Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 Nov 2024
Closing Soon29 Nov 2024
Tender Amount₹ 1,68,61,000
Costs
EMD
₹ 3,37,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPPRC_974823_1Tender No
23/GM-3/UPPCL/2024-25 DATED 13.11.2024Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete
25.91
1482
38422.15
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
27.25
4756
129614.05
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
30.86
6636
204808.32
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting
of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix
or bear the cost of extra cement.
-
-
-
All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum
46.4
6885
319465.11
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
34.81
273
9531.64
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
-
-
-
Suspended floors, roofs, landings, balconies and access platform
190.55
647
123371.98
Lintels, beams, plinth beams, girders, bressumers and cantilevers
237.32
514
122027.81
Columns, Pillars, Piers, Abutments, Posts and Struts
96.96
671
65082.27
Stairs, (excluding landings) except spiral-staircases
-
-
-
Extra for shuttering in circular work (20% of respective centering and shuttering items)
-
-
-
Columns
-
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide
114.16
145
16623.98
Add for using extra cement in the items of design mix over and above the specified cement content therein.
7.73
512
3959.04
Class-150 brick work in 1:6 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work.
18.45
4980
91882.73
Class-150 brick work in 1:6 cement and COARSE sand mortar in SUPER STRUCTURE including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work
34.71
6358
220694.16
Class-150 reinforced HALF brick work in 1:4 cement and COARSE sand mortar in SUPERSTRUCTURE including supply of all materials, labour tools and plants, etc.
18.43
784
14461.89
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
160.26
73
11727.42
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measured as per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:- (1) treatment for masonary & foundation 5 litres per sq.m. (2) back fill in immediate contract with foundation 7.5 litre per sq.m (3)treatment of top surface of plinth filling 5 liters per sq.m. (4) treatment of soil along external parameter of building 7.50 lire per sq.m.
152.04
216
32915.44
Thermo-Mechanically Treated bars work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of work and including supply of all steel and wastage & over lapping and hooks.
82.38
7530
620372.97
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :. 250x16 mm
7
181
1273.75
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
300x10 mm
14
90
1271.79
200x10 mm
34
69
2366.94
Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125mm
48
46
2220.43
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper
6
50
303.11
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
7
686
4805.39
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded
profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.
-
-
-
Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.
-
-
-
Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed 45 m/sec as per IS 875 – Part 3
(ii) Sites with structure height more than 20m for all wind speeds
-
-
-
Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.
-
-
-
Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre).
20.16
7676
154753.12
Providing and fixing glazing in aluminium door, window, ventilator etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.00 mm thickness shutters and partitions etc. with EPDM rubber / neoprene gasket.
20.16
1051
21188.99
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.With 12 mm mild steel U beading.
20.16
857
17286.21
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
194.4
136
26496.33
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6 mm for diagonal braces
-
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
13.23
2425
32090.9
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
13.23
322
4271.12
Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 100 mm
4.95
775
3841.03
Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick
1.58
3035
4795.43
Providing and fixing stainless steel (Grade 304) railing made of hallow tubes, chanells, plates etc. including welding grinding buffing, polising and making corvechare (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge.(for payment purpose only weight of stainless steel members shall be considered excluding fixing assessories such as nuts, bolts, fasteners etc.
49.6
539
26750.67
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
-
-
-
Providing and fixing ball bearing for rolling shutters
-
-
-
Providing and laying "brick coba" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.
152.04
1176
178840.4
12 mm cement plaster on smooth side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)
212.67
239
51031.02
15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)
164.35
276
45369.31
6 mm cement plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80 mm in girth and finished evenand smooth no. extra for mixing and additive. (i) 1 cement: 3 course sand in ceiling.
-
-
-
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) In plinth.
23.83
287
6851.22
Making grooves 10 to 12 mm wide x 8 mm deep in plaster the all or in ceiling vertically of horizontally as required.
228.32
54
12498.92
Add for plaster drip course in plastered surface or moulding to R.C.C. projections.
24.84
54
1359.82
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
2.4
928
2228.82
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
44.43
885
39335.92
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
49.41
1084
53597
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
155.93
3129
487915.57
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge
108.76
356
38802.41
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red. Area of slab over 0.50 sqm
10.25
3586
36760.82
Providing and laying tactile tile (PAVIT TILES) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
5.95
1408
8382.3
Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.“ 8 mm thick Granite in any colour and shade.
48.3
2525
122003.58
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick
134.03
64
8586.5
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
400.81
129
51957
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
198.11
119
23668.4
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
598.92
108
65259.52
Painting two coats over priming coat on steel & other metal surface upto 10 cm width or grith or small articles not exceeding 0.10 sqmt. In areas with superior synthetic enamel such as Luxol 3Hi gloss aqcolite superlac. Dulux specified finishing
13.23
119
1576.9
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
47.66
523
24935.66
Brick edging 7cm wide 11.4cm. deep to plinth protection with bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)
52.96
41
2198.42
Providing Apron Drain with brick work in cement mortar in proportion 1:6 with half brick thick side and 100mm thick C.C. (1:4:8) base over 25 mm thick C.C. (1:2:4) including 15 mm thick cement plastering in prop. 1:4 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of the work etc. as specified. 250 mm wide and average 250mm deep.
-
-
-
Supply & Filling of Cinder in sunken portion of building including breaking into required sizes including supply of all material, labour, T&P required sizes including supply of all material, labour, T&P required for proper completion of work.
-
-
-
P / F 100 mm dia Rain water pipe clips of approved design to C.I. rain water pipes by means of 50 x 50 x 50mm hard m.s. plugs, screwed with M. S. screws of required length including cuitting brick work and fixing in cement mortor 1 : 4 (1cement : 4 coarse sand. )
35.2
804
28311.85
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. For 100 mm dia pipe
12
253
3040.32
Providing lead caulked joints to sand cast iron rain water pipes and fittings: 100 mm dia Pipe
16
405
6485.34
Providing and fixing plain bend of required degree. For 100 mm dia pipe.
8
417
3343.22
Providing and fixing heel rest sanitary bend. For 100 mm dia pipe.
8
407
3263.62
Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal size diameter
8
26
210.03
TERRACE WATER TANK 20 KL
-
-
-
Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.
151
123
18714.79
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting
of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix
or bear the cost of extra cement.
-
-
-
All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum
11.87
6885
81725.24
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
36.96
588
21742.68
Suspended floors, roofs, landings, balconies and access platform
24.5
647
15862.57
Lintels, beams, plinth beams, girders, bressumers and cantilevers
25.32
514
13019.32
Columns, Pillars, Piers, Abutments, Posts and Struts
18.24
671
12243.2
Stairs, (excluding landings) except spiral-staircases
-
-
-
Extra for shuttering in circular work (20% of respective centering and shuttering items)
-
-
-
Columns
-
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide
-
-
-
Thermo-Mechanically Treated bars work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of work and including supply of all steel and wastage & over lapping and hooks.
16.6
7530
125008.39
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
For vertical surface two coats @ 0.70 kg per sqm
55.2
330
18227.15
For horizontal surface one coat @1.10 kg per sqm.
49.82
253
12620.65
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm).
23.1
81
1885.54
INTERNAL W/S AND SANITATION
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
1
4549
4549.48
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern
-
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
2
1312
2624.3
Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.
-
-
-
510x1040 mm bowl depth 250 mm
1
4849
4849.77
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
1
243
243.79
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
3
722
2167.65
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 453x357 mm
2
950
1901.75
Providing and fixing toilet paper holder :
-
-
-
c.p brass
1
561
561.18
Providing and fixing soil, waste and vent pipes :
-
-
-
100 mm dia
-
-
-
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
85
824
70079.02
Providing and fixing soil, waste and vent pipes :
-
-
-
75 mm diameter :
-
-
-
Centrifugally cast (spun) iron socketed pipe as per IS: 3989
43
828
35609.38
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
-
-
-
For 100 mm dia pipe
57
253
14441.52
For 75 mm dia pipe
29
251
7289.73
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100 mm dia
-
-
-
Sand cast iron S&S as per IS - 3989
29
492
14279.77
75 mm dia
-
-
-
Sand cast iron S&S as per IS- 3989
15
365
5475.68
Providing and fixing heel rest sanitary bend
-
-
-
100 mm dia
-
-
-
Sand cast iron S&S as per IS - 3989
10
383
3831.3
Providing and fixing double equal plain junction of required degree
-
-
-
100x100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 3989
29
750
21768.97
Providing and fixing double equal plain junction of required degree
-
-
-
75x75x75x75 mm
-
-
-
Sand cast iron S&S as per IS - 3989
15
560
8410.95
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter
-
-
-
100 mm
68
434
29556.95
75mm
30
367
11023.62
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Sand cast iron S&S as per IS: 3989
3
1394
4182.17
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
-
-
-
100 mm diameter pipe
85
57
4914.28
75 mm diameter pipe
43
43
1890.07
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
2
117
235.1
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
150 mm diameter
-
-
-
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
-
-
-
(a) 15 mm nominal dia
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
20mm nominal dia Pipes
75
233
17543.55
25mm nominal dia Pipes
50
280
14019.1
32mm nominal dia Pipes
25
362
9055.43
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
15 mm nominal dia Pipes
80
347
27807.12
20 mm nominal dia Pipes
31
375
11636.75
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore
1
434
434.59
20 mm nominal bore
1
377
377.02
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length
-
-
-
20 mm nominal bore
4
83
332.51
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
2000
7
15362
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
2
353
707.75
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15mm nominal bore
4
401
1604.02
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
-
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
30
263
7905.6
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
110 mm
10
95
950.67
Shoe (Plain)
-
-
-
110 mm Shoe
4
92
368.26
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
20
259
5185.2
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
150 mm dia. R.C.C. pipe
70
388
27197.87
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
4
8917
35668.15
Extra for depth for manholes :
-
-
-
Size 90x80 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
100x100 mm size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
1890
5671.85
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
Ordinary rock :
-
-
-
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
70
697
48811.49
INTERNAL ELECTRIFICATION WORK
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
-
-
-
Group B
-
-
-
Group C
50
1069
53480.05
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
2
1138
2277.73
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X2.5 sq. mm + 1X2.5 sq. mm earth wire
185
200
37093.43
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
75
243
18264.15
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
55
320
17604.29
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
-
-
-
2 X 16 sq. mm + 1 X 6 sq. mm earth wire
40
562
22514.84
4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
-
-
-
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
-
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
-
-
-
4 X 10 sq. mm + 2X6 sq. mm earth wire
40
732
29310.12
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
40
995
39809.28
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
1 Pair
-
-
-
2 Pair
50
27
1385.3
4 Pair
-
-
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
75
34
2570.1
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
55
93
5132.93
25 mm
45
105
4757.45
32 mm
70
134
9390.92
40 mm
-
-
-
50 mm
-
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
15
75
1126.47
2 way 5/6 A switch
-
-
-
15/16 A switch
10
113
1137.41
3 pin 5/6 A socket outlet
15
88
1334.27
6 pin 15/16 A socket outlet
10
143
1436.34
Telephone socket outlet
2
107
215.82
TV antenna socket outlet
3
107
323.72
Bell push
1
102
102.08
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
9
269
2421.37
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
29
291.64
Supplying and fixing following size/ modules, Gl box along with modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75mmX75mm)
6
217
1303.64
3 Module (100mmX75mm)
7
238
1668.93
4 Module (125mmX75mm)
-
-
-
6 Module (200mmX75mm)
7
293
2051.71
8 Module (125mmX125mm)
1
331
331.02
12 Module (200mmX150mm)
3
398
1196.47
Installation .Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing up to two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
27
86
2342.63
Supplying and fixing call bell/ buzzer suitable for single phase, V, complete as required.
2
72
144.36
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
-
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
6
201
1207.4
Supplying and fixing extra down rod of 10 cm length G.l. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
-
-
-
Supplying and fixing extra conduit down rod of 20 cm length G.l. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
-
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Up to 450 mm sweep
1
328
328.1
510 mm sweep
-
-
-
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
1
150
150.93
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
1 run of cable
45
41
1870.16
Supplying & fixing suitable size Gl box with modular plate and cover in fronton surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
2
530
1060.12
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
8
80
641.62
Sub-Head : MCCB, MCB & OB'S
-
-
-
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
100 A, 16 KA.TPMCCB
-
-
-
125 A, 16 KA.TPMCCB
-
-
-
150 A, 16 KA.TPMCCB
-
-
-
200 A, 16 KA,TPMCCB
-
-
-
200 A, 25 KA.TPMCCB
-
-
-
250 A, 25 KA.TPMCCB
-
-
-
250 A, 35 KA,TPMCCB
-
-
-
315 A, 35 KA.TPMCCB
-
-
-
400 A, 35 KA.TPMCCB
-
-
-
500 A, 35 KA.TPMCCB
-
-
-
630 A, 50 KA.TPMCCB
-
-
-
800 A, 50 KA.TPMCCB
-
-
-
100 A.30KA.FPMCCB
1
5630
5630.9
125 A.36KA.FPMCCB
-
-
-
200 A.36KA.FPMCCB
-
-
-
250 A.36KA.FPMCCB
-
-
-
250 A.50KA.FPMCCB
-
-
-
400 A.50KA.FPMCCB
-
-
-
630 A.5OKA.FPMCCB
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator)
-
-
-
6 way , Double door
-
-
-
8 way , Double door
-
-
-
12 way , Double door
1
1687
1687.88
16 way, Double door
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator)
-
-
-
4 way (4 + 12), Double door
-
-
-
6 way (4 + 18), Double door
-
-
-
8 way (4 + 24), Double door
1
4350
4350.59
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
4 way (4 + 12), Double door
1
5477
5477.06
8 way (4 + 24), Double door
-
-
-
12 way (4 + 36), Double door
-
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
15
186
2799.78
Single pole and neutral
-
-
-
Double pole
-
-
-
Triple pole
-
-
-
Triple pole and neutral
-
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
6
9
56.87
Supplying and fixing following rating, double pole, the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A
-
-
-
63 A
1
384
384.24
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A
-
-
-
63 A
1
753
753.9
100 A
-
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25 A
-
-
-
40 A
-
-
-
63 A
1
1984
1984.63
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25 A
-
-
-
40 A
-
-
-
63 A
1
2094
2094
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
-
-
-
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
-
-
-
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
-
-
-
Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
-
-
-
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
-
-
-
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
196
196.13
Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
-
-
-
Sub-Head : RISING MAINS & BUS TRUNKING
-
-
-
Supplying, installing on wall, testing and commissioning of following capacity Air Insulated Compact Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints & expansion joints, fire barrier at each floor, provision of tapping at every metre, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.l. clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required.
-
-
-
200 A, Isc = 15kA for 1 second
-
-
-
315 A, Isc = 25kA for 1 second
-
-
-
400 A, Isc = 30kA for 1 second
-
-
-
500 A, Isc = 35kA for 1 second
-
-
-
630 A, Isc = 50kA for 1 second
-
-
-
800 A, Isc = 50kA for 1 second
-
-
-
1000 A, Isc = 50kA for 1 second
-
-
-
1250 A, Isc = 50kA for 1 second
-
-
-
Supplying, installation, testing & commissioning of following capacity End Feed Unit for the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 5OHz A.C. supply made with 1.6mm thick steel sheet enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required
-
-
-
200 A, lsc= 15kA for 1 sec
-
-
-
315 A, lsc= 25kA for 1 sec
-
-
-
400 A, lsc= 30kA for 1 sec
-
-
-
500 A, lsc= 35kA for 1 sec
-
-
-
630 A, lsc= 50kA for 1 sec
-
-
-
800 A, lsc= 50 kA for 1 sec
-
-
-
1000 A, Isc= 50kA for 1 sec
-
-
-
1250 A, Isc= 50kA for 1 sec
-
-
-
Supplying, installation, testing & commissioning of following capacity Plug In/ tap off box on the existing Air Insulated Compact Type bus trunking/ rising mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick sheet steel enclosure (IP54) duly powder coated with provision of MCCB/ACB (but without MCCB/ACB) complete etc. as required
-
-
-
125 A, lsc= 15kA for 1 sec
-
-
-
200 A, lsc= 25kA for 1 sec
-
-
-
250 A, lsc= 30kA for 1 sec
-
-
-
400 A, lsc= 35kA for 1 sec
-
-
-
500 A, lsc= 50kA for 1 sec
-
-
-
630 A, lsc= 50kA for 1 sec
-
-
-
Sub-Head : CABLE TRAYS
-
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.l. suspenders including G.l. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
-
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
-
-
-
225 mm width X 50 mm depth X 1.6 mm thickness
-
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
-
-
-
375 mm width X 50 mm depth X 2.0 mm thickness
-
-
-
450 mm width X 50 mm depth X 2.0 mm thickness
-
-
-
600 mm width X 50 mm depth X 2.0 mm thickness
-
-
-
300 mm width X 62.5 mm depth X 2.0 mm thickness
-
-
-
375 mm width X 62.5 mm depth X 2.0 mm thickness
-
-
-
450 mm width X 62.5 mm depth X 2.0 mm thickness
-
-
-
600 mm width X 62.5 mm depth X 2.0 mm thickness
-
-
-
750 mm width X 62.5 mm depth X 2.0 mm thickness
-
-
-
900 mm width X 62.5 mm depth X 2.0 mm thickness
-
-
-
600 mm width X 75 mm depth X 2.0 mm thickness
-
-
-
750 mm width X 75 mm depth X 2.0 mm thickness
-
-
-
900 mm width X 75 mm depth X 2.0 mm thickness
-
-
-
Sub-Head : EARTHING
-
-
-
Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
-
-
-
Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1
5447
5447.89
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
-
-
-
Supplying and laying 6 SWG G.l. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with Gl thimble etc. as required.
8
37
297.47
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
-
-
-
Supplying and laying 25 mm X 5 mm G.l. strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.l. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.l. nut bolt & spring washer spaced at 50mm)
8
104
839.94
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
-
-
-
Providing and fixing 25 mm X 5 mm G.l. strip on surface or in recess for connections etc. as required.
8
177
1423.22
Providing and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing as required.
8
51
408.3
Sub-Head : LIGHTNING CONDUCTOR
-
-
-
Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.
-
-
-
Jointing copper / G.l. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
-
-
-
Fixing of copper/ G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
-
-
-
Fixing of copper/ G.l. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
-
-
-
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.l. strip, 125 mm long, with 4 nos. of G.l. bolts, nuts, chuck nuts and spring washers etc. complete as required.
-
-
-
Laying copper/ G.l. tape 32 mm X 6 mm from earth electrode directly in ground as required.
-
-
-
Sub-Head : MV CABLE LAYING
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Up to 35 sq. mm
50
282
14108.25
Above 35 sq. mm and up to 95 sq. mm
70
295
20670.23
Above 95 sq. mm and up to 185 sq. mm
-
-
-
Above 185 sq. mm and up to 400 sq. mm
-
-
-
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Up to 35 sq. mm
-
-
-
Above 35 sq. mm and up to 95 sq. mm
-
-
-
Above 95 sq. mm and up to 185 sq. mm
-
-
-
Above 185 sq. mm and up to 400 sq. mm
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
-
-
-
Up to 35 sq. mm
-
-
-
Above 35 sq. mm and up to 95 sq. mm
-
-
-
Above 95 sq. mm and up to 185 sq. mm
-
-
-
Above 185 sq. mm and up to 400 sq. mm
-
-
-
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
-
-
-
Up to 35 sq. mm
-
-
-
Above 35 sq. mm and up to 95 sq. mm
-
-
-
Above 95 sq. mm and up to 185 sq. mm
-
-
-
Above 185 sq. mm and up to 400 sq. mm
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Up to 35 sq. mm
22
26
593.49
Above 35 sq. mm and up to 95 sq. mm
22
41
914.3
Above 95 sq. mm and up to 185 sq. mm
-
-
-
Above 185 sq. mm and up to 400 sq. mm
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
-
-
-
Up to 35 sq.mm
-
-
-
Above 35 sq. mm and up to 95 sq. mm
-
-
-
Above 95 sq. mm and up to 185 sq. mm
-
-
-
Above 185 sq. mm and up to 400 sq. mm
-
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
Up to 35 sq. mm (clamped with 1mm thick saddle)
110
40
4411.11
Above 35 sq. mm and up to 95 sq. mm (clamped with 25x3mm MS flat clamp)
25
94
2369.6
Above 95 sq. mm and up to 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
-
-
-
Above 185 sq. mm and up to 400 sq. mm (damped with 40x3mm MS flat clamp)
-
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Up to 35 sq. mm (clamped with 1mm thick saddle)
-
-
-
Above 35 sq. mm and up to 95 sq. mm (clamped with 25x3mm MS flat clamp)
-
-
-
Above 95 sq. mm and up to 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
-
-
-
Above 185 sq. mm and up to 400 sq. mm (clamped with 40x3mm MS flat clamp)
-
-
-
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
-
-
-
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.l. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
-
-
-
Sub-Head : MV CABLE JOINTING & END TERMINATION
-
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2 X 6 sq. mm (19mm)
-
-
-
2 X 10 sq. mm (19mm)
-
-
-
2 X 16 sq. mm (22mm)
-
-
-
2 X 25 sq. mm (22mm)
-
-
-
2 X 35 sq. mm (25mm)
-
-
-
2X50 sq. mm (28mm)
-
-
-
3 X 10 sq. mm (22mm)
-
-
-
3 X 16 sq. mm (25mm)
-
-
-
3 X 25 sq. mm (25mm)
-
-
-
3 X 35 sq. mm (28mm)
-
-
-
3 X 50 sq. mm (32mm)
-
-
-
3 X 70 sq. mm (35mm)
-
-
-
3 X 95 sq. mm (38mm)
-
-
-
3 X 120 sq. mm (45mm)
-
-
-
3 X 150 sq. mm (50mm)
-
-
-
3 X 185 sq. mm (57mm)
-
-
-
3 X 225 sq. mm (62mm)
-
-
-
3 X 240 sq. mm (62mm)
-
-
-
3 X 300 sq. mm (70mm)
-
-
-
3-1/2X 25 sq.mm
-
-
-
3-1/2 X 35 sq.mm
2
269
538.08
3-1/2 X50 sq.mm
-
-
-
3-1/2 X 70 sq.mm
2
341
682.44
3-1/2 X 95 sq.mm
-
-
-
3-1/2 X 120 sq. mm
-
-
-
3-1/2 X 150 sq. mm
-
-
-
3-1/2 X 185 sq. mm
-
-
-
3-1/2 X 225 sq. mm
-
-
-
3-1/2 X240 sq.mm
-
-
-
3-1/2 X300 sq.mm
-
-
-
3-1/2 X400 sq.mm
-
-
-
4 X 10 sq. mm (25mm)
-
-
-
4 X 16 sq. mm (28mm)
3
225
675.88
4 X 25 sq. mm (28mm)
-
-
-
4 X 35 sq. mm (32mm)
-
-
-
4 X 50 sq. mm (35mm)
-
-
-
Sub-Head : MISC. CIVIL ITEMS
-
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.(DSR Civil 2023 Item no. 10.18.)
6
154
924.41
Sub-Head : Ceiling Fan with BLDC Motor
-
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
-
-
-
Sub-Head : FACADE LIGHTING (DSR 2019-E/M,FAÇADE LIGHTING)
-
-
-
Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage.Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/Ethernet based control.The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement.Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270VAC, 50Hz with power factor0.9.Fixture shall be suitable to operate at an ambient temperature range of-10°C to +50°C and shall be IP65 and IK06 rated.Lifetime shall be atleast L70:50000 burning hours at 50°C.Luminaire shall be conforming to BIS(IS10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, waterproof connectors etc. as required.
-
-
-
600W/580W
-
-
-
300 W/ 280 W
-
-
-
250 W
-
-
-
140 W
-
-
-
130 W
-
-
-
110 W/115 W
-
-
-
90 W
-
-
-
75 W
-
-
-
55 W
-
-
-
45 W/40 W
-
-
-
30 W
-
-
-
Supply, Installation, Testing and Commissioning of LED RGB/RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage.Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control.The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement.Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to2 70 VAC,50Hz,powerfactor0.9.Fixture shall be suitable to operate at ambient temperature range of-10°C to +50°C and shall be IP65 and IK06 rated.Lifetime should be atleast L70:50000 burning hours at 50°C.Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weatherproof connection cables, waterproof connectors etc. as required.
-
-
-
80W
-
-
-
70W
-
-
-
60W
-
-
-
40W
-
-
-
25W
-
-
-
Sub-Head : Non-Schedule Items
-
-
-
Supply of AC 1400mm Sweep, 230/250 Volts, 50 Hz ceilling fan without regulator, standard down rod, blades etc. complete as required. (Standard - Plain Ceiling Fans)
-
-
-
Supply of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan without regulator, standard down rod, blades etc. complete as required. (Standard - Plain Ceiling Fans)
6
1716
10299.9
Supply & Fixing of 400mm sweep, wall mounted fan complete with double ball bearing, motor, blades, capacitor etc suitable for single phase 230 volts, 50 Hz., AC supply, complete as required.
-
-
-
Supply of AC 300mm Sweep, 230/250 Volts, 50 Hz exhaust fan (Heavy Duty) with blades,cover etc. complete as required.
-
-
-
Supply of AC 200mm Sweep, 230/250 Volts, 50 Hz exhaust fan (Light Duty) with blades,cover etc. complete as required
1
1159
1159
Supply of Factory made 12 to 20 Watt LED Bulb fitting,cool day light,(65000 K temp.) suitable for Batton/Angle holder including making connection.Complete in all respect.
5
135
679.25
Supply of recess mounting round 12 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.
CAT-AAA
-
-
-
Supply of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.
CAT-AAA
-
-
-
Supply of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.(4ft)
CAT- AAA
6
524
3146.4
Supply of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.
CAT-AAA
6
2602
15612.3
Supply of LED Tube Light with batten suitable for up to 1 X 10 watt LED tube light fitting including tube on Surface complete in all respect.(2ft)
CAT- AAA
1
370
370.5
Supply of water tight oblong 10 Watt LED bulk head luminaire having die cast housing with driver set confirming to IP 65 and above Protection.Complete in all respect.
2
1353
2707.5
Supply & Fixing of LAN socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
2
511
1022.2
Supply and fixing of Three phase multifunctional electronic energy meter 10 to 60 Amp. Capacity fitted in intergral box on wall complete in all respect.
2
8539
17079.1
Supply of aluminium conductor XLPE insulated armoured served sheathed cables 1100 Volts grade.
-
-
-
6 sq. mm 2 core
-
-
-
10 sq. mm 2 core
-
-
-
16 sq. mm 2 core
-
-
-
6 sq. mm 4 core
-
-
-
10 sq. mm 4 core
-
-
-
16 sq. mm 4 core
70
125
8778
25 sq. mm 3-1/2 core
-
-
-
35 sq. mm 3-1/2 core
100
176
17670
50 sq. mm 3-1/2 core
-
-
-
70 sq. mm 3-1/2 core
100
338
33820
FIRE FIGHTING WORKS
-
-
-
Supply and fixing of fire extinguisher, ABC Type (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket,along with supply of all materials and labour for proper completion of work.
-
-
-
4.0 kg. capacity
10
7467
74670
Supply and fixing of C02 type fire extinguisher (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
-
-
-
4.5 kg. capacity
10
11381
113810
EXTERNAL WATER SUPPLY WORKS
-
-
-
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
Ordinary rock :
-
-
-
Pipes, cables etc. not exceeding 80 mm dia
170
281
47872.68
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
50 mm nominal dia Pipe
170
554
94279.45
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
50 mm nominal bore
3
716
2150.57
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
3
1391
4174
EXTERNAL SEWER LINE
-
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
150 mm dia. R.C.C. pipe
200
388
77708.2
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
20
8917
178340.74
Extra for depth for manholes :
-
-
-
Size 90x80 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
100x100 mm size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
15
1890
28359.26
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
Ordinary rock :
-
-
-
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
200
697
139461.4
SEPTIC TANK & SOAK PIT (Details as per TS Estimate
1
171000
171000
TOILET BLOCK (SMALL)
-
-
-
Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.
34.03
123
4217.64
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil.
-
-
-
Excavating, supplying and filling of local earth (including royalty) by
mechanical transport upto a lead of 5km also including ramming and
watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
12.9
489
6309.7
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete
1.56
1482
2313.34
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
4.01
4756
19073.48
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum
5.76
6636
38227.35
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting
of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix
or bear the cost of extra cement.
-
-
-
All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum
3.2
6885
22032.08
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
12.6
273
3450.12
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
-
-
-
Suspended floors, roofs, landings, balconies and access platform
16.53
647
10702.38
Lintels, beams, plinth beams, girders, bressumers and cantilevers
23
514
11826.39
Columns, Pillars, Piers, Abutments, Posts and Struts
-
-
-
Stairs, (excluding landings) except spiral-staircases
-
-
-
Extra for shuttering in circular work (20% of respective centering and shuttering items)
-
-
-
Columns
-
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide
63.02
145
9176.97
Class-150 brick work in 1:6 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work.
10.69
4980
53237.21
Class-150 brick work in 1:6 cement and COARSE sand mortar in SUPER STRUCTURE including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work
-
-
-
G. F.
1.6
6358
10173.17
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
85.44
784
67044.17
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the coloumn pitswall tench basement excavation top surface if plinth filling junction of wall and floor along the external perimer of binding expansion joints,surrounding of pipes and conduits etc.complete(plinth area of the building at ground floor only shall be measured as per I.S.6313(Part ll 1981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used.The rate of application of chemical emulsion shall be as follows:- (1) treatment for masonary & foundation 5 litres per sq.m. (2) back fill in immediate contract with foundation 7.5 litre per sq.m (3)treatment of top surface of plinth filling 5 liters per sq.m. (4) treatment of soil along external parameter of building 7.50 lire per sq.m.
15.63
216
3383.77
Thermo-Mechanically Treated bars work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of work and including supply of all steel and wastage & over lapping and hooks.
7.33
7530
55199.49
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :. 250x16 mm
5
181
909.82
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
250x10 mm
20
80
1608.06
150x10 mm
-
-
-
Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125mm
20
46
925.18
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded
profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.
-
-
-
Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.
-
-
-
Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed 45 m/sec as per IS 875 – Part 3
(ii) Sites with structure height more than 20m for all wind speeds
-
-
-
Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.
-
-
-
Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre).
1.8
7676
13817.24
Providing and fixing glazing in aluminium door, window, ventilator etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.00 mm thickness shutters and partitions etc. with EPDM rubber / neoprene gasket.
1.8
1051
1891.87
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.With 12 mm mild steel U beading.
1.8
857
1543.41
Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 100 mm
25
775
19399.13
Providing and fixing factory made single extruded WPC (Wood
Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick
8.4
3035
25494.7
Providing and laying "brick coba" 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finfished smooth & top mashed false square 30 x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.
19.54
1176
22984.36
12 mm cement plaster on smooth side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)
100.03
239
24002.6
15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)
-
-
-
6 mm cement plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80 mm in girth and finished evenand smooth no. extra for mixing and additive. (i) 1 cement: 3 course sand in ceiling.
-
-
-
Making grooves 10 to 12 mm wide x 8 mm deep in plaster the all or in ceiling vertically of horizontally as required.
63.02
54
3449.9
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
15.63
928
14515.16
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
160.69
885
142266.25
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
-
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
82.19
119
9819.32
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
53.36
108
5814.21
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
17.61
523
9213.53
Brick edging 7cm wide 11.4cm. deep to plinth protection with bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)
19.57
41
812.37
Providing Apron Drain with brick work in cement mortar in proportion 1:6 with half brick thick side and 100mm thick C.C. (1:4:8) base over 25 mm thick C.C. (1:2:4) including 15 mm thick cement plastering in prop. 1:4 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of the work etc. as specified. 250 mm wide and average 250mm deep.
19.57
701
13726.48
P / F 100 mm dia Rain water pipe clips of approved design to C.I. rain water pipes by means of 50 x 50 x 50mm hard m.s. plugs, screwed with M. S. screws of required length including cuitting brick work and fixing in cement mortor 1 : 4 (1cement : 4 coarse sand. )
8.8
804
7077.96
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. For 100 mm dia pipe
3
253
760.08
Providing lead caulked joints to sand cast iron rain water pipes and fittings: 100 mm dia Pipe
7
405
2837.34
Providing and fixing plain bend of required degree. For 100 mm dia pipe.
2
417
835.81
Providing and fixing heel rest sanitary bend. For 100 mm dia pipe.
2
407
815.91
Providing and fixing PTMT grating of approved quality and colour.Circular type 100 mm nominal size diameter
2
26
52.51
WATER SUPPLY & SANITARY WORK
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
4725
9450.67
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
1
4549
4549.48
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern
-
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
3
1312
3936.45
Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.
-
-
-
510x1040 mm bowl depth 250 mm
-
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
1
243
243.79
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
3
722
2167.65
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 453x357 mm
3
950
2852.63
Providing and fixing toilet paper holder :
-
-
-
c.p brass
1
561
561.18
Providing and fixing soil, waste and vent pipes :
-
-
-
100 mm dia
-
-
-
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
15
824
12366.89
Providing and fixing soil, waste and vent pipes :
-
-
-
75 mm diameter :
-
-
-
Centrifugally cast (spun) iron socketed pipe as per IS: 3989
8
828
6625
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
-
-
-
For 100 mm dia pipe
10
253
2533.6
For 75 mm dia pipe
6
251
1508.22
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100 mm dia
-
-
-
Sand cast iron S&S as per IS - 3989
5
492
2462.03
75 mm dia
-
-
-
Sand cast iron S&S as per IS- 3989
3
365
1095.14
Providing and fixing heel rest sanitary bend
-
-
-
100 mm dia
-
-
-
Sand cast iron S&S as per IS - 3989
2
383
766.26
Providing and fixing double equal plain junction of required degree
-
-
-
100x100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 3989
5
750
3753.27
Providing and fixing double equal plain junction of required degree
-
-
-
75x75x75x75 mm
-
-
-
Sand cast iron S&S as per IS - 3989
3
560
1682.19
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter
-
-
-
100 mm
12
434
5215.93
75mm
6
367
2204.72
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Sand cast iron S&S as per IS: 3989
4
1394
5576.22
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
-
-
-
100 mm diameter pipe
15
57
867.23
75 mm diameter pipe
8
43
351.64
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
3
117
352.65
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
150 mm diameter
-
-
-
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
-
-
-
(a) 15 mm nominal dia
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
20mm nominal dia Pipes
15
233
3508.71
25mm nominal dia Pipes
10
280
2803.82
32mm nominal dia Pipes
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
15 mm nominal dia Pipes
20
347
6951.78
20 mm nominal dia Pipes
15
375
5630.69
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore
1
434
434.59
20 mm nominal bore
1
377
377.02
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length
-
-
-
20 mm nominal bore
7
83
581.89
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
7
3840.5
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
4
353
1415.49
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15mm nominal bore
7
401
2807.04
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
-
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
10
263
2635.2
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
110 mm
4
95
380.27
Shoe (Plain)
-
-
-
110 mm Shoe
4
92
368.26
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
7
259
1814.82
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
150 mm dia. R.C.C. pipe
10
388
3885.41
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
1
8917
8917.04
Extra for depth for manholes :
-
-
-
Size 90x80 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
100x100 mm size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
1890
1890.62
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
Ordinary rock :
-
-
-
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
1
697
697.31
Internal Electrification Work
-
-
-
Wiring for light point/fan point /exhaust fan point /call bell/Sodium point with 1.50 Sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required.
-
-
-
Group B
26
861
22406.93
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
3
347
1043.35
Wiring for light / power plug with 2 x 1.50 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 1.50 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.
20
169
3397.64
Supplying and fixing 5 A to 32 A rating, 250 / 415 V, 10 Ka, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. required.
-
-
-
Single pole
2
186
373.3
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. required.
-
-
-
40 Amp.
1
317
317.16
Earthing with G I earth pipe 4.5 mtr. Long 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required.
1
4998
4998.03
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way , Double door
1
1875
1875.99
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc.. as required.
-
-
-
Upto 450 mm sweep.
9
328
2952.88
Total
-
-
-
Multiplying by Rate factor (without cost index) @ 0.789 X 107/110=0.767 (on Amount Rs. 51248.00 X 0.767)
-
-
-
Total A
-
-
-
Supply and fixing of LED Tube Light with Metal heavy duty box type batten Light fitting 1 x 22 watt suitable for upto 1 x 22 watt LED Polycarbonate tube light complete including tube suitable for both surface & suspended complete in all respect. 2200 system lumens, 1001m/watt, PFPF0.95, THD10%, CRI80, Tube with aluminium heat with 3 year warrantee Cat AA
2
969
1938
Supply & Laying of 25 mm x 3 mm G.I. Strip from earth electrode directly in the ground as required complete in all respect.
10
85
855
Supply and fixing of 16 gauge M S drum with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects .
9
769
6925.5
S/F of LED Bulb10 watt
15
171
2565
S/F of Kit Kat Fuse 100 Amp
2
285
570
Supply & Fixing of Heavey duties exhaust fan 12”dia Usha / Crompton/Bajaj make
9
2850
25650
S/L of Aluminium Flat Twin Service Cable 10 Sq mm 2 Core
50
38
1900
Supply & Fixing of exhaust fan lours 12”dia or 18"dia
9
475
4275
SUBMERSIABLE PUMP WITH BORING
-
-
-
External W/S arrangements with T.W. boring of 150 mm dia with 110 mm dia P.V.C. pipe assembly, 2.00 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangements etc
-
-
-
110 mm PVC casing pipe of ISI mark. S.I. 730 A
165
332
54862.5
P/ F 50 MM GI pipe (B) class. DSR 18.12.6 (280X1.60)
120
379
45543
Nylon mesh for filter.
1
522
522.5
Plastic dori.
1
142
142.5
Solvent cement.
1
237
237.5
110 mm End cap.
1
261
261.25
110 mm Submersible cap.
1
213
213.75
50 mm MS clamp (Heavy).
1
1472
1472.5
50 mm GI elbow.
1
104
104.5
50 mm X 110 mm GI nipple.
1
133
133
2 HP 9 Stage submersible pump of ISI mark with automatic panel.
1
33250
33250
2.5 sqm. Submersible cable.
120
137
16530
Drilling charges for 150mm dia tubewell.
165
641
105806.25
Pea Gravel.
1
9025
9025
2" MS socket.
4
142
570
Cartage of material upto site.
1
475
475
S/Installation of Electronic chlorinator
1
57000
57000
Urinal (Civil Works)
-
-
-
E/W in excavation
4.17
123
516.21
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
0.62
4756
2968.04
B/W in foundation (1:6) with c.
2.8
4980
13939.28
B/W in Superstructure (1:6) with c.
1.98
6358
12557.5
B/W in Superstructure (1:4) with c. 115 mm thick
3.09
784
2427.84
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
15.58
885
13793.69
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
4.95
428
2121.6
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick
2.55
462
1180.19
Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
9.72
119
1161.5
R.C.C. work with cement approved coarse sand and 2 cm Gauge approved stone ballast in the proportion of 1:6 in Foundation & raft, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.
0.85
6636
5641.19
RCC M 20 in beam
0.15
8033
1180.96
M.S/ Iron in R.C.C.
0.78
7530
5888.95
URINALS (Internal Water Supply & Sanitation)
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
-
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
Range of Four urinal basins with 10litre white P.V.C. automatic flushing cistern
1
12973
12973.45
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
-
-
-
Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.
-
-
-
510x1040 mm bowl depth 250 mm
-
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
-
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
-
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 453x357 mm
-
-
-
Providing and fixing toilet paper holder :
-
-
-
c.p brass
-
-
-
Providing and fixing soil, waste and vent pipes :
-
-
-
100 mm dia
-
-
-
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
5
824
4122.3
Providing and fixing soil, waste and vent pipes :
-
-
-
75 mm diameter :
-
-
-
Centrifugally cast (spun) iron socketed pipe as per IS: 3989
-
-
-
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
-
-
-
For 100 mm dia pipe
-
-
-
For 75 mm dia pipe
-
-
-
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100 mm dia
-
-
-
Sand cast iron S&S as per IS - 3989
1
492
492.41
75 mm dia
-
-
-
Sand cast iron S&S as per IS- 3989
-
-
-
Providing and fixing heel rest sanitary bend
-
-
-
100 mm dia
-
-
-
Sand cast iron S&S as per IS - 3989
-
-
-
Providing and fixing double equal plain junction of required degree
-
-
-
100x100x100x100 mm
-
-
-
Sand cast iron S&S as per IS - 3989
1
750
750.65
Providing and fixing double equal plain junction of required degree
-
-
-
75x75x75x75 mm
-
-
-
Sand cast iron S&S as per IS - 3989
-
-
-
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter
-
-
-
100 mm
2
434
869.32
75mm
-
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Sand cast iron S&S as per IS: 3989
1
1394
1394.06
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
-
-
-
100 mm diameter pipe
5
57
289.08
75 mm diameter pipe
-
-
-
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
-
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
150 mm diameter
-
-
-
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
-
-
-
(a) 15 mm nominal dia
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
20mm nominal dia Pipes
5
233
1169.57
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
15 mm nominal dia Pipes
15
347
5213.84
20 mm nominal dia Pipes
5
375
1876.9
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
20 mm nominal bore
1
377
377.02
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length
-
-
-
20 mm nominal bore
-
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
7
3840.5
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
-
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15mm nominal bore
-
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
-
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
-
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
110 mm
-
-
-
Shoe (Plain)
-
-
-
110 mm Shoe
-
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
-
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
150 mm dia. R.C.C. pipe
5
388
1942.71
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
1
8917
8917.04
Extra for depth for manholes :
-
-
-
Size 90x80 cm
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
100x100 mm size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
-
-
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
Ordinary rock :
-
-
-
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
5
697
3486.54
Drinking Water
-
-
-
E/W in excavation
1.53
123
189.38
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
0.43
4756
2059.56
B/W in foundation (1:6) with c.
1.04
4980
5194.24
B/W in Superstructure (1:6) with c.
0.65
6358
4158.28
18 mm thick Granite Stone in Platform
4.25
3586
15224.36
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore. Dsr 18.10.1
8
255
2046.71
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
15 mm nominal bore. Dsr 18.46.1
1
222
222.29
25 mm nominal bore. Dsr 18.46.3
1
306
306.71
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
15 mm nominal bore. Dsr 18.49.1
2
353
707.75
Supply of 110 mm dia. PVC casing pipe for boring 6 kg/sqm cm
3
332
997.5
R.C.C. work with cement approved coarse sand and 2 cm Gauge approved stone ballast in the proportion of 1:6 in Foundation & raft, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.
0.64
6636
4227.57
RCC M 20 in beam
2.23
-
0.16
M.S/ Iron in R.C.C.
0.53
7530
3991.23
Rain Water Harvesting
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil
53.6
123
6643.13
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
35.2
88
3116.54
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
0.7
4756
3329.54
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
0.88
8033
7069.67
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Suspended floors, roofs, landings, balconies and access platform
8.76
647
5671.68
Class-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. required for proper completetion of the work.
13.34
4980
66434.45
Thermo-Mechanically Treated bars of grade Fe-500D or more work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including straightening, cutting, bending, placing in position and binding for proper completion of the work and including supply of steel & binding wire and its wastage.
0.69
7530
5196.13
15 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) in single coat on rough side of single or half brick wall. In plinth.
31
287
8912.62
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar
36
380
13692.13
Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
1
2402
2402.82
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level.
-
-
-
All types of soil
-
-
-
400 mm dia
27
691
18679.3
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
-
-
-
200 mm nominal size dia
18.9
777
14692.8
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, onforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
200 mm nominal size dia
10.6
876
9294.01
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
1.88
1054
1981.93
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.
1.88
1074
2019.28
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
1.88
1074
2019.28
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge.
2.54
1413
3590.56
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in pproved laboratory, i/c disinfection of ubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per uirement and direction of Engineer-in-charge.
10
757
7576.36
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia
1
224
224.24
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia
1
249
249.69
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
95
245
23359.46
Providing, laying and jointing P.V.C. pipes including testing of joints etc. complete : 150 mm dia pipe.
95
475
45125
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round P.V.C. pipes including bed concrete as per standard design:
-
-
-
150 mm diameter P.V.C. pipe
95
823
78263.85
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
-
-
-
Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
9
6699
60293.3
Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
4160
4160.1
BOUNDARY WALL (157.08 M²)
-
-
-
Earth work in trenches for foundation for pipes.cable etc in oridinary soil incl. lift up to 1.5 m and lead upto50 m & dressing of dides & ramming the bottom & disposal of surplus earth as per direction of E/I
112.48
123
13940.91
P.C.C. work with cement approved coarse sand and 40 mm gauge approved stone ballast in proportion of 1:4:8 incl. cost of form work in foundation & floor
10.79
4756
51308.14
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
57.79
6316
365038.17
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
70.14
7578
531525.97
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
46.04
273
12606.63
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
362.95
588
213514.77
Lintels, beams, plinth beams, girders, bressumers and cantilevers
338.27
514
173934.88
Columns, Pillars, Piers, Abutments, Posts and Struts
226.2
671
151831.77
Thermo-Mechanically Treated bars work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage.
216.34
7530
1629175.63
Class-150 brick work in 1:6 cement and COARSE sand mortar in foundation and plinth including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work.
-
-
-
Class-150 brick work in 1:6 cement and COARSE sand mortar in SUPERSTRUCTURE including supply of all materials, labour tools and plants, etc. Required for proper completetion of the work
57.6
6358
366234.05
12 mm cement plaster in single coat on smooth side of single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished evenand smooth no. extra for mixing and additive. (iii) 1cement :6 C. sand
345.84
239
82984.73
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (i) 1 cement: (iii) 1 cement: 6 coarse sand
315.22
276
87018.26
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
661.06
119
78977.26
CC Interlocking 1501.5
-
-
-
EXCAVATION in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.
438.18
123
54307.22
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
1501
152
229423.35
Providing and laying in cement concrete 1:4:8 (1 cement :4coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
6.35
4756
30203.64
M-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools and plants etc required for proper completion of work.
26.56
4980
132256.36
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
300.2
2041
612959.65
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & attern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.
1501
762
1143972.14
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster.
97.5
410
39976.17
Stom Water Drain
-
-
-
Earth work in excavation
43.68
123
5413.66
P.C.C. in 1 : 4 : 8 with
6.24
4756
29680.43
Rcc work in foundation & wall M25
16.44
6636
109107.22
Shuttering
-
-
-
In Foundation
24
273
6571.66
In Wall
144
588
84711.74
Reinforcement work in Rcc
12.91
7530
97220.38
India Marka Hand pump
-
-
-
Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested : Beyond 12 m and up to 18 m depth
40
716
28654.8
Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality.
40
670
26821.16
Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well.
40
381
15249.8
Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories.
1
922
922.84
INDIA MARK HAND PUMP II
1
7600
7600
Platform
-
-
-
E/W in excavation
192.73
123
23886.27
SAND FILLING
103.28
1482
153147.32
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
42.83
4756
203710.48
B/W in foundation (1:6) with c.
27.05
4980
134721.5
12 MM thick 1:6 thick Plaster
51.64
239
12390.75
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
370.64
1408
522157.78
EXTERNAL LIGHTING WITH POLE
-
-
-
Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.
15
25651
384778.5
Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length each ) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.
-
-
-
Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt
including the cost of foundation, excavation & back filling and Required T&P completee in all respect.
-
-
-
Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect.
-
-
-
Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100mm, Bottom dia 200 mm and base plate 16mm thik) having 3 mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation,
excavation & back filling and Required T&P completee in all respect.
-
-
-
Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee
in all respect.
-
-
-
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.
-
-
-
15 A SPN
-
-
-
25 A SPN
-
-
-
40 A SPN
-
-
-
15 A TPN
-
-
-
25 A TPN
-
-
-
40 A TPN
1
2477
2477.6
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 15 Watt. to 25 Watt. Confirming to IP 66 protection complete in all respect.
CAT- AAA
-
-
-
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect.
CAT- AAA
-
-
-
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect.
CAT- AAA
-
-
-
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect.
CAT- AAA
-
-
-
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect.
CAT- AAA
15
12568
188527.5
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect.
CAT- AAA
-
-
-
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all respects
CAT- AAA
-
-
-
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 175 to 200 Watt. Confirming to IP 66 Protection complete in all respects
CAT- AAA
-
-
-
Supply of aluminium conductor XLPE insulated armoured served sheathed cables 1100 Volts grade.
-
-
-
6 sq. mm 2 core
195
101
19821.75
6 sq. mm 4 core
-
-
-
10 sq. mm 4 core
600
125
75240
16 sq. mm 4 core
-
-
-
25 sq. mm 3-1/2 core
-
-
-
35 sq. mm 3-1/2 core
-
-
-
Sub-Head : MV CABLE LAYING
-
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Up to 35 sq. mm
636
282
179456.94
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Up to 35 sq. mm
80
26
2158.16
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
Up to 35 sq. mm (clamped with 1mm thick saddle)
80
40
3208.08
Sub-Head : MV CABLE JOINTING & END TERMINATION
-
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2 X 6 sq. mm (19mm)
-
-
-
3-1/2X 25 sq.mm
-
-
-
3-1/2 X 35 sq.mm
-
-
-
4 X 10 sq. mm (25mm)
16
196
3138.08
Entry & Exit Sign Board
-
-
-
Manufacturing, supplying and fixing retro reflective signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-incharge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat.
-
-
-
The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge
115.8
4105
475433.11
Internal Sinages
-
-
-
Manufacturing, supplying and fixing retro reflective signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-incharge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat.
-
-
-
The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge
115.8
4105
475433.11
GST Extra As per Applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%