Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Eprocure
Opening Date11 Sep 2021
Closing Date20 Sep 2021
Tender AmountRefer Documents
Costs
EMD
₹ 5,49,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_UPPRC_618886_1Bid Award Id
ViewTender No
18/PCL/G.M./ZONE-2/BLY/2021-22Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling of earth in plinth in 20cm layer including leveling, dressing and watering and also including of supply of earth including carted loading & unloading as per direction of Engineer incharge..
182.91
-
292.6
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
206.4
-
6631
Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.
230.5
-
712.5
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete(plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
1402.38
-
121.6
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-200.
68.41
-
8084.5
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Slab excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.
279.5
-
8103.5
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Lighter Beam excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.
15.45
-
8597.54
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Raft Foundation excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.
8.12
-
7899.29
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Column excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.
16.77
-
8129.15
M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
427.37
-
4636
First class brick M-150 work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms.(G.F and F.F)
567.3
-
5258.25
First class brick M-150 work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms.(IInd Floor)
9.43
-
5310.83
First class brick M-150 work in 1:4 cement and coarse sand of 2.25 fineness modulus) mortar in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall less than 12cms.(G.F.& F.F.)
94.19
-
5571.75
First class brick M-150 work in 1:4 cement and coarse sand of 2.25 fineness modulus) mortar in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall less than 12cms.(IInd Floor)
18.83
-
5627.47
1st Class B/W M-150 in Septic tank (1cement : 4coarse sand)
38.98
-
4797.5
Painting on D.P.C. with two coats of air blown bitumen 85/50 or 85/25@ 1.7kg/Sqm. Including cost of fuel if any.
174.06
-
153.9
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
283.29
-
5937.5
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth. (1) 1 cement : 6 CORASE sand
4883.34
-
152
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 CORASE sand
2661.72
-
165.3
Engraving lines ( Making Grooves ) in the plaster of outer face wall verticallyand horizantally to display the surface as stone facing as directed by the engineer in charge including labour & all T& P etc. required for proper completion of the work
1579.04
-
64.6
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement without base concrete including fixing of glass strip(excluding cost of glass strip).(40 mm thick floor).
984.64
-
389.5
12 mm thk Plastering inside septic tank 1 cement : 3 coarse sand
81.96
-
175.75
15mm cement plaster on rough side of mix 1:4 (1 cement : 4 Rain Water Rechargewell coarse sand)
25.91
-
252.85
20 mm thick cement plaster in dado or skirting in 1:3 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.
176.86
-
185.25
Supply of glass strips for flooring.35 mm wide & 5.5 to 2.2 mm thick.
3446.24
-
26.6
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
429.9
-
1054.5
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
46.63
-
1054.5
Kota stone slab flooring over 25 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars
245.88
-
1045
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 2 cm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
51.97
-
950
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade (Area of slab upto 0.50 sqm)
4.1
-
2954.5
Supply and fixing 5 mm thick China glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 200x300mm).
496.92
-
978.5
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).
210.51
-
256.5
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
218.15
-
1349
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
7.11
-
1453.5
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of hold fast for chaukhats of doors and windows.Providing & fixing of door / windows grill.Z-Section steel windows with Openable panels, excluding Glass panes.Angle iron door chaukhats 40*40*5
9078.64
-
62.61
Fixing of Door, windows / ventilators chaukhats in position.Door chaukhats
107
-
104.5
Window chaukhats
91
-
78.85
Ventilator chaukhats
44
-
52.25
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials.
7029.35
-
86.45
Finishing walls two coat with Acrylic Smooth exterior paint of best quality including supply of all material labour and T&P etc required for proper completion of the work
2661.72
-
87.4
Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered wall surface to prepare the syrface even and smooth complete.
9691.07
-
91.28
Providing and fixing ISI marked oxidised S.S. sliding door bolts with nuts and screws etc. complete :(a) 250mm x 16mm
107
-
361
Providing and fixing ISI marked oxidised S.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :(a) 250 mm x 10mm
107
-
190
(b) 200 mm x 10mm
107
-
153.9
Providing and fixing ISI marked oxidised S.S. handles conforming to IS:4992 with necessary screws etc. complete : 150 mm
214
-
42.75
Providing and laying "Brick Coba" 100 mm thick laid M-150 class brick ballast coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compound spresding cement slurry mixed with aerelic cement concrete water proofing compound in 1:4 cement and coarse sand mortar finished smooth & Top mashed false square 30 cmx 30 cm and side wall parapet shall be monolythic plaster wall upto 30 cm higher & junction and corners shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @2% by weight and including S/o all material, labour T & P etc complete for proper completion of work.
1435.73
-
1092.5
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
1039.73
-
69.35
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick.
184.06
-
436.05
Providing apron drain (150mmx150mm) with brick work 1:4(cement: corase sand) over base concrete of 1:2:4 finished with 12mm plaster(1:3 cement::coarse sand) and 25mm thick cement concrete flooring (1:2:4) of 20mm aggregate size with coat of neat cement.
287.48
-
584.11
Providing and fixing in position collepsible steel shutters with verticals chanels 20*10*2mm and braced with flate iron digonals 20*5 mm. size with top and bottom rails of T iron 40*40*6 mm. with 38 m dia steel pulleys with bolts. Nut locking arregement stopers handle of approved lead point.
29.46
-
3657.5
S/O Hand rail and balustrade modular system passive SS-304 grade decorative railing system comprising of hand rail 50mm and 1mm thick and 3 No Horizontal steel pipe of 19mm dia and 1.5mm thick of equal spacing with balustrade to SS pipe of 38mm and 1.5mm thick @ 1200mm C/C of passivated SS 304 grade and fix duly on the floor with specially rivet expansion bolt and finish the surface foor and covering with steel show with all visible stainless metal of 304 grade in satin finish hight of railing is 900mm as per detailed specification.
44
-
3610
Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. With decorative veneering on one side and commercial veneering on other side
197.92
-
1249.25
Providing & laying of light cinder filling under floor of toilets and other sunken roofs.
16.87
-
1187.5
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment
14.7
-
589
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
53.21
-
369.11
P/F straight Grab bars in stainless steel 32mm dia, 60mm ciearance and 600 mm long
1
-
950
P/F drop down Grab bars in stainless steel 32mm dia.
1
-
1567.5
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With Second class teak wood beading 62*19 mm
185.71
-
771.4
Drip course/ groove in plastered surface or moulding to rcc projection
310.55
-
46.69
Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.
12
-
3186.3
Same as above but for Eropion type W.C. pan with black plastic seat and lid Make, Cera, Hidustan
12
-
4188.55
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap
39
-
698.25
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.b) 40mm dia
20
-
66.5
32 mm dia
19
-
68.4
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.
20
-
465.03
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
25
-
744.8
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
3
-
4087.51
Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge.15mm nominal bore
16
-
235.89
Providing and fixing CP Brass 32 mm size Bottal Trap of approved quality & make and as per the direction of Enginer-in-charge.
20
-
689.57
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms
28
-
123.81
Providing 15 mm dia. inlet C.P. brass shower rose with 15 or 20mm inlet. 100mm Dia
16
-
118.62
Providing & fixing soil, waste and vent pipes.a) 100mm dia centrifugally cast iron s&s pipe.
220
-
852.9
b) 75mm dia centrifugally cast iron s&s pipe.
156
-
774.69
75 mm dia sand cost iron S&S pipe. D.S.R. - 17.35.2.1
4
-
731.93
Providing & fixing sand cost iron terminal guard 75 mm dia. D.S.R. - 17.56.2.1
4
-
225.46
Providing & fixing C.I. tee at the inlet & outlet of septic tank. D.S.R. - 7087
4
-
451.88
Providing & fixing Nhani trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.a) 100mm inlet & 75mm outlet.
36
-
1233.39
Providing and fixing plain bend of require degree a) 100mm sand cast iron s&s pipes
36
-
305.14
a) 75mm sand cast iron s&s pipes
36
-
226.26
Providing & fixing plane sand cost iron S&S bend of required degree 75 mm. D.S.R. - 17.38.2.1 75 mm
2
-
294.43
Providing lead caulked joints to sand cost iron/ cetrifugally cast (squn) irons pipes & fitting of dia. 75 mm D.S.R. - 17.58.2
2
-
323.37
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.a) 100x100x100mm
30
-
521.41
b) 75x75x75mm
30
-
367.34
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes a) 110mm diameter.
270
-
184.57
Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc (a) 25mm dia nominal bore (medium duty).Academic
95
-
185.25
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.Exposed on wall a) 25mm dia nominal bore (medium duty) Hostel
70
-
225.15
Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall a) 15mm dia nominal bore.
160
-
213.75
b) 20mm dia nominal bore
110
-
242.25
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.a) 15mm nominal bore
108
-
57
Providing & fixing CP brass short body of approved quality conforming to IS 8931 a) 15mm nominal bore
26
-
338.2
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.a) 15mm nominal bore
47
-
448.4
Providing and fixing gun metal gate valve with wheel of approved quality.a) 25 mm dia nominal bore
5
-
334.38
a) 20 mm dia nominal bore
15
-
365.75
b) 25mm dia nominal bore
10
-
441.75
c) 32 mm dia nominal bore
10
-
388.22
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete a) 15 mm dia nominal bore
6
-
261.25
b) 20 mm nominal bore
4
-
356.25
c) 25 mm nominal bore
4
-
413.25
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
45
-
433.2
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.a) Circular Tank
10000
-
5.7
Providing M.S. foot rest including fixing with 20 x 20 x 10 cm cement concete block 1:3:6 (1 cement : 3 coarse :6 graded aggregate of nominal size 20 mm ) as per standard with 20x20 mm sqm. bar. D.S.R. - 19.15.1
16
-
334.71
Same as do But for Rain water Rechargewell
11
-
329.78
a) Pipes 80mm to 300mm diameter.
80
-
284.48
P/L and jointing glazed stone ware in pipes in proper slope class sp-1 with stiff mixture of cement mortar in the proportion of 1:1 ( cement : coarse sand ) including testing of joints etc complete a) 100mm diameter
135
-
152
b) 150mm diameter
225
-
218.5
a) 100mm diameter RWR
80
-
247.65
Laying cement concrete 1:5:10(1 cement :2coarse sand :4graded stone aggregate) in haunching sw pipes incl concrete around the pipes and curing complete a) 100mm diameter S.W.R. Pipe
135
-
403.75
b) 100mm diameter RWR
80
-
647.7
c) 150mm diameter S.W.R. Pipe
225
-
636.5
Providing and fixing square mouth S.W.R. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design. a) 150 x 100 mm. size P type With Sewer bricks conforming to IS : 4885
17
-
1225.5
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80X50cms including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg) With FPS bricks of class designation 75 With common burnt clay F.P.S. (non modular) bricks ofclass designation 7.5.
10
-
4804.97
a For Sewer Line
18
-
6935
c) Extra for depth of man hole size 90x80 cm
6
-
3904.5
Supply & fixing of medium quality R.C.C. Manhole cover with frame complete.HD.-20-Circular shape ,560 int. dia. D.S.R. - 19.19.3.1
2
-
1166.57
b) M.D.-10- square shape ,450 int. dia. D.S.R.- 19.19.2.1
2
-
975.59
c) M.D. -10- Circular shape 500mm internal diameter
1
-
808.92
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.
2
-
20040.36
Supply and stacking of graded stone aggregate of 45-90mm size
1.21
-
1437.28
Supply and stacking of stone chippings of 11.20mm size
1.82
-
1545.42
Supply and stacking of moorum at site
1.82
-
630.98
Wiring points for light with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable heavy PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box, piano type & ceiling (a) on 3mm thick phenolic paminated backalite sheet ect complete in all respect as directed including matching colour wash. arose/angle/batten holder
260
-
579.5
Same as item No. (1) but for fan and light duty exhaust fan.
142
-
637.45
Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc.
122
-
310.65
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly laid in slab alongwith reinforcemet before concreting and partly concealed in wall one no 14 SWG copper earth continuity wire etc, complete in all respects including matchning colour wash.
140
-
190
Supply and wiring of submiain with two number 4 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wiere including matching colour wash etc. complete in all respect.
160
-
209.95
Supply and wiring of submiain with 4 number 10 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with two number 10 SWG copper earth continuity wiere including matching colour wash etc. complete in all respect.
140
-
605.15
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects.
108
-
133
S/F of single light wall bracket on matching M.D.F.E.G. board base etc. complete in all respects.
7
-
1567.5
Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge.
-
-
-
40 Amp. 4 Pole MCB
8
-
1619.75
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
34
-
185.25
Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot weeldeed Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
110
-
142.5
Fan sheets
45
-
51.3
Round sheets
45
-
19.95
Supply fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
110
-
253.65
Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system BEE 5 star rated-1200 mm sweep
108
-
1710
Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AA)
195
-
969
Supply & fixing of Led Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA)
20
-
589
Supply & fixing of recess/ surface/ pendant mounting round 6Watt LED Down lighter having powder coated die cast aluminium housing with heat sink diffuser/ Reflector and driver set complete in all respect. CAT AAA
8
-
731.5
Supply & fixing of factory wired integral LED flood light luminaries with die cast aluminium housing built with driver set suitable for 40 to 50 watt confirming to IP 65 protection complete in all respect. CATT AA
12
-
2052
Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects.4 Way TPN
4
-
2745.5
6 Way TPN
6
-
3087.5
Supply and fixing of 6Amp to 32 Amp(10 KA) MCB in existing MCB, DB complete with connections as required.
90
-
247
Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work.
41
-
593.75
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects.
50
-
23.75
Supply and burying of safe earthing electrode T-39 (hot-dip galvanized), length up to 3000mm, outer pipe 76mm thinner dia 38mm terminal dia 12mm, outer GI pipe of 16 SWG and ineer GI pipe of 12 SWG with hot dip galvanizatin up to 100 micron filled with crystalline conductive property with 50kgs activated soil cabablo of reducing the soil resistivity with good mixture of retaining capcity along with 30cm square CI. frame with hinged cover & masonary housing, from electrode terminal to switch board, cost of 25x3 GI. strip will be extra
3
-
12065
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
80
-
85.5
Supply and fixing of one number 8 SWG G.I wire in 15mm dia. G.I pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
40
-
190
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.(a) 25 sqmm 4 core
105
-
354.35
16 sqmm 4 core
25
-
325.85
10 sqmm 4 core
25
-
310.65
6 sqmm 2 core
20
-
262.2
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire (a) 25 sqmm 4 core
14
-
116.85
(b) 16 sqmm 4 core
10
-
82.65
( c ) 10 sqmm 4 core
10
-
82.65
(d) 10 sqmm 2 core
20
-
76
(e) 6 sqmm 2 core
8
-
72.2
Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.(b) 95 Sq.mm
2
-
83.6
( b )25 Sq.mm
18
-
25.65
(c ) 16 Sq.mm
10
-
19.95
(d) 10 sqmm
10
-
19
(e) 6 sqmm
10
-
17.1
Supply and Erection of Febricated and Wired Electricl Control Panel With TPN MCCBS 4 Pole 36 KA AMP Wtth Digital Metering System For Phase to Phase Voltage, single phase voltage, current & other parameters, KVA, PF, KW etc. with electrolytic aluminium bus bars as per IS 8623 or above insulated with heat shrink sleeving all outgoings of 100 amp & shall have an ammeter all complete with all respect. (a) Incoming 200 Amp. MCCB-1 No Outgoing 100 Amp. MCCB-2 No Cat B. Pannel Cubile Type
2
-
108300
S & F of 63 Amp TP MCB (10KA) C Curve.
6
-
1700.5
S & F of 40 Amp TP MCB (10KA) C Curve.
4
-
1691
Providing and Laying unplastisized rigid PVC pipe conforming to IS:13592 type A including jointing , cutting and making good the walls & floors as per requirement.150mm
50
-
614.65
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required 300mm sweep.
34
-
2232.5
Supply and fixing exaust louvers 12 inch dia. complete as required
34
-
292.71
External W/S arrangements with T.W. boring of 150 mm dia with 110 mm dia P.V.C. pipe assembly, 2.00 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangements etc . 2 Nos Borwell 110MM PVC casing pipe of ISI mark.
120
-
380
110MM PVC slotted pipe of ISI mark.
40
-
522.5
P/ F 50mm GI pipe (B) class.
90
-
285
Nylon mesh for filter.
2
-
475
Plastic dori.
2
-
285
Solvent cement.
2
-
332.5
110mm End cap.
2
-
285
110mm Submersible cap.
2
-
285
50mm MS clamp (Heavy).
2
-
950
50mmGI elbow.
2
-
190
50mm X 110mm GI nipple.
2
-
237.5
2 HP 9 Stage submersible pump of ISI mark with automatic panel.
2
-
28500
2.5 sqm. Submersible cable.
140
-
285
Drilling charges for 6" dia tubewell.
160
-
665
Pea Gravel.
2.5
-
2375
2" MS socket.
8
-
285
Cartage of material upto site.
2
-
1900
Fixing testing and commissioning of Pumpset with lowering & Electric wiring with starter etc. complete as required.
2
-
4750
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitablemethod prescribed in IS: 2800 (part I), including collecting samples fromdifferent strata, preparing and submitting strata chart/ bore log, includinghire & running charges of all equipments, tools, plants & machineriesrequired for the job, all complete as per direction of Engineer -in-charge,upto 90 metre depth below ground level.300 mm dia
15
-
400.16
Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings& accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia
15
-
539.55
150 mm nominal size dia(slotted pipe)
11
-
582.81
Supply and fixing of nylon jali around the slotted pipes complete as required.
1
-
475
Transport of boring tools other required equipments and installation at site.
1
-
712.5
Supply & fixing of ISI marked portable fire extinguishers, complete with internal charge and wall bracket along with supply of all materials and labour for proper completion of work. a) ISI Marked IS : 2878 & TAC Approved CO2 type. 4.5 Lt.capacity
6
-
11381
b) ISI Marked IS : 15683 & TAC Approved ABC type. 6.00 kg. Capacity
7
-
8645
S/F of Fire Bucket, round bottom made of G. I. sheet 9-11 Ltr. capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge.
20
-
465.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements