Uttar Pradesh Projects Corporation Limited Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date28 May 2025
Closing Date11 Jun 2025
Tender Amount₹ 4,66,05,000
Technical
Technical
Financial
Bid Capacity
... View More
The formula for bidding capacity is: Bidding Capacity = {[AxNx2.5]-B} Where, A = Maximum turnover in construction works executed in any one year during the last seven years taking into account the completed as well as works in progress. N = Number of years prescribed for completion of work for which bids have been invited. B = Value of existing commitments and ongoing works to be completed during the period of completion of work for which bids have been invited.
Technical Capacity
... View More
The required prior work experience for the bidder is related to works of similar nature completed during the last seven years. The bidder should have experience of similar class of works completed, and in case the work involves two or more basements, the bidder should have executed one similar work with a minimum of one basement under one Agreement. The values and percentages of similar works completed are: - 40% of the cost of this job in tender (for three similar works)
- 50% of the cost of this job in tender (for two similar works)
- 80% of the cost of this job in tender (for one similar work) For specialized works, the criteria are as follows:
- Pile work: three similar works each costing not less than 40% of the cost of this job in tender, two similar works each costing not less than 50% of the cost of this job in tender, or one similar work costing not less than 80% of the cost of this job in tender.
- Aluminum work: three similar works each costing not less than 40% of the cost of this job in tender, two similar works each costing not less than 50% of the cost of this job in tender, or one similar work costing not less than 80% of the cost of this job in tender.
- Steel Structure Work (MS truss work): three similar works each costing not less than a certain percentage (not specified) of the cost of this job in tender. The bidder should have satisfactorily executed works as per the following criteria during the last seven years:
- For Pile work, Aluminum work, Steel Structure Work, Metallic Roofing work, and Water proofing work, the bidder should have completed three similar works each costing not less than 40% of the cost of this job in tender, two similar works each costing not less than 50% of the cost of this job in tender, or one similar work costing not less than 80% of the cost of this job in tender. The bidder should have had an average annual financial turn over (gross) of a minimum of 30% of the tendered cost in Civil/Electrical construction work during the last available three-year consecutive balance sheets. For technical competence, the bidder should have completed similar works such as more than fifteen storey buildings, minimum one building of Ten storeys, or completing balance construction work of one building (including structural work) minimum up to ten storeys. Each basement, stilt constructed in the building shall be considered as a storey. The bidder should provide details of all works of a similar nature completed during the last seven years, including the cost of work, date of commencement, stipulated date of completion, and actual date of completion. The bidder should also provide a performance report of works, including the quality of work, financial soundness, technical proficiency, resourcefulness, and general behavior.
Costs
EMD
₹ 9,32,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Summary
Renovation Of Basement Rooms And Establishment Of Advanced Storage System At Rajaya Sangrahalaya Building Lucknow District-lucknow (u.p.)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPPRC_1043636_1Tender No
22/UPPCL/GM-7/E-TENDER/2025-26 Dated-27.05.2025Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying 6 to 8 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size with all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
1306.23
1165
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 25 mm thick
514.61
1462
-
... More
Supply and fixing 6 mm China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm).
119.79
822
-
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand
620.77
296
-
... More
12mm thick plaster in 1:3 on ceiling and soffits of stairs upto floor two level.
275.96
225
-
... More
Godrej catus touch plus black digital smart lock for wooden door with 4 in 1 access fingerprint, rfid, pin, mechanical key & 3 lock dead bolt
10
80750
-
... More
Godrej catus touch plus black digital smart lock for wooden door with 4 in 1 access fingerprint, rfid, pin, mechanical key & 3 lock dead bolt
35
61750
-
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.
-
-
-
... More
Fabrication of hold fast for door, chaukhats and windows.
270
72
-
... More
Providing & fixing of door / windows grill.
1572.08
164
-
... More
Z-Section steel windows with Openable panels, excluding Glass panes.
1024.65
98
-
... More
Fixing of Door, windows / ventilators chaukhats in position.
-
-
-
... More
(a) Door chaukhats
45
104
-
... More
(b) Window chaukhats
25
80
-
... More
(c) Ventilator chaukhats
15
57
-
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
56.93
798
-
... More
Providing and fixing Stainless steel sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete. (a) 250mm x 16mm.
45
247
-
... More
Providing and fixing Stainless steeltower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
-
-
-
... More
300 x 10mm
45
123
-
... More
200 x 10mm
25
94
-
... More
Providing and fixing Stainless steelhandles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (a) 125 mm.
70
62
-
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 12 mm mild steel U beading
65.03
704
-
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
56.93
798
-
... More
Steel Painting:Applying priming coat:(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works.(b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
220.58
169
-
... More
Steel Painting:Applying priming coat:(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works.(b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
256.2
169
-
... More
One priming coat of cement primer and Two coat oil distemper on new work including supply of all materials labour and tools and plants etc required for proper completion of the work
4322.82
139
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
4322.82
117
-
... More
Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in- charge with in a distance of 60 mts.(200 ft)
4322.82
18
-
... More
Dismantiling Door & window ,chowkhats with hold fast & including stacking of dismantled materials as directed by the engineer-in-charge with in a distance of 60 m (200ft)
132
275
-
... More
Providing and applying integral crystalline slurry of hydrophilic in
nature for waterproofing treatment to the RCC structures like retainingwalls of the basement, water tanks, roof slabs, podiums, reservior,sewage & water treatment plant, unnels / subway and bridge decketc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystallineslurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integralcrystalline slurry : 1 part water) for horizontal surfaces and applyingthe same from negative (internal) side with the help of synthetic fiberbrush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than90% compared with control concrete as per DIN 1048 and resistantto 16 bar hydrostatic pressure on negative side. The crystalline slurryshall be capable of self-healing of cracks up to a width of 0.50mm.The work shall be carried out all complete as per specification andthe direction of the engineer-in-charge. The product performance shallcarry guarantee for 10 years against any leakage
-
-
-
... More
For vertical surface two coats @ 0.70 kg per sqm
850
354
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the1200x600 mm panel to form grids of 60x600 mm and
-
-
-
... More
wall angle ofsize 24x24x0.3 mm and laying false ceiling tiles of approved texturein the grid including, required cutting/making, opening for serviceslike diffusers, grills, light fittings, fixtures, smoke detectors etc. Main"T" runners to be suspended from ceiling using GI slotted cleats ofsize 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of allT-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed byEngineer-in-charge
-
-
-
... More
12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 m,mad eof Gypsum plaster board,manufactured from natural gypsum as per IS 2095 part Iand laminated with white 0.16mm thick fire retardant
PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed
239.28
1662
-
... More
Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including utting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all mplete as per direction of Engineer-in-Charge.12mm thickness
314.24
4370
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc.
51.84
3763
-
... More
METAL SECURITY DOOR
6
266000
-
... More
Strengthening work in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
20.7
8144
-
... More
P/F Fe-500 Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
8.12
8093
-
... More
Dismantling of existing plaster including disposal of refuse as directed by the engineer in charge
896.73
41
-
... More
Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet).
2104.82
55
-
... More
Disposal of Malba upto 8 Km
70.56
198
-
... More
ELECTRIFICATION WORKS
-
-
-
... More
Wiring for circuit/sub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2X1.5 sqmm + 1x1.5 sqmm earth wire
380
182
-
... More
2X2.5 sqmm + 1x 2.5 sqmm earth wire
325
215
-
... More
2X4.0 sqmm + 1x 4.0 sqmm earth wire
225
261
-
... More
2X6.0 sqmm + 1x 6.0 sqmm earth wire
386
344
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. TV antenna socket outlet
45
115
-
... More
Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
35
289
-
... More
Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lamps per fitting, complete with all accessories including connection etc. as required.
45
93
-
... More
Installation, testing and commissioning of prewired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as required.
25
161
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
35
265
-
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
4
44
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required. upto 450 mm sweep.
4
352
-
... More
Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.
4
162
-
... More
Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, `C` curve including connections, painting etc. as required.
25
569
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current(BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM(tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
35
2139
-
... More
Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 V on surface /recess complete with , tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). 12 way, Double door
10
1814
-
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required.100 mm Dia
80
1415
-
... More
Supplying, installation, testing & commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars/lighting DBs for automatic switching On & Off of street lights at sunset & sun risr or twillight(Auto On, Auto Off, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c progamming at site complete required. 02 output per phase and suitable for single phase supply
4
6705
-
... More
Supplying assembling erecting connecting, testing and commissioning of feeder pillar with over voltage and under voltage relay with auto re-setting, manufactured using 1.9/1.6 mm thick CRCA sheet steel with power coated paint double door (front operated)with canopy base channel and cable gland entry from bottom for cable using, suitable alluminium busbar with provision of incoming & outgoing MCCB/MCB of L&T/Schneider/GE/ABB or Eq. make. Installation of feeder pillar of suitable c.c. foundation etc complete in all respect.
-
-
-
... More
Incoming :
-
-
-
... More
1No. Of 400 Amps FP MCCB of 36 KA service breaking capacity and 400 Amp trip setting.
-
-
-
... More
Metering : Voltmeter, Ammeter, Indication
-
-
-
... More
Bus Bar :
-
-
-
... More
1 Set of 500 Amps TPN Aluminium Bus Bars of suitable length and of cross section . Bus bar shall be insulated by heat shrinkable sleaves & clip on shrouds for joints. Bus bar shall be designed to with stand a fault level of 36 KA at 415 volts.
-
-
-
... More
3Nos. Phase indicating lamp each lamp shall have one toggle switch .
-
-
-
... More
Outgoing :
-
-
-
... More
Phase indication lamps on each outgoing to be provided.
-
-
-
... More
400Amp FP MCCB (36 kA) - 1 Nos.
-
-
-
... More
63 Amp. FP MCB- 1 No. -Spare
1
176225
-
... More
Supply & fixing of 7/9 W LED BULB complete in all respect.
55
142
-
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1X20 watt LED tube light complete including tube etc. on surface complete in all respect.
35
332
-
... More
Supply of AC 230/250 Volts, 50 Hz 55w 1400 rpm exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required.-Make: Havells-STANDARD -Refresh Air-SPS
-
-
-
... More
300mm sweep.
4
2137
-
... More
PLUMBING WORKS
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white plastic seat and lid
3
4889
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.
3
1410
-
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
... More
Semi rigid pipe
-
-
-
... More
a) 32mm dia
3
77
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3
1206
-
... More
Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge.
-
-
-
... More
15mm nominal bore
3
262
-
... More
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms.
3
126
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 110mm diameter
25
283
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
4
223
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm
4
278
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
4
41
-
... More
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.
-
-
-
... More
(internal work)
-
-
-
... More
Exposed on wall
-
-
-
... More
25mm dia nominal bore
10
414
-
... More
Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality.
-
-
-
... More
25mm dia nominal bore.
6
13
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
internal work -Exposed on wall
-
-
-
... More
20mm dia nominal outer dia pipes
45
251
-
... More
25mm dia nominal outer dia pipes
35
301
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Concealed work including cutting chases and making good the walls etc.
-
-
-
... More
15mm dia nominal outer dia pipes
45
373
-
... More
20mm dia nominal outer dia pipes
35
403
-
... More
25mm dia nominal outer dia pipes
30
470
-
... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.
-
-
-
... More
15mm nominal bore
10
73
-
... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
-
-
-
... More
15mm nominal bore
10
380
-
... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
-
-
-
... More
15mm nominal bore
5
430
-
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
... More
25mm dia nominal bore
5
467
-
... More
20 mm dia nominal bore
5
405
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
-
-
-
... More
25 mm nominal bore
4
348
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5000
8
-
... More
DEVELOPING STORAGE FOR STONE AND TERRACOTTA ANTIQUITIES WORK
-
-
-
... More
MODULAR SHELVING SYSTEM For Room 1 and 2: Compactus XTR Manually Driven at 6 compartment in the height with capacity 714 m gross and 692.58 net per room
-
-
-
... More
Product Overview:
The mobile shelving system, Compactus® Original XTR, is designed for optimal space utilization and energy efficiency, reducing lighting, cleaning, and security costs. It features an
ergonomic hand crank handle, allowing for easy operation, capable of moving up to 15 tons
with minimal effort (10 kg of force). The system is suitable for large archives, with safety
mechanisms to ensure secure use by all operators. The Compactus® XTR model supports
heavy items and offers low vibration through a "soft start soft stop" system.
Specifications:
• Dimensions: 7253 mm x 8000 mm x 2596 mm
• Loading Capacity:
• Each bay supports: 800 kg
• Maximum base capacity: 15,000 kg
• Standard system moves: 300,000 kg
• Four connected systems move: 1,200,000 kg
-
-
-
... More
Description Mobile Bases: The mobile bases are constructed from C-sections and are equipped with running and guiding wheels made from cast iron with dust-proof ball bearings, ensuring they are maintenance-free. The bases are coated with a 100% epoxy-polyester powder in RAL 9005, providing corrosion resistance. Each massive wheel supports up to 800 kg, and the drive system includes a floor chain for stability, allowing empty bases to move loaded ones. Wheel-driven systems (friction drive) are eliminated in favor of this approach. The bases possess a minimum height of 150 mm and can carry loads up to 15,000 kg. Wheels have a minimum diameter of 145 mm for optimal running conditions. Both static and mobile units share the same height, constructed from bases. A single mobile can move a block of mobiles, eliminating the need to move multiple units to access an aisle. Construction involves spot welding for enhanced strength and stability, with buffers applied to all mobiles.
-
-
-
... More
Uprights: The uprights are designed to be flush and closed on at least one side, maximizing dust prevention and creating clear compartments. Open uprights are not permitted. The top shelf maintains alignment with the top of the upright for a seamless appearance. Uprights are fully covered in RAL 9002 with an epoxy-polyester coating, avoiding galvanized materials due to pollutant emissions.
-
-
-
... More
Shelves: The shelves are mounted using four brackets that fully integrate within the shelf structure, resulting in a smooth surface devoid of projections or sharp edges. The design, bending the long sides three times and the short sides twice, enhances strength and minimizes deflection. The shelves are at least 33mm in height and uniformly coated in RAL 9002. Shelves are easy to remove without tools, incorporated with a top shelf to protect goods from dust and maintain a uniform system. Provision is made for future reinforcement bar installation if needed. Shelf brackets maintain their position when shelves are removed, with shelf positions adjustable in 20mm increments for flexibility. Load capacity is specified according to RAL standards, with minimal deflection.
-
-
-
... More
Rails: Rails are designed to create a flat floor that is unobstructed for personnel and trolleys. The entire rail system is galvanized, including cuts and boreholes, to prevent wear and rust.
-
-
-
... More
Cross-bracing: Cross-bracing provides rigidity and stability for individual bays and the overall system, adhering to RAL safety requirements for stability.
-
-
-
... More
Hand Crank: The hand crank is an ergonomic three-spoke wheel allowing single-hand operation from any position, with minimal physical effort required (max 10 kg). The mechanical drive system is fully enclosed to ensure user safety, and steering wheels are not included in the design.
1
14000000
-
... More
DIMAX for Room 3 and 4: modular storage system to archive any type of material, whether in bulk, boxes or containers. This makes it an optimal solution for all type of archive. Composed of 40 shelfs with 6 levels size 1000x500 mm height 2997 mm Total 240 bays and 240 Meters
1
2500000
-
... More
Pallet racking system for Hall 3 and 4 : APR12 • total capacity = 440 pallets • 3 bays x 2700 mm + 4 bays x 3600 mm with 880x1100 mm mesh shelves with a capacity of 1000 kg each (i.e. 3000 kg for the 2700 mm bay and4000 kg for the 3600 mm bay)
• 10 bays x 2700 with galvanized shelves with a capacity of 1539 kg/bay
1
3680000
-
... More
Environmental Control: Nr 6 DATA LOGGER MOD. EL-WIFI-TH with 2 registration channels temperature and humidity with wireless connectivity to PC via WiFi; with display, USP port, micro USB lead and wall bracket., suitable for indoor and outdoor environments. EL-WiFi-TH is supplied complete with EL-WIFI-WIN software, free download (not compatible with MAC) a rechargeable lithium battery.
-
-
-
... More
TECHNICAL SPECIFICATIONS - Measurement range: -20/+60°C – 0/100% RH - Accuracy: ± 1°C ± 3% RH - WiFi compliance: 802.11b - Reading number: 500.000 - Logging rate: min. 10s – max. 12hr - Protection degree: IP55 - Battery life: one year - Dimensions: 97.3x71.3x26.36 mm - Weight: 80 g
-
-
-
... More
• 4 Units of Dehumidifier FDC 32 portable, for rooms with temperature from +1°C to +35°C TECHNICAL SPECIFICATIONS - Power supply: 230V single-phase - Energy use: max 580W - Air flow: 380 m³/hour - Condensation capacity: 26 l/24 hours (30°C - 80% RH)
- Noise level: 43 dB(A)
- Reservoir capacity: 5.5 l
- Dimensions: 330x320xh660 mm
- Weight: 23 kg.
-
-
-
... More
• 2 Units of Dehumidifier FDNF 44 portable, for rooms with temperature from +1°C to +35°C
TECHNICAL SPECIFICATIONS
- Power supply: 230V single-phase
- Energy use: max 810W
- Air flow: 450 m³/hour
- Condensation capacity: 36 l/24 hours (30°C - 80% RH)
- Noise level: 46 dB(A)
- Reservoir capacity: 8 l
- Dimensions: 350x380xh 720 mm
- Weight: 39 kg
1
900000
-
... More
Lifting Systems: -
-
-
-
... More
• 1 Hydraulic manual operated Floor Crane 3 Ton capacity
• 2 Hydraulic manual operated Pallet stacker 1.5 Ton capacity
• 1Hydraulic manual operated Pallet Trolley 1.5 Ton capacity
• Set of Lifting/bracing belts 1.5 Ton capacity
• 400 Euro Pallet 1200x800 mm
1
1800000
-
... More
Padding/Boxing/Tagging: -
-
-
-
... More
• 250 Acid Free Ethafoam padding sheets 50mm thick 1200x1600 mm
• 5000 Acid Free Tissue 17 gsm size 1000x750mm
• 50 KIT OF SELF-ASSEMBLY WINDOW BOXES WITH LID “Guttuso”- Dimensions
(LxWxH): 265x165x50 mm Ext. 290x185x55 mm-The boxes of the kit “Guttuso” are all made from Duralong Special conservation board, ideal for long-term horizontal storage of archaeological materials, minerals, jewellery and small artifacts.
• 50 SELF-ASSEMBLY BOXES WITH LID “Bronzino” Dimensions (LxWxH): 280x125x220 mm Ext. 305x150x245 mm “Bronzino” boxes with separate lid are made from Duralong Wave archival micro corrugated board, ideal for long term vertical storage. The sturdy box style, with double walls on all sides and triple board lawyer on the base and the lid, avoids any distortion and makes the box particularly suitable for storing heavyweight artefacts • 15000 IDENTIFICATION LABELS WITH COTTON STRING Dimensions (LxWxH): 120x60 mm TECHNICAL SPECIFICATIONS 100% Cellulose Buffered (calcium carbonate reserve) pH 8.5 - 9.0 ISO 9706 Certified
1
1965000
-
... More
Design, Project Management including cost of planning, visit as required for project completion.
1
1000000
-
... More
AIR CONDITIONING SYSTEM
-
-
-
... More
Supplying installation ,testing and commissioning of energy efficient Split Air Conditioner with MCB 2.0 TON SPLIT AC of Approved Brand/Manufacture as per detailed estimate & direction of Engineer-in-charge.
4
55600
-
... More
COMPUTER WITH ALL ACCESSORIES
-
-
-
... More
Computer With All Accessories As Per Detailed Estimate & Direction Of Engineer-In-Charge.
4
45000
-
... More
GST Extra as applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%