Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil Works Others
Eprocure
Opening Date1 Dec 2021
Closing Date13 Dec 2021
Tender AmountRefer Documents
Costs
EMD
₹ 3,35,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_UPPRC_649765_1Bid Award Id
ViewTender No
22/GM-5/UPPCL/2021-22Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Second Floor
2.11
-
6767.58
Third Floor
2.11
-
6767.58
As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete)
-
-
-
Second Floor
57.59
-
6957.58
Third Floor
59.85
-
6957.58
As in item 6 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)
-
-
-
Second Floor
23.54
-
7147.58
Third Floor
22.09
-
7147.58
As in item 6 above but in R.C.C. Raft foundation and footing with approved stone ballast.(Using 1:1.5:3 Mix concrete)
12.19
-
6387.58
As in item 6 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20.
-
-
-
Second Floor
21.2
-
7600
Third Floor
22.82
-
7220
Same as in item No. 11 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement : coarse sand)
-
-
-
Second Floor
71.25
-
5424.5
Third Floor
117.19
-
5424.5
Same as in item no. 14 but in 1:3 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.
-
-
-
Second Floor
39.48
-
5776
Third Floor
39.48
-
5776
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
-
-
-
Second Floor
125.41
-
5320
Third Floor
155.53
-
5320
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand
-
-
-
Second Floor
961.32
-
113.05
Third Floor
1006.75
-
113.05
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 fine sand.
-
-
-
Second Floor
555.1
-
99.75
Third Floor
973.76
-
99.75
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.Per bag of 50 kg cement used in the mix
-
-
-
Second Floor
555.1
-
19
Third Floor
973.76
-
19
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
815
-
25.65
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab upto 0.50 sqm
-
-
-
Ground Floor
11.88
-
3125.36
First Floor
11.88
-
3125.36
First Floor
11.88
-
3125.36
First Floor
11.88
-
3125.36
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
-
-
-
Ground Floor
229.67
-
1330
First Floor
229.67
-
1330
Second Floor
229.67
-
1343.3
Third Floor
229.67
-
1356.73
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
-
-
-
Ground Floor
24.1
-
1330
First Floor
24.1
-
1330
Second Floor
24.1
-
1343.3
Third Floor
24.1
-
1356.73
25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
First Floor
115.84
-
1341.38
Second Floor
31.32
-
1341.38
Third Floor
34.09
-
1341.38
20mm thick Kota stone slab in risers of steps, skirting, in cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
-
-
-
First Floor
31.32
-
1341.38
Second Floor
31.32
-
1341.38
Third Floor
34.09
-
1341.38
Supply & fixing 6 mm thick china white glazed flooring or skirting dado laid with 1 :3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labours & tools etc, required for completion of the work. (size of tiles upto 300x 300 mm).
-
-
-
Ground Floor
165.85
-
1083
First Floor
165.85
-
1083
Second Floor
165.85
-
1093.83
Third Floor
165.85
-
1104.77
25mm Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement. at APRON
156.42
-
228
Supply & fixing of flush doors commercial quality conforming to IS 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (a) 35mm thick Single leaf
238.98
-
1805
M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.
-
-
-
Providing & fixing of hold fast for chaukhats of doors and windows.
294.6
-
53.2
Providing & fixing of door / windows grill.
1216.8
-
60.8
Z-Section steel windows (Openable)
1521
-
64.6
Angle iron door chaukhats 40*40*5
1318.2
-
62.7
Providing and fixing fly proof galvanized M.S. wire gauge to windows and lerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62X19 mm
121.68
-
961
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters
-
-
-
Second class teak wood
40.32
-
3128.21
Fixing of Door, windows/ventilators chaukhats in position.
-
-
-
(a) Door chaukhats
65
-
68.4
(b) Window chaukhats
18
-
45.6
(c) Ventilator chaukhats
16
-
34.2
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface)
-
-
-
Ground Floor
1391.25
-
68.4
First Floor
1391.25
-
68.4
Second Floor
1391.25
-
69.08
Third Floor
1466
-
69.77
Finishing walls with Premium Acrylic smooth exterior paint of required shade: - New work (Two or more coat applied @ 1.67 Ltr./10 Sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 Sqm.
-
-
-
Ground Floor
647
-
76
First Floor
575
-
76
Second Floor
575
-
76.76
Third Floor
1021
-
77.53
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
-
Ground Floor
2038
-
109.25
First Floor
1966.75
-
109.25
Second Floor
1966.75
-
110.34
Third Floor
2487.84
-
111.44
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
129
-
197.21
Providing & fixing S.S. sliding door bolts ISI marked to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
129
-
427.5
Providing and fixing S.S. Steel tower bolts (barrel type) with necessary screws etc. complete
-
-
-
(a) 250 mm x 10mm
129
-
332.5
(ii) 200 mm long
129
-
285
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm
258
-
237.5
Providing and laying "brick coba" 120 mm thick laid with M.150 class brick bat coba 7.50cm. Thick with gap of 15mm to each other.over 20mm. Thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete waterproofing compound filed gaps of coba & top of coba mortar mixed with water proofing compoond.in 1:4 cement & coarse & morter finished smooth & top mashed false square 30cmX30cm.& side wall parapet shall be mono tythic plaster wall up to 30cm.higher & junction & corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T & P etc. com. for proper completion of work.
392.93
-
712.5
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
313.45
-
83.6
Same as item above but on new wood surface.
638.6
-
83.6
Fixing panes of glass with atul or equivalent I.S.I. marked quality putty, brads and springs complete.(a) 4 mm thick
121.08
-
817
Construction of drain along with apron.
173.08
-
464.45
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
60.1
-
1187.5
Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
112.62
-
394.92
P/F curtain rods of 1.25mm chromium plates brass plates, with two chromium plated brass brackets fixed with C.P brass screws and wooden plugs etc. wherever necessary complete 9a0 25 mm dia.
220.8
-
407.27
INTERNAL PLUMBING WORKS I
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid
32
-
4360.29
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
32
-
2619.04
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe
-
-
-
32 mm dia
16
-
74.39
40 mm dia
16
-
83.47
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
32
-
1088.3
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required. Kitchen sink with drain board Size 510x1040 mm bowl depth 250mm
16
-
4373.35
CP Brass fittings
-
-
-
Providing and fixing unplasticised PVC connection pipe with brass unions
-
-
-
45 cm length 15 mm nominal bore
64
-
70.41
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore
32
-
355.36
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
64
-
468.51
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 15 mm nominal bore
96
-
451.25
Providing and fixing C.P. brass shower rose with 15 or 20mm inlet 150 mm diameter
32
-
160.14
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:15mm nominal bore
32
-
514.23
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm
180
-
244.97
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 100 /90 mm dia
130
-
692.99
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110mm
140
-
258.75
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
-
-
-
Bend 87.5 degree
-
-
-
110 mm Bend
8
-
110.14
Shoe (Plain)
-
-
-
110 mm Shoe
8
-
96.52
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
8
-
40.08
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm
72
-
244.97
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
8
-
207.01
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.
-
-
-
20mm dia nominal outer dia pipes
310
-
405.57
32mm dia nominal outer dia pipes
120
-
576.06
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).
-
-
-
15mm dia nominal bore
180
-
241.66
20mm dia nominal bore
500
-
291.87
25mm dia nominal bore
60
-
371.52
32mm dia nominal bore
150
-
449.3
40mm dia nominal bore
30
-
542.52
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.
-
-
-
15mm dia nominal bore
180
-
12.89
20mm dia nominal bore
500
-
15.4
25mm dia nominal bore
60
-
20.1
32mm dia nominal bore
150
-
24.09
40mm dia nominal bore
30
-
28.33
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).
-
-
-
15mm dia nominal bore
76
-
199.97
20mm dia nominal bore
150
-
221.51
25mm dia nominal bore
20
-
288.48
32mm dia nominal bore
50
-
325.93
40mm dia nominal bore
10
-
383.82
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
25mm dia nominal bore
4
-
421.69
32mm dia nominal bore
12
-
493.02
Providing and fixing brass stop cock of approved quality.
-
-
-
b) 20 mm nominal bore
32
-
276.9
Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. Capcity in Per Liters
8000
-
7.47
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.
35
-
308.92
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
100mm dia SW pipe
15
-
268.93
150mm dia SW pipe
20
-
422.38
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design
-
-
-
100mm dia SW pipe
15
-
692.99
150mm dia SW pipe
20
-
847.5
Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With Sewer bricks conforming to IS : 4885
6
-
1969.08
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75 (i) For Sewer Line
2
-
9249.82
Extra for depth for manholes: Size 90x80cm with FPS bricks(class I ).
1
-
6364.16
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar
4
-
358.11
Providing and fixing in floor and wall face Ringfit UPVC ASTRAL ULTRADRAIN Conventional system for soil and waste water pipes conforming to (HSN CODE: 3917) Type B including jointing with seal ring. (i) Double socketed pipes.
-
-
-
a) 110mm dia P.V.C. pipe
200
-
579.5
b) 90mm dia P.V.C. pipe
120
-
484.5
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince) P-Trap type Floor Trap 110 x 90 mm
48
-
256.5
Providing and fixing terminal guard.
-
-
-
a) 110mm
20
-
76
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.
-
-
-
110mm bend
56
-
209
Coupler
-
-
-
110mm
322
-
142.5
90mm
86
-
133
Single tee with door
-
-
-
110x110x110 mm
50
-
318.25
Providing & fixing Soap Dispenser with Metallic bottle
32
-
3363
Providing & fixing Bottle Trap (With Internal Partition) 32mm Size With 250mm & 190mm Long Wall Connection Pipes & Wall Flange
1
-
1795.5
Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook (for E.W.C.)
32
-
2123.25
Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to15 mm nominal bore
32
-
1206.5
Providing and fixing pvc Inlet fitting with 2 inlets 80 mm size fabricated from 110 mm dia PVC pipes(approx. length=150mm to 300mm) and fixed to PVC trap with joint and set in cement concrete as per standard drawing complete.
32
-
855
SCHEDULE OF QUANTITIES FOR INTERNAL ELECTRICAL WORKS SUBHEAD I- WIRING POINTS
-
-
-
Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
304
-
579.5
Same as item No.(1) but for two way light Points.
4
-
751.45
Same as item No.(1) but for fan and light duty exhaust fan.
112
-
637.45
Same as item No.(1) but for 5 Amp plug point
112
-
310.65
Same as item No.(1) but for call bell point
16
-
543.4
Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
750
-
141.55
Supply and wiring of submain 2 number 16 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 10.0 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
295
-
375.25
Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work . ( for Telephone/Television points)
100
-
58.9
SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS
-
-
-
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
64
-
133
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
48
-
185.25
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.
64
-
142.5
Supply fixing of electronic fan regulator(modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
64
-
491.15
Supply & fixing of recess/Surface mounting round 10 to 15 watt,cut out 125mm,height min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.(CAT: AAA)
36
-
1282.5
Supply & fixing of single wall light bracket made of brass on matching polished MDFEG board brass including connection etc. as required. CAT AAA
64
-
1567.5
Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA)
64
-
1130.5
Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG/TEAK PLY board including making connection etc. as required.
16
-
118.75
Supply & fixing of batten / angle holder complete in all respect.
144
-
57
NON. SCH.
-
-
-
Supply of 15 watt CFL bulb complete in all respects as required.Make: Havels Or Equivalent
144
-
133
SUBHEAD III-DISTIBUTION BOARD
-
-
-
Supply and fixing of flush/surface mounting distribution boards without MCB with additional metal door complete in all respects.(CAT: B)
-
-
-
8 Way SPN
2
-
1805
12 Way SPN
16
-
2137.5
Supply and fixing of 240 volts 'L' series miniature circuit breaker 6 Amp. To 32 Amp. (10 K A ) in existing MCB, DB complete with connections as required. (CAT: B)
-
-
-
6 - 32 amps.
112
-
247
Supply fixing of 63 Amp. DP MCB(10KA). (CAT: B)
16
-
864.5
Supply and fixing of power plug with 15A/250 V flush type switch and 5 Pin 15 A/250V flush type universal socket in suitable M.S. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.
48
-
323
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects.
85
-
23.75
Supply and fixing of single phase multifuntional electronic energy meter 10 to 60 Amp. Capacity fitting in integral box on wall complete in all respect.
17
-
1613.1
SUBHEAD IV-EARTHING SYSTEM
-
-
-
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
2
-
5111
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
50
-
85.5
Supply and fixing of two number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of work as directed at side.
50
-
199.5
SUBHEAD V-METER PANEL BOARD NON. SCH.
-
-
-
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.
-
-
-
All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.
-
-
-
The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
-
-
-
The minimum clearances between bus bars shall be as follows :
-
-
-
Phase to phase - minimum 20mm
-
-
-
Phase to neutral-minimum 15mm
-
-
-
Meter Panel Board
-
-
-
Incoming :
-
-
-
One (1) No 125 Amp. FP MCCB of 25 KA Breaking capacity
-
-
-
Metering :
-
-
-
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
-
-
-
One (1) No. (0-125A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
-
-
-
One (1) Set of Phase Indication Lamp.
-
-
-
Bus Bar :
-
-
-
One (1) No. 125 Amp.TPN aluminimum bus bar of suitable length.
-
-
-
Outgoing :
-
-
-
Phase indication lamps on each outgoing to be provided.
-
-
-
63 Amps SP MCB of 10KA (Ics=Icu) Breaking Capacity-13 No
-
-
-
63 Amps SP MCB of 10KA (Ics=Icu) Breaking Capacity-1 No Spare
-
-
-
40 Amps SP MCB of 10KA (Ics=Icu) Breaking Capacity- 1 No No Spare
1
-
89300
SUBHEAD VI-TELEPHONE/TELEVISION SYSTEM
-
-
-
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75 mm)
32
-
206.11
S/F MODULAR TYPE SWITCH / SOCKET :-
-
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
-
-
-
TV antenna socket outlet
16
-
100.94
Telephone socket outlet
16
-
100.94
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2 Pair
460
-
16.97
Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
460
-
23.71
NON SCH.
-
-
-
S/f of 10/20 pair Junction Boxes for Floors and building with Krone connectors , with connection and punching of same
1
-
4750
SUBHEAD VII-MISCELLENEOUS NON. SCH.
-
-
-
Providing and Laying unplastisized rigid PVC pipe conforming to IS:13592 type A including jointing , cutting and making good the walls & floors as per requirement. 150mm
50
-
617.5
Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required
64
-
2042.5
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep.
48
-
1757.5
MAIN BUILD BALANCE WORK
-
-
-
Wiring points for light with 1.5 sqmm.FRLSH PVC insulated single core aluminium condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
134
-
579.5
Same as item No.(1) but for two way light Points.
4
-
751.45
Same as item No.(1) but for fan and light duty exhaust fan.
41
-
637.45
Same as item No.(1) but for 5 Amp plug point
21
-
310.65
Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
750
-
141.55
Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 25mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
235
-
193.8
Supply and wiring of submain 2 number 10sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 25mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 6 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
100
-
258.4
Supply and wiring of submain 4 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 32mm dia PVC conduit along with two numbers 6 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
100
-
479.75
Supply and wiring of submain 4 number 16 sqmm . PVC insulated 1100 V grade single core copper conductor cable in 40mm dia PVC conduit along with two numbers 6 sqmm single core PVC insulated copper conductor cable as earth contunity wire etc. complete in all respects.
60
-
686.85
Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work . ( for Telephone points)
40
-
58.9
SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS
-
-
-
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
35
-
133
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
6
-
185.25
Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P. sheet spot welded four to eight holes of 25.4mm for pipe entry of the box. Holes should be semi-shuttered type with 0.50mm G.P.sheet made upper & lower cover duly screwed fitted with 300mm round zink coted M.S. bar x12mm & brand name should be embossed. Fixing with wiring conduil laid in the R.C.C. roof before concreting alongwith concreting alongwith supply of all material, labour, T&P etc.required for proper completion of the work.
35
-
142.5
Supply fixing of electronic fan regulator(modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
35
-
491.15
Supply & fixing of recess/Surface mounting round 10 to 15 watt,cut out 125mm,height min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.(CAT: AAA)
6
-
1282.5
Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA)
80
-
1130.5
Supply & fixing of LED Tube Light with batten suitable for up to 2 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA)
20
-
1700.5
S/F of single LED light wall bracket 3 to 6Watt on matching M.D.F.E.G..board base etc. complete in all respects.(CAT: AAA)
24
-
2470
Supply & fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 45 Watt to 50 Watt and Confirming to IP66 protection having Company LOGO Engraved complete in all respect including Labour. (CAT: AAA)
4
-
4693
NON SCH.
-
-
-
S/F of 14W LED Mirror light Similar to Crompton Greaves Cat Ref. LCL-14-CDL or equivalent.
4
-
1779.35
SUBHEAD III-DISTIBUTION BOARD
-
-
-
Supply and fixing of flush/surface mounting distribution boards without MCB with additional metal door complete in all respects.(CAT:A)
-
-
-
4 Way TPN
1
-
3429.5
6 Way TPN
4
-
4151.5
Supply and fixing of 6Amp to 32 Amp(10 KA) MCB in existing MCB, DB complete with connections as required. (Cat-A)
48
-
247
Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge.(CAT:A)
-
-
-
40 Amp. 4 Pole MCB
4
-
2161.25
63 Amp. 4 Pole MCB
1
-
2175.5
Supply and fixing of power plug with 15A/250 V flush type switch and 5 Pin 15 A/250V flush type universal socket in suitable M.S. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.
23
-
323
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects. (CAT:A)
36
-
23.75
Supply and fixing sheet steel enclosure surface / flush mounting fitted with 20 Amp 2 Pin and earth metal clad scraping earth plug and socket complete in all respect as directed at the site by Engineer in charge (CAT:A)
2
-
1539
Supply and fixing sheet steel enclosure surface / flush mounting fitted with 30 Amp 2 Pin and earth metal clad scraping earth plug and socket complete in all respect as directed at the site by Engineer in charge (CAT:A)
1
-
3277.5
SUBHEAD IV-EARTHING SYSTEM
-
-
-
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete inall respects.
1
-
5111
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
25
-
85.5
Supply and fixing one number 8 SWG G.I. wire in 15 mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand labour, T&P other material required for proper completion of the other work as directed at site
50
-
190
SUBHEAD V-MAIN L. T. PANELS
-
-
-
NON SCH.
-
-
-
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and
-
-
-
adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.
-
-
-
All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.
-
-
-
The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
-
-
-
The minimum clearances between bus bars shall be as follows :
-
-
-
Phase to phase - minimum 20mm
-
-
-
Phase to neutral-minimum 15mm
-
-
-
MAIN PANEL
-
-
-
Incoming :
-
-
-
One (1) No 200 Amp. FP MCCB of 25 KA Breaking capacity
-
-
-
Metering :
-
-
-
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
-
-
-
One (1) No. (0-200A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
-
-
-
One (1) Set of Phase Indication Lamp.
-
-
-
Bus Bar :
-
-
-
One (1) No.200 Amp.TPN aluminimum bus bar of suitable length.
-
-
-
Outgoing :
-
-
-
Phase indication lamps on each outgoing to be provided.
-
-
-
63 Amps TP MCB of 10KA (Ics=Icu) Breaking Capacity-1 No
-
-
-
40 Amps TP MCB of 10KA (Ics=Icu) Breaking Capacity-4 No
-
-
-
63 Amps TP MCB of 10KA (Ics=Icu) Breaking Capacity- 1 No Spare
-
-
-
40 Amps TP MCB of 10KA (Ics=Icu) Breaking Capacity- 1 No Spare
1
-
87400
SUBHEAD VI-TELEPHONE SYSTEM
-
-
-
S/F MODULAR BOXES, BASE & COVER PLATE :-
-
-
-
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75 mm)
6
-
208.96
S/F MODULAR TYPE SWITCH / SOCKET :-
-
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. Telephone socket outlet
6
-
100.94
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2 Pair
175
-
16.97
NON SCH.
-
-
-
S/f of 10 pair Junction Boxes for Floors and building with Krone connectors , with connection and punching of same
1
-
4750
SUBHEAD VIII-MISCELLANEOUS
-
-
-
NON SCH.
-
-
-
Providing and Laying unplastisized rigid PVC pipe conforming to IS:13592 type A including jointing , cutting and making good the walls & floors as per requirement. 150mm
10
-
617.5
Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. BEE 5 star rated-1200 mm sweep
35
-
2042.5
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep.
6
-
1757.5
50.00 K.L. UNDER GROUND TANK
-
-
-
Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m (5 fts.) and lead upto 30 mt. (100 fts.) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-Incharges upto a distance of 30mt. (100 fts) from the foundation trenches.
-
-
-
0.00 LVL.-1.50 MTR. LVL
62.99
-
104.5
1.50 MTR. LVL. - 3.00 MTR. LVL.
41.99
-
118.75
3.0 MTR. LVL. - 3.40 MTR. LVL.
2.15
-
133
Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors.
4.2
-
4180
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in slab excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
4.11
-
6957.58
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in raft foundation and footing excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
11.25
-
6387.58
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in columns excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
12.89
-
7220
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks.
39.74
-
5320
Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
64.01
-
394.93
Class M-150 brick work in 1:6 cement coarse sand (of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
0.22
-
4987.5
II. SEPTIC TANK & SOAK PIT
-
-
-
Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed.
-
-
-
In all kind of soil upto 1.5m depth
28.65
-
104.5
In all kind of soil upto 1.5m to 3.0m. depth
18.65
-
118.75
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 40mm nominal size)
2.97
-
4940
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
11.4
-
5177.5
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
1.67
-
6957.58
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
131
-
53.2
12mm cement plaster on rough side of mix 1:3 (1 cement : 3 coarse sand)
41.7
-
137.75
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
12
-
334.71
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
2
-
483.48
Providing & fixing 75mm dia vent pipes.
1
-
783.11
Providing & fixing of 75mm dia cast iron terminal guard.
1
-
241.23
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
M.D. -10- Circular shape 500mm internal diameter
2
-
878.41
M.D. -2.5- Circular shape 450mm internal diameter
4
-
871.33
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.
-
-
-
With F.P.S. bricks
2
-
21441.8
HOSE WASHING LINE
-
-
-
Earth work in Excavation in trenches for foundation pipes cable etc in ordinary soil (Loam clay or sand) including lift upto 1.5m lead upto 50m and dressing of sides and raming of bottom and disposal of sides and ramming of bottom and disposal of surplus excavated earth as directed by the engineer I/C within a led of 30m.
1.56
-
104.5
Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)
0.45
-
4180
R.C.C. work with cement approved coarse sand and 20mm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and tools and plants etc required for proper completion of the works. Strength of the concrete shall not be less than M-20.As above but for slabs
2.7
-
6957.58
As above but for beam
0.74
-
7147.58
Boring providing & installing cast-in-situ single under reamed pile of specified dia and length below pile cap in cement concrete with mix M-20 of 20mm nominal size of grit to size to carry a safe working load not less than specified excluding the cost of steel reinforcement but including boring with pentonide solution and length of pile to embedded in the pile cap. 300 mm dia Piles (P1)
38.5
-
1085.82
M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
2.05
-
5177.5
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
6.07
-
5320
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand
17.82
-
113.05
Finishing walls with water-proofing oncement paint of approved make such as super snowcem, durrocem, robiacem, guttucem supercem quality and of required shadeon undecorated wall surfaces (two coat) over one and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials.
17.82
-
59.85
B. WORK , TYPE -A (G+1) 02 NO. RESIDENCE I INTERNAL PLUMBING WORKS
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid
4
-
4360.29
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
4
-
2619.04
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia
2
-
83.47
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
4
-
1088.3
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required. Kitchen sink with drain board Size 510x1040 mm bowl depth 250mm
2
-
4373.35
CP Brass fittings
-
-
-
Providing and fixing unplasticised PVC connection pipe with brass unions
-
-
-
45 cm length 15 mm nominal bore
8
-
70.41
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore
4
-
355.36
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
8
-
468.51
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 15 mm nominal bore
4
-
451.25
Providing and fixing C.P. brass shower rose with 15 or 20mm inlet 150 mm diameter
4
-
160.14
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931: 15mm nominal bore
4
-
514.23
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm
25
-
244.97
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 100 /90 mm dia
20
-
692.99
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110mm
30
-
258.75
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
-
-
-
Bend 87.5 degree
-
-
-
110 mm Bend
4
-
110.14
Shoe (Plain)
-
-
-
110 mm Shoe
4
-
96.53
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
4
-
40.08
Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110mm
18
-
244.97
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
4
-
207.01
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.
-
-
-
20mm dia nominal outer dia pipes
40
-
405.57
32mm dia nominal outer dia pipes
15
-
576.06
Providing and fixing GI pipes complete with GI fittings and clamps, including cutting and making good walls etc. (internal work).
-
-
-
Internal work-Exposed on wall
-
-
-
15mm dia nominal bore
30
-
241.66
20mm dia nominal bore
90
-
291.87
25mm dia nominal bore
20
-
371.52
32mm dia nominal bore
5
-
449.3
Painting GI pipes and fittings with SYNTHETIC enamel paint over a ready mixed priming coat, both of approved quality for new work.
-
-
-
15mm dia nominal bore
30
-
12.89
20mm dia nominal bore
90
-
15.4
25mm dia nominal bore
20
-
20.1
32mm dia nominal bore
5
-
24.09
Providing and fixing GI Union in GI pipes including cutting and threading the pipe and making long screws etc. complete (new work).
-
-
-
15mm dia nominal bore
10
-
199.97
20mm dia nominal bore
30
-
221.51
25mm dia nominal bore
7
-
288.48
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
25mm dia nominal bore
1
-
421.69
32mm dia nominal bore
2
-
493.02
Providing and fixing brass stop cock of approved quality.
-
-
-
b) 20 mm nominal bore
6
-
276.9
Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank. [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license].Capcity in Per Liters
1000
-
7.47
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.
20
-
308.92
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
100mm dia SW pipe
10
-
268.93
150mm dia SW pipe
10
-
424.28
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design
-
-
-
100mm dia SW pipe
10
-
692.99
150mm dia SW pipe
10
-
847.5
Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With Sewer bricks conforming to IS : 4885
3
-
1969.08
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design.
-
-
-
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75
-
-
-
(i) For Sewer Line
2
-
9249.82
Extra for depth for manholes:Size 90x80cm with FPS bricks(class I ).
1
-
6364.16
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar
4
-
358.11
Providing and fixing in floor and wall face Ringfit UPVC ASTRAL ULTRADRAIN Conventional system for soil and waste water pipes conforming to (HSN CODE: 3917) Type B including jointing with seal ring. (i) Double socketed pipes.
-
-
-
a) 110mm dia P.V.C. pipe
60
-
579.5
b) 90mm dia P.V.C. pipe
15
-
484.5
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince)
-
-
-
P-Trap type Floor Trap 110 x 90 mm
10
-
256.5
Providing and fixing terminal guard.
-
-
-
a) 110mm
5
-
76
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.
-
-
-
110mm bend
9
-
209
Coupler
-
-
-
110mm
43
-
142.5
90mm
11
-
133
Single tee with door
-
-
-
110x110x110 mm
10
-
318.25
Providing & fixing Soap Dispenser with Metallic bottle
4
-
3363
Providing & fixing Bottle Trap (With Internal Partition) 32mm Size With 250mm & 190mm Long Wall Connection Pipes & Wall Flange
4
-
1795.5
Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook (for E.W.C.)
4
-
2123.25
Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to15 mm nominal bore
4
-
1206.5
Providing and fixing pvc Inlet fitting with 2 inlets 80 mm size fabricated from 110 mm dia PVC pipes(approx. length=150mm to 300mm) and fixed to PVC trap with joint and set in cement concrete as per standard drawing complete.
6
-
855
SCHEDULE OF QUANTITIES FOR INTERNAL ELECTRICAL WORKS SUBHEAD I- WIRING POINTS
-
-
-
Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
58
-
579.5
Same as item No.(1) but for two way light Points.
1
-
751.45
Same as item No.(1) but for fan and light duty exhaust fan.
16
-
637.45
Same as item No.(1) but for 5 Amp plug point
18
-
310.65
Same as item No.(1) but for call bell point
2
-
543.4
Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
360
-
141.55
Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
60
-
258.4
Supply and wiring of submain 4 number 10 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 32mm dia PVC conduit along with two numbers 6 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
60
-
479.75
Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work . ( for Telephone/Television points)
115
-
58.9
SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS
-
-
-
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
10
-
133
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
6
-
185.25
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.
10
-
142.5
Supply fixing of electronic fan regulator(modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
10
-
491.15
Supply & fixing of single wall light bracket made of brass on matching polished MDFEG board brass including connection etc. as required. CAT AAA
10
-
1567.5
Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA)
14
-
1130.5
Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG/TEAK PLY board including making connection etc. as required.
2
-
118.75
Supply & fixing of batten / angle holder complete in all respect.
26
-
57
NON. SCH.
-
-
-
Supply of 15 watt CFL bulb complete in all respects as required.
26
-
133
Make: Havels Or Equivalent
-
-
-
SUBHEAD III-DISTIBUTION BOARD
-
-
-
Supply and fixing of flush/surface mounting distribution boards without MCB with additional metal door complete in all respects.(CAT: B) 6 Way TPN
2
-
3087.5
Supply and fixing of 240 volts 'L' series miniature circuit breaker 6 Amp. To 32 Amp. (10 K A ) in existing MCB, DB complete with connections as required. (CAT: B) 6 - 32 amps.
24
-
247
Supply fixing of 6 Amp. DP MCB(10KA) C Curve. (CAT: B)
1
-
541.5
Supply fixing of 40 Amp. 4 pole mcb(10KA). (CAT: B)
2
-
2161.25
Supply and fixing of power plug with 15A/250 V flush type switch and 5 Pin 15 A/250V flush type universal socket in suitable M.S. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.
14
-
323
Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge.
2
-
1539
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects.
12
-
23.75
Supply and fixing of single phase multifuntional electronic energy meter 10 to 60 Amp. Capacity fitting in integral box on wall complete in all respect.
1
-
1613.1
SUBHEAD IV-EARTHING SYSTEM
-
-
-
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
1
-
5111
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
25
-
85.5
Supply and fixing of two number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of work as directed at side.
50
-
199.5
SUBHEAD V-METER PANEL BOARD NON. SCH.
-
-
-
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and
-
-
-
adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.
-
-
-
All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.
-
-
-
The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
-
-
-
The minimum clearances between bus bars shall be as follows :
-
-
-
Phase to phase - minimum 20mm
-
-
-
Phase to neutral-minimum 15mm
-
-
-
Meter Panel Board
-
-
-
Incoming :
-
-
-
One (1) No 63 Amp. FP MCB of 10 KA Breaking capacity
-
-
-
Metering :
-
-
-
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
-
-
-
One (1) No. (0-63A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
-
-
-
One (1) Set of Phase Indication Lamp.
-
-
-
Bus Bar :
-
-
-
One (1) No. 100 Amp.TPN aluminimum bus bar of suitable length.
-
-
-
Outgoing :
-
-
-
Phase indication lamps on each outgoing to be provided.
-
-
-
40 Amps TP MCB of 10KA (Ics=Icu) Breaking Capacity- 1 No
-
-
-
6 Amps SP MCB of 10KA (Ics=Icu) Breaking Capacity- 1 No
-
-
-
Three Phase Energy Meter-2 Nos
-
-
-
40 Amps TP MCB of 10KA (Ics=Icu) Breaking Capacity- 1 No Spare
-
-
-
6 Amps SP MCB of 10KA (Ics=Icu) Breaking Capacity- 1 No Spare
1
-
57000
SUBHEAD VI-TELEPHONE/TELEVISION SYSTEM
-
-
-
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 Module (75mm X 75 mm)
4
-
206.11
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
-
-
-
Telephone socket outlet
2
-
100.94
TV antenna socket outlet
2
-
100.94
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2 Pair
60
-
16.97
Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
60
-
23.71
S/f of 10 pair Junction Boxes for Floors and building with Krone connectors , with connection and punching of same
1
-
4750
SUBHEAD VII-MISCELLENEOUS
-
-
-
Providing and Laying unplastisized rigid PVC pipe conforming to IS:13592 type A including jointing , cutting and making good the walls & floors as per requirement. 150mm
10
-
617.5
Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required
10
-
2042.5
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep.
6
-
1757.5
GST Extra as per applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements