Uttar Pradesh Projects Corporation Limited Tender

If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.

Uttar Pradesh Projects Corporation Limited - UPPCL Tender

Works

Civil And Construction

Building Construction

Eprocure

Amethi, Uttar Pradesh

Opening Date24 Feb 2024

Closing Date4 Mar 2024

Tender Amount₹ 15,33,33,000

Notes

Download

Costs

EMD
₹ 30,67,000
Document Cost
₹ 17,700
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
2024_UPPRC_904894_1
Bid Award Id
View
Tender No
70/GM-3/UPPCL/2023-24 DATED 17.02.2024
Tender Authority
Uttar Pradesh Projects Corporation Limited View
Purchaser Address
-
Website
http://http://upprojects.org/

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Download All

Tender Notice-16.5 MBTendernotice_1.pdf

Proposed Construction of New Block (Paint and P M T Block0 as per AICTE Norms at Sanjay Gandhi Govt. Polytechnic, Jagdishpur District Amethi (U.P.)

BOQ-11.1 MBBOQ_1559385.xls

BOQ

Document-26.5 MBBID_70.pdf

BID Documents

Document-147.7 kBTender_Detail_2024...Tender_Detail_2024_UPPRC_904894_1.html

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Quantity3322.97

Rate1640550

Amount 493.7

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Quantity326.93

Rate1569568

Amount 4800.93

Coarse Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.

Quantity2913.75

Rate8363132

Amount 2870.23

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Quantity2083.87

Rate455367

Amount 218.52

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level

Quantity-

Rate-

Amount -

R.C.C. work in Plinth beam

Quantity130.71

Rate875589

Amount 6698.72

R.C.C. work in Footing

Quantity483.63

Rate3239668

Amount 6698.72

R.C.C. work in Column

Quantity94.72

Rate634522

Amount 6698.72

Quantity-

Rate-

Amount -

R.C.C. work in Lintel

Quantity23.9

Rate166089

Amount 6949.37

R.C.C. work in Slab

Quantity880.52

Rate6119059

Amount 6949.37

R.C.C.work in Beams

Quantity459.8

Rate3195320

Amount 6949.37

R.C.C.work in Column

Quantity348.25

Rate2420125

Amount 6949.37

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity204.81

Rate1029506

Amount 5026.64

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)

Quantity189.94

Rate54999

Amount 289.56

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Quantity3729.29

Rate384116

Amount 103

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Quantity-

Rate-

Amount -

Ground Floor

Quantity472.11

Rate3029836

Amount 6417.65

First Floor

Quantity469.45

Rate3012765

Amount 6417.65

Second Floor

Quantity436.84

Rate2803486

Amount 6417.65

Third Floor

Quantity129.45

Rate830764

Amount 6417.65

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Quantity-

Rate-

Amount -

Ground Floor

Quantity345.04

Rate273282

Amount 792.03

First Floor

Quantity353.89

Rate280292

Amount 792.03

Second Floor

Quantity241.66

Rate191399

Amount 792.03

P/F T.M.T.Fe-500 Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

Quantity-

Rate-

Amount -

Upto P.L

Quantity980.52

Rate7452942

Amount 7601.01

Above P.L

Quantity2642.03

Rate20082096

Amount 7601.01

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

Quantity3729.29

Rate903234

Amount 242.2

15 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

Quantity-

Rate-

Amount -

Ground Floor

Quantity3593.36

Rate1001217

Amount 278.63

First Floor

Quantity3491.61

Rate972867

Amount 278.63

Second Floor+Mumty

Quantity3422.09

Rate953496

Amount 278.63

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

Quantity-

Rate-

Amount -

Ground Floor

Quantity1765.16

Rate427521

Amount 242.2

First Floor

Quantity1630.21

Rate394836

Amount 242.2

Second Floor+Mumty

Quantity2038.94

Rate493831

Amount 242.2

Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge.

Quantity-

Rate-

Amount -

G.F+TERRACE

Quantity23078.91

Rate1636294

Amount 70.9

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Quantity-

Rate-

Amount -

Ground Floor

Quantity1190.75

Rate1303668

Amount 1094.83

First Floor

Quantity1126.54

Rate1233369

Amount 1094.83

Second Floor

Quantity972.36

Rate1064568

Amount 1094.83

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Quantity-

Rate-

Amount -

Ground Floor

Quantity82.16

Rate93982

Amount 1143.89

First Floor

Quantity75.07

Rate85871

Amount 1143.89

Second Floor

Quantity60.35

Rate69033

Amount 1143.89

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Quantity-

Rate-

Amount -

MACHINE ROOM

Quantity17.72

Rate24330

Amount 1373.08

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Quantity-

Rate-

Amount -

MACHINE ROOM

Quantity7.12

Rate11815

Amount 1659.54

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Quantity-

Rate-

Amount -

Ground Floor

Quantity419.17

Rate328713

Amount 784.2

First Floor

Quantity387.91

Rate304199

Amount 784.2

Second Floor

Quantity425.69

Rate333826

Amount 784.2

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Quantity238.76

Rate103352

Amount 432.87

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Quantity-

Rate-

Amount -

(a) Single leaf

Quantity67.2

Rate113318

Amount 1686.28

(b) Double leaf

Quantity179.34

Rate302417

Amount 1686.28

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On Both side only

Quantity493.08

Rate332222

Amount 673.77

24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanise+d M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). sqm

Quantity66.15

Rate138429

Amount 2092.66

Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineerin- charge.

Quantity207.9

Rate111920

Amount 538.34

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.

Quantity-

Rate-

Amount -

M.S. Hold fast for doors and windows

Quantity356.4

Rate43352

Amount 121.64

M.S. Grill

Quantity986.94

Rate120051

Amount 121.64

Z-Section

Quantity1092.6

Rate132903

Amount 121.64

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Quantity5547.75

Rate763203

Amount 137.57

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mmboth having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mmboth having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window upto 1.8 sqm).

Quantity550.88

Rate4221872

Amount 7663.87

Fixing of door, windows / ventilators chaukhats in position.

Quantity-

Rate-

Amount -

(a) Door chaukhats

Quantity99

Rate14107

Amount 142.5

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer

Quantity-

Rate-

Amount -

Ground Floor

Quantity3593.36

Rate470155

Amount 130.84

First Floor

Quantity3491.61

Rate456842

Amount 130.84

Second Floor

Quantity3422.09

Rate447746

Amount 130.84

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Quantity-

Rate-

Amount -

Ground Floor

Quantity1765.16

Rate212860

Amount 120.59

First Floor

Quantity1630.21

Rate196587

Amount 120.59

Second Floor

Quantity2038.94

Rate245875

Amount 120.59

Quantity-

Rate-

Amount -

Ground Floor

Quantity2161.41

Rate282798

Amount 130.84

First Floor

Quantity1859.35

Rate243277

Amount 130.84

Second Floor

Quantity1951.28

Rate255305

Amount 130.84

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Quantity-

Rate-

Amount -

Ground Floor

Quantity7519.93

Rate827041

Amount 109.98

First Floor

Quantity6981.17

Rate767789

Amount 109.98

Second Floor

Quantity7412.31

Rate815205

Amount 109.98

Providing and fixing 150 mm bright finished floor stainless steel door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.

Quantity99

Rate18939

Amount 191.31

Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

Quantity99

Rate45144

Amount 456

Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete

Quantity-

Rate-

Amount -

(a) 300mm x 10mm

Quantity99

Rate19750

Amount 199.5

(b) 250 mm x 10mm

Quantity99

Rate15518

Amount 156.75

Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm

Quantity198

Rate16633

Amount 84.01

Providing & laying "brick Coba" 120mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete for proper completion of work.

Quantity2311.72

Rate2744635

Amount 1187.27

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Quantity257.19

Rate41011

Amount 159.46

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (weights not less than 10 kg/ sqm)

Quantity605.51

Rate454338

Amount 750.34

Supplyand fixing Galvanized Mosquitos proof heavy quality S.S. Wire gauge heavy quality over window sandinc luding supply of teak wood batten 8cm.x1.cm.(3"x3/8")/ flat iron25mm.x4mm.andinc luding supply of necessary screw sall materials,labour,Tools&plantsetc.required for proper completion of the work.

Quantity550.88

Rate476764

Amount 865.46

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Quantity2478.8

Rate1115188

Amount 449.89

Construction of drain along with apron 150X150mm

Quantity265.29

Rate170700

Amount 643.46

Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade pigment using white cement.

Quantity373.34

Rate403573

Amount 1080.98

Providing & laying of light cinder filling under floor of toilets & other sunken roofs.

Quantity68.98

Rate131062

Amount 1900

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Quantity229.61

Rate99852

Amount 434.88

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.

Quantity2276.07

Rate1239024

Amount 544.37

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Quantity-

Rate-

Amount -

Ground Floor

Quantity839.51

Rate1885463

Amount 2245.91

First Floor

Quantity641.05

Rate1439740

Amount 2245.91

Second Floor

Quantity620.39

Rate1393340

Amount 2245.91

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Quantity23.72

Rate191238

Amount 8062.35

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

Quantity347.69

Rate74774

Amount 215.06

Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.

Quantity13.53

Rate75098

Amount 5552.58

Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that ccommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063) Floor Joint of 100 mm gap

Quantity83.5

Rate376193

Amount 4505.31

Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical isplacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.)Roof Joint of 100 mm gap

Quantity29.74

Rate125460

Amount 4218.58

Providing and fixing of expansion joint system elated with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimalexposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).Wall Joint of 100 mm gap

Quantity114

Rate426279

Amount 3739.29

Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. 200 mm wide.

Quantity197.5

Rate119671

Amount 605.93

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Quantity974.6

Rate53846

Amount 55.25

Centering and shuttering including strutting, propping etc. and removal of form for:

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns, etc. for mass concrete

Quantity520.32

Rate143806

Amount 276.38

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Quantity5853.04

Rate3037727

Amount 519

Suspended floors, roofs, landings, balconies and access platform.

Quantity6994.66

Rate4571010

Amount 653.5

Columns, Pillars, Piers, Abutments, Posts and Struts

Quantity4240.29

Rate2872796

Amount 677.5

Main Building (Plumbing Work) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

Quantity-

Rate-

Amount -

W.C. pan with ISI marked white solid plastic seat and lid

Quantity45

Rate206640

Amount 4592

Providing & fixing toilet paper holder

Quantity-

Rate-

Amount -

C.P. brass

Quantity45

Rate25489

Amount 566.43

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Quantity45

Rate11073

Amount 246.07

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Quantity-

Rate-

Amount -

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Quantity57

Rate89437

Amount 1569.08

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Quantity57

Rate41570

Amount 729.3

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Quantity57

Rate9317

Amount 163.47

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Quantity57

Rate4477

Amount 78.55

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Quantity57

Rate64594

Amount 1133.24

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern, jet & kitchen sink)

Quantity-

Rate-

Amount -

15 mm nominal bore

Quantity150

Rate60712

Amount 404.75

Providing and fixing uplasticised PVC connection pipe with brass unions :

Quantity-

Rate-

Amount -

45 cm length 15 mm nominal bore

Quantity105

Rate7233

Amount 68.89

Providing & fixing PVC waste pipe for sink including PVC waste fittings Complete

Quantity-

Rate-

Amount -

Flexible Pipe 32mm Dia

Quantity46

Rate3875

Amount 84.26

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :

Quantity-

Rate-

Amount -

Size 600x450x200 mm

Quantity46

Rate213509

Amount 4641.51

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity45

Rate16073

Amount 357.18

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Quantity-

Rate-

Amount -

15mm nominal bore

Quantity52

Rate29280

Amount 563.08

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Quantity16

Rate89976

Amount 5623.55

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Quantity-

Rate-

Amount -

Granite Stone of approved shade

Quantity6.6

Rate18847

Amount 2855.65

Providing and fixing of Kent Elite Plus Water Purifier (RO+UV+UF+TDS Control) with flow rate (50L/hr) including all its accessories, complete in all respect including testing etc.

Quantity3

Rate117904

Amount 39301.5

Providing and fixing of Water Cooler (Voltas Make) including all its accessories, complete in all respect including testing etc.

Quantity3

Rate83405

Amount 27801.75

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. For Internal Toilet

Quantity-

Rate-

Amount -

15 mm nominal outer dia Pipes

Quantity32.09

Rate11256

Amount 350.84

20 mm nominal outer dia Pipes

Quantity284.51

Rate107797

Amount 378.89

25 mm nominal outer dia Pipes

Quantity127.65

Rate56430

Amount 442.07

32 mm nominal outer dia Pipes

Quantity20.7

Rate10785

Amount 521.04

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

Quantity-

Rate-

Amount -

20 mm nominal bore

Quantity107.64

Rate25413

Amount 236.1

25 mm nominal bore

Quantity189.06

Rate53503

Amount 283

32 mm nominal bore

Quantity182.16

Rate66597

Amount 365.6

Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on Wall Terrace loop & Tank Filling Pipe

Quantity-

Rate-

Amount -

50 mm nominal bore

Quantity49.5

Rate36573

Amount 738.85

65 mm nominal bore (i/c two coat of synthetic enamel paint)

Quantity198

Rate161734

Amount 816.84

Supply, fixing, testing and commissioning of following Electrical Actuator Single Phase 220V AC Operated Wafer Type Butterfly Valve - IP65CB - 230VAC, as per specifications:- Lehry Make Automatic OHT Level Control System Consist of Following Items :- 1) LEHRY Make On-Off Type Electrical Actuator Single Phase 220V AC Operated Wafer Type Butterfly Valve with CI Body & SS Disc 2) Level Float Switch- 5M 3) Control Box (a) IP 65 Finishing(250 x 160 x 115)mm (b) LED Lamps: Tank FULL, Tank EMPTY, Power (c) Power supply toggle switch (d) Accepts 230V Single Phase power supply and provides 24VAC to float switch and 230VAC to valve coil. (e) Accepts NO/NC feedback from float switch.

Quantity-

Rate-

Amount -

50mm

Quantity1

Rate44293

Amount 44293.75

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :

Quantity-

Rate-

Amount -

50mm diameter pipe

Quantity49.5

Rate1779

Amount 35.94

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : For vertical pipe connection with terrace ringmain

Quantity-

Rate-

Amount -

20 mm nominal bore

Quantity6

Rate2283

Amount 380.54

25mm nominal bore

Quantity13

Rate5702

Amount 438.65

32mm nominal bore

Quantity12

Rate5832

Amount 486.01

Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks.

Quantity-

Rate-

Amount -

25mm dia.

Quantity6

Rate7096

Amount 1182.75

50mm dia.

Quantity5

Rate7362

Amount 1472.5

65mm dia.

Quantity2

Rate3230

Amount 1615

100mm dia.

Quantity1

Rate2351

Amount 2351.25

150mm dia.

Quantity2

Rate6792

Amount 3396.25

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Quantity-

Rate-

Amount -

110 mm dia (for rain water)

Quantity368

Rate97880

Amount 265.98

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Quantity-

Rate-

Amount -

Single Push Fit Coupler 110 mm dia

Quantity99.67

Rate8963

Amount 89.93

Single tee with door 110x110x110 mm

Quantity23

Rate3795

Amount 165.02

Plain bend 87.5 deg 110 mm dia

Quantity46

Rate4874

Amount 105.96

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Quantity-

Rate-

Amount -

110 mm dia

Quantity147.2

Rate38519

Amount 261.68

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Quantity23

Rate4834

Amount 210.2

Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring.

Quantity-

Rate-

Amount -

Single socketed pipes. Internal Toilet (Soil & Waste Pipe) 75 mm

Quantity295

Rate137322

Amount 465.5

Single socketed pipes. Internal Toilet (Soil & Waste Pipe) 110 mm

Quantity221

Rate146965

Amount 665

Exposed on Wall (Soil & Waste Pipe) 110 mm

Quantity272

Rate180880

Amount 665

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.

Quantity-

Rate-

Amount -

Bend without door (87.5°) 110mm bend

Quantity58

Rate14326

Amount 247

Bend without door (45°) 100mm

Quantity45

Rate9191

Amount 204.25

Bend without door (45°) 75mm

Quantity131

Rate16800

Amount 128.25

Y' Fitting without door 100mm

Quantity58

Rate22591

Amount 389.5

Y' Fitting without door 75mm

Quantity131

Rate28623

Amount 218.5

Reduced 'Y' Fitting without door 100mm x 75mm

Quantity10

Rate3135

Amount 313.5

Single Tee without door 110mm

Quantity58

Rate20111

Amount 346.75

Single Tee without door 75 mm

Quantity131

Rate27379

Amount 209

Single Tee with door 110mm

Quantity16

Rate6384

Amount 399

Reduced Tee with door 110mm x 75mm

Quantity31

Rate10896

Amount 351.5

Coupler 110mm

Quantity73.67

Rate15396

Amount 209

Clean Out Plug (COP) 110mm

Quantity18

Rate3420

Amount 190

Clean Out Plug (COP) 75 mm

Quantity35

Rate4655

Amount 133

Vent Cowl 110mm

Quantity17

Rate1453

Amount 85.5

Providing, fixing, jointing and testing, unplasticized PVC pipes - 10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc.

Quantity-

Rate-

Amount -

For Wash basin & Urinal 50mm dia. Pipe

Quantity34.5

Rate10815

Amount 313.5

For Wash basin & Urinal 32mm dia. pipe

Quantity128.69

Rate21393

Amount 166.25

Elbow (90°) 50mm

Quantity16

Rate1216

Amount 76

Elbow (90°) 32mm

Quantity114

Rate3790

Amount 33.25

Elbow (45°) 50mm

Quantity10

Rate665

Amount 66.5

Elbow (45°) 32mm

Quantity33

Rate1410

Amount 42.75

T fitting 50mm

Quantity10

Rate950

Amount 95

T fitting 32mm

Quantity33

Rate1410

Amount 42.75

Providing, fixing, jointing and testing , of PVC Multi Floor Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge.

Quantity-

Rate-

Amount -

110mm x 75mm x 50mm/40mm (Toilet)

Quantity43

Rate44730

Amount 1040.25

Providing, fixing, jointing and testing , of PVC Nahani Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge.

Quantity-

Rate-

Amount -

110mm x 75mm (Toilet)

Quantity88

Rate86108

Amount 978.5

Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony)

Quantity131

Rate18184

Amount 138.81

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :

Quantity-

Rate-

Amount -

150 x 100mm size P-type with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity12

Rate23124

Amount 1927

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:

Quantity-

Rate-

Amount -

100 mm diameter

Quantity18

Rate5627

Amount 312.64

Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.

Quantity-

Rate-

Amount -

All kind of soil pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.

Quantity120

Rate29782

Amount 248.19

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:

Quantity-

Rate-

Amount -

100mm dia SW pipe

Quantity120

Rate81591

Amount 679.93

Main Bilding (WATER SUPPLY) Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.

Quantity-

Rate-

Amount -

Up to 1.50 m depth pipes 80 mm to 300 mm diameter

Quantity253

Rate62792

Amount 248.19

Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered)

Quantity-

Rate-

Amount -

Depth not exceeding 1.5 meter

Quantity379.5

Rate19271

Amount 50.78

Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete.

Quantity-

Rate-

Amount -

150 mm. dia. RCC Pipes

Quantity253

Rate99219

Amount 392.17

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design

Quantity-

Rate-

Amount -

150 mm. dia. RCC Pipes

Quantity253

Rate132501

Amount 523.72

Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With common burnt clay FPS (non modular) bricks of class designation 75

Quantity-

Rate-

Amount -

(i) For Sewer Line

Quantity11

Rate99004

Amount 9000.37

Extra for depth for manholes: Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5

Quantity5.5

Rate34209

Amount 6219.93

Extra for depth for manholes: Inside size 90x120cms and 90cms deep including CI cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58kg). With common burnt clay FPS (non modular) bricks of class designation 75

Quantity-

Rate-

Amount -

(i) For Sewer Line

Quantity7

Rate130269

Amount 18609.95

Extra for depth for manholes: Size 90x120cm with With common burnt clay FPS (non modular) bricks of class designation 7.5

Quantity3.5

Rate26111

Amount 7460.4

Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.

Quantity36

Rate14048

Amount 390.23

Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work)

Quantity-

Rate-

Amount -

65mm nominal bore.

Quantity19.8

Rate12511

Amount 631.9

50mm nominal bore.

Quantity71.5

Rate38405

Amount 537.14

Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.

Quantity-

Rate-

Amount -

65mm nominal bore.

Quantity1

Rate1227

Amount 1227.82

50mm nominal bore.

Quantity1

Rate723

Amount 723.56

Constructing masonry Chamber 90X90X100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand ) for sluice valve, with C.I. surface box 100mm, top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design :

Quantity-

Rate-

Amount -

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Quantity1

Rate13317

Amount 13317.93

SEPTIC TANK & SOAK PIT Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-incharge.

Quantity-

Rate-

Amount -

In all kind of soil upto 1.5m depth

Quantity47.38

Rate5926

Amount 125.1

In all kind of soil upto 1.5m to 3.0m. depth

Quantity45.09

Rate9669

Amount 214.46

In all kind of soil upto 3.0m to 4.5m. depth

Quantity12.02

Rate3653

Amount 303.83

Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 40mm nominal size)

Quantity4.69

Rate26013

Amount 5552.58

Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)

Quantity19.51

Rate101368

Amount 5194.66

Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.

Quantity3.98

Rate25354

Amount 6375.22

Suspended floors, roofs, landings, balconies and access platform.

Quantity26.52

Rate17327

Amount 653.5

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

Quantity3.12

Rate23550

Amount 7548.15

12mm cement plaster on rough side of mix 1:3 (1 cement : 3 coarse sand)

Quantity82.6

Rate25569

Amount 309.57

Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.

Quantity12

Rate4606

Amount 383.89

Providing and fixing C.I. tee at the inlet and outlet of septic tank.

Quantity2

Rate875

Amount 437.67

Providing & fixing 75mm dia vent pipes.

Quantity1

Rate736

Amount 736.31

Providing & fixing of 75mm dia cast iron terminal guard.

Quantity1

Rate240

Amount 240.12

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.

Quantity-

Rate-

Amount -

M.D. -10- Circular shape 500mm internal diameter

Quantity2

Rate1652

Amount 826.42

M.D. -2.5- Circular shape 450mm internal diameter

Quantity4

Rate3297

Amount 824.34

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.

Quantity-

Rate-

Amount -

With F.P.S. bricks

Quantity2

Rate37863

Amount 18931.61

Main Building ( Electrical Work) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Quantity-

Rate-

Amount -

Group - C

Quantity1102

Rate1189719

Amount 1079.6

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Quantity-

Rate-

Amount -

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Quantity3973.5

Rate681336

Amount 171.47

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Quantity108

Rate21857

Amount 202.38

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Quantity3477.6

Rate854794

Amount 245.8

2 X 6 sq. mm + 1 X 4 sq. mm earth wire

Quantity162

Rate52337

Amount 323.07

2 x 16 sq.mm + 1 x 6 sq.mm. earth wire

Quantity39

Rate22157

Amount 568.13

4 x 6 sq.mm + 2 x 6 sq.mm. earth wire

Quantity150

Rate83233

Amount 554.89

4 x 10 sq.mm + 2 x 6 sq.mm. earth wire

Quantity450

Rate332820

Amount 739.6

4 x 16 sq.mm + 2 x 6 sq.mm. earth wire

Quantity468

Rate470120

Amount 1004.53

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Quantity89

Rate31241

Amount 351.03

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Quantity161

Rate69431

Amount 431.25

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Quantity9

Rate4815

Amount 535.02

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Quantity297

Rate80653

Amount 271.56

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Quantity184

Rate5416

Amount 29.44

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Quantity689

Rate44116

Amount 64.03

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Quantity781

Rate68392

Amount 87.57

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Quantity297

Rate48226

Amount 162.38

Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Quantity297

Rate10053

Amount 33.85

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required

Quantity-

Rate-

Amount -

Upto 450 mm sweep

Quantity24

Rate7947

Amount 331.16

Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes.

Quantity24

Rate3656

Amount 152.34

Supply of surface mounting 2x2 feet 24 to 30W LED , suitable for 24Hr Continuous Operation, 3000-6000 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.

Quantity24

Rate90310

Amount 3762.95

Supply of LED 4ft 40W LED Tube light with a nominal system lumen output of 4000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 3000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 42W (including driver).Including connection with 1.5 sqmm FRLS PVC insulated copper conductor

Quantity397

Rate912703

Amount 2299

Supply of LED 4ft Batten with a nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 4000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 21W (including driver).Including connection with 1.5 sqmm FRLS PVC insulated copper conductor.

Quantity238

Rate359499

Amount 1510.5

Supply of Surface mounting round 6 Watt 10 Watt , LED Down Lighter, suitable for 24Hr Continuous Operation, 660-1100 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.

Quantity83

Rate122059

Amount 1470.6

Supplying of Bulkhead type light fitting complete with, wire guard, holder, electronic ballast 1 x 10 W lamp including connections etc.Including connection with 1.5 sqmm FRLS PVC insulated copper conductor as required.

Quantity9

Rate14304

Amount 1589.35

Supplying of LED mirror light luminaire with 10W watt complete with electronic ballast, lamp including connection etc. complete as required, Including connection with 1.5 sqmm FRLS PVC insulated copper conductor.

Quantity30

Rate32062

Amount 1068.75

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan

Quantity297

Rate596693

Amount 2009.07

Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required.

Quantity-

Rate-

Amount -

300mm EXHAUST FAN

Quantity24

Rate54742

Amount 2280.95

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required

Quantity-

Rate-

Amount -

100 A,30KA,FPMCCB

Quantity7

Rate39784

Amount 5683.52

125 A,36KA,FPMCCB

Quantity4

Rate24164

Amount 6041.18

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Quantity-

Rate-

Amount -

6 way Double door

Quantity21

Rate76870

Amount 3660.48

8 way Double door

Quantity11

Rate48303

Amount 4391.25

Supplying and fixing following way surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note : Vertical type MCB TP DB is normally used where 3 phase outlet are required.)

Quantity-

Rate-

Amount -

4 way (4 + 12), Double door

Quantity9

Rate49754

Amount 5528.24

8 way (4 + 24), Double door

Quantity5

Rate37403

Amount 7480.65

Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required

Quantity-

Rate-

Amount -

40 amps 4P MCB

Quantity55

Rate133603

Amount 2429.15

63 amps 4P MCB

Quantity26

Rate65652

Amount 2525.1

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. As required.

Quantity-

Rate-

Amount -

25 amps

Quantity90

Rate134320

Amount 1492.45

40 amps

Quantity6

Rate11665

Amount 1944.31

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Quantity-

Rate-

Amount -

Single pole

Quantity283

Rate53317

Amount 188.4

Triple pole and neutral

Quantity5

Rate4518

Amount 903.71

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Quantity167

Rate1598

Amount 9.57

Supplying and fixing 4P sheet steel enclosure on surface/ recess complete with connections, testing and commissioning etc. as required.

Quantity12

Rate7763

Amount 646.95

Quantity-

Rate-

Amount -

90 mm dia (OD-90 mm & ID-76 mm nominal)

Quantity10

Rate1251

Amount 125.11

Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports. The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.

Quantity-

Rate-

Amount -

The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm Phase to neutral-minimum 15mm SUB PANEL -LIGHT GROUND FLOOR INCOMING 1No. Of 160 Amps FP MCCB of 25KA breaking capacity Metering : 1 Set of CT's one of 160/ 5Amp ratio for Multifunction Meter One (1) Set of Phase Indication Lamp. BUS BAR 1 Set of 200 Amps TPN Aluminium Bus Bars OUTCOMING 100 Amps FP MCCB of 25KA - 3 No SPARE & SPACE- 2 No Panel described as above

Quantity1

Rate105002

Amount 105002.55

SUB PANEL -POWER GROUND FLOOR INCOMING 1No. Of 200 Amps FP MCCB of 25KA breaking capacity Metering : 1 Set of CT's one of 200/ 5Amp ratio for Multifunction Meter One (1) Set of Phase Indication Lamp. BUS BAR 1 Set of 250 Amps TPN Aluminium Bus Bars OUTCOMING 100 Amps FP MCCB of 25KA - 4 No SPARE & SPACE- 2 No Panel described as above

Quantity1

Rate120472

Amount 120472.35

SUB PANEL - LIGHT FIRST FLOOR INCOMING 1No. Of 160 Amps FP MCCB of 25KA breaking capacity Metering : 1 Set of CT's one of 160/ 5Amp ratio for Multifunction Meter One (1) Set of Phase Indication Lamp. BUS BAR 1 Set of 200 Amps TPN Aluminium Bus Bars OUTCOMING 100 Amps FP MCCB of 25KA - 2 No 63 Amps FP MCCB of 25KA - 1 No SPARE & SPACE- 2 No Panel described as above

Quantity1

Rate105002

Amount 105002.55

SUB PANEL -POWER FIRST FLOOR INCOMING 1No. Of 200 Amps FP MCCB of 25KA breaking capacity Metering : 1 Set of CT's one of 200/ 5Amp ratio for Multifunction Meter One (1) Set of Phase Indication Lamp. BUS BAR 1 Set of 250 Amps TPN Aluminium Bus Bars OUTCOMING 125 Amps FP MCCB of 25KA - 2 No 100 Amps FP MCCB of 25KA - 2 No SPARE & SPACE- 2 No Panel described as above

Quantity1

Rate125459

Amount 125459.85

SUB PANEL - LIGHT SECOND FLOOR INCOMING 1No. Of 160 Amps FP MCCB of 25KA breaking capacity Metering : 1 Set of CT's one of 160/ 5Amp ratio for Multifunction Meter One (1) Set of Phase Indication Lamp. BUS BAR 1 Set of 200 Amps TPN Aluminium Bus Bars OUTCOMING 100 Amps FP MCCB of 25KA - 2 No 63 Amps FP MCCB of 25KA - 1 No SPARE & SPACE- 2 No Panel described as above

Quantity1

Rate109990

Amount 109990.05

SUB PANEL - POWER SECOND FLOOR INCOMING 1No. Of 160 Amps FP MCCB of 25KA breaking capacity Metering : 1 Set of CT's one of 160/ 5Amp ratio for Multifunction Meter One (1) Set of Phase Indication Lamp. BUS BAR 1 Set of 200 Amps TPN Aluminium Bus Bars OUTCOMING 125 Amps FP MCCB of 25KA - 2 No 63 Amps FP MCCB of 25KA - 1 No SPARE & SPACE- 2 No Panel described as above

Quantity1

Rate109990

Amount 109990.05

ELEVATOR PANEL Incoming : One (1) No 80 Amp. 4P MCCB of 25KA Breaking capacity Metering : 1 Set of CT's one of 80/ 5Amp ratio for Multifunction Meter One (1) Set of Phase Indication Lamp. Bus Bar : One (1) No. 100 Amp.TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided. 2 No.63 Amp 4P MCCB. (25 KA) 2 No.63 Amp DP MCB. (10 KA) SPARE & SPACE Panel described as above

Quantity1

Rate89775

Amount 89775

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each

Quantity1

Rate197

Amount 197.96

Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required.

Quantity4

Rate21995

Amount 5498.81

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Quantity180

Rate19074

Amount 105.97

Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.

Quantity120

Rate21547

Amount 179.56

Supplying, drawing, connecting and testing of 0.5 mm dia annealed copper conductor PVC insulated PVC sheathed telephone wire in existing conduit/wire way duct etc. as required of following sizes:

Quantity-

Rate-

Amount -

2 Pair (4 core)

Quantity180

Rate5034

Amount 27.97

Providing, laying, connecting and testing of multi-core telephone unarmoured cable of conductor size 0.5mm dia annealed copper conductor PVC insulated PVC sheathed jelly filled (as per DOT specification) cable along wall or ceiling or through existing pipe.

Quantity-

Rate-

Amount -

10 Pair telephone cable

Quantity100

Rate17290

Amount 172.9

Providing, fixing connecting and testing of under noted size of solderless telephone tag block Krone make in surface/recess in wall required size of M.S. box with hinged lockable cover duly stove enamel painted.

Quantity-

Rate-

Amount -

10 pair tag block

Quantity1

Rate3288

Amount 3288.9

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Quantity-

Rate-

Amount -

20mm dia PVC conduit

Quantity600

Rate56520

Amount 94.2

25mm dia PVC conduit

Quantity1000

Rate106710

Amount 106.71

32mm dia PVC conduit

Quantity500

Rate67705

Amount 135.41

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required

Quantity-

Rate-

Amount -

1 or 2 Module (75mmX75mm)

Quantity51

Rate11184

Amount 219.3

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

Quantity-

Rate-

Amount -

Telephone socket outlet

Quantity5

Rate544

Amount 108.92

TV antenna socket outlet

Quantity1

Rate108

Amount 108.92

RJ-45 Data Socket outlet

Quantity45

Rate26761

Amount 594.7

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

Quantity-

Rate-

Amount -

1 run of cable

Quantity1620

Rate67959

Amount 41.95

Providing, laying, connecting and testing of unarmoured TV cable RG-6 PVC insulated cable along wall or ceiling or through existing pipe.

Quantity30

Rate1037

Amount 34.59

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required

Quantity-

Rate-

Amount -

Upto 35 sq. mm (clamped with 1mm thick saddle

Quantity100

Rate4048

Amount 40.48

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp

Quantity20

Rate1913

Amount 95.67

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Quantity-

Rate-

Amount -

Upto 35 sq. mm (clamped with 1mm thick saddle)

Quantity700

Rate23184

Amount 33.12

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Quantity80

Rate5416

Amount 67.7

Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment

Quantity-

Rate-

Amount -

3.5 x 70 sq.mm

Quantity100

Rate90060

Amount 900.6

3.5 x 35 sq.mm

Quantity250

Rate124212

Amount 496.85

3.5 x 25 sq.mm.

Quantity400

Rate161120

Amount 402.8

4 x 16 sq.mm

Quantity50

Rate17432

Amount 348.65

Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.

Quantity-

Rate-

Amount -

3½ X 25 sq. mm (28mm)

Quantity30

Rate6910

Amount 230.34

3½ X 35 sq. mm (32mm)

Quantity14

Rate3801

Amount 271.56

3½ X 50 sq. mm (35mm)

Quantity6

Rate1823

Amount 303.94

4 X 16 sq. mm (28mm)

Quantity2

Rate454

Amount 227.4

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

Quantity-

Rate-

Amount -

100 mm dia

Quantity20

Rate26581

Amount 1329.07

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

Quantity-

Rate-

Amount -

90 mm dia (OD-90 mm & ID-76 mm nominal)

Quantity20

Rate4268

Amount 213.42

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

Quantity-

Rate-

Amount -

100 mm wide x 50 mm depth x 1.6 mm thickness.

Quantity150

Rate73849

Amount 492.33

150 mm wide x 50 mm depth x 1.6 mm thickness.

Quantity120

Rate63230

Amount 526.92

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

Quantity-

Rate-

Amount -

100 mm wide x 50 mm depth x 1.6 mm thickness.

Quantity10

Rate8529

Amount 852.93

150 mm wide x 50 mm depth x 1.6 mm thickness.

Quantity10

Rate9346

Amount 934.62

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

Quantity-

Rate-

Amount -

100 mm wide x 50 mm depth x 1.6 mm thickness.

Quantity5

Rate4882

Amount 976.57

150 mm wide x 50 mm depth x 1.6 mm thickness.

Quantity5

Rate5088

Amount 1017.78

Fire Fighting Work Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. (EXTERNAL WORKS)

Quantity-

Rate-

Amount -

100 mm dia.

Quantity121

Rate402325

Amount 3325

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

Quantity-

Rate-

Amount -

100 mm dia.

Quantity1

Rate4906

Amount 4906.39

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

Quantity-

Rate-

Amount -

100 mm dia.

Quantity1

Rate8131

Amount 8131.94

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

Quantity-

Rate-

Amount -

2 way - 100 mm dia M.S. Pipe (Siamese Connection)

Quantity1

Rate4961

Amount 4961.58

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.

Quantity-

Rate-

Amount -

450 lpm at 35 m Head

Quantity1

Rate63438

Amount 63438.67

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. (for terrace booster pump)

Quantity1

Rate1137

Amount 1137.74

Providing & fixing of start/stop push buttons including complete connection etc. as required. (for terrace booster pump)

Quantity1

Rate807

Amount 807.5

Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required (for terrace booster pump)

Quantity1

Rate880

Amount 880.16

Quantity-

Rate-

Amount -

100 mm dia.

Quantity2

Rate9812

Amount 4906.39

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

Quantity-

Rate-

Amount -

100 mm dia.

Quantity1

Rate8131

Amount 8131.94

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Quantity-

Rate-

Amount -

80 mm nominal bore

Quantity13.2

Rate18311

Amount 1387.21

100 mm nominal bore

Quantity132

Rate248196

Amount 1880.28

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

Quantity-

Rate-

Amount -

Single headed Gunmetal

Quantity6

Rate33761

Amount 5626.86

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Quantity-

Rate-

Amount -

40 m

Quantity6

Rate53308

Amount 8884.78

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

Quantity-

Rate-

Amount -

Gun metal

Quantity12

Rate45939

Amount 3828.27

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Quantity-

Rate-

Amount -

Gun metal

Quantity6

Rate10667

Amount 1777.99

Providing and fixing standard fire mans axe with heavy duty insulated rubber handle.

Quantity6

Rate9348

Amount 1558

Providing of FHC Door made of 16 gauge MS Sheet with frame of size 105x70mm complete door and frame assembly including all hardwares (Concealed Flush handle,Allen Key Lock, MS Hinges, 5mm Thick Float glass) & accesories . The door to be painted with fire resistance paint. The scope shall also include the painting of the frame with the same paint as the shutter or complete as per direction of Engineer-in-charge. (Approx. size of door: 900mm Wide & 1500mm Height)

Quantity6

Rate54150

Amount 9025

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Quantity6

Rate5832

Amount 972.15

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Quantity2

Rate26852

Amount 13426.16

Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Quantity6

Rate68286

Amount 11381

Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Quantity6

Rate51870

Amount 8645

Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.

Quantity18

Rate17100

Amount 950

Fabricating & Supply, installing, testing and commissioning of sheet steel clad floor mounting control panel having suitable size for control of 1 nos. booster pumps 5.5 KW/7.5HP each having suitable incoming MCCB, incoming voltmeter with selector switch and fuses. DOL Starter with hand reset overload cum single phase preventor type relay, Ammeters to read current in any one phase, alarm with reset push button which will automatically reset for the next cycle. (As per the Technical Specifications) (At Terrace floor)

Quantity1

Rate19000

Amount 19000

Supply, installation , testing & commissioning of XLPE insulated and PVC outer sheathed Aluminium conductor armoured cable of 1.1 KV grade confirming to IS : 7098:1988 (with upto date amendments) of following sizes.

Quantity-

Rate-

Amount -

3 Core, X 6 sqmm.

Quantity55

Rate14421

Amount 262.2

Supplying and making end termination with brass compression gland & Al.lugs for following sizes of PVC insulated, PVC sheathed/ XLPE Al.conductor cables of 1.1 KV grade as required.

Quantity-

Rate-

Amount -

3 Core, X 6 sqmm.

Quantity4

Rate288

Amount 72.2

Supplying and laying control wiring with multicore copper stranded conductor of following sizes PVC insulated, PVC sheathed armoured cable between various sensors and system controller/starter etc.in pump house & out side on surface/existing cable tray complete with connections at both end with glands etc.as required

Quantity-

Rate-

Amount -

2 x 2.5 sq.mm

Quantity55

Rate7576

Amount 137.75

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

Quantity-

Rate-

Amount -

150 mm width x 50mm depth x 1.6 mm thickness.

Quantity55

Rate31559

Amount 573.8

EXTERNAL RAIN WATER HARVESTING WORKS Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-incharge.

Quantity-

Rate-

Amount -

In all kind of soil upto 1.5m depth

Quantity45.18

Rate5652

Amount 125.1

In all kind of soil upto 1.5m to 3.0m. depth

Quantity45.18

Rate9689

Amount 214.46

In all kind of soil upto 3.0m to 4.5m. depth

Quantity45.18

Rate13727

Amount 303.83

In all kind of soil upto 4.5 m to 6.0m. depth

Quantity21.08

Rate8288

Amount 393.19

Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.

Quantity2.4

Rate13326

Amount 5552.58

Class M-150 brick work in 1:4 cement coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.

Quantity48.28

Rate250798

Amount 5194.66

Quantity3.22

Rate20528

Amount 6375.22

Suspended floors, roofs, landings, balconies and access platform.

Quantity21.49

Rate14043

Amount 653.5

Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

Quantity3.8

Rate28682

Amount 7548.15

12mm cement plaster on rough side of single or half brick wall mix

Quantity-

Rate-

Amount -

1:3 (1 cement : 3 Coarse sand)

Quantity92.32

Rate28579

Amount 309.57

Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:

Quantity-

Rate-

Amount -

With 20x20mm square bar

Quantity20

Rate7677

Amount 383.89

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.

Quantity-

Rate-

Amount -

M.D. -10- Circular shape 500mm internal diameter

Quantity2

Rate1652

Amount 826.42

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.

Quantity-

Rate-

Amount -

Drilling of 300mm dia bore hole manually.

Quantity30

Rate17457

Amount 581.93

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

Quantity-

Rate-

Amount -

150 mm nominal size dia

Quantity30

Rate17072

Amount 569.07

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Quantity24.26

Rate25814

Amount 1064.07

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Quantity26.22

Rate28425

Amount 1084.12

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.

Quantity26.22

Rate28425

Amount 1084.12

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.

Quantity2

Rate2853

Amount 1426.82

Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m.

Quantity-

Rate-

Amount -

In all kind of soil upto 1.5m depth

Quantity20.1

Rate2514

Amount 125.1

In all kind of soil upto 1.5m to 3.0m. depth

Quantity8.12

Rate1741

Amount 214.46

Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.

Quantity2.08

Rate11549

Amount 5552.58

Class M-150 brick work in 1:4 cement coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.

Quantity7.04

Rate36570

Amount 5194.66

Quantity2.76

Rate17595

Amount 6375.22

Suspended floors, roofs, landings, balconies and access platform.

Quantity14.54

Rate9501

Amount 653.5

Quantity3.26

Rate24606

Amount 7548.15

15mm cement plaster on rough side of single or half brick wall mix

Quantity-

Rate-

Amount -

1:3 (1 cement : 3 Coarse sand)

Quantity35.2

Rate10896

Amount 309.57

Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:

Quantity-

Rate-

Amount -

With 20x20mm square bar

Quantity24

Rate9213

Amount 383.89

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.

Quantity-

Rate-

Amount -

M.D. -10- Circular shape 500mm internal diameter

Quantity4

Rate3305

Amount 826.42

Quantity-

Rate-

Amount -

up to 1.50 m depth Pipes 80 mm to 300 mm diameter

Quantity363

Rate90092

Amount 248.19

Quantity-

Rate-

Amount -

150 mm. dia. RCC Pipes

Quantity363

Rate142357

Amount 392.17

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design

Quantity-

Rate-

Amount -

150 mm. dia.

Quantity363

Rate190110

Amount 523.72

Constructing brick masonry INSPECTION chamber 60x60x75 cm with bricks of class designation 50 in cement mortar 1:4 (1 cement : 4 coarse sand) including CI cover with frame LIGHT WEIGHT complete as per design. With FPS bricks

Quantity30

Rate201432

Amount 6714.42

Tube Well Transportation Charges of drilling equipment including assembly and other material as required.

Quantity1

Rate9500

Amount 9500

Drilling of 675 mm. dia by rotary machine

Quantity100

Rate123500

Amount 1235

Supply & laying of 350 mm. dia housing pipe (8 mm. thick)

Quantity40

Rate87400

Amount 2185

Supply & laying of 200 mm. dia blind pipe (8 mm. thick)

Quantity25

Rate42750

Amount 1710

Supply & laying of 200 mm. dia slotted pipe (8 mm. thick)

Quantity35

Rate59850

Amount 1710

Supply & fixing of 350 mm. dia Socket

Quantity8

Rate10640

Amount 1330

Supply & fixing of 200 mm. dia Socket

Quantity11

Rate8360

Amount 760

Supply & fixing of 200 mm. dia Bail plug

Quantity1

Rate1140

Amount 1140

Supply & fixing of 350 mm. dia well cap

Quantity1

Rate1710

Amount 1710

Supply & fixing of 350x200 mm. dia reducer.

Quantity1

Rate3610

Amount 3610

Supply & fixing of 350 mm. dia housing clamp

Quantity1

Rate1900

Amount 1900

Supply & Filling of pee gravel 2 mm. 4 mm. in side of bore after lower and development as required as per direction of E/I.

Quantity32

Rate69920

Amount 2185

Development by air compressor including Transportation.

Quantity25

Rate42750

Amount 1710

Development by O.P. Unit including Transportation.

Quantity35

Rate49875

Amount 1425

Supply of submersible pump suitable for tube well capable of pumping clear and cold water free from chemical and directly coupled with electric moter operating of 415 volt suitable for 3 phase 50 cycle A.C. Supply of following duty condition. A - Discharge of water in LPM 860 Approx size of discharge outlet in 80 mm.

Quantity-

Rate-

Amount -

B - Total Head of pump set 45 m.

Quantity1

Rate59850

Amount 59850

Supply and fixing of finolex or equivalent ISI marked submersible copper cable of size 2x3x2.5 sq. mm.

Quantity55

Rate9405

Amount 171

Supply of control panel cubical type wall mounted vermin proof with internal wiring duly enameled painted and mechanically finished having L&T of qul. Male switch fuse unit with HRC fuses, Ameter, Boltmeter, Selector switch, phase indicating lamp with bulbs, instrument fuses, power capcitor single phase preventor etc. complete set with supply of Jyoti or eq. Air break Star- Delta motro starter suitable for above submersible pump set.

Quantity1

Rate17100

Amount 17100

Supply of 80mm dia M.S. column pipe of class 'C' both and socketed with heavy sockets in 3/6 meter length and one end flanged complete with interlocking arrangements.

Quantity55

Rate94050

Amount 1710

Supply of 80mm dia M.S. column pipe clamps with nut, bolts, packing etc.

Quantity2

Rate2660

Amount 1330

Supply of 80mm dia C.I. double flanged ISI mark reflex valve of updadhya or equ. Make.

Quantity1

Rate6175

Amount 6175

Supply of 80mm dia C.I. double flanged ISI mark sluice valve with hand wheel of upadhya or equ. Make.

Quantity2

Rate15200

Amount 7600

Supply of C.I. double flanged bend of 80mm dia i/c cost of material and labour.

Quantity1

Rate1377

Amount 1377.5

Supply of 80mm dia C.I. tee heavy quality i/c cost of material.

Quantity1

Rate5700

Amount 5700

Supply of Guru/Fibing or equivalent make pressure gauge.

Quantity1

Rate4750

Amount 4750

Erection & commissioning of pumping plants complete along with electric wiring.

Quantity1

Rate14250

Amount 14250

Supply of steel wire rope of 1/2" size

Quantity55

Rate2612

Amount 47.5

S/B of 600mm x 600 mm x 6.0 mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead on one no. 8 to 10 SWG GI wite in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. , pipe and G.I. wire will be extra) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal. coke and salt at least 150mm thick alround etc. as per directions of E/I complete in all respects as per drawing.

Quantity1

Rate4085

Amount 4085

S/F of one number 8 to 6 SWG G.I. wire in 15mm dia G.I. Pipe for earthing, laid in ground or in wall duly concealed includingn the cost of cement, sand labour. T&P other material required for proper completion of the work as directed at site.

Quantity8

Rate1520

Amount 190

S/F of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by E/I complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc.

Quantity-

Rate-

Amount -

16 sqmm x 4 core

Quantity40

Rate8360

Amount 209

Interlocking Tiles Work Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Quantity559.2

Rate6934

Amount 12.4

Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m (5 fts.) and lead upto 30 mt. (100 fts.) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-Incharges upto a distance of 30mt. (100 fts) from the foundation trenches.

Quantity14.17

Rate2598

Amount 183.45

Prepration and consolidation of sub grade with power road roller of 8 to12 tonne capacity after excavating earth to an average of 22.5 cm depth , dressing to camber and consolidating with road roller including making good undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead up to 50 meters.

Quantity559.2

Rate86273

Amount 154.28

Class -150 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materails , labour tools and plants etc. required for proper completetion of the work.

Quantity17.15

Rate89083

Amount 5194.66

Providing and laying cement concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone ballast 40 mm. nominal size ) indcluding supply of all materials , labours and T & P etc. required for proper completion of the work and curing complete , Also including cost of form work in foundation.

Quantity12.68

Rate60851

Amount 4800.93

Construction of granular sub base by providing close graded material conforming to specifications , mixing in mechanical mix plant at OMC , carriage of mixed material by ippers to work site, For all leads & lifts , spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density , complete as per specification and directions of engineering - charge with material conforming to grade II (size range 53mm to 0.075 mm ) having CBR value 25.

Quantity76.8

Rate150683

Amount 1962.1

Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Quantity511.98

Rate350726

Amount 685.04

Cement plaster 1:3 (1 cement :3 coarse sand ) finished with a floating coat of neat cement 20 mm cement plaster.

Quantity57.16

Rate23656

Amount 413.84

Strom Water Drain 300X450 Earth work in excavation

Quantity186.4

Rate31432

Amount 168.63

P.C.C. 1:4:8

Quantity46.6

Rate301560

Amount 6471.4

B/W in 1:4 Cement Coarse Sand

Quantity16.96

Rate118741

Amount 7002.12

R.C.C. work

Quantity20.53

Rate176432

Amount 8593.46

Centering & shuttering

Quantity205.31

Rate180852

Amount 880.89

M.S. work in R.C.C.

Quantity12.89

Rate132098

Amount 10245.75

12 MM thick plaster (1:3) coarse sand

Quantity448.43

Rate187126

Amount 417.29

C.C. Road Work Prepration and consolidation of sub grade with power road roller of 8 to12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead up to 50 meters.

Quantity1094.07

Rate168793

Amount 154.28

Earth work in excavation.

Quantity68.08

Rate12488

Amount 183.45

Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form- work, in foundation and floors.

Quantity176.51

Rate847412

Amount 4800.93

Quantity98.22

Rate202472

Amount 2061.36

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Concrete of M30 grade with minimum cement content of 350 kg /cum

Quantity147.34

Rate1002629

Amount 6805.1

Cutting and Making expansion joint size of 8mm width and 18-20 mm deep in R.C.C. road through to heavy duty R.C.C. cutting machine and fitting polysulphide sealent in expansion joint size of 8 mm wide and 3 mm depth including sealent 8 mm x15 mm with debounding strips as per direction of Engineer in -charge

Quantity218.81

Rate45732

Amount 209

B/W in Toe wall (1 cement : 4 coarse sand )

Quantity50.57

Rate262693

Amount 5194.66

Cement plaster 1:3 (1 cement :3 coarse sand ) finished with a floating coat of neat cement 20 mm cement plaster.

Quantity111.84

Rate46283

Amount 413.84

Boundary Wall Earth work in excavation in trenches for foundation pipes, cable etc in ordinary sol (Loam clay or sand) inlcuding lift upto 1.5 Mt. lead upto 30mt. and dressing of sides and rammings of bottom and disposal of surplus excavated earth as directed by the engineer.

Quantity381.24

Rate69937

Amount 183.45

Coarse Sand (compacted) filling in sides of foundation & floor for saltpeter treatment

Quantity221.4

Rate635463

Amount 2870.23

Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.

Quantity21.36

Rate102538

Amount 4800.93

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in band excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20.

Quantity38.3

Rate244164

Amount 6375.22

As in item 3 above but in R.C.C. columns in1:1.5:3having strength not less than M-20.

Quantity14.55

Rate92753

Amount 6375.22

As in item 3 above but in R.C.C. columns in1:1.5:3having strength not less than M-20.

Quantity14.35

Rate109761

Amount 7648.9

As in item 3 above but in R.C.C. Raft foundation and footing with approved stone ballast. (Using 1:1.5:3 Mix concrete) M-20

Quantity36.24

Rate231025

Amount 6375.22

Quantity156.63

Rate1190569

Amount 7601.01

M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.

Quantity87.69

Rate440796

Amount 5026.64

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Quantity457.53

Rate362373

Amount 792.03

15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand.

Quantity1274.14

Rate355012

Amount 278.63

Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. (Two Coat)

Quantity1274.14

Rate104975

Amount 82.39

Quantity1441.9

Rate148515

Amount 103

Making grooves 12 mm wide x 12mm deep in plaster of the walls or in ceiling vertically or horizontally as required

Quantity5273.61

Rate373898

Amount 70.9

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns, etc. for mass concrete.

Quantity131.84

Rate36437

Amount 276.38

Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick

Quantity333.13

Rate197676

Amount 593.39

Columns,Pillars, Piers, Abutments, Posts and Struts.

Quantity220.42

Rate149333

Amount 677.5

M.S. Gate Earth work in excavation in trenches for foundation pipes, cable etc in ordinary sol (Loam clay or sand) inlcuding lift upto 1.5 Mt. lead upto 30mt. and dressing of sides and rammings of bottom and disposal of surplus excavated earth as directed by the engineer.

Quantity17.03

Rate3124

Amount 183.45

Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors.

Quantity0.79

Rate3811

Amount 4800.93

Coarse Sand (compacted) filling in sides of foundation & floor for saltpeter treatment.

Quantity13.11

Rate37640

Amount 2870.23

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Quantity34.73

Rate3576

Amount 103

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in raft foundation and footing excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.

Quantity1.8

Rate11475

Amount 6375.22

R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in columns excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.

Quantity2.65

Rate16868

Amount 6375.22

Quantity8.68

Rate65999

Amount 7601.01

Finishing walls with water-proofing on cement paint of approved make such as super snowcem, durrocem, robiacem, guttucem supercem quality and of required shade on undecorated wall surfaces (three coat) over one and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials.

Quantity10.92

Rate899

Amount 82.39

Mild steel or iron work in heavy sizes such as trusses built up gates, door frames, record racks, roof work gates etc. wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.

Quantity756

Rate91959

Amount 121.64

Painting or varnishing work in small areas or new wood work with one coat upto one square metre of ready mixed priming paint and one coat of approed superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should fonfirm the ISI no. 103-1950 (M.S. works)

Quantity30.24

Rate4822

Amount 159.46

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns, etc. for mass concrete.

Quantity7.2

Rate1989

Amount 276.38

Columns,Pillars, Piers, Abutments, Posts and Struts.

Quantity32.76

Rate22194

Amount 677.5

EXTERNAL ELECTRICAL WORKS Supply, Installation, testing and commissioning of 400 KVA. 11/0.433 KV, 3 Phase, 50Hz, Dyn 11, Oil type, copper wound transformer with ON load tap changing arrangement on HV side in steps of +/- 2.50%, +/- 5% , having cable end boxes on HV side and 500 Amp. bus trunking arrangement on LV side complete with all accessories i/c first filling of filtered dehydrated oil and confirming to IS 2026 (Part 1 to Part 5) & as per specification attached complete in all respects as required at site.

Quantity1

Rate1103425

Amount 1103425

H.T. VCB (11KV) ( LOCATED IN METER ROOM) Design, manufacturing, testing at works, supply of HT Panel as per specification and comprising of the following :- INCOMER/OUTGOING PANEL 630 A Vacuum circuit breaker of 18.3 KA ruputuring capacity at 11 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, vertical isolation,vermin proof,fully interlocked horizontal drawout type having double isolation. Manually and motor operated, spring charged( release closing mechanism) trip free type,triple pole truck mounted draw out, vacuum circuit breaker, incorporating mechanical as well as electrical ON/OFF indication. Spring charge/discharge mechanical indicator. 630 amp air insulated but encapsulated,PVC insulated Copper bus bars. C.T. chamber with C.T.'s 30/5. 15 VA burden for protection (class 5P 10). Following protection shall be provided: 1 Nos IDMT relay with instantaneous 2 nos. over currrent (50, 50 N) element and 1 no. instantaneous earth fault element(50-50N).(O/C setting 50%-200% and E/F setting 20%-80%) All wiring necessary for the above including inter-connections. The size of the conductor should not be less than 2.5 sq. mm. Copper wire where required. Test terminal block, fuses/2A SPMCB , circuit labels,set of phase, indication lamps etc. as per standard practise as under. Red - Breaker close (ON) Green - Breaker open (OFF) Amber - auto trip Clear - trip circuit healthy Blue spring charged Control :- T-N-C (Trip, Neutral. Close) breaker control switch with indication arrangement. Terminal boxes with single gland trifucating cable box suitable for 11 KV Aluminium XLPE (E) cable of size 3C x 120 Sq. mm. for incoming/outgoing breaker. HT Danger Plate.(as per IS specification) 2 Runs of 40 X 5 mm earth bus shall be provided for the full length of the panel. Power Pack, Battery power pack shall be rated for minimum five (5) trippings. For DC power one no. source selector switch to be incorporated i.e. one source from power pack and other from outside.

Quantity1

Rate473111

Amount 473111.4

Supply of 3 core stranded aluminium conductor 11KV grade XLPE (E) (Cross linked Polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cable confirming to IS : 7098 (part II with latest amendments).

Quantity-

Rate-

Amount -

120 sq. mm 3 core

Quantity50

Rate142120

Amount 2842.4

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Quantity-

Rate-

Amount -

Upto 120 sq. mm

Quantity30

Rate11590

Amount 386.36

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required

Quantity-

Rate-

Amount -

Upto 120 sq. mm

Quantity20

Rate1972

Amount 98.61

Supply and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 120Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.

Quantity2

Rate3904

Amount 1952.4

Supply and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 120 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.

Quantity2

Rate7945

Amount 3972.51

Supply & Erection of factory fabricated & wired metal clad dust and vermin proof mounting, M.S Channel Base with botom and top cable entreis Electrical control panel with TPN ACB (65KA, 4 Pole Elect draw out Micor Processer Release IPR2) and TPN MCCB's (four Pole 36 KA with thermal magnatic release) switches and instrument chamber etc. complete in all respect. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, instrument fuses current transformer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches enty boxes shall be complete with suitable cable end boxes reverse. The job includes the grounting of the board as per directions of Engineer-in-charge. All out goings of 100 Amp. and above will be provided with Amp. Metre, curent transformer and selector switches etc. and insurment fuse The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubical type switch board shall be of cat A & B only.

Quantity-

Rate-

Amount -

Main LT Panel Incoming : 1 No 800 Amp. 4P EDO ACB of 50KA (Ics=Icu) Breaking Capacity Metering : 1 Set of CT's one of 800/ 5Amp ratio for Multifunction Meter 1 Set of CT's one of 800/ 5Amp ratio 27,47,59,81. 1 Set of CT's one of 200/ 5Amp ratio for APFC relay. 1 Set of Phase Indication Lamp. Bus Bar : One (1) No. 1000 Amp. FP aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided. 400 Amps FP MCCB of 25KA -2 No 200 Amps FP MCCB of 25KA -3 No 2 No. SPACE & SPARE Panel described as above

Quantity1

Rate449254

Amount 449254.05

EM. PANEL INCOMING 1No. Of 400 Amps FP MCCB of 35KA breaking capacity 1No. Of 400 Amps FP ATS Metering : 1 Set of CT's one of 400/ 5Amp ratio for Multifunction Meter One (1) Set of Phase Indication Lamp. BUS BAR 1 Set of 500 Amps TPN Aluminium Bus Bars OUTCOMING 160 Amps FP MCCB of 25KA - 4 No 80 Amps FP MCCB of 25KA - 1 No 63 Amps FP MCCB of 25KA - 2 No 40 Amps FP MCCB of 25KA - 1 No 2 No. SPACE & SPARE Panel described as above

Quantity1

Rate325681

Amount 325681.85

EXTERNAL LIGHTING PANEL INCOMING 1No. Of 40 Amps FP MCCB of 25KA breaking capacity Metering : 1 Set of CT's one of 40/ 5Amp ratio for Multifunction Meter One (1) Set of Phase Indication Lamp. BUS BAR 1 Set of 60 Amps TPN Aluminium Bus Bars OUTCOMING 32 Amps 4P MCCB of 10KA - 2 No 16 Amps DP MCB of 10KA - 5 No 2 No. SPACE & SPARE Panel described as above

Quantity1

Rate75303

Amount 75303.65

CAPACITOR PANEL-100 KVAR SITC APFC Panel of 100 KVAR capacity suitable for operation on 415 + 5% Volt, 3 Phase, 50Hz, AC supply, having MPP type, resin bounded, static 5,10,15,25 KVAR capacitors (without oil) in tier formation complete with following TPN MCCB as incomer of the panel, 6 step microprocessor based power factor controller relay capable to select the rating from 1 KVAR to multiples thereon up to max rating of the panel, current limiting contactors for each capacitors protected with MCBs, Ammeter (Analogue type) with CTs, Voltmeter (Analogue type) selector switches indicating lights, cooling fans for panel, earthing the panel with 2 Nos. 25mm x 5mm thick GI steel flat from existing earth bar, connection of APFC panel with suitable size 3.5 core aluminium conductor armoured XLPE cable from main LT panel (maximum length of cable 10 mtrs.) and compression glands etc. as reqd. The panel should have provision of timer based circuit in APFC relay to switch ON and OFF the static part automatically as and when requried. Capacity of Static capacitors should be accommodated from the overall rating of the panel and should be designed to switch in independently. The panel should be manufactured with 1.6mm thick CRCA sheet duly powder coated. Incoming One (1) No 200 Amp. 4P MCCB of 25 KA Breaking capacity BUS BAR 1 Set of 250 Amps TPN Aluminium Bus Bars OUT GOING 02 No. 63 Amps. TP MCCB (25 KA)-25 KVAR 02 No. 40 Amps. TP MCCB (25 KA)- 15 KVAR 02 No. 32 Amps. TP MCCB (25 KA) - 10 KVAR Panel described as above

Quantity1

Rate208072

Amount 208072.8

Quantity1

Rate166

Amount 166.32

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Quantity3

Rate11718

Amount 3906.27

Quantity10

Rate45744

Amount 4574.49

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Quantity4

Rate34717

Amount 8679.46

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Quantity216

Rate135591

Amount 627.74

Quantity440

Rate42420

Amount 96.41

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Quantity150

Rate20752

Amount 138.35

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Quantity100

Rate74255

Amount 742.55

Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.

Quantity250

Rate37900

Amount 151.6

Laying of one number PVC insulated and PVC sheathed / XLPE power Cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Quantity-

Rate-

Amount -

Up to 35 sq.mm.

Quantity350

Rate83195

Amount 237.7

Above 95 sq.mm. and upto 185 sq.mm.

Quantity340

Rate88073

Amount 259.04

Above 185 sq.mm. and up to 400 sq.mm.

Quantity450

Rate131143

Amount 291.43

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required

Quantity-

Rate-

Amount -

Up to 35 sq.mm.

Quantity50

Rate1140

Amount 22.81

Above 95 sq.mm. and upto 185 sq.mm.

Quantity30

Rate1413

Amount 47.1

Above 185 sq.mm. and up to 400 sq.mm.

Quantity50

Rate4121

Amount 82.42

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required

Quantity-

Rate-

Amount -

Upto 35 sq. mm (clamped with 1mm thick saddle

Quantity50

Rate1435

Amount 28.7

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp

Quantity30

Rate2693

Amount 89.78

Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)

Quantity50

Rate6697

Amount 133.94

Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment

Quantity-

Rate-

Amount -

3.5 x 300 sq.mm.

Quantity150

Rate483075

Amount 3220.5

3.5 x 240 sq.mm.

Quantity246

Rate648283

Amount 2635.3

3.5 x 185 sq.mm

Quantity125

Rate256618

Amount 2052.95

3.5 x 35 sq.mm

Quantity101

Rate50181

Amount 496.85

3.5 x 25 sq.mm.

Quantity100

Rate40280

Amount 402.8

4 x 10 sq.mm

Quantity100

Rate29165

Amount 291.65

3 x 6 sq.mm,

Quantity250

Rate50350

Amount 201.4

Quantity-

Rate-

Amount -

2 X 6 sq. mm (19mm)

Quantity32

Rate4662

Amount 145.71

3½ X 25 sq. mm (28mm)

Quantity16

Rate2943

Amount 183.98

3½ X 50 sq. mm (35mm)

Quantity2

Rate484

Amount 242.12

3½ X 95 sq. mm (45mm)

Quantity2

Rate696

Amount 348.09

3½ X 185 sq. mm (57mm)

Quantity4

Rate2066

Amount 516.62

3½ X 300 sq. mm (70mm)

Quantity2

Rate1377

Amount 688.82

4 X 10 sq. mm (25mm)

Quantity2

Rate322

Amount 161.17

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

Quantity-

Rate-

Amount -

100 mm dia

Quantity30

Rate39872

Amount 1329.07

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.

Quantity-

Rate-

Amount -

100mm dia

Quantity20

Rate9743

Amount 487.18

150 mm dia

Quantity20

Rate10656

Amount 532.81

250 mm dia

Quantity20

Rate14350

Amount 717.52

Quantity-

Rate-

Amount -

90 mm dia (OD-90 mm & ID-76 mm nominal)

Quantity30

Rate6402

Amount 213.42

Providing and fixing HT danger notice plate 250 mm x 200 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.

Quantity1

Rate179

Amount 179.56

Supplying and Fixing of Fire buckets, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.

Quantity4

Rate5700

Amount 1425

Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as reqd.

Quantity2

Rate5700

Amount 2850

Supply and fixing of fire extinguishers, ABC Type 9.00 kg. capacity(ISI Marked IS : 15683 & TAC approved) complete with initial charges and wall bracket, along with supply of all materials and labour for proper completion of work.

Quantity2

Rate24700

Amount 12350

Supply and fixing of CO2 type fire extinguishers, 4.50 kg. capacity(ISI Marked IS : 2878 & TAC approved) complete with initial charges and wall bracket, along with supply of all materials and labour for proper completion of work.

Quantity2

Rate17100

Amount 8550

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

Quantity-

Rate-

Amount -

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Quantity6

Rate84511

Amount 14085.28

Supplying, installation & testing of 7.0 m high octagonal GI pole with single arm as per approved sample made from 3 mm sheet steel (Grade S 355 J0) with top diameter as 75mm and bottom dia as 150mm and base plate of 240x240x16 mm with suitable slot shaped holes for mounting the same on a shallow foundation, GI weather proof junction box with 16A SP MCB, loop-in-loop out terminals for 2nos. 2Cx6 sq.mm YWY cables and 2x2.5 sq.mm copper conductor from junction box to fitting and connected accessories as required etc.

Quantity14

Rate399000

Amount 28500

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 45Watt. to 50 Watt and Confirming to IP66 protection having Company LOGO Engraved complete in all respect with 4000-5000 system lumens High Power LED with lenses, 110lm/W, PF0.95, THD 10% at full load, CRI70, Avg Life Class 50000Hrs@L70,fitting itself suitable for 60-65mm OD pipe

Quantity14

Rate77193

Amount 5513.8

Quantity-

Rate-

Amount -

Double pole

Quantity14

Rate5728

Amount 409.17

Supply and fixing of LED Gate light fitting having die cast aluminium body and diffuser with driver set suitable for 6 watt to 10 watt. Confirming to IP 54 and above protection complete in all respect.

Quantity4

Rate4951

Amount 1237.85

Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.

Quantity-

Rate-

Amount -

1 output per phase and suitable for single phase supply

Quantity3

Rate8073

Amount 2691.27

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Quantity-

Rate-

Amount -

Above 6.5 metre and upto 8.0 metre

Quantity14

Rate55275

Amount 3948.22

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required

Quantity-

Rate-

Amount -

32 mm dia

Quantity30

Rate7153

Amount 238.44

Cost of Earth Filling

Quantity4769.48

Rate2354692

Amount 493.7

Cost of Lift 20 Passanger) capacity weight 1360-kg Speed in M/Sec.Travel G+1 Doors operated by power (CPWD PAR-3.2.1)

Quantity1

Rate1822000

Amount 1822000

COST OF SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM [UPPWD PAR E&M, Item 8] FOR MAIN BUILDING (CPWD PAR-6.8.1)

Quantity50.05

Rate2062824

Amount 41215.28

634 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Uttar Pradesh Projects Corporation Limited Tender

Uttar Pradesh Projects Corporation Limited - UPPCL Tender

Costs

EMD

Document Cost

Tender Fee

Description

Contact

Tender Id

Bid Award Id

Tender No

Tender Authority

Purchaser Address

Website

BOQ Items

Potential Partner

TENDER BY COUNTRIES

United States Tenders|

United Kingdom Tenders|

Spain Tenders|

France Tenders|

Qatar Tenders|

Australia Tenders|

Canada Tenders|

China Tenders|

Malaysia Tenders|

Maldives Tenders|

Singapore Tenders|

Bangladesh Tenders|

Ethiopia Tenders|

Bhutan Tenders|

Kuwait Tenders|

Oman Tenders|

Germany Tenders|

Egypt Tenders|

Ghana Tenders|

Saudi Arabia Tenders

TENDER BY AUTHORITIES

Federal Road Agency Tenders|

Bangladesh Railway Tenders|

Area Metropolitana De Barcelona Tenders|

Jsc Russian Railways Tenders|

Kuwait Oil Company Tenders|

Civil Aviation Authority Tenders|

Food And Agriculture Org. Tenders|

Eskom Tenders|

Energy Regulation Commision Tenders|

Dept Of Defence Tenders

TENDER BY CATEGORIES

Agriculture Or Forestry Works Tenders|

Automobiles And Auto Parts Tenders|

Civil And Construction Tenders|

Consultancy Services Tenders|

Education And Training Services Tenders|

Electrical And Electronics Tenders|

Finance And Insurance Sectors Tenders|

Food Products Tenders|

Furnitures And Fixtures Tenders|

Healthcare And Medicine Tenders

TENDER BY PROCUREMENT

Goods Tenders|

Works Tenders|

Services Tenders

OFG MANUFACTURING BUSINESSES PRIVATE LIMITED

Head Office

Sales Office

COMPANY

About Us

Contact Us

Download Media Kit

POLICIES

Terms of Use

Privacy Policy

SUPPORT

Request Demo

MOBILE APPS