Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date30 Jan 2025
Closing Date6 Feb 2025
Tender Amount₹ 1,10,00,000
Costs
EMD
₹ 2,20,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPPRC_1000373_1Tender No
33/GM-3/UPPCL/2024-25 DATED 20.01.2025Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal
size derived from natural sources)
26.58
4756
126427.24
... More
Supplying and filling in plinth with sand under floors, including watering, ramming,
consolidating and dressing complete.
16.58
1482
24586.65
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling
12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane
E.C. 20% with 1%
concentration
110.51
216
23924.31
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 (1 cement : 1.5 coarse sand : 3 stone aggregates) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M- 20. Ground Floor
7.57
8033
60815.26
... More
First Floor
1.55
8033
12452.27
... More
Second Floor
1.7
8033
13657.32
... More
As in item above but for slabs (Using 1:1.5:3(1 cement : 1.5 coarse sand : 3 stone aggregates) Mix concrete) (M-20) Ground Floor
21.75
8033
174733.41
... More
First Floor
21.48
8033
172564.31
... More
Second Floor
24.56
8033
197308.16
... More
As in item above but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3(1 cement : 1.5 coarse sand : 3 stone aggregates) Mix
concrete) (M-20) Ground Floor UPTO PLINTH LVL
5
6316
31580.95
... More
Ground Floor ABOVE PLINTH LVL
8.34
8033
67001.22
... More
First Floor
8.39
8033
67402.91
... More
Second Floor
0.88
8033
7069.67
... More
As in item above but in R.C.C. Raft foundation and footing with approved stone ballast.
(Using 1:1.5:3 Mix concrete)
26.96
6316
170284.48
... More
As in item above but in R.C.C. columns in
1:1.5:3 having strength not less than. (M-20) Ground Floor upto plinth lvl
8.79
6316
55519.31
... More
Ground Floor above plinth lvl
10.29
7578
77978.34
... More
First Floor
10.29
7578
77978.34
... More
Second Floor
11.61
7578
87981.39
... More
M-150 brick work in 1:6 (one cement : four coarse sand) of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for
proper completion of the work.
24.17
4980
120368.78
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a
piece of cloth lightly soaked in kerosene oil.
24.36
102
2485.94
... More
Brick work M-150 in super-structure above plinth level up to floor five level including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall 230mm thick to (1:6
cement & coarse sand). Ground Floor
44.74
6358
284467.21
... More
First Floor
47.36
6358
301125.77
... More
Second Floor
54.2
6358
344616.07
... More
Same as in item above but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. Ground Floor
48.57
784
38112.39
... More
First Floor
39.68
784
31136.5
... More
Second Floor
88.28
784
69272.43
... More
Providing & laying "brick bat Coba" 120 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete for proper completion of work.
137.79
1176
162078.24
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick (a) Single leaf
107.73
1670
179981.28
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of hold fast for chaukhats of
doors and windows.
331.2
91
30178.94
... More
Providing & fixing of door / windows grill.
1248.46
120
150464.4
... More
Z-Section steel windows
1203.98
91
110176.21
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved
steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1330
136
181279
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :with ISI marked M.S. pressed butt hinges bright finished of required size. 35 mm thick shutters Kiln seasoned and chemically treated hollock wood
35.91
2513
90246.86
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture
1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U
beading
48.16
655
31583.33
... More
TMT Fe-500 iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Ground Floor
98.85
7530
744402.78
... More
First Floor
45.6
7530
343396.73
... More
Second Floor
51.47
7530
387601.53
... More
Fixing of Door, windows / ventilators chaukhats in position. (a) Door chaukhats
58
1244
72190.86
... More
(b) Window chaukhats
39
785
30639.96
... More
(c) Ventilator chaukhats
12
594
7130.52
... More
15 mm cement plaster on plinth of mix : 1:4 (1 cement: 4 coarse sand). F.M.-2.25
36.62
287
10528.25
... More
15mm cement plaster in single coat on rough side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 coarse sand. F.M.-2.25 Ground Floor
404.65
276
111703.63
... More
First Floor
278.4
276
76852.32
... More
Second Floor
426.9
276
117845.75
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 coarse sand. F.M.-2.25 Ground Floor
336.53
239
80750.37
... More
First Floor
337.83
239
81062.31
... More
Second Floor
358.58
239
86041.27
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
576.14
54
31537.9
... More
Providing and laying vitrified floor tiles Kajaria KERRO Brand or Equivalent brand different sizes (thickness to be specified by the manufacturer) with water bsorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm=(1553.45*0.735) Ground Floor
83.99
1084
91103.95
... More
First Floor
83.99
1084
91103.95
... More
Second Floor
83.99
1084
91103.95
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than
0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm (Anti skid/mat finished tile) Ground Floor
10.96
1133
12420.86
... More
First Floor
10.96
1133
12420.86
... More
Second Floor
10.96
1133
12420.86
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc.Area of slab over
0.50 sqm [ Granite ] Ground Floor
4.31
3586
15457.47
... More
First Floor
4.31
3586
15457.47
... More
Second Floor
4.31
3586
15457.47
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) Ground floor
34.44
1360
46851.14
... More
First Floor
20.27
1360
27574.7
... More
Second Floor
22.43
1360
30513.1
... More
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Ground floor
7.49
1644
12314.83
... More
First Floor
5.79
1644
9519.74
... More
Second Floor
7.1
1644
11673.61
... More
Supply & fixing 6 mm thick china white glazed tiles in flooring or in skirting or dado laid with 1 :3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labours & tools etc, required for completion of the work. (size of tiles upto 300x
300 mm).
24.32
776
18895.18
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
153.9
776
119571.07
... More
40 mm cement concrete flooring 1:2:4 (1 cement
:2 coarse sand :4 graded stone aggregate of size 12.50mm and below) laid over base concrete and finished with floating coat of neat cement (base concrete to be paid seperately) including fixing of glass strips.
39.06
428
16751.66
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and
manufacture
206.09
157
32558.1
... More
Same as above but wooden painting
263.85
157
41683.02
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @
1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90
litre/10 sqm)
1109.95
119
132605.73
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Inner walls)
1032.94
129
133900.01
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Ceiling)
430.8
129
55844.6
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth
complete.
2573.69
108
280429.26
... More
Fixing panes of glass with and including Atul or equivalent ISI mark quality putty and brads and spring including supply of all materials, labour, T & P etc. required for proper completion the work.
: 4.0 mm thick glass panes.
48.16
743
35801.66
... More
Providing & fixing S.S. sliding door bolts ISI marked to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
58
365
21213.5
... More
Providing and fixing S.S. Steel tower bolts with necessary screws etc. complete
116
237
27550
... More
Providing and fixing S.S. Steel handles with screws etc. complete (a) 125 mm
116
95
11020
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
58
84
4926.52
... More
Supply & filling of cinder in sunken portion of building including braking in to required sizes including supply of all material, T&P required size including of supply of all material , labour, T&P required for proper completion of work.
5.94
1900
11286
... More
Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
46.82
430
20172.87
... More
P/F curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete (a) 25 mm dia.
98.4
366
36109.85
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
6.72
7987
53677.34
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (a) Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) One Side Laminated.
48.39
1850
89542.31
... More
Construction of drain along with apron (150 X 150 MM)
66.9
808
54055.2
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights Foundations, footings, bases of columns, etc. for mass concrete.
56.86
273
15569.41
... More
Columns,Pillars, Piers, Abutments, Posts and
Struts.
369.58
671
248073.18
... More
Lintels, beams, plinth beams, girders,
bressumers and cantilevers.
363.42
514
186866.93
... More
Suspended floors, roofs, landings, balconies and
access platform.
567.97
647
367732.18
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
136
1345
182947.2
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with
1.5 sq.mm. FRLS PVC insulated copper conductor single
core cable etc. as required.
3
1444
4333.08
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for
loop earthing as required.
15
315
4735.5
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel
conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
220
238
52452.4
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
310
269
83402.4
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
230
312
71773.8
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
160
429
68710.4
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
90
517
46590.3
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in
case of recessed conduit as required. 20 mm
290
93
27065.7
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch
25
75
1877.5
... More
3 pin 5/6 A socket outlet
22
88
1956.9
... More
TV antenna socket outlet
40
107
4316.4
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as
required.
24
269
6456.96
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular
plate as required.
12
29
349.92
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)
18
217
3910.86
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and
5/6 A modular switch, connections etc. as required.
18
347
6260.04
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
12
328
3937.2
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (for A.C. Point/MCB Point) Supplying and fixing PVC batten/ angle holder including
connections etc. as required.
12
80
962.4
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door
2
1608
3216.82
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
30
186
5599.5
... More
Supplying and fixing single pole blanking plate in the
existing MCB DB complete etc. as required.
12
9
113.76
... More
Supply and fixing of 63 Amp. DP MCB (CAT: A)
1
1121
1121
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with
inscription in single red colour on front side as required.
1
196
196.13
... More
Supply and burying of Safe Earthing Electrod T-19 Zn- Zinc Coated, Length 3000mm, outer pipe 48.4mmx3.2mm, inner pipe 26.9mm x 2.6 mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCm) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board,cost of 25x3 G.I. Strip will be extra) Make : As approved in U.P.P.W.D. & C.P.R.I.
Certified.
2
11115
22230
... More
Supply and laying of 25mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
55
85
4702.5
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness
35
487
17071.95
... More
300 mm width X 50 mm depth X 1.6 mm thickness
45
702
31595.85
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as
required. 100 mm dia
10
1316
13167.7
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as
required.
24
1990
47771.04
... More
Supply & fixing of Batton/Angle holder including making
connection etc. as required.
12
76
912
... More
Supply and fixing of LED Tube Light fitting suitable for up to 1X22 Watt LED Tube Light on surface complete in all
Respect .
72
828
59644.8
... More
Supply and fixing of 3 watt to 6 watt LED (spot light) fitting Confirming to IP 65 and above protection Complete in all respect. CAT. - AAA (Use as a Decorative Mirror
Light)
12
1757
21090
... More
Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc.
Following size size 35 sq mm x 3-1/2core
90
400
36081
... More
10 sqmm 4 core
105
310
32618.25
... More
Supply and fixing of brass nickle plated compression gland for pvc insulated & armoured served sheaththed ,underground cable including rubber ring etc. complete in all respect. Thearmouring of the cable shall be properly connected with the earth as per direction of engineer- incharge. for cable size 35 sq mm x 3-1/2core
2
169
338.2
... More
10 sqmm 4 core
2
82
165.3
... More
Supply and fixing of plain or pin type copper tin plated cable socket (lug) to cable leads for pvc insulated & armoured cable insulating with tape and making connection. complete in all respect as per direction of
engineer -incharge. for cable size 35 sq mm
4
29
117.8
... More
10 Sq.mm
4
19
76
... More
Supply & Erection of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreise Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above insulated with heat shrink sleeving and mounted on non gyroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm.Cubicletype switchboard shall be of cat A & B Only. CAT. B Cubicle Type Incoming - One (1) No.200Amp. TPN-1No.
Outgoing - Phase indication lamps on each outgoing to be provided. 63 Amp. MCCB- 3 No. OR outgoing as per site requirment(AS/SLD)
1
72865
72865
... More
Supply and Laying of 1800*900*12mm thick chequerd
rubber matting of tested quality. complete in all respect. as per I.E. Rules.
1
2422
2422.5
... More
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.
24
142
3420
... More
Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect.
12
266
3192
... More
Supply & fixing of 225/300mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete
in all respect.
12
2099
25194
... More
Supply and fixing of 1 Phase energy Meterin existing panel and other accessories including connections etc. complete as required 1Phase Meter
6
1140
6840
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
6
4725
28352.04
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
6
2765
16592.7
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in- charge.
6
722
4335.3
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
6
161
971.76
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm dia
6
135
812.58
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
6
495
2970.12
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
6
77
466.92
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 15 mm nominal bore
12
401
4812
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore
12
68
819
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 200 mm
6
4998
29992.62
... More
Providing & fixing PVC waste pipe for sink including PVC waste fittings Complete Flexible Pipe 32mm Dia
6
83
500.88
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with
C.P. brass screws and washers complete.
6
1122
6736.5
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15mm nominal bore
6
353
2123.22
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore
12
557
6694.44
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. For Internal Toilet
15 mm nominal outer dia Pipes
110
347
38234.9
... More
20 mm nominal outer dia Pipes
60
375
22522.8
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal bore
60
233
14034.6
... More
Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on Wall Terrace loop 20 mm nominal bore
60
305
18320.4
... More
UGT to OHT Transfer Pipe 25 mm nominal bore
25
385
9630.5
... More
32 mm nominal bore
40
465
18629.2
... More
Providing , checking, storing, fixing in position of approved quality Screwed ends Brass float valve with brass ball float and PTFE seat suitable for Body test pressure of 15Kg/sqcm of the following sizes: 40mm
6
5671
34029
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 20mm diameter pipe
60
16
973.8
... More
25mm diameter pipe
45
21
950.4
... More
32mm diameter pipe
60
25
1522.8
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.
complete : 25 to 40 mm nominal bore
2
636
1273.46
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : For vertical pipe connection with terrace ringmain 20 mm nominal bore
12
377
4524.24
... More
25mm nominal bore
2
434
869.18
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
3000
7
23040
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm dia (for rain water)
42
263
11067.84
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single Push Fit Coupler 110 mm dia
36
89
3207.6
... More
Plain bend 87.5 deg 110 mm dia
4
104
419.92
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall
etc. complete. 110 mm dia =(371.30*0.735)
24
259
6222.24
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
4
208
833
... More
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes. Internal Toilet (Soil & Waste Pipe) 75 mm
60
475
28500
... More
110 mm
55
674
37097.5
... More
Exposed on Wall & up to Manhole (Soil & Waste Pipe) 110 mm
75
674
50587.5
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Bend without door (87.5°) 110mm bend
6
247
1482
... More
Bend without door (45°) 100mm
12
209
2508
... More
75 mm
6
213
1282.5
... More
Single Tee with door 110mm
6
408
2451
... More
Reduced Tee with door 110mm x 75mm
12
356
4275
... More
Coupler 110mm
6
209
1254
... More
Vent Cowl 110mm
6
85
513
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes - 10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc.
For Wash basin & Urinal 32mm dia. pipe
18
156
2821.5
... More
Elbow (90°) 32mm
18
33
598.5
... More
Providing, fixing, jointing and testing , of PVC Multi Floor Trap with jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as
approved by Engineer-in-Charge. 110mm x 75mm x 50mm/40mm (Toilet)
6
1002
6013.5
... More
Providing, fixing, jointing and testing , of PVC Nahani Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as
approved by Engineer-in-Charge. 110mm x 75mm (Toilet)
6
916
5500.5
... More
110mm x 75mm (Kitchen)
6
916
5500.5
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia
12
26
315
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100mm size P-type With bricks of class designation M-150
4
1893
7573.76
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete: 100 mm dia
70
309
21681.8
... More
Excavating trenches of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m ncluding getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. All kind of soil Pipes, cables etc. exceeding 80 mm dia but not exceeding 300mm dia
75
245
18441.75
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm dia SW pipe
75
673
50523
... More
Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. (Rate is including Royality). From 0.00 mt to 1.50 mt
28.22
181
5128.99
... More
1.50mt to 3.0 mt
25.93
270
7008.62
... More
3.0 mt to 4.50 mt
6.91
358
2479.52
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form-
work, in foundation and floors.
2.77
4756
13175.45
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit in SLAB excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and excluding necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20. (9045.75+927.25)
2.28
6963
15877.12
... More
M-150 brick work in 1:4 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of
the work.
14.27
5146
73441.41
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two
level.
1.6
7530
12049.01
... More
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or
half brick wall.
60.96
353
21563.38
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12- 20mm nominal size laid in one layer neat cement (40 mm thick floor).
10
428
4288.7
... More
Providing and fixing soil, waste and vent pipes : 75 mm diameter : Sand cast iron
S&S pipe as per IS: 1729
2
729
1459
... More
Providing M.S. foot rests including fixing in manoholes with 20 x 20 x 10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: (With 20 x 20mm square bar)
6
380
2282.04
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With bricks of class
designation M-150
1
18756
18756.32
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 300 mm dia
120
314
37705.2
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size dia
65
361
23465
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia
40
391
15668.8
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
11
850
9355.17
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
18
550
9916.56
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of : 100 mm dia
1
114
114.51
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 100 mm clamp.
1
796
796.01
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 100 mm dia.
1
137
137.56
... More
Supply of submersible pump of make KSB 2.0 HP with control panel, support wire etc. complete.
1
23750
23750
... More
Providing 2 core PVC insulated submersible cable from pump panel to submersible pump
110
71
7837.5
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore
70
221
15494.5
... More
Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end)
1
504
504.21
... More
Supply of 100mm dia Johnson screen.
17
570
9690
... More
C.C. INTERLOCKING ROAD
Earth work in Excavation in trenches for foundations pipes cable etc in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 50 meter and including filling, watering and ramming of excavated earthdisposal of sur-plus earth as directed by the Engineer incharge up to a distance of 50 meters from the foundation trenches.
10.38
123
1286.5
... More
Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded Stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in
foundation and floors.
30.2
4756
143645.7
... More
M-150 brick work in 1:4 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
15.48
5146
79668.75
... More
Filing of carted earth
43.79
489
21418.56
... More
Providing and laying of 80mm thick interlocking cement concrete tiles (30 Mpa) including levelling and dressing of suface to required level and slope, filling joints with local sand including the cost of labour, Material and T & P etc. required for proper complition of work as directed by
Engineer-in-charge.
118.53
902
106973.33
... More
CONSTRUCTION OF DRAIN ALONG ROAD 0.30 MTR. WIDE & 0.45 MTR. DEPTH COVERED DRAIN AS PER DRAWING SEPCIFICATION ETC. ALL COMPLETE WORK.
75.5
2992
225914.88
... More
GST EXTRA AS PER APPLICABLE
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements