Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Eprocure
Opening Date24 Dec 2021
Closing Date29 Dec 2021
Tender AmountRefer Documents
Costs
EMD
₹ 2,85,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Prw Labour, Other Civil, Electrification And Plumbing Works For Construction Of Chc Dhamuar Distt Deoria (balance Works)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_UPPRC_663548_1Bid Award Id
ViewTender No
42/PM/PCL/2021-22/GKP-29Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply and fixing flush doors commericial conforming to IS : 2202 (Part I) including fixing wooden cleats and stoppers and including fixing arid and adjustment of hings bolts locks handle springs fitting with necessary screws to be supplied departmentlly
-
-
-
... More
(a) 35 mm thick Single leaf
163.35
-
1349
... More
(b) 35 mm thick Double leaf
40.32
-
1453
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
144.3
-
771
... More
12 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
185.95
-
50
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 fine sand.
2650.73
-
61
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand.
2670.89
-
66
... More
Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in- Charge.
2572.59
-
24
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
786.98
-
979
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
57.54
-
979
... More
25mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement.
307.44
-
53
... More
4 cm(i thick 1:2:4 plain cement concrete floor with cementconcrete floor withcement approved corse sand and 2 cm graded approved stoneshingle laid in panel finish with 3 mm floting cost of neat cement and marble dust in 5.:1 speccified over & includig 8 cm
740.81
-
112
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete.
1952.43
-
902
... More
Painting or varnishing work in small areas or new wood work with one coat upto one square metre of ready mixed priming paint and one coat of approed superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should fonfirm the ISI no. 103-1950 (M.S. works)
571.66
-
63
... More
Same as above but wooden painting
407.34
-
65
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
2650.73
-
87
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Inner walls)
2670.89
-
66
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Ceiling)
1726.92
-
66
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
7048.55
-
107
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
144.54
-
703
... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
108
-
139
... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete
-
-
-
... More
(a) 250 mm x 10mm
124
-
57
... More
(a) 200 mm x 10mm
124
-
45
... More
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm
248
-
19
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
16.18
-
1460
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement.
-
-
-
... More
@ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
63.74
-
369
... More
Providing & laying "brick Coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of
-
-
-
... More
coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick
-
-
-
... More
ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete for proper completion of work.
1070.23
-
1045
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
32.44
-
3396
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,
-
-
-
... More
C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
18.12
-
4554
... More
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Light shade pigment using white cement
92.71
-
970
... More
12mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 1.25 F.M.
82.36
-
50
... More
Providing and fixing sheet covering over expansion joints with iron screws as per design to match the color / shade of wall treatment. (a) Aluminium fluted strips 3.15mm thick & 200 mm wide.
87.45
-
171
... More
Providing and fixing in position 40mm thick bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints.
87.45
-
461
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
430.47
-
449
... More
ELECTRICAL WORKS MAIN BUILDING
-
-
-
... More
Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as
-
-
-
... More
earth continuity wire and piano type switch etc. complete in all respects.
258
-
579.5
... More
Same as item No.(1) but for fan and light duty exhaust fan.
104
-
637.45
... More
Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc.
56
-
310.65
... More
Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor
-
-
-
... More
cable as earth contunity wire etc. complete in all respects.
1400
-
141.55
... More
Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4.0 sqmm FR PVC insulated multistranded copper conductor
-
-
-
... More
cable as earth contunity wire etc. complete in all respects.
850
-
193.8
... More
Supply and wiring of submain in PVC insulated 1100 V grade single core copper conductor cable in heavy duty PVC conduit partly laid in slab along with reinforcement before concreting with copper earth continuity wire etc. complete in all respects.
-
-
-
... More
a) 4x 10 sqmm.
360
-
479.75
... More
b) 4x16 sqmm
220
-
492.1
... More
Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work . ( for Telephone)
375
-
58.9
... More
Add for light / fan point with modular type switch in place of piano type switch
362
-
41.8
... More
Add for plug point with modular swith and socket in place piano type switch & socket
56
-
78.85
... More
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
87
-
133
... More
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
14
-
185.25
... More
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring
-
-
-
... More
conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.
87
-
142.5
... More
S/F of single light wall bracket on matching M.D.F.E.G. board base etc. complete in all respects.
78
-
1567.5
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA.
-
-
-
... More
a) 1x22 Watt.
174
-
1130.5
... More
b) 2x22 Watt.
6
-
1700.5
... More
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.
-
-
-
... More
a) 600x480x200 mm. size
12
-
617.5
... More
Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary
-
-
-
... More
conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work.
-
-
-
... More
a) 600x480x200 mm. size
12
-
1634
... More
Supply and fixing of flush/surface mounting distribution boards complete in all respects.
-
-
-
... More
a) 4 Way TPN CAT B
11
-
2926
... More
b) 6 Way TPN CAT B
1
-
3477
... More
Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required.
-
-
-
... More
a) 6 - 32 amps.CAT B
122
-
247
... More
Supply fixing and making connection of following M.C.B.s complete in all respects as per direction and satisfaction of engineer-in-charge.
-
-
-
... More
40 Amp. 4 Pole CAT B
8
-
2161.25
... More
63 Amp. 4 Pole CAT B
4
-
2175.5
... More
Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.
60
-
593.75
... More
Supply/ fixing sheet steel enclosure surface/ flush mounting fitted with 20/32 Amp. 2 pin and earth metal clad scraping earth plug and socket complete. CAT B
1
-
1539
... More
Supply/ fixing sheet steel enclosure surface/ flush mounting fitted with 20/32 Amp. 2 pin and earth metal clad scraping earth plug and socket complete. CAT B
1
-
807.5
... More
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the
-
-
-
... More
cable run shall be fixed on M.S. clamps etc. of suitable size. S.I.No.501(I)
-
-
-
... More
a) 3.5 core 120 sqmm
150
-
782.8
... More
b) 3.5 core 50 sqmm
40
-
467.4
... More
c) 16 sqmm 4 core
125
-
325.85
... More
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I.
-
-
-
... More
pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in
-
-
-
... More
all respects.
2
-
9661.5
... More
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.
50
-
85.5
... More
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.
100
-
199.5
... More
Supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.2mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and
-
-
-
... More
adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.
-
-
-
... More
All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.
-
-
-
... More
The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
-
-
-
... More
The minimum clearances between bus bars shall be as follows :
-
-
-
... More
Phase to phase - minimum 20mm
-
-
-
... More
Phase to neutral-minimum 15mm
-
-
-
... More
Normal Panel :
-
-
-
... More
Incoming :
-
-
-
... More
One (1) No 250 A 4 pole MCCB
-
-
-
... More
Metering :
-
-
-
... More
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
-
-
-
... More
One (1) No. (0-250A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
-
-
-
... More
One (1) Set of Phase Indication Lamp.
-
-
-
... More
Bus Bar :
-
-
-
... More
One (1) No. 250 A, TPN aluminimum bus bar of suitable length.
-
-
-
... More
Outgoing :
-
-
-
... More
Phase indication lamps on each outgoing to be provided.
-
-
-
... More
63 Amps TP MCB -4 No
-
-
-
... More
40 Amps TP MCB -8 No
1
-
237500
... More
SUB DISTRIBUTION BOARD
-
-
-
... More
6 Way VERTICAL TPN
-
-
-
... More
Incoming 100 amp TPN MCCB 1 No.
-
-
-
... More
Outgoing: 40 amp TP MCB 2 No.
-
-
-
... More
63 amp TP MCB 2 No.
1
-
61750
... More
Supply and erection of AC 1400mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required
87
-
2090
... More
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required
-
-
-
... More
a) 300mm sweep.
14
-
2375
... More
Providing and Laying unplastisized rigid PVC pipe conforming to IS:13592 type A including jointing , cutting and making good the walls & floors as per requirement.
-
-
-
... More
150mm
20
-
902.5
... More
SANITARY & PLUMBING WORKS MAIN BUILDING
-
-
-
... More
Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush
-
-
-
... More
pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.
-
-
-
... More
Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.
6
-
4298.03
... More
Same as above but for European type W.C. pan with black plastic seat and lid. Make- Cera,Hindustan.
16
-
4075.3
... More
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including
-
-
-
... More
cutting & making good the walls wherever required.
-
-
-
... More
a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.
28
-
1990.22
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
... More
a) 32mm dia
28
-
66.5
... More
b) 40mm dia
18
-
68.4
... More
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.
28
-
744.8
... More
Providing and fixing stainless steel A ISI 304(18/8)kitchen sink as per IS 13983 with C.I. brackets, stainles steel plug 40mm including painting the fitting and brackets, cutting and making good the walls wherever required:
-
-
-
... More
Kitchen sink with drain board of size 510x1040x200mm
1
-
4426.93
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P. brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fitting and brackets, cutting and making good the wall wherever required :
-
-
-
... More
Size 450x300x150mm
11
-
3268.25
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
-
-
-
... More
a) Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern Parryware/ Hindware Seabird/ Orient (Coral)
1
-
8407.62
... More
b) Range of two urinal basins with 5.0 litre white P.V.C. automatic flushing cistern Parryware/ Hindware Seabird/ Orient (Coral)
2
-
6086.73
... More
c) One urinal basin with 5.0 litre white P.V.C. automatic flushing cistern Parryware/ Hindware Seabird/ Orient (Coral)
1
-
3186.4
... More
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.
18
-
472.1
... More
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms
18
-
125.69
... More
Providing & fixing soil, waste and vent pipes.
-
-
-
... More
a) 100mm dia centrifugally cast iron S & S pipe.
150
-
865.87
... More
b) 75mm dia centrifugally cast iron S & S pipe.
175
-
786.47
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.
-
-
-
... More
a) 100mm
130
-
381.68
... More
b) 75mm
160
-
323.37
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal
-
-
-
... More
size). Including cost of cutting holes & making good the walls etc.
-
-
-
... More
a) for 100mm dia pipe.
48
-
227.88
... More
b) for 75mm dia pipe.
36
-
224.67
... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.
-
-
-
... More
a) 100mm inlet & 75mm outlet.
66
-
1252.15
... More
b) 100mm inlet & 100 mm outlet.
2
-
1199.11
... More
Providing & fixing cast iron coller.
-
-
-
... More
a) 100mm dia.
50
-
324.6
... More
b) 75mm dia.
130
-
203.19
... More
Providing and fixing plain cast iron S & S sanitary bend.
-
-
-
... More
a) 100mm
54
-
309.78
... More
b) 75mm
23
-
229.71
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
... More
a) 100mm
9
-
365.98
... More
b) 75mm
16
-
305.02
... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.
-
-
-
... More
a) 100x100x100mm
17
-
529.34
... More
b) 75x75x75mm
8
-
372.92
... More
Providing and fixing cast iron single unequal plain junction of required degree.
-
-
-
... More
a) 100x100x75mm
2
-
726.62
... More
Providing and fixing cast iron terminal guard.
-
-
-
... More
a) 100mm
8
-
308.71
... More
b) 75mm
6
-
245.64
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.
-
-
-
... More
a) 110mm diameter
120
-
241.84
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
a) 110mm
90
-
228.95
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
-
-
-
... More
a) 110mm
22
-
193.48
... More
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.
-
-
-
... More
(internal work)
-
-
-
... More
Exposed on wall
-
-
-
... More
a) 25mm dia nominal bore (medium duty)
125
-
225.15
... More
b) 32mm dia nominal bore (medium duty)
90
-
413.74
... More
Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.
-
-
-
... More
a) 15mm dia nominal bore
180
-
259.35
... More
b) 20mm dia nominal bore
145
-
287.85
... More
Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.
-
-
-
... More
a) 15mm dia nominal bore.
180
-
11.88
... More
b) 20mm dia nominal bore.
145
-
14.17
... More
c) 25mm dia nominal bore.
125
-
18.52
... More
d) 32mm dia nominal bore.
90
-
22.18
... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.
-
-
-
... More
a) 15mm nominal bore
54
-
64.83
... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
-
-
-
... More
a) 15mm nominal bore
22
-
338.2
... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
... More
a) 15mm nominal bore
22
-
448.4
... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
-
-
-
... More
a) 15mm nominal bore
54
-
433.2
... More
Providing & fixing C.P. brass tap with albow operation of approved quality conforming to IS standards.
-
-
-
... More
a) 15mm nominal bore
1
-
449.35
... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).
-
-
-
... More
a) 25mm. Nominal bore
4
-
307.75
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
... More
a) 25mm dia nominal bore
6
-
388.32
... More
b) 32mm dia nominal bore
7
-
454.01
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
-
-
-
... More
Capacity 8000 litre
8000
-
5.7
... More
Providing and fixing brass stop cock of approved quality.
-
-
-
... More
a) 20 mm nominal bore
6
-
236.55
... More
b)15 mm nominal bore
4
-
313.5
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
... More
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
... More
a) Pipes 80mm to 300mm diameter.
190
-
284.48
... More
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
... More
a) 100mm diameter
50
-
196.65
... More
b) 150mm diameter
140
-
297.35
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
... More
a) 100mm diameter S.W. Pipe
50
-
647.7
... More
b) 150mm diameter S.W. Pipe
140
-
792.1
... More
Providing and fixing square mouth S.W. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not
-
-
-
... More
less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design.
-
-
-
... More
a) 150 x 100 mm. size P type
12
-
1837.18
... More
Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix
-
-
-
... More
(1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4
-
-
-
... More
(1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
-
-
-
... More
a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
6
-
8645.25
... More
b) Extra for depth of man hole size 90x80 cm
0.75
-
5948.19
... More
c) Inside size 90x120 cm & 90 cm deep including C.I. cover with frame (medium duty) total wt. of cover & frame to be not less than 116 Kg (wt. of cover 58 Kg & wt. of frame 58 Kg.
1
-
18185.98
... More
d) Extra for depth of man hole size 90x120 cm
-
-
-
... More
Providing and Fixing C.P. brass Ablution health faucet assembly with 1.2 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC]
16
-
475
... More
Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15 mm nominal bore
16
-
1330
... More
Providing & fixing 60x2cm. C.P. brass towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw.
32
-
475
... More
Providing & fixing white vitreous china urinal division plate as required.
5
-
902.5
... More
Extra for providing & fixing 125mm dia C.P. grating in place of C.I. grating over floor traps.
66
-
47.5
... More
SEPTIC TANK 02 NO
-
-
-
... More
Excavation in foundation in ordinary soil (loom, caly or sand) including lift upto 1.50m and lead upto 30m. And including filling, watering and ramming of excavated earth in to the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer in charge.S.I. No. 251
59.74
-
109.25
... More
Concrete with 40mm gauge approved brick ballast, fine sand and cement in proportion of 8:4:1 in foundation and floor including supply of all materials labour and tools and plants etc. required for proper completion of work. S.I. No. 275
5.6
-
595.84
... More
M-150 class brick work in 1:4 cement and Fine sand of 1.25 F.M, mortar for walls of super structure including necessary cutting and moulding of bricks rquired and also including supply of all material labour and tools and plants etc. required for proper completion of work. DSR 6.4.1
21.72
-
322.78
... More
15 mm thick plaster with cement mortar consisting of 1 Part cement and 3 Part of approved coarse sand. Minimum thickness not to be less than 10mm. Including supply of all materials, labours and T&P etc. required for proper completion of work. But finishing the surface with neat cement. As per DSR 13.8.1
88.66
-
81.45
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate. D.S.R.11.3.1
17.62
-
112.5
... More
R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. T-beam Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work.. DSR 5.3
3.24
-
1634.62
... More
Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including westage bend, hook and authorised over lapping shall be measured. DSR 5.22.6
2.64
-
726.75
... More
Providing M.S. foot rests (Step) including fixing in manholes with 345x345x150 cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar. D.S.R. 19.15.1
20
-
334.71
... More
Providing and fixing 100 x 100 x100 mm single equal plain junction of required degree :Sand cost iron of 100 mm diameter. As per IS: 3989. D.S.R 17.44.1
2
-
410.53
... More
Providing and fixing 100 mm dia Sand cast iron Pipe for in let and out let trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : As per IS: 3989. D.S.R 17.60.1.1
4
-
1199.11
... More
Providing and fixing plain Sand cast iron 100 mm diameter bend of required degree. as per IS : 3989.100 mm diameter sand cost iron S&S
2
-
309.78
... More
Providing and fixing waste and vent pipe 50mm diameter of 1.80m. Lenth sand cost iron S&S pipe .S.I.No. 24 (Sanatry materials)
4
-
902.5
... More
Providing and fixing sand cast iron terminal guard (Cowl) 75mm diameter As per IS.No. 3989 75 mm diameter guard (Cowl)
2
-
161.5
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : D.S.R. 17.58.1 & D.S.R. 17.58.3
-
-
-
... More
100 mm
11
-
381.68
... More
50mm
11
-
261.22
... More
Providing and fixing cast iron Manhole cover of 600x600mm with frame weighting not lessthan 32 kg. S.I.No. 53 (Sanatry materials)
-
-
-
... More
Cast iron Manhole cover
168
-
76
... More
Fixing sand cast spigot and socket, soil waste and ventilating pipes of nominal size 50mm diameter (leasd) caulked joint to be measured and paid separatly N.B.O. No.23.79 (a)
-
-
-
... More
50mm dia pipe
16
-
15.2
... More
Providing and fixing M.S. Stays and clamps for S.C.I. ventilating pipe as per stardand design clams made of 30x3mm flat iron with two bolts and nuts 12mm dia M.S. Slaty 900mm long in beded in cement Concrete block 230x230x150mm in 1:2:4 Cement approved coarse sand and cement (M.R.)
-
-
-
... More
M.S. Stays and Clamps
14
-
237.5
... More
Cast cement concrete as in baffle wall slab precast with cement approved coarse sand and 20mm gauge approved coarse sand and in proportion of 1:1.5:3 Baffle wall
0.18
-
409.12
... More
SOAK PIT 02 NO
-
-
-
... More
Excavation in foundation in ordinary soil (loom, caly or sand) including lift upto 1.50m and lead upto 30m. And including filling, watering and ramming of excavated earth in to the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer in charge.S.I. No. 251
29.42
-
109.25
... More
M-150 class brick work in 1:4 cement and Fine sand of 1.25 F.M, mortar for walls of super structure including necessary cutting and moulding of bricks rquired and also including supply of all material labour and tools and plants etc. required for proper completion of work.DSR 6.4.1
5.22
-
322.78
... More
Providing filling 40 mm brick ballast S.I.No.2 (a)
8.38
-
1482
... More
Providing filling 40 mm brick ballast S.I.No.2 (b)
6.28
-
1429.75
... More
Providing filling 40 mm brick bats S.I.No.1 (c)
9.96
-
1325.25
... More
R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. T-beam Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work. DSR 5.3
1.66
-
1634.62
... More
Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including westage bend, hook and authorised over lapping shall be measured. S.I.No. 504
1.3
-
726.75
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter. D.S.R. 19.1.1
6
-
307.8
... More
OHT 25 Kl
-
-
-
... More
Construction of 25 KL capicity on 19 mtr Staging RCC Over head Tank with 900 mm wide RCC stair case upto Staging with two tier railing 15 mm dia GI Pipe with 40*40*5mm MS angle Fixing of man hole ventilator Water Lable indicator and Lightning conductor as per electricity rules. 900 mm wide balcony MS Ladder 500 mm Wide 50*50*5 mm MS angle with Railing Staging to top dome, top dome to bottom dome inside the tank. fixing of GI pipe 65 mm dia inlet ,outlet ,wash out and over flow pipe will be fixed upto GL with required sluice valve fitting etc. cc floor. apron under the tank . painting on tank body vertical pites, ladder MS cover etc complete with approved water proofing (snocem)/enamal paint testing for water tightness including all arregments for filling water for testing pupose etc . The including all materials T&P, laboure charges complete as per drawing design and the Bearing Capicity 4.24 MT per SQm. MODE OF PAYMENT AS UNDER
-
-
-
... More
(i) Casting of foundation 30%
-
-
-
... More
(ii) Completion of half staging 15%
-
-
-
... More
(iii) Completion of rest staging upto the bottom of ring beam 20%
-
-
-
... More
(iv) Casting of bottom slab 20%
-
-
-
... More
(v) Casting up to top dome 10%
-
-
-
... More
(vi) Completion of all misc items and testing 5% (complete in all respects)
1
-
718130.65
... More
TUBE WELL
-
-
-
... More
Details cost of Tubewell Size 8"X6" and 80mm deep including cost of casting pipe column pipe cost of 5 HP submersible pump, pannel, cable
-
-
-
... More
Trasportation of rig machine and all accessories etc and back after completion of work
1
-
29689.4
... More
Water arrangement for drilling work
1
-
11875
... More
Drilling work by rig machine upto required
125
-
1472.5
... More
Providing and lowering of 200mm dia MS ISI mark pipe including sockets.
40
-
2066.25
... More
Providing & lowering of ISI mark 160mm dia M.S. blind pipe with sockets.
60
-
1757.5
... More
Providing & lowering of ISI mark 160 mm dia M.S. ribbed/strainer pipe with two layer of cloth mesh and tighted with plastic rope.
25
-
2327.5
... More
Supply & filling of Pea Gravel 1.6 to 4.8mm including all cost upto site.
20
-
3562.5
... More
Development of bore by compressor for suitable capacity.
-
-
-
... More
Transportation of air compressor
1
-
4750
... More
Lowering of tubewell assembly and shrouding of pea gravel
1
-
14250
... More
Running of air compressor
25
-
2522.25
... More
Providing & fixing of accessories i.e. well cap well pulg centre gide, reduce, socket, clamp etc.
1
-
14250
... More
Cost of submersible pump set & accessories
-
-
-
... More
Cost of 5 HP submersible cable.
1
-
42750
... More
Cost of 5.00 sqmm submersible cable.
60
-
190
... More
Lowering of column pipe with 5 H.P. submersible pump.
-
-
-
... More
Lowering of column pipe of 75mmm dia G.I. pipe including labour, materials, required for proper completion of work.
30
-
617.5
... More
Commissing & Installation of pump set & rail testing etc.
1
-
9500
... More
PUMP ROOM
-
-
-
... More
Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.
3.43
-
109.25
... More
Filling of carted earth.
-
-
-
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.
1.51
-
595.84
... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.
1.35
-
817
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows
-
-
-
... More
: (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 5 liters/sqm
6.92
-
180.5
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
0.45
-
789.12
... More
As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete)
1.64
-
1634.62
... More
As in item 7 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)
1.16
-
1691.62
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in raft foundation and footing excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
0.73
-
789.12
... More
Boring, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) 300 mm dia piles
36
-
1892.68
... More
Class 150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
3.43
-
350.33
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
2.97
-
403.75
... More
Painting on D.P.C. with two coats of airblown bitumen 85/50 or 85/25 @ 1.7 kg/sqm approx. including cost of fuel if any.
2.97
-
90.25
... More
Class 150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms.
6.95
-
806.33
... More
Same as in item no. 13 but in 1:3 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.
0.92
-
745.53
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
6.03
-
726.75
... More
12mm thick plaster with cement sand consisting of 1 part cement and 6 part of sand , minimum thickness not to be less than 10mm, including supply of all materials, labour and Tools and Plants etc required for completion of the work.
29.61
-
61.76
... More
15mm thick plaster with cement sand consisting of 1 part cement and 6 part of sand , minimum thickness not to be less than 10mm, including supply of all materials, labour and Tools and Plants etc required for completion of the work.
61.36
-
66.58
... More
Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in- Charge.
12
-
24.7
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
27.68
-
55.96
... More
40mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement.
9
-
112.5
... More
Providing and fixing glass strips of 3 mm thickness in joints of floors and skirting at the time of laying floors flush with floor level including supply of all materials, labour tools and plants etc. required for proper completion of the work. of 35 mm depth
54
-
16.15
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick
3.5
-
303.09
... More
Supply and fixing of flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts,locks, handle, springs and other Fitting with necessary screws to be supplied departmentally.35 mm thick
1.89
-
1349
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.
-
-
-
... More
Providing & fixing of hold fast for chaukhats of doors and windows.
6
-
13.11
... More
Providing & fixing of door / windows grill.
39.6
-
13.3
... More
Z-Section steel windows (openable)
30.6
-
13.3
... More
Angle iron door chaukhats .40*40*5
15.3
-
13.3
... More
Fixing of Door, windows/ventilators chaukhats in position.
-
-
-
... More
(a) Door chaukhats above 1.5 sqm to 5.0sqm
1
-
66.5
... More
(b) Window chaukhats above 1.5 sqm
1
-
45.6
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface)
29.61
-
66.5
... More
Finishing walls with water-proof cement paint of approved make such as super snowcem, durrocem, robiacem, guttucem, supercem quality and of required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. (For External wall surface)
61.36
-
58.9
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Ceiling)
10.44
-
66.5
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 250x16 mm
1
-
139.65
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
-
-
-
... More
(a) 250 mm x 10mm
2
-
57.95
... More
(a) 200 mm x 10mm
4
-
45.6
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm
4
-
19.95
... More
Providing & laying "brick Coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of
-
-
-
... More
coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick
-
-
-
... More
ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete for proper completion of work.
11.97
-
1045
... More
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
6.53
-
63.65
... More
Same as item 45above but on new wood surface.
3.78
-
65.55
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes
1.8
-
703.41
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
46.51
-
61.91
... More
PUMP ROOM ELECTRICAL
-
-
-
... More
Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
2
-
579.5
... More
Same as item No.(1) but for fan and light duty exhaust fan.
1
-
637.45
... More
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
1
-
185.25
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA.
2
-
1130.5
... More
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required
-
-
-
... More
a) 300mm sweep.
1
-
1757.5
... More
Supply fixing of Sheet Steel Enclosure For DP/TP?Fore pole MCB With Neutra link and earth terminall complete in all respects as per direction and satisfaction of engineer-in-charge.
1
-
522.5
... More
Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge.
-
-
-
... More
6 Amp To 32 Amp. 4 Pole
1
-
1197
... More
Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required.
-
-
-
... More
a) 6 - 32 amps.SPMCB (10KA)
1
-
195.7
... More
TYPE-1 FF & SF CIVIL WORKS
-
-
-
... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. (5 miles) from the site of work and including watering, ramming, dressing etc rate to include cost of all materials, labour and T & P etc required for proper completion of the work.
7.78
-
826.5
... More
Making drain along with the apron.
41.4
-
569.05
... More
Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors.
5.73
-
605.34
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
-
-
-
... More
Same as above for First floor
1.88
-
798.62
... More
Same as above for Second floor
1.88
-
939.22
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in slab excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
-
-
-
... More
Same as above for First floor
11.83
-
1727.72
... More
Same as above for Second floor
15.42
-
1812.15
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in beams excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
-
-
-
... More
Same as above for First floor
2.43
-
1785.29
... More
Same as above for Second floor
0.82
-
1870.3
... More
Cost cement concrete door sills, chaukhats boundary posts, shelves and similar work with cement approved coarse sand and 2cm gauge approved stone ballast in the proportion of 1:2:4, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire, and including the cost of binding wire, moulds and all other materials, labour and T & P etc required for proper completion of the work.
0.75
-
429.83
... More
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 40 mm thick
3.2
-
1054.2
... More
Brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.5 brick thick. (1:6 cement & coarse sand)
-
-
-
... More
Same as above for Ground & First floor
27.35
-
754.08
... More
Same as above for Second floor
28.92
-
800.11
... More
Same as in item no. 12 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.
-
-
-
... More
Same as above for Ground & First floor
4.41
-
978.28
... More
Same as above for Second floor
10.23
-
1028.06
... More
Providing & laying "brick Coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of
-
-
-
... More
coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick
-
-
-
... More
ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete for proper completion of work.
86.04
-
1045
... More
Supply and fixing flush doors commericial conforming to IS : 2202 (Part I) including fixing wooden cleats and stoppers and including fixing arid and adjustment of hings bolts locks handle springs fitting with necessary screws to be supplied departmentlly 35 mm thick Single leaf
91.14
-
1349
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.
-
-
-
... More
Hold fast for chaukhats of doors/windows.
162
-
13.11
... More
Door / windows & Staircase grill.
895.5
-
13.3
... More
Z-Section windows
562.5
-
13.3
... More
Angle iron door chaukhat 35*35*5
647.92
-
13.3
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
33.75
-
771.4
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks.
-
-
-
... More
Same as above for Ground & First floor
18.72
-
726.75
... More
Same as above for Second floor
18.34
-
726.75
... More
Fixing of Door, windows/ventilators chaukhats in position.
-
-
-
... More
(a) Door chaukhats
25
-
68.4
... More
(b) Window chaukhats
18
-
45.6
... More
(c) Ventilator chaukhats
12
-
34.2
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
35.62
-
50.11
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 fine sand.
517.85
-
61.76
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand
538.1
-
66.58
... More
Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in- Charge.
310.52
-
25.65
... More
40mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement.
157.87
-
112.5
... More
25mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement.
41.4
-
55.28
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick
55.59
-
303.09
... More
Supply & fixing of glass strips for flooring 35mm wide - 3.8 to 4.7mm thick.
947.21
-
16.15
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete.
88.92
-
902.5
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
12.24
-
950
... More
Painting or varnishing work in small areas or new wood work with one coat upto one square metre of ready mixed priming paint and one coat of approed superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should fonfirm the ISI no. 103-1950 (M.S. works)
191.05
-
63.65
... More
Same as above but wooden painting
182.28
-
65.55
... More
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work. (Three Coat)
517.85
-
61.75
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Inner walls)
538.1
-
69.35
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Ceiling)
205.52
-
69.35
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
33.75
-
703.41
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
49
-
139.65
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
-
-
-
... More
(a) 250 mm x 10mm
49
-
57.95
... More
(a) 200 mm x 10mm
49
-
45.6
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
98
-
19.95
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
5.51
-
1460.15
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement
-
-
-
... More
@ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
23.22
-
369.11
... More
12mm thick plaster with cement mortar in proportion of 1:4 cement & fine sand of 1.25 F.M.
22.77
-
50.11
... More
P/F curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete (a) 25 mm dia.
74.4
-
375.04
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a)25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws & One side laminated.
29.91
-
2270.01
... More
TYPE-1 ELECTRICAL WORKS
-
-
-
... More
Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as
-
-
-
... More
earth continuity wire and piano type switch etc. complete in all respects.
43
-
579.5
... More
Same as item No.(1) but for fan and light duty exhaust fan.
12
-
637.45
... More
Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc.
6
-
310.65
... More
Supply and wiring of submain with two Nos. 2x2.5 sqmm. PVC insulated 1100 V grade single core aluminium conductor cable in 19mm dia heavy gauge rigid steel conduit partly concealed in wall and partly laid in slab along with one number 8 SWG GI earth
-
-
-
... More
continuity wire etc. complete in all respects.
325
-
190
... More
Supply and wiring of submain 2 number 4sqmm FR PVC insulated 1100 V grade multistranded single core coppre conductor cable in heavy duty 20mm dia PVC conduit partly cncealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulted cable as earth contunity wire etc. complete in all respects.
325
-
141.55
... More
Erection and testing of ceiling fan and regulator for room height upto 35mts. including supply of 3mm thick G.I. down rod 19mm dia dully painted, complete in all respects.
12
-
133
... More
Supply and fixing of 16 Amp. 240V SPN metal clad rewireable type switch fuse unit on M.D.F.E.G. Board complete in all respects
6
-
642.2
... More
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWG M.S. sheet incorporating 10mm dia M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring
-
-
-
... More
conduit laid in the RCC roof before concreting along with supply of all materials, labour T & P etc. for proper completion of work.
12
-
142.5
... More
Add for light / fan point with modular type switch in place of piano type switch
55
-
41.8
... More
Add for light / fan point with modular type switch & socket in place of piano type switch& socket
6
-
78.85
... More
Supply and fixing of flush/surface mounting distribution boards complete in all respects.
-
-
-
... More
a) 4 Way TPN
1
-
2926
... More
Supply and fixing of 240 volts 'L' series miniature circuit breaker in existing MCB, DB complete with connections as required.
-
-
-
... More
a) 6 - 32 amps.
21
-
247
... More
Supply and fixing following rating isolator in the existing MCB DB complete with connections, as required.
-
-
-
... More
a) 32 Amps. 4P MCB
3
-
1520
... More
EARTHING AND LIGHTING CONDUCTOR :
-
-
-
... More
Supplying and burying of 600mmx600mm x6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I. pipe and funnel for watering and two earthing leads of No.8 to 10 SWG GI wire in 15mm dia G.I.pipe upto
-
-
-
... More
(switch board from apron to switch board the cost of G.I. pipe and G.I. wire will be exteral) 30cm. square C.I. frame with hinged, cover, masonary housing, alternate layers/of charcoal/coke and salt at least 150mm thick
-
-
-
... More
alround etc. complete in all respects.
1
-
9661.5
... More
S/F of single light wall bracket on matching M.D.F.E.G..board base etc. complete in all respects.
37
-
1567.5
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA.
6
-
1130.5
... More
Supply & Laying of Alumunium Conductor PVC Insulated armoured Served sheated table 1100V Grade A at a depth of 750mm Below ground level 3.5 core 50sqm
120
-
467.4
... More
Supply of AC 230/250 volts, 50 Hz ceiling fan with standard down rod, blades etc. complete
-
-
-
... More
(Crompton Greaves/GEC/ORIENT/BAJAJ)
-
-
-
... More
a) 1400 mm sweep
12
-
1852.5
... More
TYPE-1 PLUMBING & SANATIRAY WORKS
-
-
-
... More
Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush
-
-
-
... More
pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.
-
-
-
... More
Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.
6
-
4298.03
... More
Providing & Fixing white vitreous china wash basin with CI brackets painted white , 15 mm cp brass pillar taps cp brass chain with rubber plug 32mm cp brass waste of standerd pattern including cutting & making good the walls wherever required
-
-
-
... More
a) flat back wash basin size 550x400 mm with single 15mm cp brass pillar tap
6
-
1993.07
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
... More
a) 40mm dia
6
-
66.5
... More
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug , 40mm C.P. brass waste complete , including painting the fitting and brackets, cutting and making good the walls wherever required:
-
-
-
... More
White glazed fire clay kitchen sink of size 600x450x250mm
6
-
4426.93
... More
Providing & fixing soil, waste and vent pipes.
-
-
-
... More
a) 100mm dia centrifugally cast iron S & S pipe.
65
-
865.87
... More
b) 75mm dia centrifugally cast iron S & S pipe.
65
-
786.47
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.
-
-
-
... More
a) 100mm
60
-
381.68
... More
b) 75mm
60
-
323.37
... More
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal
-
-
-
... More
size). Including cost of cutting holes & making good the walls etc.
-
-
-
... More
a) for 100mm dia pipe.
36
-
227.88
... More
b) for 75mm dia pipe.
36
-
224.67
... More
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.
-
-
-
... More
a) 100mm inlet & 75mm outlet.
12
-
1252.15
... More
Providing & fixing cast iron coller.
-
-
-
... More
a) 100mm dia.
10
-
324.6
... More
b) 75mm dia.
24
-
203.19
... More
Providing and fixing plain cast iron S & S sanitary bend.
-
-
-
... More
a) 100mm
10
-
309.78
... More
b) 75mm
4
-
229.71
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
... More
a) 100mm
2
-
365.98
... More
b) 75mm
1
-
305.02
... More
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.
-
-
-
... More
a) 100x100x100mm
6
-
529.34
... More
b) 75x75x75mm
12
-
372.92
... More
Providing and fixing cast iron terminal guard.
-
-
-
... More
a) 100mm
2
-
308.71
... More
b) 75mm
4
-
245.64
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.
-
-
-
... More
a) 110mm diameter
45
-
241.84
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
-
-
-
... More
a) 110mm
6
-
193.48
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
a) 110mm
40
-
228.95
... More
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.
-
-
-
... More
(internal work)
-
-
-
... More
Exposed on wall
-
-
-
... More
a) 25mm dia nominal bore (medium duty)
55
-
347.24
... More
b) 32mm dia nominal bore (medium duty)
140
-
419.93
... More
Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.
-
-
-
... More
a) 15mm dia nominal bore
60
-
354.85
... More
b) 20mm dia nominal bore
80
-
391.71
... More
Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.
-
-
-
... More
a) 15mm dia nominal bore.
60
-
12.05
... More
b) 20mm dia nominal bore.
80
-
14.39
... More
c) 25mm dia nominal bore.
55
-
18.79
... More
d) 32mm dia nominal bore.
140
-
22.51
... More
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.
-
-
-
... More
a) 15mm nominal bore
18
-
65.8
... More
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
-
-
-
... More
a) 15mm nominal bore
6
-
332.13
... More
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
... More
a) 15mm nominal bore
12
-
437.89
... More
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
-
-
-
... More
a) 15mm nominal bore
18
-
421.76
... More
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).
-
-
-
... More
a) 25mm. Nominal bore
6
-
312.35
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
... More
a) 25mm dia nominal bore
6
-
394.13
... More
b) 32mm dia nominal bore
1
-
460.8
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
-
-
-
... More
Capacity 3000 litre
3000
-
6.98
... More
Providing and fixing brass stop cock of approved quality.
-
-
-
... More
a) 20 mm nominal bore
6
-
239.85
... More
b)15 mm nominal bore
6
-
258.8
... More
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
... More
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
... More
a) Pipes 80mm to 300mm diameter.
35
-
288.73
... More
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
... More
a) 100mm diameter
-
-
-
... More
b) 150mm diameter
35
-
396.55
... More
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
... More
a) 100mm diameter S.W. Pipe
-
-
-
... More
b) 150mm diameter S.W. Pipe
35
-
792.1
... More
Providing and fixing square mouth S.W. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not
-
-
-
... More
less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design.
-
-
-
... More
a) 150 x 100 mm. size P type
4
-
1837.18
... More
Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix
-
-
-
... More
(1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4
-
-
-
... More
(1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
-
-
-
... More
a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
1
-
8645.25
... More
b) Extra for depth of man hole size 90x80 cm
-
-
-
... More
SEPTIC TANK 02 NO
-
-
-
... More
Excavation in foundation in ordinary soil (loom, caly or sand) including lift upto 1.50m and lead upto 30m. And including filling, watering and ramming of excavated earth in to the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer in charge.S.I. No. 251
29.87
-
109.25
... More
Concrete with 40mm gauge approved brick ballast, fine sand and cement in proportion of 8:4:1 in foundation and floor including supply of all materials labour and tools and plants etc. required for proper completion of work. S.I. No. 275
2.8
-
595.84
... More
M-150 class brick work in 1:4 cement and Fine sand of 1.25 F.M, mortar for walls of super structure including necessary cutting and moulding of bricks rquired and also including supply of all material labour and tools and plants etc. required for proper completion of work. DSR 6.4.1
10.86
-
322.78
... More
15 mm thick plaster with cement mortar consisting of 1 Part cement and 3 Part of approved coarse sand. Minimum thickness not to be less than 10mm. Including supply of all materials, labours and T&P etc. required for proper completion of work. But finishing the surface with neat cement. As per DSR 13.8.1
44.33
-
81.45
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate. D.S.R.11.3.1
8.81
-
112.5
... More
R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. T-beam Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work.. DSR 5.3
1.62
-
1634.62
... More
Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including westage bend, hook and authorised over lapping shall be measured. DSR 5.22.6
1.32
-
726.75
... More
Providing M.S. foot rests (Step) including fixing in manholes with 345x345x150 cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar. D.S.R. 19.15.1
10
-
334.71
... More
Providing and fixing 100 x 100 x100 mm single equal plain junction of required degree :Sand cost iron of 100 mm diameter. As per IS: 3989. D.S.R 17.44.1
1
-
410.53
... More
Providing and fixing 100 mm dia Sand cast iron Pipe for in let and out let trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : As per IS: 3989. D.S.R 17.60.1.1
2
-
1199.11
... More
Providing and fixing plain Sand cast iron 100 mm diameter bend of required degree. as per IS : 3989.100 mm diameter sand cost iron S&S
1
-
309.78
... More
Providing and fixing waste and vent pipe 50mm diameter of 1.80m. Lenth sand cost iron S&S pipe .S.I.No. 24 (Sanatry materials)
2
-
902.5
... More
Providing and fixing sand cast iron terminal guard (Cowl) 75mm diameter As per IS.No. 3989 75 mm diameter guard (Cowl)
1
-
161.5
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : D.S.R. 17.58.1 & D.S.R. 17.58.3
-
-
-
... More
100 mm
5.5
-
381.68
... More
50mm
5.5
-
261.22
... More
Providing and fixing cast iron Manhole cover of 600x600mm with frame weighting not lessthan 32 kg. S.I.No. 53 (Sanatry materials)
-
-
-
... More
Cast iron Manhole cover
84
-
76
... More
Fixing sand cast spigot and socket, soil waste and ventilating pipes of nominal size 50mm diameter (leasd) caulked joint to be measured and paid separatly N.B.O. No.23.79 (a)
-
-
-
... More
50mm dia pipe
8
-
15.2
... More
Providing and fixing M.S. Stays and clamps for S.C.I. ventilating pipe as per stardand design clams made of 30x3mm flat iron with two bolts and nuts 12mm dia M.S. Slaty 900mm long in beded in cement Concrete block 230x230x150mm in 1:2:4 Cement approved coarse sand and cement (M.R.)
-
-
-
... More
M.S. Stays and Clamps
7
-
237.5
... More
Cast cement concrete as in baffle wall slab precast with cement approved coarse sand and 20mm gauge approved coarse sand and in proportion of 1:1.5:3 Baffle wall
0.09
-
409.12
... More
SOAK PIT 02 NO
-
-
-
... More
Excavation in foundation in ordinary soil (loom, caly or sand) including lift upto 1.50m and lead upto 30m. And including filling, watering and ramming of excavated earth in to the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer in charge.S.I. No. 251
14.71
-
109.25
... More
M-150 class brick work in 1:4 cement and Fine sand of 1.25 F.M, mortar for walls of super structure including necessary cutting and moulding of bricks rquired and also including supply of all material labour and tools and plants etc. required for proper completion of work.DSR 6.4.1
2.61
-
322.78
... More
Providing filling 40 mm brick ballast S.I.No.2 (a)
4.19
-
1482
... More
Providing filling 40 mm brick ballast S.I.No.2 (b)
3.14
-
1429
... More
Providing filling 40 mm brick bats S.I.No.1 (c)
4.98
-
1325
... More
R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. T-beam Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work. DSR 5.3
0.83
-
1634
... More
Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including westage bend, hook and authorised over lapping shall be measured. S.I.No. 504
0.65
-
726
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter. D.S.R. 19.1.1
3
-
307
... More
G.S.T. Will be paid Extra as per GST Notification
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements