3
Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design(DSR-17.3)
20
39
781.31
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(DSR-18.7)
-
-
-
15 mm nominal outer dia Pipes(DSR-18.7.1)
15
209
3145.44
20 mm nominal outer dia Pipes(DSR-18.7.2)
10
266
2664.72
25 mm nominal outer dia Pipes(DSR-18.7.3)
10
320
3205.13
32 mm nominal outer dia Pipes(DSR-18.7.4)
5
417
2085.89
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Roof Work(DSR-18.10)
-
-
-
25 mm dia nominal bore(DSR-18.10.3)
20
380
7604.79
32 mm dia nominal bore(DSR-18.10.4)
20
459
9196.94
40 mm dia nominal bore(DSR-18.10.5)
-
-
-
50 mm dia nominal bore(DSR-18.10.6)
-
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :(DSR-18.40)
-
-
-
25 mm diameter pipe(DSR-18.40.3)
2
12
24.57
32 mm diameter pipe(DSR-18.40.4)
2
14
29.6
40 mm diameter pipe(DSR-18.40.5)
2
16
33.68
50 mm diameter pipe(DSR-18.40.6)
2
20
40.54
65 mm diameter pipe(DSR-18.40.7)
2
25
50.26
80 mm diameter pipe(DSR-18.40.8)
2
29
58.34
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) (DSR-18.17)
-
-
-
25 mm nominal bore(DSR-18.17.1)
1
431
431.59
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.(DSR-18.12)
-
-
-
20 mm dia nominal bore(DSR-18.12.2)
2
246
492.75
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)(DSR-18.46)
-
-
-
15 mm nominal bore(DSR-18.46.1)
10
204
2046.61
20 mm nominal bore(DSR-18.46.2)
10
226
2267.11
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design(DSR-18.33)
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5(DSR-18.33.1)
1
8063
8063.51
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete(DSR-18.18)
-
-
-
20 mm nominal bore(DSR-18.18.2)
1
335
335.44
E & M Works
-
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing (DSR E&M -10.18)
20
149
2990.7
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Group A(DSR E&M -1.10.1)
158
622
98346.65
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(DSR E&M -1.11)
2
917
1835.22
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.(DSR E&M -1.31)
24
348
8354.86
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.(DSR E&M -1.32)
24
429
10313.35
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire(DSR E&M -1.14.1)
150
126
19011.98
2 X 4 sq. mm + 1 X 4 sq. mm earth wire(DSR E&M -1.14.3)
50
173
8681.27
4 X 6 sq. mm + 2 X 6 sq. mm earth wire(DSR E&M -1.14.9)
15
342
5130.63
4 X 10 sq. mm + 2 X 6 sq. mm earth wire(DSR E&M -1.14.10)
15
471
7070.9
4 X 16 sq. mm + 2 X 6 sq. mm earth wire(DSR E&M -1.14.11)
20
652
13056.63
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm (For Tel & Alarm)(DSR E&M -1.21.2)
100
78
7813.14
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(DSR E&M -1.25)
20
296
5937.99
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required(DSR E&M -1.26)
10
27
277.8
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required 1 or 2 Module (75mmX75mm)(DSR E&M -1.27.1)
10
210
2109.55
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.(DSR E&M -1.45)
20
176
3524.6
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep(DSR E&M -1.50.1)
2
315
630.26
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.(DSR E&M -1.51)
5
145
729.23
Supply and fixing following way prewired SP&N MCB distribution board of steel sheet for 240voits on surface /recess complete with loose wire box, terminal connectors for all incoming and outgoing circutes ,duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks tinned copper bus bar ,newtral link ,earth bar ,din bar , detachable gland plate , interconnections , powder painted including earthing etc. as required . (DSR E&M -2.7/2014)
-
-
-
2+8 way, Double door(DSR E&M -2.7.5)
1
4264
4264.07
Supply and fixing following way prewired SP&N MCB distribution board of steel sheet for 415voits on surface /recess complete with loose wire box, terminal connectors for all incoming and outgoing circutes ,duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks tinned copper bus bar ,newtral link ,earth bar ,din bar , detachable gland plate , interconnections , powder painted including earthing etc. as required . (But without MCB /RCCB /Isolator)(DSR E&M -2.8/2014)
-
-
-
4 way(4+12), Double door(DSR E&M -2.8.5)
1
10474
10474.37
6 way(4+12), Double door(DSR E&M -2.8.6)
1
13519
13519.73
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
10
172
1727.57
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.(DSR E&M -2.11)
20
6
138.9
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required 25 A(DSR E&M -2.14.1)
2
1672
3345.76
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A(DSR E&M -2.15.2)
1
2279
2279.7
63 A(DSR E&M -2.15.3)
1
2410
2410.79
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(DSR E&M -5.4)
1
5396
5396.28
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)(DSR E&M -5.9)
15
113
1705.87
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.(DSR E&M -5.11)
15
419
6289.58
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.(DSR E&M -1.57)
10
554
5547.33
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required(DSR E&M -2.14)
-
-
-
25A(DSR E&M -2.14.1)
1
1672
1672.88
40A(DSR E&M -2.14.2)
1
1818
1818.73
63A(DSR E&M -2.14.3)
1
2291
2291.86
Design, manufacture, supply , testing and commisioning and installation of club house fabricated out of 16 SWG CRCA sheet steel , IP 42 wall /floor mounting type.The sheet steel shall undergo minimum 9 tank treatment followed by fininshing powder coating of min 60 micron thiclness .The board includes 415 V electrolitic alluminuim bus bar,removable gland plates,cable glands, including connection with outgoing feeders complete in all respect.
1
128712
128712.87
Supply and fixing of 12 Watt to 15 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect. CAT- AAA(PWD1410)
30
1397
41930.54
Supply and fixing of recess/surface mounting round 24 Watt to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set completed in all respects. CAT- AAA(PWD1404)
20
3038
60768.9
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA(PWD1402)
8
1171
9375.77
Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect. CAT-AAA(PWD1417)
2
1215
2430.76
Supply, and installation ,Testing and commissioning of 1200mm sweep, BEE 5 star rated ,ceiling fan with brush less direct current (BLDC) motor, class of insulation ;B,3 nos . Blades, 30 cm long down rod ,2 nos canopies ,shackle kit ,safety rope ,copper winding, power factor not less then 0.9, service value (CMM/W) minimum 6.85,air delivery minimum 215CMM , 350 rpm (tolerance as per IS:374-2019)THD less than 10% remote or electronic regulator unit for speed control and all remaining accesories including safety pin ,nut bolts,washers,temparature rise =75 degree C (max),insulation resistance more than 2 megha ohm,suitable for 230V, 50 Hz,single phase AC supply,earthing etc .Complete as required
20
2333
46670.52
Supplying ,testing ,installation & commissioning of AC 230/250 volts, 50Hz exhaust fan including providing nuts ,bolts mounting frame and other accessories etc .complete(MR)
-
-
-
300mm sweep 900rp(MR)
3
2313
6940.68
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.(DSR E&M -17.1.3)
1
401
401.07
Providind , fixing ,testing and commissioning of electronic hooters with LMT (Hooter shall also be able to work as public addresssystem sounders ) housed in sheet steel /polymer housing suitable for wall /ceilling and surface /recess mounting including making connections with wires complete in all respects and as per specifications.(Make :Agni suraksha (ASES),Ravel , system sensor safeway)(MR)
2
651
1302.19
Providing , fixing testing and commissioning of fire alarm main control and indicating panel, (MR)
1
30384
30384.45
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.(DSR E&M -17.5.2)
75
122
9180.44
Providing and fixing of self illuminated /uato glow "EXIT" signs printed on photoluminescent sheet containing self illuminated base chemical , of appropriate size nat less than 300x150mm ,suspended from ceiling or fixed to the wall with accessories as required and as directed at site .(Make : Glow lite /Legrand /Autoglow /Pierlite/Agni Suraksha-ASES/ Ravel /Honeywell)(MR)
2
759
1519.22
Providing ,storing ,handling ,shifting installation , testing and commissioning of portable fire Extinguishers as described below: 4.5kg carbon dioxide extinguisher, IS marked , with high pressure discharge tube , horn control valve , CCE approved cylinder (MR)
2
3906
7813.14
6 kg Mono Ammonium Phosphate (ABC) type cartridge operated extinguishers(MR)
2
6076
12153.78
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%