Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date3 Jan 2025
Closing Date9 Jan 2025
Tender Amount₹ 2,40,85,000
Costs
EMD
₹ 4,82,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPPRC_989502_1Tender No
46/UPPCL/GM-1/2024-25/E-TENDER Dated-28.12.2024Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift
191.41
484
92747.72
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
95.91
1469
140896.59
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) ,including cost of form- work,in foundation and floors.
111.62
4712
525956.79
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or chordancewill be used The rate of application of chemical emulsion shallbe as follows :
-
-
-
... More
(1)Treatment for masonary & foundation 5 liters per/100 sqm.(2) Back fill in immediate contact with foundation 7.5 liters/100sqm (3) Treatment of top surface of plinth filling 5 liters/100 sqm (4)Treatment junction of wall and the floor 7.5 liters /100 sqm (5)Treatment of soil along external perimeter of building 7.5liters/100sqm. (6) Treatment of soil under apron along external perimter 5 liters/100 sqm.
709.03
218
154923.06
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
(a) Suspended floors, roofs, landings, balconies and access platform
1569.73
641
1006824.82
... More
(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers
885.07
509
450845.81
... More
(c) Foundations, footings, bases of columns, etc. for mass concrete
29.07
271
7885.53
... More
(d) Columns, Pillars, Piers, Abutments, Posts and Struts
155.49
664
103393.08
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). [FOR LINTEL]
-
-
-
... More
Ground Floor
23.34
7958
185754.42
... More
First Floor
6.77
7958
53879.93
... More
Mumty
1.16
7958
9232.01
... More
As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete)
-
-
-
... More
Ground Floor
104.37
7958
830642.21
... More
First Floor
71.71
7958
570713.36
... More
Mumty
3.6
7958
28651.07
... More
As in item 6 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)
-
-
-
... More
Ground Floor
18.39
7958
146359.21
... More
First Floor
14.21
7958
113092.13
... More
Mumty
0.6
7958
4775.18
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) All work up to plinth level :
32.68
6257
204484.32
... More
As in item 6 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20.
-
-
-
... More
Ground Floor
14.12
7958
112375.86
... More
First Floor
4.54
7958
36132.18
... More
Mumty
0.46
7958
3660.97
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in .foundation and plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand)
197.58
4933
974770.81
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
83.61
101
8452.97
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
-
-
-
... More
Ground Floor
179.67
6298
1131707.19
... More
First Floor
117.29
6298
738787.42
... More
Mumty
19.13
6298
120496.24
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
-
-
-
... More
Ground Floor
31.07
6463
200827.47
... More
First Floor
37.34
6463
241354.93
... More
Mumty
20.01
6463
129338.84
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
-
-
-
... More
Ground Floor
265.66
7460
1981890.02
... More
First Floor
140.11
7460
1045255.63
... More
Mumty
8.43
7460
62889.91
... More
15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) [Plinth Plaster]
123.87
284
35280.65
... More
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)
-
-
-
... More
Ground Floor
1715.73
273
469200.68
... More
First Floor
1048.21
273
286653.99
... More
Mumty
99.77
273
27284.1
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
-
-
-
... More
Ground Floor
549.65
237
130657.3
... More
First Floor
671.76
237
159684.07
... More
Mumty
432.51
237
102811.95
... More
Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of ppropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge
959.42
69
66766.04
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. [IN FLOORING]
-
-
-
... More
Ground Floor
406.67
1074
436991.32
... More
First Floor
276.01
1074
296589.31
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. [IN SKIRTING]
-
-
-
... More
Ground Floor
63.14
1310
82715.29
... More
First Floor
37.71
1310
49402.36
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm
14.12
1013
14307.37
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,
epoxy touch ups, including rubbing, curing, moulding and polishing to edgesto give high gloss finish etc. complete at all levels.
-
-
-
... More
Ground Floor
171.02
3552
607616.96
... More
First Floor
115.78
3552
411354.76
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment,
epoxy touch ups, including rubbing, curing, moulding and polishing to edgesto give high gloss finish etc. complete at all levels.
-
-
-
... More
Ground Floor
37.64
3552
133731.16
... More
First Floor
26.66
3552
94720.31
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing he joints with white cement and matching pigment etc., complete
82.82
758
62819.8
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete.
363.66
877
318955.28
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
374.09
424
158935.88
... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws
-
-
-
... More
(a) 35mm thick Single leaf
31.08
1655
51438.95
... More
(b) Double leaf-Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
78.33
1728
135421.6
... More
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
44.1
3017
133062.93
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady] the frame.
138.6
394
54738.68
... More
M.S WORK IN DOOR WINDOW
-
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding
4054.58
151
614512.14
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (a) 35mm thick Second class teak wood.
183.02
3417
625426.93
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (a) Sal Wood.
7.53
80599
606917.4
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading
183.02
649
118902.6
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compund) content less than 50 grams/ litre of approved brand & manufacture, including applying addotional coats whereever required to achieve even shade & colour. Two coats, with water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. (For Internal wall surface)
-
-
-
... More
Ground Floor
1629.45
149
244303.44
... More
First Floor
1048.21
149
157158.13
... More
Mumty
99.77
149
14958.52
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
-
-
-
... More
Ground Floor
549.65
118
65051.08
... More
First Floor
671.76
118
79502.8
... More
Mumty
432.51
118
51187.56
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compund) content less than 50 grams/ litre of approved brand & manufacture, including applying addotional coats whereever required to achieve even shade & colour. Two coats, with water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. (For Ceiling)
-
-
-
... More
Ground Floor
748.94
149
112288.57
... More
First Floor
498.99
149
74813.57
... More
Mumty
34.69
149
5201.07
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
-
... More
Ground Floor
549.65
107
59329.22
... More
First Floor
671.76
107
72509.77
... More
Mumty
432.51
107
46685.13
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
78
187
14646.06
... More
Providing & fixing S.S. sliding door bolts ISI marked anodised or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
78
332
25898.34
... More
Providing and fixing bright finished S.S. towerbolts (barrel type) with necessary
screws etc. complete
-
-
-
... More
(a) 250 mm x 10mm
78
145
11330.28
... More
Providing & fixing bright/ matt finished stainless steel handles of approved quality & make with screws and 125mm long.SI marked
156
82
12862.2
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
672.69
1165
783872.2
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
341.56
118
40331.4
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
109.41
121
13339.27
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (weights not less than 10 kg/ sqm).
183.02
736
134821.68
... More
Construction of drain along with apron.
132.64
609
80854.69
... More
Supplying and stacking at site.Over burnt (Jhama) brick aggregate 90 mm to 45 mm [FOR SUNKEN AREA]
18.38
603
11087.18
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
49.01
426
20918.94
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
281.13
1448
407152.15
... More
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
5
3767
18838.9
... More
Providing and fixing 150 mm S.C.I. tee at the inlet and outlet of septic tank.
1
5844
5844.36
... More
Providing & fixing 75mm dia vent pipes.
1
8203
8203.85
... More
Providing & fixing of 75mm dia cast iron terminal guard.
1
2799
2799.75
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
... More
M.D. -10- Circular shape 500mm internal diameter
1
8111
8111.16
... More
L.D. -2.5- Circular shape 450mm internal diameter
1
8090
8090.75
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5
1
18581
18581.03
... More
ELECTRICAL
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C (Light Point)
220
1059
233112
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C (Fan Point)
66
1059
69933.6
... More
Wiring point for exhaust fan with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
10
1059
10596
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch socket, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Plug and conduit)
65
402
26165.75
... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated, copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire.
112
241
27020
... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated, copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire
200
317
63418
... More
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated, copper conductor single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.
198
198
39328.74
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
135
176
23792.4
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required.
255
30
7736.7
... More
Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V, 10kA, "C" curve, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole
-
-
-
... More
6 - 32 amps.Cat. A
59
432
25526.35
... More
Supply and fixing of 40 Amp. 4 Pole MCB (10KA)
-
-
-
... More
CAT A
12
1908
22899.6
... More
Supply and fixing of 63 Amp. 4 Pole MCB (10KA)
-
-
-
... More
CAT A
14
1966
27525.12
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . 4 way (4 + 12), Double door
2
5425
10851.74
... More
Supply and fixing of single pole MCB blanking plate
-
-
-
... More
CAT A
16
184
2958.56
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
66
244
16160.76
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning
etc. as required. Upto 450 mm sweep
10
325
3250.3
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required..
66
266
17590.98
... More
Supplying and making end termination with brass compression
gland and aluminium lugs for following size of PVC insulated
and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV
grade as required.
-
-
-
... More
50 sqmm 3.5 core
15
298
4474.65
... More
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire
-
-
-
... More
50 sqmm 3.5 core
6
298
1789.86
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
100 mm Dia
12
366
4394.88
... More
Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.
14
323
4522
... More
Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required.
8
959
7676
... More
Supply & fixing hexagonal/Round G.P. Fan box of approved make made up of 1.0 mm thick ISI marked G.P. Sheet spot welded four to Eight holes of 25.4mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screwed fitted with 300mm round zink coated M.S. Bar x 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material labour, T & P etc required for proper completion of the work.
66
166
10972.5
... More
Supply & fixing ofrecess/Surface/Pendent mounting round 12 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects.
-
-
-
... More
Cat. AA
3
1567
4702.5
... More
Supply of Ceiling Fan with motor of A.C. Permanent insulation capacitor rating confirming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated volage 220/240 volts, 50 Hz, 1-ph A.C.the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system.
-
-
-
... More
BEE 5 Star rated-1200mm sweep
66
2137
141075
... More
Supply and burying of 40mm dia x 4.5 metres long G.I. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.6 to 8SWG G.I.wire in G.I. pipe upto appron (and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I.box with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
2
5396
10792
... More
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.
-
-
-
... More
50 Sq.mm
16
61
988
... More
Supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.2mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and
-
-
-
... More
adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.
-
-
-
... More
All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.
-
-
-
... More
The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
-
-
-
... More
The minimum clearances between bus bars shall be as follows :
-
-
-
... More
Phase to phase - minimum 20mm
-
-
-
... More
Phase to neutral-minimum 15mm
-
-
-
... More
L.T.PANEL
-
-
-
... More
Incoming :
-
-
-
... More
One (1) No 200 A 4 pole
-
-
-
... More
Metering :
-
-
-
... More
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
-
-
-
... More
One (1) No. (0-200A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
-
-
-
... More
One (1) Set of Phase Indication Lamp.
-
-
-
... More
Bus Bar :
-
-
-
... More
One (1) No.200 A, TPN aluminimum bus bar of suitable length.
-
-
-
... More
Outgoing :
-
-
-
... More
Phase indication lamps on each outgoing to be provided.
-
-
-
... More
100Amps TPN - 1No.
-
-
-
... More
63Amps TPN - 3Nos
-
-
-
... More
OR outgoing as per site requirment
1
167105
167105
... More
Supply & fixing of 7/9 W LED BULB complete in all respect. Make:C&S Electric or Eq
32
245
7843.2
... More
Supply and Fixing of LED Tube Light with batten suitable for up to 1X20/22 watt LED tube light fitting complete including tube on surface complete in all respect. Make:C&S Electric or Eq
92
361
33299.4
... More
Supply & erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required-Make: USHA Cat No. TURBO JET DLX
-
-
-
... More
300mm sweep.
5
2137
10687.5
... More
SANITARY.
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
-
-
-
... More
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
13
4681
60855.34
... More
Same as above but for European type W.C. pan with white plastic seat and lid
3
4506
13520.88
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require
-
-
-
... More
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.
16
1299
20798.24
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required
-
-
-
... More
Kitchen sink without drain board of size 610x510x200mm
3
3417
10253.01
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
... More
Semi rigid pipe
-
-
-
... More
a) 32mm dia
12
71
862.44
... More
b) 40mm dia
3
80
242.16
... More
Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge.
-
-
-
... More
15mm nominal bore
3
241
724.56
... More
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.
14
490
6865.6
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.
-
-
-
... More
a) 110mm diameter
100
261
26106
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
-
-
-
... More
a) 110mm
15
206
3094.65
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
a) 110mm
40
256
10272
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
15
37
567.6
... More
Providing & fixing 32 # G.I. Pipes spout including cutting & making good the walls etc.
10
461
4613.8
... More
Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before but excluding supply and cost of other fIttlings such as elbow,bend,tee and y-tee including supply of al marerial labour and T&P.Required for proper completion of work.
-
-
-
... More
110 mm O.D.
110
701
77121
... More
90 mm O.D.
115
650
74836.25
... More
Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.
28
1187
33250
... More
Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735.
-
-
-
... More
Size 90 mm
20
394
7885
... More
Size 110 mm
16
304
4864
... More
Supply and fixing of UPVC S.W.R. plain tee confirming to IS-14735.
-
-
-
... More
Size 90x90x90 mm
12
356
4275
... More
Size 110x110x110 mm
10
375
3752.5
... More
Supply and fixing of UPVC S.W.R. Cowel confirming to IS-14735.
-
-
-
... More
Size 75/90 mm
4
90
361
... More
Size 110 mm
4
87
349.6
... More
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.
-
-
-
... More
32mm dia nominal bore
40
633
25346
... More
Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality.
-
-
-
... More
32mm dia nominal bore.
45
21
949.05
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Exposed on wall
-
-
-
... More
20mm dia nominal outer dia pipes
30
318
9547.5
... More
25mm dia nominal outer dia pipes
40
381
15258.8
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Concealed work including cutting chases and making good the walls etc.
-
-
-
... More
15mm dia nominal outer dia pipes
85
472
40197.35
... More
20mm dia nominal outer dia pipes
60
510
30643.2
... More
25mm dia nominal outer dia pipes
25
595
14897.25
... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
-
-
-
... More
a) 15mm nominal bore
16
481
7703.36
... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
... More
a) 15mm nominal bore
17
759
12903
... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
-
-
-
... More
a) 15mm nominal bore
35
545
19095.65
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
... More
20 mm dia nominal bore
4
512
2051.8
... More
25mm dia nominal bore
5
591
2956.4
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
6000
10
62700
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
... More
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
... More
Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
120
243
29230.8
... More
Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
... More
100mm diameter
50
306
15342.5
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
... More
100mm diameter S.W. Pipe
50
667
33367
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.
-
-
-
... More
150mm diameter
50
384
19245.5
... More
250mm diameter
50
687
34389
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design
-
-
-
... More
150 mm. dia. RCC Pipes
50
514
25701
... More
250 mm. dia. RCC Pipes
50
703
35170.5
... More
Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design
-
-
-
... More
150 x 100 mm. size P type
-
-
-
... More
With Sewer bricks conforming to IS : 4885
5
1875
9378.75
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design
-
-
-
... More
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
-
-
-
... More
(i) For Sewer Line
5
8833
44168.5
... More
Extra for depth of man hole size 90x80 cm
1
4104
4104.74
... More
EXT. PLUMBERING
-
-
-
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
... More
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
... More
Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
10
243
2435.9
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.
-
-
-
... More
250mm diameter
10
687
6877.8
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design
-
-
-
... More
250 mm. dia. RCC Pipes
10
652
6529.2
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design
-
-
-
... More
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
-
-
-
... More
With FPS bricks of class designation 75
-
-
-
... More
(i) For Sewer Line
1
8833
8833.7
... More
Extra for depth of man hole size 90x80 cm
0.15
6104
915.71
... More
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.
2
383
766.02
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
... More
For pipes 100 to 250mm diameter
1
560
560.61
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
... More
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
... More
Pipes, cables etc. not exceeding 80mm dia.
90
243
21923.1
... More
Provding and fixing gun metal non return valve of approved quality (screwed end)
-
-
-
... More
65 mm nominal bore
-
-
-
... More
a) Horizontal
2
1585
3170.24
... More
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work)
-
-
-
... More
65mm nominal bore.
55
620
34111
... More
50mm nominal bore.
40
527
21088
... More
32mm nominal bore.
25
373
9343.5
... More
Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work.
-
-
-
... More
65mm diameter pipe
55
189
10403.25
... More
50 mm diameter pipe
40
119
4793.6
... More
32 mm diameter pipe
25
114
2851.75
... More
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.
-
-
-
... More
65 mm nominal bore
1
1205
1205.09
... More
50 mm nominal bore
1
710
710.16
... More
32 mm nominal bore
2
477
954.02
... More
Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for stop cock, with C.I. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With F.P.S. bricks
6
1378
8269.98
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
25 to 40 mm dia nominal bore
3
630
1892.34
... More
50 to 80 mm dia nominal bore
3
1234
3704.91
... More
FIRE ALARM.
-
-
-
... More
Supplying Installation testing & Commissioing of Butterfly Value PN-16 slim seal standard lever operated type as per design standard IS:1395 or BS:5155 with required flanges,nut,bolts etc. Complete in all respects.
-
-
-
... More
150 mm
2
6471
12943.5
... More
100 mm
2
4815
9631.06
... More
80 mm
2
3598
7196.94
... More
Supplying Installation Commissioning of dual plate Non Return Value of following sizes PN-10 as per design standard IS:5312 or BS:1868 with companion flanges, nut, bolts etc. Complete in all respect.
-
-
-
... More
150 mm
1
12846
12846.71
... More
100 mm
2
7981
15962.68
... More
Supplying Installation testing & Commissioning of Manual Swing type Fire Hose Reel IS:444 complete with heavy duty reel, 19 mm dia 30 Mtr. Long. 2 ply polyster yarn braided rubber pressure hose, Red colored, SS jet nozzle 25 mm isolating value and all other necessary fixing accessories complete in all respect.
2
8720
17440.5
... More
Supplying Installation testing & Commissioning of 25 mm Air Release valve gunmental having rubber ball and with 25 mm BSP threaded male inlet including necessary accessories and connections complete in all respect.
1
3372
3372.5
... More
Supplying Installation Commissioning of 25 mm Ball valve PN-1 gunmental as per IS:778 including necessary accessories and connections.
2
1745
3490.12
... More
Providing / Fixing of Fire Hose cabinet box made out of 18 gauge MS sheet including two coats of post office red paint over one coat of primer with 4 mm, thick glass door in front painted "FIRE" in red luminous paint. The size of the box should be 750 mm X 600 mm X 250 mm size capable of accommodating a pair of hose with coupling and nozzle. The box should be floor mounted type with railway coach lock arrangement and lever for opening the door after breaking the glass complete.
2
9025
18050
... More
Supplying fixing of Fire hose, RRL hose jacketed with circular woven synthetic fibre conforming to IS:636.88 63 mm dia X15 Mtr. Long with S.S. heavy duty, 63 mm, Painr of male and female instantaneous couling having IS: 903 mark and duly S.S. wire wounded.
2
3212
6425.52
... More
Supplying fixing of S.S. Branch pipe, short type with 63 mm male instantaneous intel, male threaded outlet, fitted with 15 mm bore nozzle having IS:903 mark. Gun Metal
2
1745
3490.12
... More
Providing / Fixing of Fire Fighting pump set suitable for automatic operation consisting of the following as per the specification. a) Horizontally mounted, centrifugal type single/multi stage fire pump having cast iron body, bronze impeller, stainless steel shaft and capable of delivering 450 LPM, 7.5 H.P against a total head of 52 mtrs. Complete with pressure gauge & gun metal cocks on delivery side including bypass arrangement. Terrace pump
1
62263
62263.88
... More
Supplying Installation testing & Commissioning of vertical air vessel fabricated from 6 mm thick MS plate with dished ends 250 mm dia DN 1.2 m high common for fire and jockey pump complete with spring loaded safety valve.
-
-
-
... More
Test pressure 12 kv/Sq.mm)
1
13177
13177.53
... More
Supplying Installation Commissioning of pressure Gauge ranging from 0 to 14 kg. per sq.mm ISI marked from approved manufactures complete in all respect.
2
1852
3705
... More
Supplying fixing of Cast iron body 63 mm dia male instantaneous intel coupling with housing cabinet (500X400X400 for 2 way and 600X400 for 4 way) cap and chain for fire brigade correction conforming to IS:904 and making connection with fire fighting pipe or underground water tank completing the work in all respect as per the directions of the Engineer-in-charge. (FIRE BRIGADE CONNECTION)
-
-
-
... More
Four way connection (4 way)
1
10093
10093.33
... More
Providing/Fixing of cubical type floor mounted Fire pump control panel fabricated from 16 G M.S. sheet duly powder coated finish of approved shade and comprising of: a) One 63 amp. TP-NL M.C.C.B. with rotary handle of beacking capacity 35 KV. b) One Volt meter (0-500 V) with selector swich. c) One set including lamps.
1
40375
40375
... More
Supplying and laying of Insulated PVC sheathed, Steel Aromed, Copper Aluminium Conductor, 1100V grade Powder Cable. The cable shall be laid in tray / in trenches/on wall/ floor etc. As required (Approx quantities only)
-
-
-
... More
2 crore x 1.5 sq.mm Cu Cable
25
273
6837.5
... More
3.5 crore X 25 sq.mm AL Cable
15
354
5315.25
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
... More
150 sq. mm 3-1/2 core
12
909
10909.8
... More
50 sq. mm 3-1/2 core
10
467
4674
... More
35 sq. mm 3-1/2 core
10
400
4009
... More
10 sq. mm 4 core
12
310
3727.8
... More
Supplying and fixing of Self Glow Exit signage for stairs and exists Complete in allrespects
2
1092
2185
... More
Fire man axe
6
1852
11115
... More
Pressure Switch
2
1116
2233.34
... More
Supply & fixing of Single way landing/Hydrant / Yard Hydrant valve 63 mm dia.gun metal instantanuous with female coupling with chain etc. complete.
2
5522
11045.32
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 70 m Head.
1
92006
92006.36
... More
Supplying Installation Commissioning Intelligent Addressable 2 loop fire alarm control panel is able to connect 250 devices (Detector or Module) per loop in any combination with 20% spare address for detector in each loop should have min. 854 char LCD multi-line QVGA LCD display complete with inbuilt additional seven customized pregrammable function switch for direct activation of any device or control along with three programmable LED's indication along with 9A power supply inbuilt min three Notification appliance circuit with sufficient power supply to drive sounder cum strobe unit along with inbuilt 50 AH UL listed battery charger along with required SMF batteries for 24 hours in normal condition.
1
172790
172790.7
... More
Supplying Installation testing & Commissioning Intelligent Addressable photoele smoke detector with base as per specification with true alarm photo0 sensing technology selectable sensitivity from 0.2% to 3.7% / Ft, obscuration support digital communication and magnetically operated functional test.
12
2064
24771.84
... More
Supplying Installation testing & Commissioning Intelligent Addressable type heat Dectector along with base as per specification rate of rise temperature range is at 8.3 dgree c/ 11.1 dgree c per min and fixed temperature sensing is independent of rate of rise sensing to operate at 57.2 dgree c/68 dgree c support digital communication and magnetically operated functional test.
12
1968
23627.64
... More
Supplying Installation testing & Commissioning of Remote red LED alarm indicator on single gauge stainless steel plate.
12
199
2392.2
... More
Supplying Installation testing & Commissioning of Intelligent Addressable Manual Call points-double action Break Glass cum pull station suitable for wall/column mounting.
2
294
589.4
... More
Supplying Installation testing & Commissioning of Intelligent Addressable Hooter cum multi carriar strobe, Unit as per specifications and customization of intensity selection as 15, 30, 75 or 110 cd of strobe unit is possible by panel. Sounder sum strobe will be driven by supervised 24 V DC input and will give 70 db output at 3 m strobe unite will be synchronized 1 Hz strobe flash rate for better evacuation in complete facility.
2
279
559.64
... More
Supplying Installation testing & Commissioning Intelligent Addressable single Addressable Control Relay Module-Form "C" contact type.
2
2169
4338.1
... More
Supply laying testing & Commissioning of 2 corex 1.5 sr.mm single standard copper conductor, PVX insulated armoured cable.
35
259
9075.5
... More
CO2 type extinguisher 4.5 kg.
2
11257
22515
... More
ABC Type extinguisher 4 kg.
2
7695
15390
... More
BORING.
-
-
-
... More
External W/S arrangements with T.W. boring of 150 mm dia with 110 mm dia P.V.C. pipe assembly, 2.00 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangements etc .
-
-
-
... More
Drilling charges for 6" dia tubewell for stone area.
130
656
85302.1
... More
6" PVC casing pipe of ISI mark.
45
635
28578.6
... More
P/ F 2" GI pipe (B) class. (DSR 18.10.6)
90
475
42750
... More
Nylon mesh for filter.
1
380
380
... More
Plastic dori.
1
95
95
... More
Solvent cement.
1
190
190
... More
6" End cap.
1
190
190
... More
6" Submersible cap.
1
185
185.25
... More
2" MS clamp (Heavy).
1
665
665
... More
2" GI elbow.
1
104
104.5
... More
2": X 6" GI nipple.
1
133
133
... More
2 HP 9 Stage submersible pump of ISI mark with automatic pane or required at site.
1
23750
23750
... More
2.5 sqm. Submersible cable.
90
128
11542.5
... More
Pea Gravel.
1
2755
2755
... More
2" MS socket.
4
261
1045
... More
Cartage of material upto site.
1
855
855
... More
Supply and laying unde ground G.I. pipe 80 mm dia from pump to pvc tank (DSR18.12.8)
53
632
33515.61
... More
SITE DEVELOPMENT.
-
-
-
... More
Providing and laying 80mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
10
672
6723.5
... More
P/Laying granuler sub-base in interlocking complete.
1
1925
1925.75
... More
P/Laying interlocking work including gsb, filling local sand and toe wall complerte as per direction by in engineer.
340
1261
428865.8
... More
P/making surface drain including all work as per direction by in emgineer.
10
1106
11062.2
... More
GST Extra as applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements