Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date30 Nov 2022
Closing Date7 Dec 2022
Tender AmountRefer Documents
Costs
EMD
₹ 5,57,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_UPPRC_754743_1Bid Award Id
ViewTender No
51/PCL/GM/Zone-6/Noida/2022-23 Dated 28.11.2022Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Balance Work of Construction of New District Institute of Education and Training (DIET) at Aslat Nagar, Murad Nagar at Distt.- Ghaziabad
BOQ Items
... More
Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.
50
-
437
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
721.58
-
190
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.
42.06
-
7940.37
... More
As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete)
192
-
8272.87
... More
As in item 6 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)
9.8
-
8510.37
... More
As in item 6 above but in R.C.C. Raft foundation & footing .(Using 1:1.5:3 Mix concrete)
87.98
-
7180.37
... More
As in item 6 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20.
13.3
-
8510.37
... More
First class brick work in 1:4 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, T & P etc reqiored for proper completion of the work.
266
-
4702.5
... More
Same as above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. Ground Floor
251.85
-
5263
... More
First Floor
221.72
-
5263
... More
Second Floor
16.02
-
5315.63
... More
Same as above but in 1:3 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. Ground Floor
11.31
-
5500.5
... More
First Floor
13.46
-
5500.5
... More
Second Floor
27.61
-
5555.51
... More
Providing and laying damp-proof course 25 mm thick with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 13 mm nominal size) and including waterproofing material as directed by the Engineer-in-charge.
94.62
-
313.5
... More
Painting on D.P.C. with two coats of air blown bitumen 85/50 or 85/25 @ 1.7kg/sqm approx including cost of fuel if any.
94.62
-
104.5
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
287
-
6435.3
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 sand
3154
-
232.16
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth. (1) 1 cement : 6 sand
2279.28
-
201.56
... More
15mm thick plaster in 1:4 (cement & coarse sand) in plinth.
226
-
252.85
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
1145.12
-
46.69
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
636.29
-
1189.6
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
102.03
-
1225.51
... More
Kota stone slab flooring over 25 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
146.23
-
1214.41
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
127.02
-
1434.97
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade
52.61
-
3177.16
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
68.88
-
790.16
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
338.91
-
816.8
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).
136
-
223.25
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick. (Single Leaf)
125.06
-
1495.73
... More
For Double Leaf
17.64
-
1516.93
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of hold fast for chaukhats of doors and windows.
424.8
-
53.2
... More
Providing & fixing of door / windows grill.
3000
-
60.33
... More
Z-Section steel windows with Openable panels excluding Glass panes.
2750
-
66.5
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
182
-
736.92
... More
Angle iron chaukhat (40x40x5)
1350
-
53.2
... More
Fixing of Door, windows / ventilators chaukhats in position. (a) Door chaukhats
70
-
285
... More
Fixing of Door, windows / ventilators chaukhats in position.(b) Window chaukhats
61
-
256.5
... More
(c) Ventilator chaukhats
22
-
142.5
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials.
4600
-
65.55
... More
Finishing walls with two coat of weather coat with cement primer of required shade to give an even shade including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
2279.28
-
99.75
... More
Providing wall putty on new surface with approved quality material of Berger / J.K. / Birla or similar to prepare the surface even and smooth complete.
6965.91
-
59.85
... More
Providing & fixing stainless steel sliding door bolts ISI marked to required colour or shade with nuts and screws etc complete. (a) 300mm x 16mm
70
-
332.5
... More
P/Fixing stainless steel tower bolts ISI marked to required colour or shade with necessary screws etc. (a) 250 mm x 10mm
70
-
190
... More
Same as above but 200 mm x 10mm
70
-
142.5
... More
Providing & fixing stainless steel handles ISI marked to required colour or shade with necessary screws etc. complete. 125 mm
140
-
95
... More
Providing and laying "brick coba" 120 mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finised smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono tythic plaster wall up to 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonany Coba with top finised plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour, T& P etc complete for proper completion of work.
718.64
-
1108.7
... More
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
539.45
-
79.8
... More
Same as above item but on new wood surface.
523.82
-
79.8
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick.
214.61
-
713.93
... More
Construction of drain along with apron.
160
-
534.85
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved red lead paint.
12.31
-
6873.75
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement
9
-
968.5
... More
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge
238.42
-
1529.19
... More
Providing & laying of light cinder filling under floor of toilets and other sunken roofs.
14.79
-
1092.5
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
47.86
-
369.11
... More
Providing & fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing & making curvature (wherever required) & fitting the same with necessary stainless steel nuts, bolts complete, i/c fixing the railing with necessary accessories & stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Eng-in-charge.
493.98
-
456.2
... More
P/F straight Grab bars in stainless steel 32mm dia, 60mm ciearance and 600 mm long
1
-
1520
... More
P/F drop down Grab bars in stainless steel 32mm dia.
1
-
1757.5
... More
Sanitory works :-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
4
-
4298.03
... More
Same as above but for European type W.C. pan with white plastic seat and lid
6
-
4170.75
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.
10
-
1990.22
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia C.P. brass Single Hole Basin Mixture approved quality and make ,including painting of fittings and brackets, cutting and making good the walls wherever require a) White Vitreous China wash basin size 550x 400 mm with 15 mm dia C.P. brass Single Hole Basin Mixture.
10
-
3491.22
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board of size 510x1040x200mm
2
-
4426.93
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe a) 32mm dia
10
-
69.53
... More
Same as above but 40mm dia
2
-
78.01
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
-
1017.17
... More
Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge. 15mm nominal bore
6
-
235.89
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet a) 100 mm diameter
10
-
120.42
... More
Providing and fixing CP Brass 32 mm size Bottal Trap of approved quality & make and as per thedirection of Enginer-in-charge.
10
-
700.06
... More
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.
10
-
472.09
... More
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms
10
-
125.7
... More
Providing and fixing Toilet paper holder a) C.P. brass
6
-
462.78
... More
Providing & fixing 50mm diameter G.I. Pipes spout including cutting & making good the walls etc.
2
-
623.71
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110mm diameter
110
-
241.83
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 110mm
42
-
228.95
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete. a) 110mm
14
-
193.48
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
14
-
37.46
... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints for vertical pipes and solvent cement joints for horizontal pipes, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, cowels, clamps, hangers, rubber rings, clean outs etc. fixing at wall / ceiling / floor level supported by clamp & hangers etc. inside duct / suspended from floor under false ceiling for proper completion of the work. The rubber ring shall confirm to IS:5382. (Make : Supreme / Ashirvad/Finolex / Prince) (Pipe support : Intellotech / Easyflex / Chilly) The Pipes will be supported by either rubber lined G.I. U strap clamps on 50x50x5 mm MS slotted angle duly painted (for a group of pipes) or G.I. rubber lined split clamp (for independent pipes). The The cost will include all support arrangements. The work includes cutting holes in wall/ floors/ slabs & making good the same with cement concrete 1:2:4 complete as required. The work includes commissioning of all pipes lines as per drawings, specifications & as directed by Engg-in-charge at site. 110 mm dia
45
-
907.25
... More
Same as above but 75 mm dia
35
-
593.75
... More
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Ashirvad/Finolex / Prince) 110x110 mm P-Type
25
-
641.25
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.. (Make : Supreme / Finolex / Prince) Reducing Door Tee 110x110x75 mm
14
-
384.75
... More
Door Tee 110x110x110 mm
14
-
418
... More
75x75x75 mm
16
-
232.75
... More
Bend 110 mm
24
-
209
... More
75 mm
16
-
114
... More
Terminal guard.110 mm
14
-
71.25
... More
75 mm
18
-
38
... More
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. (internal work) Exposed on wall 50mm dia nominal bore
30
-
623.71
... More
Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality. 50mm dia nominal bore.
30
-
18.52
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (internal work) Exposed on wall 20mm dia nominal outer dia pipes
60
-
243.34
... More
25mm dia nominal outer dia pipes
50
-
314.1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 15mm dia nominal outer dia pipes
100
-
324.76
... More
20mm dia nominal outer dia pipes
40
-
379.07
... More
25mm dia nominal outer dia pipes
35
-
445.5
... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. a) 15mm nominal bore
65
-
65.8
... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore
20
-
332.13
... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore
20
-
437.89
... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 a) 15mm nominal bore
10
-
421.75
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 20 mm dia nominal bore
2
-
364.84
... More
25mm dia nominal bore
4
-
394.13
... More
50mm dia nominal bore
2
-
689.08
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10000
-
6.97
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
120
-
288.72
... More
Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 100mm diameter
20
-
251.35
... More
150mm diameter
100
-
396.55
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 100mm diameter S.W. Pipe
20
-
647.7
... More
150mm diameter S.W. Pipe
100
-
791.99
... More
Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design 150 x 100 mm. size P type With Sewer bricks conforming to IS : 4885
6
-
1840.39
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75 (i) For Sewer Line
8
-
8645.25
... More
ELECTRICAL WORKS:- Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
200
-
579.5
... More
Wiring point for two ways light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and two number two way piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
4
-
751.45
... More
Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
66
-
637.45
... More
Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and piano type switches & socket etc., complete in all respects as directed, including matching color wash.
50
-
310.65
... More
Addition for light / fan points with modular type switch in place of piono type switch.
295
-
41.8
... More
Addition for two way points with modular type switch in place of piono type switch.
8
-
156.75
... More
Addition for HPSV/Exhaust Fan points with modular type switch in place of piono type switch.
7
-
44.65
... More
Addition for plug points with modular type switch in place of piono type switch.
50
-
78.85
... More
Supply fixing and concealing of 25mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of the work as per directions and to the satisfaction of engineer in charge. ( T.V. /Telephone)
30
-
68.4
... More
Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.
60
-
114.95
... More
Supply & wiring of submains with two number 4 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.
900
-
141.55
... More
Supply and wiring of submain 4 number 10 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVC conduit along with two numbers 6 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
250
-
479.75
... More
Supply and wiring of submain 4 number 16 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 40mm dia PVC conduit along with two numbers 10 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
30
-
686.85
... More
Supply & fixing of Recess/pendent/surface round 12 to 15 Watt LED Down lighter having powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. Cat. AA
6
-
1282.5
... More
Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting complete including tube on surface complete in all respect. 1 X 22 W CAT-AAA
200
-
1130.5
... More
Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting complete including tube on surface complete in all respect. 1 X 22 W CAT-AAA
5
-
1700.5
... More
Supply & Fixing of recess mounting round 15 to 18 Watt LED down lighter having powder coated die cast aluminium housing with heat sink, difuser / reflector and driver set complete in all respect. ( Mirror Light)
5
-
1700.5
... More
Supply and fixing of LED street light fitting havingdie cost aluminium body and diffuser with driver set suitable 75 to 90 Watt Confirming to IP 66 and above protection complete in all respects. On wall.
2
-
4769
... More
Supply and burying safe Earthing Electorde T-19 (Hot Dip Galvanized), Length 2000 mm, outer pipe 50mm, inner pipe 25, terminal Dia 12mm ,outer G.I.pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Gavanized up to 100 mircon filled with crystalline conducative mixture (CCM) having anti corrosive & conducative property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaning capacity along with 30 cm squre C.I. frame with hinged cover & masonry housing (from electode terminal to switch board , cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified
1
-
6127.5
... More
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.
30
-
85.5
... More
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.
60
-
199.5
... More
Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve 5 - 32 amps.Cat. A
130
-
247
... More
Supply and fixing of 40 Amp. 4 Pole MCB (10KA) CAT A
6
-
2161.25
... More
Supply and fixing of 63 Amp. 4 Pole MCB (10KA) CAT A
4
-
2175.5
... More
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 600x480x200 mm. size
10
-
617.5
... More
Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 600x480x200 mm. size
10
-
1634
... More
Supply and fixing of flush/surface mounting distribution boards without MCB with additional metal door complete in all respects.(CAT:A) 4 Way TPN
1
-
2926
... More
6 Way TPN
9
-
3477
... More
Supply and fixing of single pole MCB blanking plate CAT B
60
-
23.75
... More
Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work.
42
-
593.75
... More
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
59
-
133
... More
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
7
-
185.25
... More
Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required.
7
-
769.5
... More
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.
59
-
142.5
... More
Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
59
-
491.15
... More
Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system
59
-
1710
... More
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 185sqmm 3.5 core
50
-
1083
... More
Same as above but 50 sqmm 3.5 core
25
-
467.4
... More
Same as above but 35 sqmm 3.5 core
40
-
400.9
... More
Same as above but 16 sqmm 4 core
50
-
325.85
... More
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 185 sqmm 3.5 core
2
-
377.15
... More
Same as above but 50 sqmm 3.5 core
2
-
169.1
... More
Same as above but 35 sqmm 3.5 core
4
-
169.1
... More
Same as above but 16 sqmm 4 core
4
-
82.65
... More
Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of E/c. 185 Sq.mm
6
-
183.35
... More
Same as above but 95 Sq.mm
2
-
83.6
... More
Same as above but 50 sqmm
6
-
45.6
... More
Same as above but 35 sqmm
12
-
29.45
... More
Same as above but 25 sqmm
6
-
25.65
... More
Same as above but 16 sqmm
16
-
19.95
... More
MAIN DISTRIBUTION BOARD
S & F of surface/flush mounting 4 ways V TPN distribution board with additional door cithout MCB complete in all respect, as directed at site by Engineer in charge.
1
-
8132
... More
S & F of surface/flush mounting 6 ways V TPN distribution board with additional door cithout MCB complete in all respect, as directed at site by Engineer in charge.
2
-
8977.5
... More
S & F of 100 Amp 4P MCCB (25KA) Thermal Magnetic release.
3
-
7267.5
... More
S & F of 63 Amp FP MCB (10KA) C Curve.
3
-
2175.5
... More
S & F of 63 Amp TP MCB (10KA) C Curve.
6
-
1700.5
... More
S & F of 40 Amp TP MCB (10KA) C Curve.
4
-
1691
... More
Supply and fixing of danger board fabricated from 10 gauge M.S. sheet as per I.E.rules.
1
-
80.75
... More
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality.
1
-
2422.5
... More
S/F MODULAR BOXES, BASE & COVER PLATE :-Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75 mm)
1
-
193.61
... More
S/F MODULAR TYPE SWITCH / SOCKET :-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
1
-
94.82
... More
Telephone socket outlet
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.
30
-
15.93
... More
HOSTEL MAIN PANEL
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designAll bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports. The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm
Phase to neutral-minimum 15mm
MAIN PANEL
Incoming :
One (1) No 100 Amp. 4P MCCB of 25 KA Breaking capacity Metering :
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
One (1) No. (0-100A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
One (1) Set of Phase Indication Lamp.
Bus Bar :
One (1) No. 150 A, TPN aluminimum bus bar of suitable length.
Outgoing :
Phase indication lamps on each outgoing to be provided.
63 Amps TP MCB of 10KA (Ics=Icu) Breaking Capacity- 2 No + 1 No Spare
ed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.
1
-
50350
... More
Supply & erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required-Make: USHA Cat No. TURBO JET DLX 300mm sweep.
7
-
1757.5
... More
DATA / LAN jack point outlet
2
-
142.5
... More
FIRE FIGHTING WORKS:-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m. including getting out the excavated soil & then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. & disposing of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter.
12
-
288.72
... More
Supplying and fixing first-aid Hose Reel drum with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 40m
4
-
8040.95
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way - 100 mm dia M.S. Pipe
1
-
5250.68
... More
Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/cum density resin bonded fiber glass or 144 Kg/ cu m density mineral wool (non Combustible) pipe section insulation covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints and repairing of damage to building etc. as per specifications and as required. Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 100 mm
76
-
2027.77
... More
Same as above 80 mm
20
-
1713.84
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm
1
-
8633.74
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
-
14348.94
... More
Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. 5000 liters capcity.
5000
-
6.88
... More
Supplying, Installation, Testing & Commissioning of Electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required:
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS 1520.
(b) Suitable HP Squirrel cage indution motor, TEFC type synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, confirming to IS-325.
(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
450 lpm at 35 m Head
1
-
67956.88
... More
Supply & fixing of fire extinguishers, CO2 type 6.50 Kg capacity (ISI marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
2
-
18905
... More
Supply & fixing of fire extinguishers, ABC type 6.00 Kg capacity (ISI marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
4
-
8645
... More
Providing/Fixing of Fire Hose cabinet box made out of 18 gauge MS sheet including two coats of post office red paint over one coat of primer with 4 mm, thick glass door in front painted “FIRE” in red luminous paint. The size of the box should be 750 mm X 600 mm X 250 mm size capable of accommodating a pair of hose with coupling and nozzle. The box should be floor mounted type with railway coach lock arrangement and lever for opening the door after breaking the glass complete. Make : Standard Make
4
-
8360
... More
Providing/Fixing of cubical type floor mounted Fire pump control panel fabricated from 16 G M.S. sheet duly powder coated finish of approved shade and comprising of :
a) One 63 amp. TP+NL M.C.C.B with rotary handle of beacking capacity 35 KA.
b)One Volt meter (0-500 V) with selector switch.
c) One set including lamps. Make : Standard Make
1
-
42750
... More
OVER HEAD TANK :-
Earth work in exacavation in trenches
for foundations and for pipes cables etc. in ordinary soil(loan clay or sand)
including lift upto 1.5 m and dressing
of sides and ramming of bottom sand
disposal of surplus excavated earth as
directed by the Engineer i/c with in a
lead of 50m.
75.67
-
90.25
... More
Providing and laying in cement concrete
1:4:8 (1 cement :4 coarse sand :8 graded
stone aggregate 40 mm nominal size) and curing complete,including cost of form-
work,in foundation and floors.
5.92
-
5529
... More
R.c.c. work with cement approved coarse
sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:6,(1
cement :6 aggregate) in lintels of doors and windows excluding supply of
reinforcement and its fixing and binding
the same with 24 B WG binding wire and
including necessary centering and
shuttering etc.and also including supply
of all materials, labour and tools and plants etc, required for proper
completion of the works. strength of the
concrete shall not beless than M-200. 1:1.5:3 MIX.
0.84
-
8272.87
... More
Same as above but for +3500 LVL To '+7000 LVL.
0.84
-
8272.87
... More
Same as above but for +7000 LVL To '+10500 LVL.
0.84
-
8355.59
... More
Same as above but for +10500 LVL To '+14000 LVL.
0.84
-
8439.15
... More
Same as above but for at +14000 LVL. to '+18000 LVL.
7.16
-
8523.54
... More
Same as above but for +18000 LVL To Above
8.71
-
8608.78
... More
Same as above but for the lighter beams i.e. having spans upto 6 m. ( + 0 LVL To + 3500 LVL )
8.06
-
8510.37
... More
Same as above but for + 3500 LVL To '+7000 LVL.
1.55
-
8510.37
... More
Same as above but for + 7000 LVL To '+10500 LVL.
1.55
-
8595.47
... More
Same as above but for + 10500 LVL To '+14000 LVL.
1.55
-
8681.33
... More
Same as above but for + 14000 LVL To '+18000 LVL.
2.87
-
8768.23
... More
Same as item no. 6 but for +18000 LVL To Above
0.85
-
8855.92
... More
Same as above but in R.C.C. Raft foundation and footing with approved stone ballast
8.42
-
7180.37
... More
As in item 4 above but in R.C.C. columns in1:1.5:3having strength not less than M '-20 ( + 0 LVL To + 3500 LVL )
3
-
8510.37
... More
Same as above but for +3500 LVL To '+7000 LVL
1.68
-
8510.37
... More
Same as above but for +7000 LVL To '+10500 LVL
1.68
-
8595.47
... More
Same as above but for +10500 LVL To'+14000 LVL
1.68
-
8681.33
... More
Same as above but for +14000 LVL To '+18000 LVL
1.68
-
8768.23
... More
Mild steel or iron in plain work such as
reinforced concrete or reinforced, brick
work (when not included in anover all
rates ) wrought to required shape as necessary including bending for proper
completion of the work and including
supply of steel its wastage bend hooks
and authorised over lapping shall be
measured upto floor two level. (a) For + 0 LVL To +3500 LVL
27
-
6435.3
... More
(b) For + 3500 LVL To +7000 LVL
7
-
6435.3
... More
(c) For + 7000 LVL To +10500 LVL
7
-
6499.65
... More
(d) For + 10500 LVL To +14000 LVL
7
-
6499.65
... More
(e) For + 14000 LVL To +18000 LVL
14
-
6564.65
... More
(f) For + 18000 LVL To above
8
-
6564.65
... More
M.S.Work in railing.
1125
-
60.33
... More
Painting Ist coat over priming coat (but
excluding cost of priming coat) on steel
and other metal surfaces up to 10 cm.
width or girth or small articles not
exceeding 0.10sqm in area white superior
synthetic enamel such as LUXOL3,Hi-gloss
apcolite superlac, DULUX specified
brushing to give an even shade and
including cleaning the surface of all
dirt,dust and other foreign matter sand
papering and stoping including cost of
all materials, labour tools and plants
etc. required for proper completion of
the work. (PWD-641+642)
90
-
79.8
... More
12 mm cement plaster in single coat on
fair side of single or half brick wall for interior plastering up to floor
two level including internal rounded
angles not exceeding 80 mm in girth
and finshed even and smooth. (1)1 cement:6f. sand
380
-
201.56
... More
Providing and applying white cement based
putty of average thickness 1mm of approved
brand and manufacturer, over the plastered
wall surface to prepare the surface even
and smooth complete.
380
-
59.85
... More
Finishing walls with two coat of weather coat with cement primer of required shade to give an even shade including supply of all materials, labour, Tools & plants etc. required for proper completion of the work
380
-
99.75
... More
Class-150 brick work in 1:3 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.
3.4
-
5500.5
... More
20 mm thick cement plaster in dado/ skirting in 1:3 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.
30
-
209
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor).
23
-
395.08
... More
Construction of drain
41
-
534.85
... More
Providing & fixing of steel ladder
1
-
23750
... More
Extra Cost for Lighting conductor.
1
-
23750
... More
Cost for earthing..
1
-
23750
... More
Extra Cost for scaffolding.
50
-
950
... More
Cost for inlet outlet washout overflow water meter gauge etc.
1
-
47500
... More
Cost for Distributioin system
1
-
95000
... More
Pump Room:-
Earth work in excavation in trenches for foundation pipes cable etc. (Loan clay or sand) including lift up to 50m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer-in-charge within ahead of 30m.
11.63
-
90.25
... More
Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.
1.35
-
437
... More
Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) not less than strenght of M150 stone ballast, including cost of form work in foundation & floors.
2.84
-
5529
... More
Construction of drain along with apron.
15.78
-
534.85
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete(plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
12
-
190
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, T & P etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
1
-
7940.37
... More
Same as above but for slabs.
1.66
-
8272.87
... More
Class-150 brick work in 1:4 cement and coarse sand of 2.25 F.M. mortar in foundation and plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. (1:4 cement & coarse sand).
7.23
-
4702.5
... More
Painting on D.P.C. with two coats of air blown bitumen 85/50 or 85/25 @ 1.7kg/sqm approx including cost of fuel if any.
2.97
-
104.5
... More
Same as in item no. 8 above but in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms.
6.37
-
5263
... More
Same as in item no. 10 but in 1:3 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.
0.7
-
5500.5
... More
Providing and laying "brick coba" 120 mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finised smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono tythic plaster wall up to 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonany Coba with top finised plaster mixed with acetic water proofing compound @ 2% by weight & including s/o all material, labour, T& P etc complete for proper completion of work.
10.4
-
1108.7
... More
Providing & fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood & well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (a) Single leaf
1.9
-
1442.69
... More
M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. Providing & fixing of hold fast for chaukhats of doors and windows.
6
-
53.2
... More
Providing & fixing of door / windows grill.
36
-
60.33
... More
Z-Section steel windows
40
-
66.5
... More
Angle iron door chaukhats 40*40*5
13
-
53.2
... More
Fixing of Door, windows/ventilators chaukhats in position. Door Chaukhat
1
-
285
... More
Fixing of Door, windows/ventilators chaukhats in position. Window Chaukhat
1
-
256.5
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
2.18
-
6435.3
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
3.9
-
252.85
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand
53.5
-
232.16
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 fine sand.
33.3
-
201.56
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
12
-
46.69
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor).
9
-
395.08
... More
20 mm thick cement plaster in dado/ skirting in 1:3 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.
2.88
-
209
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).
9.47
-
223.25
... More
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour T & P etc. required for proper completion of the work.
4.73
-
79.8
... More
Same as item above but on new wood surface.
3.78
-
79.8
... More
Finishing wall with water proof cement paint of approved quality such as Snowcem, Durocem of required shade on undecorated wall surface to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including curing & cost of all materials labour T&P etc complete.
53.5
-
57
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials.
43.93
-
65.55
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick.
1.8
-
713.93
... More
Supply & fixing of glass strips for flooring 35mm wide - 3.8 to 4.7mm thick.
31.5
-
16.15
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (a) 250mm x 16mm
1
-
134.78
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (a) 250 mm x 10mm
1
-
58.79
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (a) 200 mm x 10mm
1
-
48
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
2
-
27.63
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110mm diameter
3.5
-
241.83
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
1
-
228.95
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
2
-
37.46
... More
Wiring points for light with 1.5 sqmm.FRLSH PVC insulated single core aluminium condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
2
-
579.5
... More
Addition for light / fan points with modular type switch in place of piono type switch.
2
-
41.8
... More
Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FRLSH PVC insulated multistranded copper conductor. cable as earth contunity wire etc. complete in all respects.
10
-
141.55
... More
Supply & fixing of LED Tube Light with batten suitable for up to 2 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA)
2
-
1700.5
... More
Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects. 8 Way SPN
1
-
1805
... More
Supply and fixing of 6Amp to 32 Amp(10 KA) MCB in existing MCB, DB complete with connections as required.
2
-
247
... More
Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge. 40 Amp. DP MCB CAT-A
1
-
432.25
... More
Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work.
1
-
593.75
... More
Rain Water Harvesting works:- Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed. In all kind of soil upto 1.5m depth
38.44
-
90.25
... More
In all kind of soil upto 1.5m to 3.0m. depth
38.44
-
104.5
... More
In all kind of soil upto 3.0m to 4.5m. depth
44.84
-
118.75
... More
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:4:8 (1 cement : 4 coarse sand : 8 gradded stone aggregae 40mm nominal size)
2.18
-
5529
... More
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
41
-
4702.5
... More
Reinforced cement concrete work in slab with 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20mm normal size).
1.5
-
8272.87
... More
Reinforcement for R.C.C. work including, straightening, cutting bending binding and placing in position complete.
116
-
64.35
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
84
-
252.85
... More
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of size 20mm ) as per standard design with 20x20mm sq bars.
24
-
334.71
... More
Supply and stacking of graded stone aggregate of 45-90mm size
6
-
1458.74
... More
Supply & stacking of stone chippings of 11.20mm.
5
-
1568.51
... More
Supply and stacking of moorum at site
5
-
640.4
... More
Drilling of 150mm dia bore hole.
50
-
475
... More
Supply of 100mm dia slotted rigid PVC pipe (4 Kg./sqcm pressure rating) and accessories.
50
-
522.5
... More
Supply and fixing of nylon jali around the slotted pipes complete as required.
2
-
1425
... More
Providing & packing of coarse sand around the pipe.
3
-
1425
... More
Transport of boring tools other required equipments and installation at site.
2
-
4750
... More
Lowering of 100mm dia rigid PVC pipe in bore hole including cutting jointing etc. complete.
50
-
109.25
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter.
225
-
288.72
... More
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 150mm diameter
200
-
396.55
... More
Same as above but 250mm diameter
25
-
930.48
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard design. *a) 150mm diameter S.W. Pipe
200
-
498.89
... More
b) 250mm diameter S.W. Pipe
25
-
682.7
... More
Constructing brick masonry Inspection chamber 60x60x75cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including CI cover with frame Light Weight complete as per design. With FPS bricks
33
-
6473.45
... More
External Sanitory work:- Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter.
10
-
288.72
... More
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 150mm diameter
10
-
396.55
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. a) 150mm diameter S.W. Pipe
10
-
792.1
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75 (i) For Sewer Line
1
-
8645.25
... More
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) a) 80mm nominal bore.
40
-
686.86
... More
Same as above but 65mm nominal bore.
100
-
567.63
... More
Same as above but 50mm nominal bore.
60
-
448.12
... More
Same as above but 32mm nominal bore.
10
-
336.69
... More
Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work. a) 80mm nominal bore.
40
-
206.25
... More
Same as above but 65mm nominal bore.
100
-
200.14
... More
Same as above but 50mm nominal bore.
60
-
126.81
... More
Same as above but 32mm nominal bore.
10
-
120.7
... More
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. a) 80mm
2
-
1758.3
... More
Same as above but 65mm
2
-
1179.73
... More
Same as above but 50mm
4
-
689.08
... More
Same as above but 32mm
1
-
460.8
... More
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks
1
-
7363.61
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm dia nominal bore
8
-
533.89
... More
Same as above but 50 to 80 mm dia nominal bore
6
-
1135.85
... More
SEPTIK TANK:-
Earth work in excavation Depth above 1.50 Mtr.
48.36
-
90.25
... More
Earth work in excavation Depth above 1.50 Mtr.
31.78
-
104.5
... More
P.C.C. in Foundation (1 :4 :8)
4.94
-
5529
... More
1st Class B/W in Septic tank (1cement : 4 coarse sand)
15.79
-
4702.5
... More
R.C.C. work in septic tank
3.22
-
8272.87
... More
M.S. work in R.C.C.
2.53
-
6435.3
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
58.2
-
218.93
... More
Providing M.S. foot rest including fixing with 20 x 20 x 10 cm cement concete block 1:3:6 (1 cement : 3 coarse :6 graded aggregate of nominal size 20 mm ) as per standard with 20x20 mm sqm. bar.
8
-
334.71
... More
Providing & fixing soil, wast and vent pipe. 75 mm dia sand cost iron S&S pipe.
2
-
731.93
... More
Providing & fixing sand cost iron terminal guard 75 mm dia.
2
-
225.46
... More
Providing & fixing C.I. tee at the inlet & outlet of septic tank.
2
-
451.89
... More
Providing & fixing plane sand cost iron S&S bend of required degree. 75 mm
2
-
245.64
... More
Providing lead caulked joints to sand cost iron/ cetrifugally cast (squn) irons pipes & fitting of dia. 75 mm
2
-
323.37
... More
Supply & fixing of medium quality R.C.C. Manhole cover with frame complete.HD.-20-Circular shape ,560 int. dia.
1
-
1166.57
... More
M.D.-10- square shape ,450 int. dia.
1
-
975.59
... More
PIT:-
Earth work in excavation Depth upto 1.50 Mtr.
15.01
-
90.25
... More
Earth work in excavation Depth upto 1.50 Mtr.
12.76
-
104.5
... More
P.C.C. in Foundation (1 :4 :8)
0.48
-
5529
... More
1st Class B/W in foundation
4.94
-
4702.5
... More
R.C.C. work (1:1.5:3)
0.69
-
8272.87
... More
ms work in rcc
0.54
-
6435.3
... More
Providing & filling of brick bat of O.B.B. / Class-150 inside of upper layer in soak pit.
11.67
-
676.4
... More
External Electrical Works:- Supply and laying of 3 core standered aluminium conductor XLPE (cross linked polyethlene ) insulated PVC bedded galvanised flat steel strip armoured cable confirming to I.S 7098 (part-II with latest amendment ) 11KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine rever sand all around and protected with well burnt bricks on sides and on top put across. the armouring of cable shell be properly connected with earth conductor by clamps etc. 70sqmm 3.0 core
60
-
869.25
... More
Supply & laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides & top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. the cable run shall be fixed on M.S. clamps etc. of suitable size. 10 sqmm 2.0core
50
-
277.4
... More
Same as above but 10 sqmm 4.0core
35
-
310.65
... More
Same as above but 50 sqmm 3.5core
25
-
467.4
... More
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire. 10 sqmm 2.0core
6
-
76
... More
Same as above but 10 sqmm 4.0core
4
-
82.65
... More
Same as above but 50 sqmm 3.5core
4
-
169.1
... More
Same as above but 150 sqmm 3.5core
3
-
289.75
... More
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 10 sqmm
10
-
19
... More
Same as above but 25 sqmm
2
-
25.65
... More
Same as above but 50 sqmm
5
-
45.6
... More
Same as above but 95 sqmm
3
-
83.6
... More
Same as above but 150sqmm
4
-
138.7
... More
Supply and burying earthing Electorde T-19 (Hot Dip Galvanized), Length 3000 mm, outer dia. 50mm inner dia. 25, terminal Dia12mm ,outer G.I.pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Gavanized up to 100 mircon filled with crystalline conducative mixture (CCM) having anti corrosive & conducative property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaning capacity along with 30 cm squre C.I. frame with hinged cover & masonry housing (from electode terminal to switch board, cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified
1
-
9538
... More
Supply and burying earthing Electorde T-19 (Hot Dip Galvanized), Length 3000 mm, outer dia. 76mm, inner dia.38, terminal Dia 12mm ,outer G.I.pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Gavanized up to 100 mircon filled with crystalline conducative mixture (CCM) having anti corrosive & conducative property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaning capacity along with 30 cm squre C.I. frame with hinged cover & masonry housing (from electode terminal to switch board , cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified
1
-
12065
... More
Supplying & Laying of 25mm x 3mm G.I. Strip for earthing purpose as required complete in all respects.
120
-
85.5
... More
Supplying & Laying of 32mm x 6mm Copper Strip for earthing purpose as required complete in all respects.
50
-
1054.5
... More
Supplying and fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P other material required for proper completion of the work as directed at site.
150
-
190
... More
Supply and erection of steel tubular pole 9.0 meters long designated 410 SP-29 in 1:3:6 cement concrete foundation including excavation, back filling etc. complete in all respects.
4
-
10903.15
... More
Supply and erection of 'D' clamps of 50x6mm flat iron on steel tubular poles/steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint.
16
-
211.85
... More
Supply and fixing of 100mm x 100mm shackle insulator/100mm x 80mm pin insulator including G.I. bolts/spindle nuts etc. complete in all respects.
16
-
75.05
... More
Supply and fixing of 75mm x 90mm shakle insulator/100mm x 65m pin insulator G.I. bolts/spindle nuts etc. complete in all respects.
4
-
64.6
... More
Supply and erection of stay set at least 3.5 meters away from the pole complete with galvanised 19mm dia x 1.80 meter long stay rod 30mm x 30mm x 6.3mm anchor plate, thimple, stay clamps, stay insultors, 19mm x 600mm double screw tightner 7/3.15 G.I. stay wire etc. in 1:3:6 cement concrete in all respects.
4
-
2877.55
... More
Supply and erection of overhead line with ACSR conductor on pole/service bracket including binding etc. complete in all respects.
40
-
249.85
... More
Supply and erection of overhead line with G.I. wire No. 8 SWG to 4 SWG on poles/service bracket including binding etc. complete in all respects.
40
-
62.7
... More
Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.
125
-
117.8
... More
Supply and fixing of LED street light fitting having diecast aluminium body and diffuser/reflector with driver set suitable for 45 watt to 50 Watt confirming to IP 65 protection complete in all respect.
4
-
4693
... More
Fabrication, supplying and installation of outdoor type feeder pillar of suitable size not less than 30 cm and upto 45 cm deep made out of M.S. sheet 2mm thick (14 SWG) duly compartmentalized, double door with locking arrangement (IP-54), duly fixed on MS angle iron frame work of size 50mm x 50mm x 6mm, 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement : 2 sand :4 stone aggrete 20mm) and having following accessories mounted inside the cubical panel i/c connection, inter connection with aluminium thimbles, earthing with two nos. earth struds duly painted with one coat of red oxide & two coats of superior quality enamel paint of approved shade complete etc. as reqd. Supplying & fixing of following accessories in the existing cubical panel board / feeder pillar including connection testing etc. as reqd. The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all interconnections by min. 2.5 sq.mm. Copper wires. Danger notice plate Main Feeder Pillar
INCOMER : 250AMP TPN MCCB (35KA)
BUS BAR : 250AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic Aluminium bus bar. Outgoing :
Phase indication lamps on each outgoing to be provided.
100Amp TP MCCB - 2No.
125Amp TP MCCB - 1No
100Amp TP MCCB - 2No-Spare
OR other as per SLD requirment
1
-
109250
... More
INTERLOCKING TILES:-
Earth work in excavation
18.24
-
90.25
... More
P.C.C. 1:4:8
31.67
-
5529
... More
B/W in Toe wall (1 cement : 4 coarse sand )
11.51
-
4702.5
... More
Providing and laying of Interlocking Concrete Block Pavements having 80 mm thick including leveling and dressing of surface to required level and slope, spreading and moisting 30mm thick local sand on bend, filling joints with local sand etc. for proper completion the work.
300
-
855
... More
Providing & filling of Carted earth /Earth in Embankment in 20 c.m thick layers including Mechanical Compaction Ramming and dressing the surface to Required levels and slopes i/c royalty and carriage up to 8 km. comp.
750
-
270.75
... More
Making Storm water Drain Av size (300x450)mm with cement concrete 1:4:8,Class-150 brick work in 1:4 cement and coarse sand,12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) and cement concrete 1:2:4.
150
-
2414.9
... More
INDIA MARK - II HAND PUMP:-
Supply of following sizes of P. V. C. pipes fittings ( 6 kg/cm2) (a) 110 mm dia P. V. C. pipe
80
-
285
... More
(b) 110 mm dia Slotted P. V. C. pipe
20
-
380
... More
12 mm dia M.S. connecting Rod with Hook & Thread
16
-
95
... More
Supply of 32 mm dia G.I. pipe ( Medium class).
48.4
-
285
... More
Supply of India Mark-II Hand Pump complete with 24 m connecting rod and one number Cylinder.
2
-
8075
... More
Hiring of boring T & P including its carriage upto site and return back after completion of work.
2
-
475
... More
150 mm dia boring by palm & pressure method in all type of strata and leveling the site after completion of work including supply of all labour etc. complete. (a) 0 to 30 M below G.L.
110
-
142.5
... More
Preparation of PVC assembly and lowering of 110mm/60mm PVC pipe and strainer including supply of all labour, carriage upto site etc. required for proper completion of work. (a) 0 to 30 M below G.L.
100
-
14.25
... More
Filling with coarse sand surrounding of hand pipe and below strainer and remaining base including supply of all labour, T & P, materials etc. required for proper completion of work.
3
-
1710
... More
Carriage of India Mark-II Hand pump, 32 mm dia G.I. Pile C/rod etc. for divisional store to site of work and its installation with G.I. Riser pipe including supply of all labour etc. complete with development of bole and its testing.
2
-
475
... More
Construction of precast platform for India Mark-II Hand Pump as per departmental type design including supply of all materials, etc. required for proper completion of work.
2
-
2042.5
... More
Excavation for collection of water for boring 2.5x2.5x1.5 = 9.375M3
18.76
-
166.25
... More
Water collection for pressure boring.
2
-
285
... More
Provision for unsuccessful bores
2
-
190
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements