Uttar Pradesh Projects Corporation Limited Tender

... More
The UPPCL has issued a formal invitation for competitive bids for the Uttar Pradesh Projects Corporation Limited project, for Upgradation And Centrilzation Of 11kv And 33/11 Kv Substation Distribution Overhead Electric Line in Jhansi, Uttar Pradesh, with an estimated contract value of Rs. 10,31,69,000. The bid opening date for this tender is 27-05-2025 and the last date for bid submission is 13-06-2025. Interested bidders for Uttar Pradesh Projects Corporation Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Uttar Pradesh Projects Corporation Limited - UPPCL Tender

Works
Energy, Oil and Gas
Electrical and Electronics
Electrical Works
Eprocure
Opening Date27 May 2025
Closing Soon13 Jun 2025
Tender Amount₹ 10,31,69,000 
Notes
Download

AI Insights

Bid Capacity
... View More
The formula for bidding capacity is: Bidding Capacity = {[AxNx2.5]-B} Where, A = Maximum turnover in construction works executed in any one year during the last seven years taking into account the completed as well as works in progress. N = Number of years prescribed for completion of work for which bids has been invited. B = Value of existing commitments and ongoing works to be completed during the period of completion of work for which bids have been invited.
Technical Capacity
... View More
The bidder should have prior work experience in similar class of works. The experience of similar class of works completed in the last seven years is considered. For certain types of work, such as D- Metallic Roofing work and E-Water proofing work, the bidder should have: - Three similar works each costing not less than 40% of the cost of this job in tender, - Two similar works each costing not less than 50% of the cost of this job in tender, - One similar work costing not less than 80% of the cost of this job in tender. In general, the bidder should have completed similar work(s) with a value of not less than 40% of the tendered cost. The similar work should be with some Central/State Government Department or reputed private entities. The bidder should also have an average annual financial turnover (gross) of minimum 30% of the tendered cost in Civil/Electrical construction work during the last available three-year consecutive balance sheets. Additionally, the bidder should have completed works of similar nature during the last seven years ending the previous day of the last date of submission of tender, with details to be provided in Form C. The value of executed works shall be brought to the current cost level by enhancing the actual value of work at a specified rate. The bidding capacity of the contractor should be equal to or more than the estimated cost of the work put to tender, calculated using the formula: Bidding Capacity = {[AxNx2.5]-B}, where A is the maximum turnover in construction works executed in any one year, N is the number of years prescribed for completion of work, and B is the value of existing commitments and ongoing works. The bidder should have a solvency of 40% of the tendered cost certified by their Bankers.

Costs

Summary

Upgradation And Centrilzation Of 11kv And 33/11 Kv Substation Distribution Overhead Electric Line

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
11KV HT Panel at New 11kV Substation Supply, Installation Testing & Commissioning of 11kV HT Panel consisting of 2 Incomers + 1 Bus Coupler +8 Outgoing as per specification. a) 2 No. Incoming 630A TP, 18.4kA Electrically Operated VCB along with suitable CT, PT, Neumeric type O/C & E/F Protection, Metering along with Ammeter & Voltmeter Meter, 300-150/5A CT with all fuses wiring etc. b) 1 No. Bus coupler 630ATP 18.4kA VCB c) 4 No. Outgoing 630A TP, 18.4kA VCB for Transformers along with suitable CT. Neumeric type O/C & E/F Protection, Standby E/F Protection, Metering along with Ammeter with all fuses wiring etc. d) 2No. Power Pack with suitable Battery Backup along with required wiring connections etc.

1

9162085

-

... More
HT CABLE Supply, delivery, laying testing & commissioning of 11KV (E), XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semin conducting compound followed by copper tape, cores laid up, taped PVC inner sheath single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes. It should be operational at 11 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand alround and protected with bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/l. Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers The installation should be complete in all respects and as per requirement of the job. 11kV, 3C X 300 sq. mm. ST CABLE

7300

4953

-

... More
11kV Cable Termination Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11KV grade as required 300 sqmm

26

30258

-

... More
Cable jointing of 11 KV grade XLPE insulated armoured cable with suitable cable termination using RAYCHEM/Birla 3M/MECP KITS including all accessories i.e. Sockets, lugs, gland etc as required without cable box. 3C x 300 Sqmm 11KV Indoor

24

11736

-

... More
3C x 300 Sqmm 11KV Outdoor

12

16464

-

... More
EARTHING: Earthing System:Supply and burring of safe Earthing Electrode T-39 cu copper coated length up to 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm terminal dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs sctivated soil (BFC) capble of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonry housing (from electrode terminal to switch board, cost of 25x3 copper strip will be extra) make As approved in UPPWD & CPRI certified.

24

18525

-

... More
Supply and burring of Safe Earthing Electrode T-39 Zn- Zinc Coated, Length 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25 x 3 G.l. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

16

13822

-

... More
Supply & Laying of 50 x6 mm copper strip from earth Electrode directly in round as required complete in all resect.

200

2897

-

... More
Supply & Laying of 32 x6 mm G.l. Strip from earth Electrode directly in round as required complete in all resect.

300

142

-

... More
SUB STATION SAFETY EQUIPMENT : Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality

40

2422

-

... More
Supply and fixing of fire bucket, round bottom made of Gel. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as er directions of Enineer-in-Chare.

12

465

-

... More
Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.

2

289

-

... More
Supply and fixing of fire extinguisher, ABC Type 9.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

6

10307

-

... More
Supply and fixing of C02 type fire extinguisher 6.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

6

18525

-

... More
DISTRIBUTION BOARDS Supplying and fix\ng following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, temina connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar neutral link, earth bar, din bar, detachable gland plate interconnections, powder painted including earthing etc of DB's (FOR LIGHTING & SMALL POWER) Note- Each incoming and outgoing MCB's shall have Ics = 10 kA minimum 12 Way TPN DB Incoming 1 No. 63A 4P MCB 3 Nos. 40A DP ELCB in each incomer (100 mA

2

35880

-

... More
POWER SOCKETS Supply, Installation, testing and commissioning of OF POWER SOCKETS,SWITCH COMPLETE WITH ACCESSORIES LIKE GI BOXES,SHEET STEEL ENCLOSURE ETC. AS REQUIRED. 2 Nos. 6/16 Amps 5 pin socket controlled by separate 16 Amps modular type switch for each socket housed in GI box of suitable size (UPS socket for computer)

2

486

-

... More
6/16 Amps 6 pin socket controlled by 16 Amps modular type switch housed in GI box of suitable size

33

565

-

... More
Flame proof/Retardent type 6/16 Amps 6 pin socke controlled by 16 Amps modular type switch housed in GI box of suitable size. (M.R.(MDS-LEGRAND)M.R.

3

1293

-

... More
Supplying and fixing 2O amps, 240 volts, SPN industrial type,soc1et outlet, with 2 pole and earth metal enclosed plug top alongwith 20 amps “C‘ curve SP, MCB, in sheet steel encIosure,on surface or in recess, with chained metal cover for the socket out ie and complete with connections, testing and commissioning etc. as required.

5

1170

-

... More
63 A TP metaJ clad industnal socket controlled by 63 A TP MCB housed in sheet steel enclosures

2

6063

-

... More
L/GHTING FIXTURES Supply, Installation, testing and commissioning of lighting fixtures shall indude the supporting stee structures, clamps/connectors and all other accessories required for proper fixing of the lighting fittings. 2x28W Surface mounted fixtures complete with choke starter, T5 lamps etc.(Wipro catalogue no.WIF 20228/equivalent) (A R)

48

1814

-

... More
2x2B/36W surface mounted flame proof type fixtures complete with choke, starter, TS lamps etc. (cromptom Greaves EXTL 240/ equivalent) A.R.

2

22903

-

... More
2x18W surface type compact fluorescent fixtures complete with choke, starter, tube etc.(Wipro catalogue no.WV9 45218/equivalent) (A.R)

4

1750

-

... More
2x28W recessed mounted fixtures complete with choke, starter, Ts lamps etc.

10

3785

-

... More
2x28W outdoor type wall mounted fixtures complete with all accessories as required.(Philips HGS-120 or Equivalent) (A.R)

5

2910

-

... More
25OW Metal halide flood light including 1 X 250W Metal halide lamp, control gear box etc. complete with all accessories.(Wipro- WFZ 4225O or Equivalent) (A.R)

2

8664

-

... More
CEILING / WALL BRACKETS/ EXHAUST FANS Supply, installation, testing and commissioning of 1200 mm dia sweep ceiling fan with standard down rod (AR)

9

1772

-

... More
Supply, Installation, testing and commissioning of Oscillating type wall fan 400mm dia. (A.R)

2

2039

-

... More
Supply, Installation, testing and commissioning of 300mm dia heavy duty 900 RPM exhaust fan complete with lowered shutters. (A.R)

10

2395

-

... More
Co-ordination & Engineering Preparation of Drawing & Approval from Electrical Safety, Inspection of Electrical Inspector

1

166250

-

... More
Provision of Temporary Supply Arrangement during Dismantling of Old Equipment’s & till commissioning of New Equipment with all required Material cable T&P etc.

1

332500

-

... More
SITC of 11 kv Outdoor type RUM (CC+V) Supply, installation, testing and commissioning of 1 1k V Outdoor type Ring Mains Unit consisting of 2 Nos. 11kV Isolator & I No, 1 1k V VCB with required Transformer Protection. Complete in all Respect.

6

983250

-

... More
Fencing of Transformer & RMU Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at I to 1.25 mts and horizontal members spaced at I mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion of work

650

1211

-

... More
Construction WORK Providing and fixing RMU with supply of all works, labour, T&Petc.

8

23750

-

... More
Design, manufacture, supply, installation, testing and commissioning of 11kV/0.433kV, 400KVA Transformer 3 phase, 50 Hz delta/star connected, outdoor, oil filled, ONAN type transformer, complete with all fittings such as marshalling Box thermometers (OTI), WTI, Buchholz relay, Off Load Tapp Changer with + 5 % to —12.5%, tapping at the step of 1.25% bi-directional roller, diagrams & rating plate & Winding temperature indicator, oil temperature indicator, lifting lugs, H. T. cable box/ LT Cable Box suitable for Termination o Cable. transformer shall confirm to Latest IS : 1180 Energy Efficiency Level-III. The Job Includes Shifting of Transformer up to the Installation Place, and Installation of same on Plinth including fixing of all parts of Transformer ie Conservator Tank, Bucholz Relay, Silica Gel Breather, HT Cable Box, LT Cable Box etc. The Job also includes the filling of Transformer Oil after Proper Oil Filtration and checking of BDV.

2

1543750

-

... More
Supply and Laying of Aluminium Conductor PVC insulated armoured served sheathed cables 1100V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top as directed by Engineer in Charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 Sq mm 3-1/2 Core

2900

693

-

... More
150 Sq mm 3-1/2 Core

1100

1252

-

... More
300 Sq mm 3-1/2 Core

1400

2205

-

... More
400 Sq mm 3-1/2 Core

1800

2718

-

... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming 800 Amp /415Volt ACB-1 No Outgoing: 630 Amp,ACB-1 No,100 Amp MCCB-2 Nos. 63 Amp MCCB-3 No

1

1209540

-

... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming 200 Amp. MCCB-01 No

18

216600

-

... More
Incoming 300 Amp. MCCB-01 No Outgoing 100 Amp. MCCB-4 No

8

262333

-

... More
SITC of 33kV HT Outgoing VCB Extension Panel at 33kV Substation Supply, installation, testing and commissioning of 33kV Outgoing VCB Panel to be installed at 33kV Substation, The Panel shall be with required VCB, CT, PT Protection Relays, Mtering etc. complete in all respect and shall be fitted with 33kV Existing Panel for which suitable Adapter Box shall be provided (if reqd.) for matching of Bus Bar with Existing Panel.

1

1933250

-

... More
SITC Of 5000 KVA 33 kV/11 kv Transformer at 33 Kv Substation Design, manufacture, supply, installation, testing and commissioning of 33kV/11kV, 5000KVA Transformer 3 phase, 50 Hz delta/star connected, outdoor, oil filled, ONAN type transformer, complete with all fittings such as marhslling Box thermometers (OTI), WTI, Buchholz relay, Off Load Tapp Changer with 5% to-12.5%, tapping at the step of 1.25% bi- directional roller, diagrams & rating plate & Winding temperature indicator, oil temperature indicator, lifting lugs, H. T. cable box/ LT Cable Box suitable for Termination of Cable. transformner shall confirm to Latest IS: 1180 Energy Efficiensy Level-ll. The Job Includes teh Shifting of Transformer up to the Installation Place, and Installation of same on Plingth including fixing of all parts of Transformer ie Finges Conservator Tank, Bucholz Relay, Silica Gel Breather, HT Cable Box, LT Cable Box etc. The Job also includes the filling of Transformer Oil after Proper Oil Filtration and checking of BDV to meet the result as 60KV

1

8423175

-

... More
Foundation of above as per UPPL Specification and Angle Plateform

1

131100

-

... More
HT Cable Supply, delivery, laying testing & commissioning of 33KV (E), XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semin conducting compound followed by copper tape, cores laid up, taped PVC inner sheath single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes. It should be operational at 33 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand alround and protected with bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/l. Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers The installation should be complete in all respects and as per requirement of the job. (CCI (Bombay/Nashik), Fort Gloster (Calcutta /Baripara), Asian (Thane / Silvasha), Universal (Satna) Nicco (Calcutta), ICL (Rajpura), Diamond, Grandlay ,Havells make 33kV, 3C X 120 sq. mm.CABLE

600

4470

-

... More
33kV Cable Termination Cable jointing of 33 KV grade XLPE insulated armoured cable with suitable cable termination using RAYCHEM/Birla 3M/MECP KITS including all accessories i.e. Sockets, lugs, gland etc as required without cable box. 3C x 120 Sqmm , 33KV ( Indoor type )

10

21673

-

... More
Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 33KV grade as required 120 SQMM

4

50291

-

... More
EARTHING: Earthing System:Supply and burring of safe Earthing Electrode T-39 cu copper coated length up to 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm terminal dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs sctivated soil (BFC) capble of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonry housing (from electrode terminal to switch board, cost of 25x3 copper strip will be extra) make As approved in UPPWD & CPRI certified.

24

18525

-

... More
Earth Strip Supply & Laying of 50 x6 mm copper strip from earth Electrode directly in round as required complete in all resect.

205

2897

-

... More
SUB STATION SAFETY EQUIPMENT : Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality

40

2422

-

... More
Supply and fixing of fire bucket, round bottom made of Gel. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as er directions of Enineer-in-Chare.

12

465

-

... More
Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.

2

289

-

... More
Supply and fixing of fire extinguisher, ABC Type 9.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

5

10307

-

... More
Supply and fixing of C02 type fire extinguisher 6.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

5

18525

-

... More
DISTRIBUTION BOARDS Supplying and fix\ng following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, temina connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar neutral link, earth bar, din bar, detachable gland plate interconnections, powder painted including earthing etc of DB's (FOR LIGHTING & SMALL POWER) Note- Each incoming and outgoing MCB's shall have Ics = 10 kA minimum 12 Way TPN DB Incoming 1 No. 63A 4P MCB 3 Nos. 40A DP ELCB in each incomer (100 mA

2

35880

-

... More
POWER SOCKETS 2 Nos. 6/16 Amps 5 pin socket controlled by separate 16 Amps modular type switch for each socket housed in GI box of suitable size (UPS socket for computer)

2

486

-

... More
6/16 Amps 6 pin socket controlled by 16 Amps modular type switch housed in GI box of suitable size

33

565

-

... More
Flame proof/Retardent type 6/16 Amps 6 pin socke controlled by 16 Amps modular type switch housed in GI box of suitable size. (M.R.(MDS-LEGRAND)M.R.

3

1293

-

... More
Supplying and fixing 2O amps, 240 volts, SPN industrial type,soc1et outlet, with 2 pole and earth metal enclosed plug top alongwith 20 amps “C‘ curve SP, MCB, in sheet steel encIosure,on surface or in recess, with chained metal cover for the socket out ie and complete with connections, testing and commissioning etc. as required.

5

1170

-

... More
63 A TP metaJ clad industnal socket controlled by 63 A TP MCB housed in sheet steel enclosures

2

6063

-

... More
L/GHTING FIXTURES Supply, Installation, testing and commissioning of lighting fixtures shall indude the supporting stee structures, clamps/connectors and all other accessories required for proper fixing of the lighting fittings. 2x28W Surface mounted fixtures complete with choke starter, T5 lamps etc.(Wipro catalogue no.WIF 20228/equivalent) (A R)

48

1814

-

... More
Zx2B/36W surface mounted flame proof type fixtures complete with choke, starter, TS lamp etc.

2

22903

-

... More
2x18W surface type compact fluorescent fixtures complete with choke, starter, tube etc.(Wipro catalogue no.WV9 45218/equivalent) (A.R)

4

1750

-

... More
2x28W recessed mounted fixtures complete with choke, starter, TS lamps etc.

10

3785

-

... More
2x28W outdoor type wall mounted fixtures complete with all accessories as required.(Philips HGS-120 or Equivalent) (A.R)

5

2910

-

... More
25OW Metal halide flood light including 1 X 250W Metal halide lamp, control gear box etc. complete with all accessories.(Wipro- WFZ 4225O or Equivalent) (A.R)

2

8664

-

... More
CEILING / WALL BRACKETS/ EXHAUST FANS Supply & installation testing and commissioning 1200mm dia sweep ceiling fan with standered down rod

9

1772

-

... More
Supply, Installation, testing and commissioning o Oscillating type wall fan 400mm dia. (A.R)

2

2039

-

... More
Supply, Installation, testing and commissioning ot 300mm dia heavy duty 900 RPM exhaust fan complete with lowered shutters. (A.R)

10

2395

-

... More
Co-ordination & Engineering Preparation of Drawing & Approval from Electrical Safety, Inspection of Electrical Inspector

1

166250

-

... More
S/L of HDPE Pi e & HDD Work Supply of HDPE Pi e 160mm Dia PN6 Grade 9.5MM thick

560

617

-

... More
Laying of HDPE Pipe 2/3 Mtr Below Ground with Drilling Machine. Complete in all respect

485

636

-

... More
Fencing of Transformer & RMU Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at I to 1.25 mts and horizontal members spaced at I mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion of work

181

1211

-

... More
Construction WORK Providing and fixing RMU with supply of , labour, T&P Material etc.

1

23750

-

... More
33KVA SUBSTATION JHANSI

-

-

-

... More
Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.

102.2

180

-

... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.

28.6

4712

-

... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.

28.6

1469

-

... More
Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)

183

214

-

... More
Providing and laying in position specified grade of reinfoced cement concrete. Excluding the cost of centering, shuttering, finishing and reinforcement- all work up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) RCC work in plinth sand.

10.4

6257

-

... More
RCC work with cement approved coarse sand and 2cm guage approved stone grit in the proportion of 1:1.5:3 in slab of excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc. required for proper completion of the works. including cost of binding wire. the rate excludes making of drip course which shall be paid extra.

29

7958

-

... More
RCC work with cement approved coarse sand and 2cm guage approved stone grit in the proportion of 1:1.5:3 in Beam excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc. required for proper completion of the works. including cost of binding wire. the rate excludes making of drip course which shall be paid extra.

13.9

7958

-

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) : ..RCC work in column

0.5

6257

-

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). RCC work in column

6.9

7507

-

... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Footing excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.

16.7

6257

-

... More
Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.

23.4

4933

-

... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).

15.8

284

-

... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

15.8

101

-

... More
Brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.5 brick thick. (1:6 cement & coarse sand)

67.8

6298

-

... More
Half brick masonry with (Class M-150 First Class Brick) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

12.2

777

-

... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

81.3

7460

-

... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:3 (1 cement: 3 coarse sand)

25.7

284

-

... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand

321.6

273

-

... More
12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand.

397.1

237

-

... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

102.3

54

-

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

197.2

125

-

... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

126.4

119

-

... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

427.5

119

-

... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface)

321.6

128

-

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

397.1

156

-

... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal ceiiling)

163.1

128

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

881.8

107

-

... More
Providing and laying cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

22.9

1165

-

... More
Painting or Vanishing two coat on iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior ready mixed paint of clear synthetic varnish including supply of all materials, labour, T & P etc. required for proper completion the work. Paint to be used should confirm to the I.S.I. No. 103 1950.

57.5

156

-

... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate

141.4

424

-

... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 11.6.1 18 mm thick

8.4

458

-

... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigment

7.5

730

-

... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

15.3

7913

-

... More
Supply & fixing of flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (a) 35mm thick (a) Single leaf

8.9

1655

-

... More
(b) Extra for double leaf doors

2.5

1728

-

... More
both side laminated

11.5

661

-

... More
Extra for providing lipping with 2nd class eak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

11.5

319

-

... More
Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc.

87.5

769

-

... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes

4.2

961

-

... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

6

475

-

... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 250 mm x 10mm

12

285

-

... More
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm

12

190

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete.

35.4

271

-

... More
Columns,Pillars, Piers, Abutments, Posts and Struts.

84.3

665

-

... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.

229.5

509

-

... More
Suspended floors, roofs, landings, balconies and access platform.

195.2

641

-

... More
INTERNAL ELECTRICAL WORKS

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C

25

1043

-

... More
Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed midium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

25

619

-

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular type switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

2

1128

-

... More
Wiring for light/ Power plug with 2X4 sq. mm FRLS PVC insuleted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

185

241

-

... More
Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2X1.5 sqmm + 1x1.5 sqmm earth wire 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire

20

198

-

... More
2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire

50

317

-

... More
2 x 10 sq.mm. + 1 x 6 sq.mm. earth wire

10

411

-

... More
4 x 6 sq.mm. + 2 x 6 sq.mm. earth wire

10

544

-

... More
4 x 10 sq.mm. + 2 x 6 sq.mm. earth wire

100

725

-

... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

10

266

-

... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

2

28

-

... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 amps switch

2

74

-

... More
2 Way 5/6 amps switch

1

106

-

... More
15/16 amp switch

8

112

-

... More
3 pin 5/6 amp socket outlet

2

88

-

... More
6 pin 15/16 amp socket outlet

8

142

-

... More
Telephone socket outlet

1

106

-

... More
TV antenna socket outlet

1

106

-

... More
DATA outlet

1

584

-

... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

1

525

-

... More
Supplying, drawing, connecting and testing of 0.5 mm dia annealed copper conductor PVC insulated PVC sheathed telephone wire in existing conduit/wire way duct etc. as required of following sizes: 2 Pair (4 core) 2 Pair

50

27

-

... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 2 run of cable

50

69

-

... More
Installation, testing and commissioning of ceiling fan,including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

10

244

-

... More
Installation of exhaust fan in the existing opening , including making good the damage, connection, testing commissioning etc. as required. (a): Up to 450mm sweep

3

325

-

... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

3

149

-

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

50

104

-

... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

50

34

-

... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan

7

3087

-

... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

17

86

-

... More
Supply of recess/Surface mounting round 6-8 watt, cut out Min 125mm, Height Min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set, suitable for 24Hr continuous Operation,complete in all respec. Make: Philips or Equivalent in approved make

5

1187

-

... More
Supply of LED Tube Light 20 watt Polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects. Make: Philips or Equivalent in approved make

10

807

-

... More
Supply of 7W Bulkhead light fixture with specification complete as per architectural design Make: Philips or Equivalent in approved make

2

617

-

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way Double door (4 + 18)

2

3592

-

... More
Supplying and fixing of following ways surface/ recess mounting,vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way Double door (4 + 12)

1

5425

-

... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. For 6 way, Double door TPN MCBDB

2

811

-

... More
Supplying and fixing Cable End Box (Loose wire box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.

1

845

-

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

18

184

-

... More
Supplying and fixing 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A 4P

4

3382

-

... More
Supplying and fixing 415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCCB 25KA complete with connections, testing and commissioning etc. as required. 63A 4P

1

9770

-

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

18

9

-

... More
Suplly and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I. all respects.

2

6251

-

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

60

50

-

... More
Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required. 4C x 16 sqmm aluminium conductor, 2XWY.

80

221

-

... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

80

32

-

... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 4 X 16 sq. mm (28mm)

2

223

-

... More
Supply, Installation, Testing and Commissioning of 250mm size PVC exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x1.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge.

3

3148

-

... More
S/f of 10 pair Telephone tag block for floors and building with krone connectors with connection and punching of same.

1

4275

-

... More
INTERNAL W/S & SANITATION WORKS

-

-

-

... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid 10 litre low level white vitreous china flushing cistern & CP flush bend with fittings & CI brackets, 40mm flush bend, overflow arrangement with specials of standeard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cotting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid

3

5538

-

... More
White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

3

2739

-

... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore

3

58

-

... More
45 cm length 15 mm nominal bore

3

67

-

... More
Providing and fixing CP brass 32mm/40mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

3

715

-

... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

3

116

-

... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

3

350

-

... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore

3

463

-

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

6

397

-

... More
Providing and fixing CP hand spray with lever control (health faucet) and flexible hose 1m long connection with CP holder for hand spay complete in all respects.

2

1220

-

... More
RAIN WATER DRAINAGE WORK Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm

25

261

-

... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Coupler 110 mm

2

94

-

... More
Bend 87.5 degree 110 mm Bend

3

104

-

... More
Shoe (Plain) 110 mm Shoe

2

91

-

... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

3

37

-

... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.

2

206

-

... More
Providing and fixing MS holder bat clamps of approved design to CI or SCI rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix and cost of cutting holes and making good the walls etc. 110mm dia pipe.

10

251

-

... More
UPVC SWR SOIL, WASTE & VENT PIPES AND FITTINGS Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes. Internal Toilet (Soil, Waste & Rain Water Pipe) 110 mm dia.

35

679

-

... More
Providing and fixing SWR PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110mm x 110mmX110mm

3

1159

-

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Bend without door (87.5°) 110mm

4

247

-

... More
Bend without door (45°) 110mm

1

209

-

... More
Y' Fitting without door 110mm

4

394

-

... More
Single Tee without door 110 mm

1

346

-

... More
Coupler 110mm

2

209

-

... More
Vent Cowl 110mm

4

166

-

... More
For Wash basin & Urinal 40mm dia. Pipe (for wash basin & sunken toilet spout)

8

242

-

... More
Elbow (90°) 40mm

3

52

-

... More
Elbow (45°) 40mm

2

42

-

... More
T fitting 40mm

3

66

-

... More
Coupler 40mm

2

38

-

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm dia nominal bore

20

344

-

... More
20 mm dia nominal bore

15

371

-

... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall / Terrace 20 mm dia nominal bore

15

302

-

... More
25 mm dia nominal bore

10

381

-

... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 20 mm dia nominal bore

15

16

-

... More
25 mm dia nominal bore

10

20

-

... More
Providing and fixing of Gun matel gate valve with wheel of approved quality 20mm dia nominal bore

4

373

-

... More
25mm dia nominal bore

3

430

-

... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20mm dia nominal bore

1

319

-

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Domestic Tank

1000

7

-

... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.

20

243

-

... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia. RCC Pipes

20

514

-

... More
150 mm. dia. RCC Pipes

20

384

-

... More
Providing & fixing square mouth SW gully trap SP 1 complete with CI grating brick masonry chamber with water tight CI cover with frame of 300x300 mm size150 x 100 mm size P type With common burnt clay FPS (non modular) bricks of class designation 7.5

2

1891

-

... More
Providing, laying and joiting glazed stonewre pipes class Sp-1 with stiff mixture of cement mortar in the proportion of 1:1 including testing of joints etc. complete. 100 mm diameter

2

306

-

... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. With common burnt clay FPS (non modular) bricks of class designation 7.5

3

8833

-

... More
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.

2

383

-

... More
Excavating trenches of required width for pipe, cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and than returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excabated soil as directed, within a lead of 50 m (External water supply) All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.

30

149

-

... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore

30

255

-

... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :- 20 mm dia nominal bore

30

10

-

... More
Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in external work. 20 mm dia nominal bore

30

108

-

... More
Providing & fixing gate valve. 20 mm dia nominal bore

1

373

-

... More
Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed. 4.5kg capacity cylinder.

2

4447

-

... More
ABC type extinguisher with cylinder fully charged with 6 Kg. capacity.

2

1745

-

... More
11KVA SUBSTATION JHANSI

-

-

-

... More
Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.

102.3

180

-

... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.

28.5

4712

-

... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.

28.5

1469

-

... More
Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)

183

214

-

... More
Providing and laying in position specified grade of reinfoced cement concrete. Excluding the cost of centering, shuttering, finishing and reinforcement- all work up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) RCC work in plinth sand.

12.1

6257

-

... More
RCC work with cement approved coarse sand and 2cm guage approved stone grit in the proportion of 1:1.5:3 in slab of excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc. required for proper completion of the works. including cost of binding wire. the rate excludes making of drip course which shall be paid extra.

29

7958

-

... More
RCC work with cement approved coarse sand and 2cm guage approved stone grit in the proportion of 1:1.5:3 in Beam excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc. required for proper completion of the works. including cost of binding wire. the rate excludes making of drip course which shall be paid extra.

13.8

7958

-

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) : ..RCC work in column

0.5

6257

-

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). RCC work in column

6.9

7507

-

... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in Footing excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.

16.7

6257

-

... More
Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.

23.5

4933

-

... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).

15.9

284

-

... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

15.9

101

-

... More
Brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.5 brick thick. (1:6 cement & coarse sand)

68.1

6298

-

... More
Half brick masonry with (Class M-150 First Class Brick) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

5.8

777

-

... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

83.9

7460

-

... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:3 (1 cement: 3 coarse sand)

25.7

284

-

... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand

323.5

273

-

... More
12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand.

397.1

237

-

... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

102.3

54

-

... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

165.3

125

-

... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

97.2

119

-

... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

408

119

-

... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface)

323.5

128

-

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

397.1

156

-

... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal ceiiling)

175.8

128

-

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

896.3

107

-

... More
Providing and laying cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

22.9

1165

-

... More
Painting or Vanishing two coat on iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior ready mixed paint of clear synthetic varnish including supply of all materials, labour, T & P etc. required for proper completion the work. Paint to be used should confirm to the I.S.I. No. 103 1950.

52.1

156

-

... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate

145

424

-

... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 11.6.1 18 mm thick

8.4

458

-

... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigment

7.5

730

-

... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

15.3

7913

-

... More
Supply & fixing of flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (a) 35mm thick (a) Single leaf

7.4

1655

-

... More
(b) Extra for double leaf doors

2.5

1728

-

... More
both side laminated

9.9

661

-

... More
Extra for providing lipping with 2nd class eak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

9.9

319

-

... More
Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc.

71.3

769

-

... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes

5.4

961

-

... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

5

475

-

... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete(a) 250 mm x 10mm

10

285

-

... More
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm

10

190

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete.

35.4

271

-

... More
Columns,Pillars, Piers, Abutments, Posts and Struts.

84.3

665

-

... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.

211

509

-

... More
Suspended floors, roofs, landings, balconies and access platform.

195.2

641

-

... More
INTERNAL ELECTRICAL WORKS

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C

25

1043

-

... More
Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed midium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

25

619

-

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular type switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

2

1128

-

... More
Wiring for light/ Power plug with 2X4 sq. mm FRLS PVC insuleted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

185

241

-

... More
Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2X1.5 sqmm + 1x1.5 sqmm earth wire 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire

20

198

-

... More
2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire

50

317

-

... More
2 x 10 sq.mm. + 1 x 6 sq.mm. earth wire

10

411

-

... More
4 x 6 sq.mm. + 2 x 6 sq.mm. earth wire

10

544

-

... More
4 x 10 sq.mm. + 2 x 6 sq.mm. earth wire

100

725

-

... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

10

266

-

... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

2

28

-

... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 amps switch

2

74

-

... More
2 Way 5/6 amps switch

1

106

-

... More
15/16 amp switch

8

112

-

... More
3 pin 5/6 amp socket outlet

2

88

-

... More
6 pin 15/16 amp socket outlet

8

142

-

... More
Telephone socket outlet

1

106

-

... More
TV antenna socket outlet

1

106

-

... More
DATA outlet

1

584

-

... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

1

525

-

... More
Supplying, drawing, connecting and testing of 0.5 mm dia annealed copper conductor PVC insulated PVC sheathed telephone wire in existing conduit/wire way duct etc. as required of following sizes: 2 Pair (4 core) 2 Pair

50

27

-

... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 2 run of cable

50

69

-

... More
Installation, testing and commissioning of ceiling fan,including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

10

244

-

... More
Installation of exhaust fan in the existing opening , including making good the damage, connection, testing commissioning etc. as required. (a): Up to 450mm sweep

3

325

-

... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

3

149

-

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

50

104

-

... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

50

34

-

... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan

7

3087

-

... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

17

86

-

... More
Supply of recess/Surface mounting round 6-8 watt, cut out Min 125mm, Height Min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set, suitable for 24Hr continuous Operation,complete in all respec. Make: Philips or Equivalent in approved make

5

1187

-

... More
Supply of LED Tube Light 20 watt Polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects. Make: Philips or Equivalent in approved make

10

807

-

... More
Supply of 7W Bulkhead light fixture with specification complete as per architectural design Make: Philips or Equivalent in approved make

2

617

-

... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way Double door (4 + 18)

2

3592

-

... More
Supplying and fixing of following ways surface/ recess mounting,vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way Double door (4 + 12)

1

5425

-

... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. For 6 way, Double door TPN MCBDB

2

811

-

... More
Supplying and fixing Cable End Box (Loose wire box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.

1

845

-

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

18

184

-

... More
Supplying and fixing 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A 4P

4

3382

-

... More
Supplying and fixing 415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCCB 25KA complete with connections, testing and commissioning etc. as required. 63A 4P

1

9770

-

... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

18

9

-

... More
Suplly and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I. all respects.

2

6251

-

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

60

50

-

... More
Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required. 4C x 16 sqmm aluminium conductor, 2XWY.

80

221

-

... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

80

32

-

... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 4 X 16 sq. mm (28mm)

2

223

-

... More
Supply, Installation, Testing and Commissioning of 250mm size PVC exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x1.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge.

3

3148

-

... More
S/f of 10 pair Telephone tag block for floors and building with krone connectors with connection and punching of same.

1

4275

-

... More
INTERNAL W/S & SANITATION WORKS

-

-

-

... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid 10 litre low level white vitreous china flushing cistern & CP flush bend with fittings & CI brackets, 40mm flush bend, overflow arrangement with specials of standeard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cotting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid

2

5538

-

... More
White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

2

2739

-

... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore

2

58

-

... More
45 cm length 15 mm nominal bore

2

67

-

... More
Providing and fixing CP brass 32mm/40mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

2

715

-

... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

2

116

-

... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

2

350

-

... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore

2

463

-

... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

4

397

-

... More
Providing and fixing CP hand spray with lever control (health faucet) and flexible hose 1m long connection with CP holder for hand spay complete in all respects.

2

1220

-

... More
RAIN WATER DRAINAGE WORK Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm

25

261

-

... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Coupler 110 mm

2

94

-

... More
Bend 87.5 degree 110 mm Bend

3

104

-

... More
Shoe (Plain) 110 mm Shoe

2

91

-

... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

3

37

-

... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.

2

206

-

... More
Providing and fixing MS holder bat clamps of approved design to CI or SCI rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix and cost of cutting holes and making good the walls etc. 110mm dia pipe.

10

251

-

... More
UPVC SWR SOIL, WASTE & VENT PIPES AND FITTINGS Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes. Internal Toilet (Soil, Waste & Rain Water Pipe) 110 mm dia.

35

679

-

... More
Providing and fixing SWR PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110mm x 110mmX110mm

3

1159

-

... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Bend without door (87.5°) 110mm

4

247

-

... More
Bend without door (45°) 110mm

1

209

-

... More
Y' Fitting without door 110mm

4

394

-

... More
Single Tee without door 110 mm

1

346

-

... More
Coupler 110mm

2

209

-

... More
Vent Cowl 110mm

4

166

-

... More
For Wash basin & Urinal 40mm dia. Pipe (for wash basin & sunken toilet spout)

8

242

-

... More
Elbow (90°) 40mm

3

52

-

... More
Elbow (45°) 40mm

2

42

-

... More
T fitting 40mm

3

66

-

... More
Coupler 40mm

2

38

-

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm dia nominal bore

15

344

-

... More
20 mm dia nominal bore

10

371

-

... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall / Terrace 20 mm dia nominal bore

15

302

-

... More
25 mm dia nominal bore

10

381

-

... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 20 mm dia nominal bore

15

16

-

... More
25 mm dia nominal bore

10

20

-

... More
Providing and fixing of Gun matel gate valve with wheel of approved quality 20mm dia nominal bore

4

373

-

... More
25mm dia nominal bore

3

430

-

... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20mm dia nominal bore

1

319

-

... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Domestic Tank

1000

7

-

... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.

20

243

-

... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia. RCC Pipes

20

514

-

... More
150 mm. dia. RCC Pipes

20

384

-

... More
Providing & fixing square mouth SW gully trap SP 1 complete with CI grating brick masonry chamber with water tight CI cover with frame of 300x300 mm size150 x 100 mm size P type With common burnt clay FPS (non modular) bricks of class designation 7.5

2

1891

-

... More
Providing, laying and joiting glazed stonewre pipes class Sp-1 with stiff mixture of cement mortar in the proportion of 1:1 including testing of joints etc. complete. 100 mm diameter

2

306

-

... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. With common burnt clay FPS (non modular) bricks of class designation 7.5

3

8833

-

... More
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.

2

383

-

... More
Excavating trenches of required width for pipe, cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and than returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excabated soil as directed, within a lead of 50 m (External water supply) All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.

30

149

-

... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore

30

255

-

... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :- 20 mm dia nominal bore

30

10

-

... More
Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in external work. 20 mm dia nominal bore

30

108

-

... More
Providing & fixing gate valve. 20 mm dia nominal bore

1

373

-

... More
(FIRE EXTINGUISHERS) Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed. 4.5kg capacity cylinder.

2

4447

-

... More
ABC type extinguisher with cylinder fully charged with 6 Kg. capacity.

2

1745

-

... More
C.C. ROAD

-

-

-

... More
Earth work in foundations in ordinary soil(loan clay or sand) including lift upto 1.5 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30m from the foundation trenches. (where machine can not move).

65.1

180

-

... More
Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone ballest 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.

42.4

4712

-

... More
First class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc.

13.3

4933

-

... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). [DSR-16.75]

33.8

6795

-

... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. DSR- 16.46.1 Using grade 'A' sealing compound.

112.5

6

-

... More
GST Extra as per applicable

-

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.