Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date27 Jun 2024
Closing Date5 Jul 2024
Tender Amount₹ 3,32,72,000
Costs
EMD
₹ 6,65,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPPRC_932377_1Bid Award Id
ViewTender No
14/GM-3/UPPCL/2024-25 DATED 19.06.2024Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
2085.5
1020068
489.12
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
31.76
47097
1482.91
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
36.36
172945
4756.48
Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
-
-
Upto plinth level
-
-
-
(i) R.C.C. work in Footing
44.13
278733
6316.2
(ii) R.C.C. work in Beam
14.63
92405
6316.2
(iii) R.C.C. work in Columns
4.92
31075
6316.2
Above plinth to floor-V lvl
-
-
-
Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
-
-
(iii) R.C.C. work in Columns
10.56
80024
7578.07
(i) R.C.C. work in Lintel
1.43
10836
7578.07
(ii) R.C.C. work in Beam
15.37
116474
7578.07
(iv) R.C.C. work in Slab
37.94
287512
7578.07
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
131.53
990503
7530.63
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
76.71
21004
273.82
Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
268.68
157951
587.89
Columns,Pillars, Piers, Abutments, Posts and Struts.
169.62
113853
671.23
Edges of slabs and breaks in floors and walls Under 20 cm wide.
284.42
41417
145.62
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
33.83
168481
4980.09
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
17.5
5020
286.88
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
17.5
1785
102.05
Brick Work with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 ( 1 cement : 6 coarse sand)
49.6
315368
6358.23
Brick Work with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 ( 1 cement : 4 coarse sand)
10.1
65899
6524.69
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
-
-
-
Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge.
-
-
-
Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
-
-
-
The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
272.67
320735
1176.27
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
-
-
-
(a) Single leaf
9.56
23188
2425.62
(b) Double leaf
2.52
6300
2500.12
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer
-
-
-
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size
110.1
10893
98.94
Supply and fixing of anodised /aluminium windows having 2 mm thick aluminium section excluding coating & an average coating of 20 micron fully glazed made of aluminium door tube size 83.5x 44.65 mm as vertical member & 1114.00 x 44.45 mm size tube in bottom and horizontal members door chaukhat should be of aluminium tublar vertical with two openable shutters. The rate will include cost of material fixtures, 5mm glass handles, locks, screw necessary beeding & excluding cost of floor spring if required for proper completion of work as per direction of Engineer I/C.
51.84
19541
376.95
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodiccoating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P.
brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction
of Engineer-in-charge. (Only weight of grill to be measured for payment).
32.4
14441
445.73
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :
-
-
-
30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood
2.52
7613
3021.19
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and
1.4 mm aperture on both sides
12.96
10257
791.5
Design supply & installation of suspended Spider Glazing systemdesigned to withstand the wind pressure as per IS 875 (Part-III). TheSuspended System held with Spider Fittings of SS-316 Grade Steelof approved manufacturer with glass panel having 12 mm thick cleartoughened glass held together with SS- 316 Grade Stainless steelSpider & bolt assembly with laminated glass fins 21 mm thick. TheGlass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchorbolts and at the bottom using SS channel of 50x25x2mm usingfastener & anchor bolts, non staining weather sealants of approvedmake, Teflon/ nylon bushes and separators to prevent bi-metalliccontacts, all complete to perform as per specification and approveddrawings. The complete system to be designed to accommodatethermal expansion & seismic movements etc. The joints betweenglass panels (6 to 8 mm) and gaps at the perimeter & in U channelof the assembly to be filled with non staining weather sealant, so as
to make the entire system fully water proof & dust proof.The rate shall include all design, Engineering and shop drawingincluding approval from structural designer, labour, T&P, scaffolding,other incidental charges including wastage, enabling temporaryservices all fitting fixers nut bolts, washer, Buffer plates, fastener,anchors, SS channel laminated glass etc. all complete. For thepurpose of payment, actual elevation area of Glazing includingthickness of joints and the portion of Glass panel inside the SSchannel shall be measured.
1.58
10483
6635.02
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
12.96
9634
743.39
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarsesand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforcedwith 1.6 mm dia mild steel wire, including centering and shuttering,roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement:3 fine sand) etc. complete, excluding plastering of the jambs, sills andsoffits
11.32
13488
1191.6
Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mmsize, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia
steel pulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primer.
4.26
34027
7987.7
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
129.72
7101
54.74
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)
388.96
107373
276.05
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. 1:6 (1 cement: 6 coarse sand)
376.72
90395
239.95
6 mm cement plaster on celling (a) 1:3(1 cement:3 fine sand)
262.3
55027
209.79
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
43.07
22534
523.2
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, includingcement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate
84.17
37683
447.72
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
202.77
219943
1084.7
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
16.9
19152
1133.3
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red
11.54
41387
3586.42
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red
49.14
176236
3586.42
Supply and fixing 6 mm China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm).
24.08
18438
765.67
Steel Painting:Applying priming coat:
-
-
-
(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
29.3
4628
157.98
Steel Painting:Applying priming coat:
-
-
-
(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
24.15
3815
157.98
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats Internal wall surface)
651.26
73531
112.91
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
376.72
45007
119.47
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1027.98
112010
108.96
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete. (a) 250mm x 16mm.
12
2183
181.96
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
-
-
-
300 x 10mm
12
1090
90.84
200 x 10mm
12
835
69.62
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (a) 125 mm.
12
555
46.26
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper
3
151
50.52
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
96.9
52260
539.33
Providing and fixing tiled false ceiling of specified materials of size
595x595 mm in true horizontal level, suspended on inter locking
metal grid of hot dipped galvanized steel sections ( galvanized @
120 grams/ sqm, both side inclusive) consisting of main "T" runner
with suitably spaced joints to get required length and of size 24x38
mm made from 0.30 mm thick (minimum) sheet, spaced at 1200
mm center to center and cross "T" of size 24x25 mm made of 0.30
mm thick (minimum) sheet, 1200 mm long spaced between main
"T" at 600 mm center to center to form a grid of 1200x600 mm and
secondary cross "T" of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the1200x600 mm panel to form grids of 60x600 mm and wall angle ofsize 24x24x0.3 mm and laying false ceiling tiles of approved texturein the grid including, required cutting/making, opening for serviceslike diffusers, grills, light fittings, fixtures, smoke detectors etc. Main"T" runners to be suspended from ceiling using GI slotted cleats ofsize 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanised
butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mmcenter to center along main T, bottom exposed width of 24 mm of allT-sections shall be pre-painted with polyester paint, all complete for
all heights as per specifications, drawings and as directed byEngineer-in-charge
-
-
-
12.5 mm thick square edge PVC Laminated Gypsum
Tile of size 595x595 mm,madeofGypsumplasterboard,manufactured from natural gypsum as per IS 2095 part Iand laminated with white 0.16mm thick fire retardant
PVC film on the face side and 12micron metalized
polyester on the back side with all edges sealed with
226.14
475887
2104.39
Plumbing Work
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
-
-
-
W.C. pan with ISI marked white plastic seat and lid
1
4549
4549.48
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
-
-
-
Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern
-
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.
1
1312
1312.15
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required
-
-
-
Kitchen sink with drain board
-
-
-
510x1040x200mm
-
-
-
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
a) 32mm dia
1
72
72.55
b) 40mm dia
1
81
81.49
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1
1122
1122.75
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms.
1
117
117.55
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.
1
495
495.02
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.
-
-
-
110mm diameter
25
6588
263.52
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
6
1249
208.25
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110mm
24
6222
259.26
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
6
229
38.19
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.
-
-
-
(internal work)
-
-
-
Exposed on wall
-
-
-
32mm dia nominal bore
15
6986
465.73
Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality.
-
-
-
32mm dia nominal bore.
15
232
15.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
internal work -Exposed on wall
-
-
-
20mm dia nominal outer dia pipes
25
5847
233.91
25mm dia nominal outer dia pipes
15
4205
280.38
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work including cutting chases and making good the walls etc.
-
-
-
15mm dia nominal outer dia pipes
25
8689
347.59
20mm dia nominal outer dia pipes
15
5630
375.38
25mm dia nominal outer dia pipes
20
8763
438.19
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.
-
-
-
15mm nominal bore
2
136
68.25
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
-
-
-
15mm nominal bore
4
1415
353.87
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15mm nominal bore
4
2231
557.87
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
-
-
-
15mm nominal bore
2
802
401.01
Providing & fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
4
208
52.23
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
25mm dia nominal bore
2
869
434.59
20 mm dia nominal bore
2
754
377.02
32mm dia nominal bore
2
963
481.51
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
-
-
-
25 mm nominal bore
4
1296
324.02
Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
7000
53767
7.68
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
25
6147
245.89
Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
100mm diameter
10
3097
309.74
150mm diameter
15
7287
485.84
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
100mm diameter S.W. Pipe
10
6736
673.64
150mm diameter S.W. Pipe
15
12357
823.83
Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design:
-
-
-
150 x 100 mm. size P type
-
-
-
With Sewer bricks conforming to IS : 4885
6
11360
1893.45
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design
-
-
-
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
-
-
-
With FPS bricks of class designation 75
-
-
-
(i) For Sewer Line
7
62419
8917.04
Extra for depth of man hole size 90x80 cm
3
18487
6162.34
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design
-
-
-
With 20x20 mm square bar
20
7606
380.34
Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before but excluding supply and cost of other fIttlings such as elbow,bend,tee and y-tee including supply of al marerial labour and T&P.Required for proper completion of work.
-
-
-
75 mm O.D.
25
5935
237.41
110 mm O.D.
15
4713
314.21
Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.
4
2541
635.41
Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735.
-
-
-
Size 75 mm
4
418
104.74
Size 110 mm
1
143
143.14
Supply and fixing of UPVC S.W.R. plain tee confirming to IS-14735.
-
-
-
Size 75x75x75 mm
2
240
120.1
Size 110x110x110 mm
1
185
185.04
Electrical
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
Group C
45
46094
1024.33
Wiring for circuit/sub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2X1.5 sqmm + 1x1.5 sqmm earth wire
350
56942
162.69
2X2.5 sqmm + 1x 2.5 sqmm earth wire
250
48004
192.02
2X4.0 sqmm + 1x 4.0 sqmm earth wire
200
46643
233.22
2X6.0 sqmm + 1x 6.0 sqmm earth wire
150
45979
306.53
Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
50
1640
32.82
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:
-
-
-
20mm
1000
89376
89.38
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
-
-
-
TV antenna socket outlet
45
4650
103.34
Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
13
3349
257.65
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
7
195
27.93
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 module(75mm X 75 mm )
7
1456
208.08
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connection etc. as required.
7
2331
333.07
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connection etc. as required.
7
2864
409.18
Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/woodedn block including connectionetc. as required.
13
789
60.75
Supplying and fixing brass batten/angle holder including connectionetc. as required.
23
2103
91.47
Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lamps per fitting, complete with all accessories including connection etc. as required.
4
332
83.09
Installation, testing and commissioning of prewired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as required.
23
3308
143.84
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
13
3077
236.71
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
14
557
39.8
Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required.
-
-
-
upto 450 mm sweep.
1
314
314.21
Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.
1
144
144.54
Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, `C` curve including connections, painting etc. as required.
7
3553
507.63
Providing and fixing circular/Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3 mm dia round headed screwed, one loc at the conrners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
13
1681
129.32
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current(BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM(tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
13
24780
1906.22
Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 V on surface /recess complete with , tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators).
-
-
-
12 way, Double door
7
11315
1616.45
Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single Pole
7
1251
178.75
Double Pole
3
1374
458.05
Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required.
4
36
9.08
Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required.
30
156519
5217.32
Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
25
2513
100.55
Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required.
25
890
35.61
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
Upto 35 sq. mm
15
4053
270.22
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2 X 10 sqmm. (19mm)
15
2524
168.28
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required.
-
-
-
50 mm Dia(Rate taken From Civil DSR 2021-18.12)
30
13703
456.8
PART B - NON - SCHEDULED ITEMS (AS PER MARKET RATES)
-
-
-
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554.
-
-
-
10 sqmm 2 core
15
3058
203.89
Supply and erection of 1X10 W mirror light complete in all respects
1
733
733.16
Supply & fixing of 7/9 W LED BULB complete in all respect.
7
733
104.74
Supply and fixing of LED Tube Light with batten suitable for up to 1X20 watt LED tube light complete including tube etc. on surface complete in all respect.
23
5620
244.39
Supply of AC 230/250 Volts, 50 Hz 55w 1400 rpm exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required.-Make: Havells-STANDARD -Refresh Air-SPS
-
-
-
300mm sweep.
1
1571
1571.06
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.
-
-
-
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only.
-
-
-
The minimum clearances between bus bars shall be as follows :
-
-
-
Phase to phase - minimum 20mm
-
-
-
Phase to neutral-minimum 15mm
-
-
-
CUBICAL PANEL BOARD ( MCCB TYPE )
-
-
-
SUB PANEL-1 (IN SUBSTATION)
-
-
-
Incoming :
-
-
-
one (1) No.250Amp. MCCB-1No.
-
-
-
Metering :
-
-
-
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
-
-
-
One (1) No. (0-250A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
-
-
-
One (1) Set of Phase Indication Lamp.
-
-
-
Bus Bar :
-
-
-
One (1) No.315 A, TPN aluminimum bus bar of suitable length.
-
-
-
Outgoing :
-
-
-
Phase indication lamps on each outgoing to be provided.
-
-
-
100 Amp. 4P MCCB- 1 No.
-
-
-
63 Amp. 4P MCB- 1 No.
-
-
-
32 Amp. SP MCB-2 No.
-
-
-
100 Amp. 4P MCCB- 1 No-Spare.
-
-
-
63 Amp. 4P MCB- 1 No-Spare.
-
-
-
OR outgoing as per site requirment
1
157106
157106.25
INTERNAL HYDRANT SYSTEM
-
-
-
Supplying, Installation, Testing & Commissioning of Electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required:(Terrace Pump)
-
-
-
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS 1520.
-
-
-
(b) Suitable HP Squirrel cage indution motor, TEFC type synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, confirming to IS-325.
-
-
-
(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
-
-
-
(d) Suitable cement concrete foundation duly plastered with anti vibration pads.
-
-
-
450 lpm at 35 m head
1
60191
60191.25
Providing, laying, testing & Commissioning of 'B' class heavy duty MS pipe confirming to IS 1239 including welding, fittings like elbows,tee, flanges,tapers,nut bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of syntetic enamel paint of required shade complete as required:
-
-
-
100 mm dia
60
71975
1199.59
Supplying & fixing single headed internal yard hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel, ISI marked, confirming to IS 5290(type A) with blank Gunmetal/Stainless Steel cap and chain as required:
-
-
-
Single headed Gunmetal
1
5338
5338.82
Supplying, fixing, testing & commission of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes as required:
-
-
-
100 mm dia
1
4655
4655.23
Providing, installation, testing and commission of non-return valve of following sizes confirming to IS: 5312 complete with rubber gaskets GI bolts, nuts, washers etc as required:
-
-
-
100 mm dia
1
7715
7715.66
Supplying & fixing orifice plate made out of 6 mm thick stainless steel(grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required:
1
922
922.39
Supplying & fixing 63 mm dia, 15m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. confirming to IS 636(type-A) as required:
-
-
-
Gun Metal
1
3632
3632.3
Supplying & fixing First-aid hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required.
-
-
-
20 mm nominal internal dia water hose thermoplastic(Textile reinforced) type-2 as per IS:12585
-
-
-
20 mm nominal internal dia gun metal globe valve & nozzle.
-
-
-
Drum and brackets for fixing the equipments on wall.
-
-
-
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
30 m
1
6057
6057.32
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle confirming to IS:903 suitable for instantaneous connection to interconnect hos pipe coupling as required.
-
-
-
Gun Metal
1
1686
1686.97
Providing & fixing of pressure switch in M.S. pipe line including connection etc as required.
1
1079
1079.5
Supplying & fixing air vessel made out of 250 mm dia,8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
1
12738
12738.87
Supply & fixing of fire extinguisher, ABC Type 6.00 kg. capacity(ISI Marked IS:15683 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD-2018
1
6354
6354.08
Supply & fixing of CO2 type fire extinguisher, 6.5 kg. capacity(ISI Marked IS:2878 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD-2018
1
13895
13895.18
Fire man axe.Make :- Rcube Fire Protection Services Pvt. Ltd. /R.K. Engineers Services. CE Certified,ISO 13485:2016 & OHSAS 18001:2007 Approved.
1
1361
1361.59
Providing/Fixing of Fire Hose cabinet box made out of 18 gauge MS sheet including two coats of post office red paint over one coat of primer with 4 mm, thick glass door in front painted “FIRE” in red luminous paint. The size of the box should be 750 mm X 600 mm X 250 mm size capable of accommodating a pair of hose with coupling and nozzle. The box should be floor mounted type with railway coach lock arrangement and lever for opening the door after breaking the glass complete. Make : Standard Make
1
6633
6633.38
Supplying and fixing of Self Glow Exit signage for stairs and exits size 100 x 300. Make :- Rcube Fire Protection Services Pvt. Ltd. /R.K. Engineers Services. CE Certified, ISO 13485:2016 & OHSAS 18001:2007 Approved.
1
1920
1920.19
Providing/Fixing of cubical type floor mounted Fire pump control panel fabricated from 16 G M.S. sheet duly powder coated finish of approved shade and comprising of :a) 40 amp 3 Pole MCCB, 50Hz with breaking capacity 10KW.b)One Volt meter (0-500 V) with selector switch.c) One set including lamps.Make :- Rcube Fire Protection Services Pvt. Ltd. /R.K. Engineers Services. CE Certified,ISO 13485:2016 & OHSAS 18001:2007 Approved.
1
29675
29675.63
Supplying, installation, testing & commissioning of Manual call Boxes of MS constuction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
2
661
330.97
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box(16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching trasformer etc. complete as required.
2
777
388.93
Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone cenclosed in a M.S. box(16 SWG)/ABS box with break glass in front etc. complete as required.
2
1263
631.92
Supplying & laying of 2X1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
30
7520
250.67
Supplying & laying 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
30
1110
37.01
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilityes as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.
-
-
-
6 Zone
1
8503
8503.29
LED Street Light
-
-
-
Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required.
1
7098
7098.4
Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
50
6840
136.8
Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required.
25
1211
48.45
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required.
-
-
-
100 mm Dia
15
25735
1715.7
LAYING AND TERMINATION OF CABLE :
-
-
-
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
Upto 35 sq. mm
50
18382
367.65
Above 35 sq. mm and Upto 95 sq. mm.
25
9618
384.75
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2 X 6 sqmm. (19mm)
2
456
228
2 X 10 sqmm. (19mm)
2
457
228.95
4 X 16 sqmm. (28mm)
2
587
293.55
3.5 X 70 sqmm. (38mm)
2
889
444.6
CABLES
-
-
-
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554.
-
-
-
6 sqmm 2.0 core
25
6555
262.2
10 sqmm 2.0 core
50
13870
277.4
16 sqmm 4.0 core
25
8170
326.8
35 sqmm 3.5 core
25
9998
399.95
EXTERNAL LIGHTING
-
-
-
Supply, installation, testing and commissioning of external post top lantern with follong and complete as required.
-
-
-
6m high(5.0m above ground) 65mm dia GI pole as approved, adopting socket at top for fixture mentioned below, base plate 300x300x6mm and provision for mounting junction box etc.-1 set
1
11875
11875
Erection of pole in cement concrete 400x400x1000mm deep 1:3:6 ratio cement concrete foundation including excavation, refilling, secured with holding clamps, bolts, nuts, alighnment of poles casting etc. including 100 mm thick lean concrete shall be provided at the bottom.
1
5225
5225
LED type 50 watt(street light) fittings of all types with all accessories.
1
7502
7502.63
Suitable size control box with 1 no. incoming and 2 nos. outgoing terminals and 2 nos. tap-out terminal with 1 no. 5A hrc fuses complete.-1set
1
1425
1425
Suitable number(S) 40mm dia class-B GI Pipes from above control box to upto 0.5 meter below ground level for power cable entry.
1
712
712.5
PANELS
-
-
-
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.
-
-
-
The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only.
-
-
-
The minimum clearances between bus bars shall be as follows :
-
-
-
Phase to phase - minimum 20mm
-
-
-
Phase to neutral-minimum 15mm
-
-
-
CUBICAL PANEL BOARD ( MCCB TYPE )
-
-
-
SUB PANEL-1 (IN SUBSTATION)
-
-
-
Incoming :
-
-
-
one (1) No.250Amp. MCCB-1No.
-
-
-
Metering :
-
-
-
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
-
-
-
One (1) No. (0-250A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
-
-
-
One (1) Set of Phase Indication Lamp.
-
-
-
Bus Bar :
-
-
-
One (1) No.315 A, TPN aluminimum bus bar of suitable length.
-
-
-
Outgoing :
-
-
-
Phase indication lamps on each outgoing to be provided.
-
-
-
100 Amp. 4P MCCB- 1 No.
-
-
-
63 Amp. 4P MCB- 1 No.
-
-
-
32 Amp. SP MCB-2 No.
-
-
-
100 Amp. 4P MCCB- 1 No-Spare.
-
-
-
63 Amp. 4P MCB- 1 No-Spare.
-
-
-
OR outgoing as per site requirment
1
213750
213750
Devlopment of yard
-
-
-
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
411.75
840903
2042.28
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.
268.53
398208
1482.91
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour &pattern over 50mm thick ompacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
-
-
-
80 mm thick C.C. paver block of M-30 grade with approved
color design and pattern
1790.21
1364390
762.14
Boundarywall
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
all kinds of soil
391.59
71173
181.75
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
49.26
234304
4756.48
Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
-
-
Upto plinth level
-
-
-
(i) R.C.C. work in Footing
99.45
628145
6316.2
(ii) R.C.C. work in Beam
29.14
184053
6316.2
(iii) R.C.C. work in Columns
9.25
58424
6316.2
Above plinth to floor-V lvl
-
-
-
Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
-
-
(iii) R.C.C. work in Columns
22.2
168233
7578.07
(ii) R.C.C. work in Beam
6.01
45544
7578.07
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
168.84
1271470
7530.63
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
222.04
60798
273.82
Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
300.69
176773
587.89
Columns,Pillars, Piers, Abutments, Posts and Struts.
445.48
299018
671.23
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
263.68
1313151
4980.09
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
47.64
13666
286.88
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
47.64
4861
102.05
Brick Work with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 ( 1 cement : 4 coarse sand)
81.64
519085
6358.23
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
462.6
25324
54.74
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. 1:6 (1 cement: 6 coarse sand)
1032.98
247867
239.95
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
1032.98
123411
119.47
Buffer Strip
-
-
-
Earth work in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead up to 30M and including filling watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trenches or in to the the plinth and removal and disposal of surplus earth as directed by the Engineer i/c with in a lead of 50m.
-
-
-
in edging wall
24.82
4510
181.75
Fine Sand Filling in Plinth under floor including watering ,rammining , consolidating & dressing complete including lead upto 50m and lift upto 1.5M including cost of sand
-
-
-
in floor
33.84
50181
1482.91
Providing and laying in cement concrete 1:2:4 (1 cement :4coarse sand :4 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
-
-
-
Same as above but 1:4:8
-
-
-
in edging wall
-
-
-
in floor
21.43
101940
4756.48
Class 150 brick work in 1:4 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
-
-
-
in edging wall LOW LAND
42.29
275922
6524.69
Providing and laying matt finished vitrified tile of size 300x300x9.8mm
having with water absorption less than 0.5% and conforming to IS:
15622 of approved make in all colours and shades in for outdoor
floors such as footpath, court yard, multi modals location etc., laid
on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse
sand) in all shapes & patterns including grouting the joints with white
cement mixed with matching pigments etc. complete as per direction
of Engineer-in-Charge.
225.6
229301
1016.41
20 mm th.Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 fine sand), finished with a floating coat of neat cement.
-
-
-
in edging wall
22.56
10428
462.28
Toy Wall
-
-
-
EARTH WORK
-
-
-
Earth work in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead up to 30M and including filling watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trenches or in to the the plinth and removal and disposal of surplus earth as directed by the Engineer i/c with in a lead of 50m.
65.98
11992
181.75
PLAIN CEMENT CONCTRETE WORK
-
-
-
Providing and laying in cement concrete 1:4:8 (1 cement 4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
5.03
23925
4756.48
RIENFORCED CEMENT CONCTRETE WORK
-
-
-
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works.Binding wire cost being included in the item. M-20
-
-
-
As in item 3 above but for Lintel & plinth beam M20
5.6
35370
6316.2
As in item 3 but for the Foundation in M20
13.57
85710
6316.2
As in item 3 above but in R.C.C. columns in having strength not less than M 20
24.89
157210
6316.2
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
30.6
8378
273.82
Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
46.77
27495
587.89
Columns,Pillars, Piers, Abutments, Posts and Struts.
261.62
175606
671.23
Mild steel T M T Fe 500 or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shaoe as necessary including bending for proper completion of the work and including supply of steel. Its wastage bend, hookes and authorised averlapping shall be measured upto floor two level.
29.29
220572
7530.63
Boaring & Pipeline
-
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/
bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
-
-
-
400 mm dia
90
62264
691.83
Boring/drilling bore well of required dia for casing/ strainer pipe, by
suitable method prescribed in IS: 2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/
bore log, including hire & running charges of all equipments, tools,
plants & machineries required for the job, all complete as per direction
of Engineer -in-charge, beyond 90 metre & upto 150 metre depth
below ground level.
-
-
-
400 mm dia
15
12971
864.78
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
200 mm nominal size dia
60
46643
777.4
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
200 mm nominal size dia
30
26303
876.79
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
8.48
11984
1413.61
(0.785*0.4*0.4*90)-(0.785*0.2*0.2*90)=8.478 CUM
-
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
45
34093
757.64
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of : 200 mm dia
1
224
224.24
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp.
1
1601
1601.54
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia.
1
249
249.69
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal bore
80
42573
532.17
Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end)
1
716
716.86
Constructing masonry Chamber 60x60x75 cm inside, in brick workin cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameterand 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mmnominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cementcomplete as per standard design :
4
30338
7584.67
Supply of 100mm dia Johnson screen.
4
698
174.56
Supply of submersible pump of make KSB 2.5 HP with control panel, support wire etc. complete.
1
20947
20947.5
Supply and fixing of finolex of copper cable ISI marked submersible cable of size 4 sq mm
90
10997
122.19
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.
-
-
-
40 mm nominal outer dia Pipes
20
437
21.89
50 mm nominal outer dia Pipes
74.2
1942
26.17
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc.
-
-
-
External work
-
-
-
40 mm nominal outer dia Pipes
24
7600
316.68
50 mm nominal outer dia Pipes
74.2
29023
391.15
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).
-
-
-
40mm dia nominal bore
4
1295
323.99
50mm dia nominal bore
6
2536
422.79
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
40mm dia nominal bore
2
847
423.97
50mm dia nominal bore
1
526
526.89
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design.
-
-
-
600X600X750
3
16724
5574.73
Passanger Plateform
-
-
-
Earth work in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead up to 30M and including filling watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trenches or in to the the plinth and removal and disposal of surplus earth as directed by the Engineer i/c with in a lead of 50m.
-
-
-
in edging wall
69.95
12713
181.75
Fine Sand Filling in Plinth under floor including watering ,rammining , consolidating & dressing complete including lead upto 50m and lift upto 1.5M including cost of sand
-
-
-
in floor
116.59
172892
1482.91
Providing and laying in cement concrete 1:2:4 (1 cement :4coarse sand :4 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
-
-
-
Same as above but 1:4:8
-
-
-
in edging wall
-
-
-
in floor
69.95
332715
4756.48
Class 150 brick work in 1:4 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
-
-
-
in edging wall
-
-
-
FOR LOW LAND
116.59
600036
5146.56
20 mm th.Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3coarse sand), finished with a floating coat of neat cement.
-
-
-
in edging wall
77.73
27495
353.73
R.C.C. work in M-20
-
-
-
Plinth Beam
5.82
36760
6316.2
M. S. work in R.C.C.
-
-
-
Plinth Beam
5.82
43828
7530.63
Centering and shuttering
-
-
-
Plinth Beam
58.29
34268
587.89
Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS: 15622, of approved make, in all colours and shades,
laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),
jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the
joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 600x600 mm
777.31
843145
1084.7
Handpump
-
-
-
India marks-II hand ISI market with Cylinder & Conection road complete
1
7125
7125
Supply of 110mm dia plain PVC (6 kg/sqcm) Pressure
27
7695
285
Supply of 63mm dia plain PVC (6 kg/sqcm) Pressure
16
4560
285
50mm dia PVC strainer 4mt Long ridded with stander trap & Spaciales
1
475
475
Supply of PVC Soket 110m dia
5
332
66.5
Nylon mesh narial rope around stariner
1
285
285
Supply of medium class GI pipe 32mm B class
27
5258
194.75
Providing necessary boaring T&P including making arrangement of water for boaring 200mm dia bore hole by Rig machine in all type of starta complete item
-
-
-
30 metre B.G.L
30
3562
118.75
Beyond 30 metre
17
2261
133
Supply of labour T&P and jointing & lowering of PVC pipe consisting of 110mm & 50 mm dia bore long ribbed PVC Strainer & Cavity complete
-
-
-
30 metre B.G.L
30
171
5.7
Beyond 30 metre
17
113
6.65
Supply of labour T &P and jointing & lowering of PVC pipe consisting of 110mm & 50mm dia bore ribbed PVC strainer & cavity complete
1
570
570
Development of bore by manual labour till discharge is free from turbity complete item
1
950
950
Supply & using of PVC cemnt solvent
1
190
190
Supply of all material labour T & P required for proper completion of work to construct cement concrete (1:2:4) platform of 1.50 mt dia for hand pump as per drawing with P.C.C (1:5:10)
1
6650
6650
Supply of steel wire rope
24
684
28.5
Installation of India Marka-II hand pump over the bore hole as per direction of E/I and Installtion
1
6935
6935
Urinal
-
-
-
Earth work in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead up to 30M and including filling watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trenches or in to the the plinth and removal and disposal of surplus earth as directed by the Engineer i/c with in a lead of 50m.
-
-
-
FT1
7.72
1403
181.75
Fine Sand Filling in Plinth under floor including watering ,rammining , consolidating & dressing complete including lead upto 50m and lift upto 1.5M including cost of sand
-
-
-
urinal
0.92
1364
1482.91
Providing and laying in cement concrete 1:4:8 (1 cement :4coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
-
-
-
Same as above but 1:4:8
-
-
-
urinal
-
-
-
FT1
1.89
8989
4756.48
Class 150 brick work in 1:6 (one cement and three coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
-
-
-
outer wall
6.03
30049
4980.09
Same as in item No. 4 above but in super-structure above plinth level including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:3 cement : coarse sand).
-
-
-
urinal (3.805-0.30)
2.5
15895
6358.23
Same as in item No. 4.above but in super-structure above plinth level including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:3 cement : coarse sand).
-
-
-
urinal
1.23
8025
6524.69
15 mm cement plaster on rough side of single or half brick wall of
mix:
-
-
-
1:4 (1 cement: 4 coarse sand)
-
-
-
plate form
-
-
-
in side
12.55
3608
287.5
S/F 6 mm thick china white glazed tiles inflooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing materials labour and tools & plants etc. required for proper completion of the work.
-
-
-
plateform
-
-
-
in side
-
-
-
partion
24.51
18762
765.67
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
-
40 mm thick with 20 mm nominal size stone aggregate
1.4
627
447.72
20 mm th.Cement plaster skirting up to 30 cm height, with cement mortar 1:2 (1
cement : 2 coarse sand), finished with a floating coat of neat cement.
-
-
-
urinal
2.19
1010
462.28
Finishing walls with water-proofing on cement paint of approved make such as super supercem quality and of required shadesnowcem,durrocem,robiacem,guttucem on undecorated wall surfaces (two coat)overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials.
-
-
-
in side
3.45
412
119.47
R.C.C. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:6, (1cement :6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works strength of the concrete shall not beless than M-200.
-
-
-
R.C.C Work in foundation
-
-
-
urinal
2.57
16257
6316.2
R.C.C Work in column
1.01
6379
6316.2
R.C.C Work in beam
0.95
6006
6316.2
Mild Steel or iron in TMT Fe 415 work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
5.34
40213
7530.63
Providing and fixing on wall face unplasticised Rigid PVC rain water
pipes conforming to IS : 13592 Type A, including jointing with seal
ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
-
-
-
plate form
10
2635
263.52
Water Post
-
-
-
Earth work in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead up to 30M and including filling watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trenches or in to the the plinth and removal and disposal of surplus earth as directed by the Engineer i/c with in a lead of 50m.
9.9
1799
181.75
Fine Sand Filling in Plinth under floor including watering ,rammining , consolidating & dressing complete including lead upto 50m and lift upto 1.5M including cost of sand
0.65
966
1482.91
Providing and laying in cement concrete 1:4:8 (1 cement :4coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
-
-
-
Same as above but 1:4:8
1.51
7182
4756.48
Class 150 brick work in 1:6 (one cement and three coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
2.9
14437
4980.09
Same as in item No. 4 above but in super-structure above plinth level including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:3 cement : coarse sand).
0.57
3592
6358.23
Same as in item No. 4.above but in super-structure above plinth level including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:4 cement : coarse sand).
0.06
417
6524.69
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
-
-
-
water post
9.88
35433
3586.42
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).
-
-
-
15mm dia nominal bore
5
1279
255.84
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).
-
-
-
15mm dia nominal bore
1
222
222.29
25mm dia nominal bore
1
306
306.71
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
-
-
-
a) 15 mm nominal bore
4
1415
353.87
R.C.C. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:6, (1cement :6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works strength of the concrete shall not beless than M-200.
-
-
-
R.C.C Work in foundation
-
-
-
urinal
-
-
-
7070+9430-8610
2.57
16257
6316.2
R.C.C Work in column
-
-
-
urinal
0.59
3713
6316.2
R.C.C Work in beam
-
-
-
urinal
0.82
5172
6316.2
Mild Steel or iron in TMT Fe 415 work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
4.69
35296
7530.63
Supply of 110 mm dia PVC casing pipe for boring 6 kg/sqmcm
3
775
258.35
Toilet Block
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
all kinds of soil
34.8
6325
181.75
Supplying and stacking of good earth at site.
40.72
22049
541.49
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
75.52
36938
489.12
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
5.43
8052
1482.91
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
8.46
40239
4756.48
Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
-
-
Upto plinth level
-
-
-
(i) R.C.C. work in Footing
8.38
52929
6316.2
(ii) R.C.C. work in Beam
5.39
34044
6316.2
(iii) R.C.C. work in Columns
1.34
8463
6316.2
Above plinth to floor-V lvl
-
-
-
Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
-
-
(iii) R.C.C. work in Columns
2.07
15686
7578.07
(i) R.C.C. work in Lintel
0.53
4016
7578.07
(ii) R.C.C. work in Beam
3.22
24401
7578.07
(iv) R.C.C. work in Slab
7.64
57896
7578.07
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
22.95
172827
7530.63
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos E.C. 20% with 1% concentration
45.88
9932
216.49
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
7.98
2185
273.82
Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
78.49
46143
587.89
Columns,Pillars, Piers, Abutments, Posts and Struts.
31.08
20861
671.23
Edges of slabs and breaks in floors and walls Under 20 cm wide.
53.23
7751
145.62
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
14.09
70149
4980.09
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
8.04
2306
286.88
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
8.04
820
102.05
Brick Work with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 ( 1 cement : 6 coarse sand)
19.19
122014
6358.23
Brick Work with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 ( 1 cement : 4 coarse sand)
3.39
22118
6524.69
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
-
-
-
Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge.
-
-
-
Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
-
-
-
The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
50.24
59099
1176.27
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
-
-
-
(a) Single leaf
12.18
29544
2425.62
(b) Double leaf
-
-
-
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.
-
-
-
Fabrication of hold fast for door, chaukhats and windows.
34.8
2851
81.94
Providing & fixing of door / windows grill.
56.7
8674
152.99
Angle iron chaukhat (40x40x5)
123
12169
98.94
Fixing of Door, windows / ventilators chaukhats in position.
-
-
-
(a) Door chaukhats
7
537
76.81
(b) Window chaukhats
-
-
-
(c) Ventilator chaukhats
8
335
41.9
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
3.15
2341
743.39
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
68.87
3770
54.74
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)
180.92
49943
276.05
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. 1:6 (1 cement: 6 coarse sand)
107.08
25694
239.95
6 mm cement plaster on celling (a) 1:3(1 cement:3 fine sand)
39.35
8255
209.79
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
16
8371
523.2
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate) finished with a floating coat of neat cement, includingcement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate
24.4
10923
447.72
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red
10.56
37872
3586.42
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red
4.01
14392
3586.42
Supply and fixing 6 mm China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm).
134.19
102744
765.67
Steel Painting:Applying priming coat:
-
-
-
(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
15.33
2421
157.98
Steel Painting:Applying priming coat:
-
-
-
(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
24.36
3848
157.98
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats Internal wall surface)
220.27
24870
112.91
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
107.08
12792
119.47
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
327.35
35668
108.96
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete. (a) 250mm x 16mm.
14
2547
181.96
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
-
-
-
300 x 10mm
14
1271
90.84
200 x 10mm
14
974
69.62
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (a) 125 mm.
14
647
46.26
Toilet Plumbing
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
-
-
-
W.C. pan with ISI marked white plastic seat and lid
3
13648
4549.48
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required.
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests
2
9450
4725.34
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
-
-
-
Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern
2
25149
12574.61
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.
5
6560
1312.15
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required
-
-
-
Kitchen sink with drain board
-
-
-
510x1040x200mm
-
-
-
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
a) 32mm dia
5
362
72.55
b) 40mm dia
5
407
81.49
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
5
5613
1122.75
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms.
5
587
117.55
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.
3
1485
495.02
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.
-
-
-
110mm diameter
25
6588
263.52
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
6
1249
208.25
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110mm
24
6222
259.26
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
6
229
38.19
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.
-
-
-
(internal work)
-
-
-
Exposed on wall
-
-
-
32mm dia nominal bore
15
6986
465.73
Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality.
-
-
-
32mm dia nominal bore.
15
232
15.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
internal work -Exposed on wall
-
-
-
20mm dia nominal outer dia pipes
25
5847
233.91
25mm dia nominal outer dia pipes
15
4205
280.38
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work including cutting chases and making good the walls etc.
-
-
-
15mm dia nominal outer dia pipes
25
8689
347.59
20mm dia nominal outer dia pipes
15
5630
375.38
25mm dia nominal outer dia pipes
20
8763
438.19
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.
-
-
-
15mm nominal bore
2
136
68.25
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
-
-
-
15mm nominal bore
4
1415
353.87
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15mm nominal bore
4
2231
557.87
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
-
-
-
15mm nominal bore
2
802
401.01
Providing & fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
4
208
52.23
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
25mm dia nominal bore
2
869
434.59
20 mm dia nominal bore
2
754
377.02
32mm dia nominal bore
2
963
481.51
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
-
-
-
25 mm nominal bore
4
1296
324.02
Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
23043
7.68
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
25
6147
245.89
Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
100mm diameter
10
3097
309.74
150mm diameter
15
7287
485.84
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
100mm diameter S.W. Pipe
10
6736
673.64
150mm diameter S.W. Pipe
15
12357
823.83
Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design:
-
-
-
150 x 100 mm. size P type
-
-
-
With Sewer bricks conforming to IS : 4885
4
7573
1893.45
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design
-
-
-
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
-
-
-
With FPS bricks of class designation 75
-
-
-
(i) For Sewer Line
2
17834
8917.04
Extra for depth of man hole size 90x80 cm
3
18487
6162.34
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design
-
-
-
With 20x20 mm square bar
10
3803
380.34
Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before but excluding supply and cost of other fIttlings such as elbow,bend,tee and y-tee including supply of al marerial labour and T&P.Required for proper completion of work.
-
-
-
75 mm O.D.
25
5935
237.41
110 mm O.D.
15
4713
314.21
Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.
4
2541
635.41
Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735.
-
-
-
Size 75 mm
4
418
104.74
Size 110 mm
1
143
143.14
Supply and fixing of UPVC S.W.R. plain tee confirming to IS-14735.
-
-
-
Size 75x75x75 mm
2
240
120.1
Size 110x110x110 mm
1
185
185.04
Toilet Electrification
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
Group C
12
12292
1024.33
Wiring for circuit/sub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2X1.5 sqmm + 1x1.5 sqmm earth wire
25
4067
162.69
2X2.5 sqmm + 1x 2.5 sqmm earth wire
15
2880
192.02
2X4.0 sqmm + 1x 4.0 sqmm earth wire
15
3498
233.22
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required:
-
-
-
20mm
55
4915
89.38
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
-
-
-
TV antenna socket outlet
12
1240
103.34
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
4
111
27.93
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 module(75mm X 75 mm )
4
832
208.08
Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lamps per fitting, complete with all accessories including connection etc. as required.
12
997
83.09
Installation, testing and commissioning of prewired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as required.
4
575
143.84
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
7
278
39.8
Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required.
-
-
-
upto 450 mm sweep.
3
942
314.21
Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.
3
433
144.54
Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, `C` curve including connections, painting etc. as required.
1
507
507.63
Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 V on surface /recess complete with , tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators).
-
-
-
12 way, Double door
1
1616
1616.45
Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single Pole
2
357
178.75
Double Pole
1
458
458.05
Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required.
1
9
9.08
Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required.
1
5217
5217.32
Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
15
1508
100.55
Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required.
10
356
35.61
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
Upto 35 sq. mm
10
2702
270.22
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2 X 10 sqmm. (19mm)
2
336
168.28
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required.
-
-
-
50 mm Dia(Rate taken From Civil DSR 2021-18.12)
10
4567
456.8
PART B - NON - SCHEDULED ITEMS (AS PER MARKET RATES)
-
-
-
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554.
-
-
-
10 sqmm 2 core
10
2038
203.89
Supply and erection of 1X10 W mirror light complete in all respects
5
3665
733.16
Supply & fixing of 7/9 W LED BULB complete in all respect.
5
523
104.74
Supply and fixing of LED Tube Light with batten suitable for up to 1X20 watt LED tube light complete including tube etc. on surface complete in all respect.
4
977
244.39
Supply of AC 230/250 Volts, 50 Hz 55w 1400 rpm exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required.-Make: Havells-STANDARD -Refresh Air-SPS
-
-
-
300mm sweep.
3
4713
1571.06
Septic Tank
-
-
-
SIZE OF TANK-Length = 5.7 M. Width =2.1 M Total Depth =3.00M
-
-
-
Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed.
-
-
-
In all kind of soil upto 1.5m depth
32.28
4000
123.94
In all kind of soil upto 1.5m to 3.0m. depth
29.99
6371
212.48
In all kind of soil upto 3.0m to 4.50m. depth
8
2407
301.02
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 20 mm nominal size)
3.26
17950
5501.16
Reinforced cement concrete work in slab with 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20mm normal size).
2.63
21120
8033.72
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
15.64
80492
5146.56
Reinforcement for R.C.C. work including, straightening, cutting bending binding and placing in position complete.
-
-
-
qty same as ITEM NO.-3
394.41
29495
74.78
Centring and shuttering including struting , proping etc and removal of form for slab.
3.83
2479
647.45
15mm cement plaster on rough side of mix 1:4 (1 cement : 4 course sand)
66.19
19029
287.5
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4( 1 cement: 2 coarse sand: 4 gradeed stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2( 1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
11.97
8827
737.46
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
18
6846
380.34
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
4
1734
433.61
Providing & fixing 75mm dia vent pipes.
4
2917
729.5
Providing & fixing of 75mm dia cast iron terminal guard.
2
475
237.89
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
M.D. -10- Circular shape 500mm internal diameter
4
3275
818.77
L.D. -2.5- Circular shape 450mm internal diameter
4
3266
816.71
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.
-
-
-
With F.P.S. bricks
1
18756
18756.32
RCC Drain (300*450mm)
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
all kinds of soil
51.13
9293
181.75
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
7.52
35768
4756.48
Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
-
-
Upto plinth level
-
-
-
(i) R.C.C. work in Footing
8.27
52234
6316.2
(ii) R.C.C. work in Wall
8.27
52234
6316.2
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
16.54
124556
7530.63
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete.
34.59
9471
273.82
Columns,Pillars, Piers, Abutments, Posts and Struts.
27.07
18170
671.23
External Water Supply
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
Pipes, cables etc. not exceeding 80mm dia.
150
22581
150.54
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc.
-
-
-
External work
-
-
-
25mm nominal bore.
50
16330
326.61
32mm nominal bore.
40
15090
377.26
50mm nominal bore.
60
31930
532.17
80mm nominal bore.
75
54552
727.37
Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work.
-
-
-
25 mm diameter pipe
50
5610
112.21
32 mm diameter pipe
40
4605
115.14
50 mm diameter pipe
60
7258
120.97
80 mm diameter pipe
75
14757
196.77
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.
-
-
-
25 mm nominal bore
2
869
434.59
32 mm nominal bore
2
963
481.51
50 mm nominal bore
1
716
716.86
80 mm nominal bore
2
3637
1818.63
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
-
-
-
With F.P.S. bricks
15
113770
7584.67
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm dia nominal bore
8
5090
636.32
50 to 80 mm dia nominal bore
5
6233
1246.62
RCC Slab on Nala
-
-
-
Above plinth to floor-V lvl
-
-
-
Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
-
-
-
(iv) R.C.C. work in Slab
13.95
105714
7578.07
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
10.95
82460
7530.63
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide.
93
13542
145.62
EXT. SEWERAGE SYSTEM
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
150
50181
334.54
Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
150mm diameter
150
99151
661.01
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
150mm diameter S.W. Pipe
150
168128
1120.86
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design
-
-
-
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
-
-
-
With FPS bricks of class designation 75
-
-
-
(i) For Sewer Line
15
181980
12132.02
Extra for depth of man hole size 90x80 cm
0.75
6288
8384.13
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.
12
6312
526.02
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
For pipes 100 to 250mm diameter
45
34646
769.93
GST Extra As per Applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements