Uttar Pradesh Projects Corporation Limited Tender

Visitor Chair Visitor chair with ergonomic design for user comfort & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m³ in seat and (30+25)mm thick having density (32, 32)kg/m³ in back. Leatherite tapestry. The chair shall be supplied with aluminium arm with cushion top. The frame structure shall be cantilever support type made up of MS CRCA chrome plated round pipe of dia. 28.5mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The Seat size shall be 475±10 mm(D) X 550±10 mm(W) and back size shall be 530±10 mm(W) X 500±10 mm(H) from seat. Overall height shall be = 960±10 mm, overall depth = 660±10 mm & overall width = 610±10 mm.

Mid Back Revolving Chair Medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. Fabric tapestry 1mm thick and 300 GSM. Synchro Tilt mechanism . The pneumatic seat height adjustment, user can adjust seat height up to 120mm. Nylon pedestal having pitch circle dia. 700mm. The seat size shall be 465±10 mm(W) X 460±10 mm(D) and back size shall be 480±10 mm(W) X 520±10 mm(H) from seat & overall height = 960±10 mm.

Visitor Chair Visitor chair with ergonomic design for user comfort. The seat and back shall be made of 12mm thick hot pressed commercial plywood padded with high resiliance moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. Fabric tapestry 300 GSM. The the armrest shall be used black integral polypropylene arm completely joint with seat. The frame structure shall be cantilever support type made up of MS/CRCA powder coated round pipe of Dia 25.4mm with 2mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 465±10 mm(Width) X 460±10 mm(Depth) and back size shall be 480±10 (Width) X 520±10 mm(Height) from seat & overall height = 890±10mm(H), overall Depth = 645±10mm(D)

Two Seater Sofa Two seater sofa that shall be constructed from metal insert PU Moulded Seat and back. The complete structure shall be upholstered with leatherite tapestry 1±0.2 mm thick. The understructure shall have SS pipe frame having dia 50mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. The individual seat size shall be 550±10 mm(W) X 440±10 mm (D) X 420±10 mm (H). Overall width = 1260±10 mm, overall depth = 750±10 mm & overall height = 730±10 mm.

Three Seater Sofa Three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 40Kg/m³. The structure shall be upholstered with leatherite tapestry 1±0.2 mm thick. The understructure shall consist of pipe frame leg of SS having cross-section area 30mm X 30mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 510±10 mm(D) X 1540±10 mm(W), seat height = 420±10 mm, overall width = 1825±10 mm, overall depth = 780±10 mm & overall height = 755±10 mm.

High back Revolving Chair Medium back revolving chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. PU arm completely joint with seat. Swivel 360 degree revolving mechanism having upright locking and tilt tension adjustment with anri-shock feature. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm. Black nylon pedestal having pitch circle Dia. 700 mm. The seat size shall be 465±10 mm(W) X 485±10 mm(D) and back size shall be 750±10 mm(H) from seat & overall height = 1260±10 mm.

Visitor Chair Medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. Injection moulded PU arm completely joint with seat. The frame structure shall be cantilever support type made up of MS/CRCA chrome plated round pipe of Dia 25mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 465±10 mm(W) X 485±10 mm(D) and back size shall be 575±10 mm(H) from seat & overall height = 980±10 mm.

High Back Chair High back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam (30+25)mm thick having density (40 & 32)kg/m³ and the back shall be made of (15+6)mm thick double layered moulded plywood padded with high resilience polyurethane foam 30mm thick having density 32kg/m³. Pure leather tapestry 1mm thick. Cushion arm with leather covering top completely joint with seat and back. Synchro knee tilt 360 degree revolving mechanism having four position locking and tilt tension adjustment with anti-shock feature which provides back strength for the chair. The pneumatic seat height adjustment , user can adjust seat height up to 65mm. Pedestal- Aluminium having pitch circle dia. 640 mm. The seat size shall be 515±10 mm(D) X 500±10 mm(W) and back size shall be 600±10 mm(W) X 790±10 mm(H) from seat. Overall height shall be = 1210±10 mm, overall depth/width = 740±10 mm.

High Back Chair High back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of hot pressed commercial plywood padded with high resilience polyurethane foam (50+25)mm thick having density 40kg/m³ in seat and (40+25)mm thick having density 32kg/m³ in back. The same shall be upholstered with leather. The chair shall be supplied with cushion arm completely joint with seat and back. Synchro Knee tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment, user can adjust seat height up to 65mm. The Pedestal should have five legged made of die cast aluminium having pitch circle dia. 640 mm. The seat size shall be 475±10 mm(D) X 530±10 mm(W) and back size shall be 500±10 mm(W) X 780±10 mm(H) from seat. Overall height shall be = 1230±10 mm, overall depth/width = 760±10 mm.

Mid Back Chair Medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of hot pressed commercial plywood padded with high resilience polyurethane foam (50+25)mm thick having density 40kg/m³ in seat and (40+25)mm thick having density 32kg/m³ in back. The same shall be upholstered with leather. The chair shall be supplied with cushion arm completely joint with seat and back. Synchro Knee tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment . The pneumatic seat height adjustment, user can adjust seat height up to 65mm. The Pedestal should have five legged made of die cast aluminium having pitch circle dia. 640 mm fitted. The seat size shall be 450±10 mm(D) X 530±10 mm(W) and back size shall be 510±10 mm(W) X 660±10 mm(H) from seat. Overall height shall be= 1120±10 mm, overall depth/width = 760±10 mm.

Visitor Chair Providing and supplying visitor chair with ergonomic design for user comfort. The seat and back shall be made of hot pressed commercial plywood padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32kg/m³ in back. The same shall be upholstered with leather. The backrest of the chair shall be made by keeping the natural curvature of the spine for lumbar support with the assistance of cushion. The armrest shall be of chrome plated frame padded with cushion with leather covering on top. The frame structure shall be cantilever support type made up of MS/CRCA chrome plated pipe having cross section 40mm x 20mm. There shall be co- polymer polypropylene shoe provided at the base to avoid scratches on the floor as well as uneven surfacing. The seat size shall be 500±10 mm(W) X 500±10 mm(D) and back size shall be 490±10 mm(W) X 550±10 mm(H) from seat & overall height = 960±10 mm, overall width = 600±10 mm & overall depth = 670±10 mm.

Classroom Chair Student/training room chair with ergonomic design for user comfort. The seat and back shall be made of 15mm and 12mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. Fabric tapestry 0.6mm thick and 235 GSM and PVC liping also provide with seat and back. The seat and back shall be arrested together with MS powder coated HR steel spine. The armrest-black integral polyurethane arm completely joint with metal frame. The chair shall be supplied with folding writing pad made of 18mm thick particle board with 0.8mm edge lipping. Book-tray shall be provided under the seat made of powder coated round wires.Frame structure shall be cantilever support type made up of MS/CRCA powder coated with 50- 60µ (DFT) thick round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 460±10mm (D) X 475±10mm (W) and back size shall be 450±10mm (W) X 410±10mm (H) from seat. Overall height shall be = 820±10 mm, overall depth = 665±10 mm & overall width = 540±10 mm.

Visitor/ Offi‹ce Chair Visitor chair with ergonomic design for user comfort & shall have asthetically appealing. The seat and back shall be made of 15mm and 12mm thick hot pressed commercial plywood paded with high resilience polyurethane foam 40mm thick having density 40kg/m³ in seat and 19mm thick having densitry 40Kg/m³ in back. The same shall be upholstered with leatherite tapestry. The chair shall be supplied with PU armrest mounted on CRCA pipe frame. The frame structure shall be cantilever support type made up of MS CRCA chrome plated round pipe of Dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 475±10 mm(D) X 480±10 mm(W) and back size shall be 460±10 mm(W) X 400±10 mm(H) from seat. Overall height shall be = 815±10mm, overall depth = 670±10 mm.

Three Seater Waiting Bench Two seater bench, the seat and back shall be made up of high quality cold rolled MS perforated sheet of 1.2mm thick, pressed and welded to form the shape. The seat and back electrostatically coated with epoxy powder and then cured under heat to allow it to form a skin. The seat and back shall be upholestered with Latherite Tapestry. The armrest shall be made up of mild steel powder coated tube with 1.2mm thick. The base structure shall be supported by MS powder coated with 40-50µ (DFT). There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 450±10 mm(D) X 430±10 mm(H) from ground. Overall height shall be = 755±10 mm, overall depth = 710±10 mm & overall width = 1750±10 mm.

Multi-use chair Medium, back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam 40mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover with breathable mesh tapestry. The backrest shall be made by keeping the natural curvature of the spine with lumbar support as well as head support. The seat and back shall be arrested together with 50-60µ thick HR steel spine and the armrest shall be used P.U Adjustable Button Operated PP Cladding completely joint with seat. Synchro tilt 360 degree revolving mechanism with one position Locking. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 120mm to suit them using the lever under the seat. The seat size shall be 450 x 500mm(W x D) Foam Net in Seat with Polyurethane Foam and back size shall be 515 x 585mm (W x H) Mesh Back in Black PP Structure. Overall height shall be = 1100±10 mm, overall depth = 770±10 mm, overall width = 770±10 mm.

One Seater Sofa Single seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have 75 mm Height. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat height = 430±10 mm, overall width = 1010±10 mm, overall depth = 860±10 mm & overall height = 870±10 mm.

Two Seater Sofa Two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have 75 mm Height. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat height = 430±10 mm, overall width = 1430±10 mm, overall depth = 860±10 mm & overall height = 870±10 mm.

Three Seater Sofa Three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. Leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have 75 mm Height. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat height = 430±10 mm, overall width = 1900±10 mm, overall depth = 860±10 mm & overall height = 870±10 mm.

Table (1500x750x750mm) Executive table with an overall size 1500mm X 750mm X 750mm. The top shall be made up of 18mm thick Pre-laminated particle board approved laminate and finish as per approved shade. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC edge bending. The top shall be supported on CRCA C-frame with 0.9mm thick duly powder coated. The understructure shall consist of MS/CRCA rectangle pipe frame having cross-section area 38mm X 25mm with 1.2mm thick. Fixed top supporting pedestal shall be supplied at one side of the table. The pedestal shall be made up of 0.8mm thick high yield strength CRCA sheet of grade 'D' confirming to IS:513. It should have 3 nos. of drawer i.e. 2 box and 1 filing with centralized locking mechanism. The table shall be clad with modesty panel. It should be 18mm thick made up of Pre-laminated particle board. There shall be leveller provided at the bottom.

Executive Table (2450x2200x750mm)- Modular table in completely knock down conditions with an overall size 2450mm X 2200mm X 750mm that is to be assembled at site. The worktop shall have the size 2200mm X 1000mm x 76mm thick made up of Medium Density Fibre-board with approved veneer laminate and PU polish accordingly. The table top profile shall be in rectangle shape with round corners and full round post forming edges. The table top shall be supported on MDF board based gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 76mm thick medium density fibre-board and profile shall be in moulded construction with full round post forming edges and duly deco painted. The table shall be clad with 18mm thick modesty panel. The table shall have side unit for storage purpose with an overall size 2200mm x 600mm X 600mm. It shall have 2 nos. of drawer, 1 nos. of filling space with door and 1 nos of open space. Drawer facai, sides and all other shall be made in 18mm thick and drawer base shall be 9mm thick. The complete structure shall be supplied with approved veneer laminate, PU polish and deco painted.

Table (2850x2100x750mm) Modular table in completely knock down conditions with an overall size 2850mm X 2100mm X 750mm that is to be assembled at site. The main top shall have the combination of PLPB board and MDF board. The table top shall have the size 1800mm X 900mm made up of 25mm thick Post- forming laminate board. The base top shall be made up of 25mm thick Medium density fibre-board with black deco painted. The table top profile shall be in rectangle shape with top and base top full round post form. The connecting top shall be made up of 25mm thick Medium density fibre- board having an overall size 1050mm X 1200mm/900mm. The connecting top shall be in round shape with deco black painted and full round post forming edges. The table top and connecting top shall be supported over MDF board based gable end leg and metal base pole leg respectively. The end wall of the table on the side shall be topped by gable end. It shall be made up of 25mm thick MDF board and profile shall be in linear shape with deco black paint. The gable end lag shall be 50mm thick made up of MDF board. The table shall be clad with 18mm thick modesty panel. The side top shall be provided with an overall size 1200mm X 600mm X 730mm with 25mm thick Post forming laminate and 25mm thick MDF board base plingth. The side top profile shall be in rectangle shape with full round post form edges. The top shall be supported over 50mm Peg which mounted over the fixed pedestal. The fixed pedestal shall be provided for the storage purpose with on overall size 400mmX580mmX630mm. It Shall be made up of Pre-laminated particale board with the top 25mm thick drawer base 9mm thick and other parts 18 mm thick like shutter, back, side panel etc. A mobile pedestal overall size 400mm X 530 mmX 560mm. The pedestal shall be made up of pre-laminated board. 1 box drawer and filling drawer.

Back unit (900x450x2000mm) Storage unit with an overall size 900mm X 450mm X 2000mm. Storage shall be made up of Pre-laminated particle board . All profile i.e. side, back, top, shutter, skirting shall be 18mm thick and the edges shall have edge bending. The storage shall have 3 nos. of adjustable shelf and 1 fixed shelf. 2 normal shutter and 2 glass shutter shall be provided for closing and opening the shutter. The glass shutter shall be made 4mm clear glass insert within aluminium profile. The shutter shall be operated with concealed crank hinge with SS handle as well as MP lock mechanism. There shall be buffers provided at the base to avoid scratches on the floor.

Table (1800x1600x750mm) Executive table with credenza unit in completely knock down conditions with an overall size 1800mm X 1600mm X 750mm that is to be assembled at site. The worktop shall have the size 1800mm X 700mm made up of 25mm thick- Post Formed particle board. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC Edge banding. The top shall be supported on CRCA powder coated I Leg & pipe having cross-section area. The table shall be clad with Metal modesty panel which provide structural support for the table & Metal Pedestal 2drawers +1Filing, There shall be shoe provided at the base to avoid scratches on the floor. Side top shall be provided with an overall size 900mm X 450mm X 725mm made up of 25mm thick Post formed particle board. It shall be supported on Metal I Leg CRCA Powder coated along with hanging two drawers pedestal CRCA Powder coated All the size shall have the tolerance of upper and lower deviation of ±10mm for board & ±0.2mm for metal.

Round Table Conference-17 (Dia 1200mm x Height 750mm)- Conference table in completely knock down conditions with an overall size Dia. 1200mm X 750mm that is to be assembled at site. The table top shall be made up of 25mm thick Pre-laminated particle board . The table top profile shall be in circular shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC edge banding. The table shall be supported on MS powder coated round pipe having 50mm dia with 1.6mm thickness and over particle board gable end of 18mm thickness. The table understructure shall have 4 nos. of legs. The table is provided with 8mm thick bottom plate and 5 mm thick top plate. There shall be gliders provided at the base to avoid scratches on the floor.

Reception Table Supplying & Placing Reception table in completely knock down conditions with an overall size 2465mm X 1125mm X 1000mm that is to be assembled at site. The top shall have the size 1340mm/737mm X 650mm made up of 25mm thick Pre-laminated particle board. The edges shall be sealed with 2mm thick PVC edge banding. The table shall have upper top shelf with an overall size 1489mm/1303mm X 200mm made up of 10mm thick toughened glass. The top profile shall be in half round shape. The end wall of the table on the side shall be topped by gable end. The gable end shall have the size 430mm X 520mm. It shall be made up of 18mm thick Pre-laminated particle board and profile shall be in linear shape with Appropriate PVC edge banding. The table shall be clad with 1.2mm thick modesty panel which provide structural support for the table. The top and bottom modesty panel shall have the size 1340mm X 208mm and 1340mm X 680mm respectively with 1.2mm thick SS 202 grade sheet duly frush finish in round shape perforated connected with both end. The top and upper top shall be supported on MS powder coated leg.

Table (900x900x750mm) Supplying & Placing cafeteria table with an overall size 900mm X 900mm X 750mm. The top shall be made up of 25mm thick Pre-laminated particle board. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC edge banding. The top shall be supported on MS/CRCA rectangle pipe frame having cross-section area 70mm X 20mm with 1.6mm thick. The understructure shall consist of four legs made up of MS round pipe having dia. 38.1mm with 1.6mm thick. The Joints shall be made using TIG welding. The metal parts shall be powder coated to dry film thickness of 40-60µ.

Table(1800x900x750 mm) Supplying & Placing cafeteria table with an overall size 1800mm X 900mm X 750mm. The top shall be made up of 25mm thick Pre-laminated particle board. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The top shall be supported on MS/CRCA rectangle pipe frame having cross-section area 70mm X 20mm with 1.6mm thick. The understructure shall consist of four legs made up of MS round pipe having dia. 38.1mm with 1.6mm thick. The Joints shall be made using TIG welding. The metal parts shall be powder coated to dry film thickness of 40-60µ.

4 Seater Table Conference (1800x900x750mm) Conference table in completely knock down conditions with an overall size 1800mm X 900mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall be made up of 25mm thick Pre- laminated particle board. The table top profile shall be in rectangle shape with round front and back and the edges shall be sealed with 2mm thick thin strip of impermeable PVC edge banding. The table shall be supported on particle board base gable end. The end wall of the table on the side shall be topped by gable end.It should be made up of 25mm thick Pre-laminated particle board and profile shall be in linear shape with full round post form and other edges sealed with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end.

6 Seater Table Conference (2100x900x750mm) Conference table in completely knock down conditions with an overall size 2100mm X 900mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall have the size 2100mm X 900mm made up of 25mm thick Pre-laminated particle board. The table top profile shall be in rectangle shape with round front and back and the edges shall be sealed with 2mm thick thin strip of impermeable PVC edge banding. The table shall be supported by particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall have the size 600mm X 715mm. The gable end shall be made up of 25mm thick Pre- laminated particle board and profile shall be in linear shape with full round post form and other edges sealed with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. The modesty panel shall have an overall size 1500mm X 600mm with 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end.

Side Table Cafe table with an overall size 900mm Dia. X 750mm. The top of the table shall be made up of 38mm thick pre laminated particle board. The top profile shall be in circular shape and edge banded top. The top shall be supported on SS pipe frame having cross section area 30mm X 15mm. The table under structure shall be made up of SS pipe frame of 63mm Dia. and legs having crooss section area 50mm X 10mm with mat finish. There shall be leveler shoe provided at at the base to avoid scratches on the floor.

4 Door Book Case Metal book case with an overall size 915 mm (W) X 320 mm (D) X 1750mm (H). The book case shall be supplied with 4 nos. of individual compartments. All components shall be made of 0.8mm high yield strength CRCA sheet of grade ‘D’. Each door shall have individual locking provision and 4 mm thick transparent glass for clear inside vision secured in a metal frame through rubber gasket. Each door shall have scissor mechanism for receding inside the top of respective compartment which ensures parallel & smooth movement. Each door shall have plastic side end caps as handle which is easy to grip. Each compartment has a storage shelf having Uniformly Distributed Load Capacity of each shelf is 40 Kg maximum. The finish is Epoxy Polyester Powder coated to the thickness of 40-60µ. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure.

Double Sided Book Rack Double side steel Library Racks in perfectly upright and straight position. The overall size of the rack shall be 940mm (W) X 600mm (D) X 2110mm (H). The rack shall be supplied with 4 nos. of adjustable shelves on both side i.e. 10 loading levels. Rack, side panel, skirting shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’. Side and top shall be covered with 18mm thick Pre-laminated particle board. The edges of the board shall be sealed with 2mm thick PVC edge bandin. The shelves shall be folded constructions which have intrinsic rigidity and high load carrying capacity. Each shelf shall be provided with stiffener at bottom for strength and back stiffener for separator between front and rear shelf. All steel components shall be epoxy polyester powder coated to the thickness of 40-60µ.

Magzine Rack Overall Dimensions of All Steel Periodical Display Rack shall be 900mm (W) x 450mm(D) x 1850mm(H). Rigid Knockdown construction Panels shall be made from CRCA 0.8 mm thick and front frame shall be made from CRCA 0.8 mm thick . There shall be 5 level racks , Display tray shall be suitable for fullscape size magazines, periodicals, aesthetically appealing metal tray at an angle for easy viewing . Receding facility to access the storage behind . Sliding on plastic rollers . Behind storage shelving each of 5 level has a behind storage shelf . Uniformly Distributed Load capacity per each shelf is 40 kg . Leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns .

2 Door Locker Overall size of Personal Locker Unit with add on units shall be of dimensions 380mm(W) X 450mm(D) X 1800mm(H) having 2 locker unit. Stackability shall have add - on units that can be stacked width wise to form bank of lockers having common side panel. Each locker shall have 1 nos. of Hanging rod. Locking shall have cam lock with lock lever plus option. Material shall be CRCA 0.8 mm thickness. Shelf shall be uniformly distributed load capacity per each shelf level is 35 Kg maximum. Finish shall be epoxy polyester powder coated to the thickness of 50 microns. Handle/Label holder shall be aesthetically appealing Snap fit ABS plastic handle. Ventilation shall be attractive punched pattern for ventilation.

Steel Almirah Steel almirah in perfectly upright and straight position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. All components shall be made of 0.8mm thick high yield strength CRCA sheet. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50-60µ.

Open Rack (900x450x1800mm) Slotted angle rack with an overall size 900mm (W) X 450mm (D) X 1800mm(H). The panel shall have 5 nos. of shelves made up of 0.8mm thick high yield strength CRCA sheet. CRCA slotted angle shall be supplied with 2mm thick having size 40mm X 40mm. All steel components shall be 40- 60µ thick (DFT) powder coated after 7 tank pre-treatment process flow. Corner plate (gussets) and fasteners shall be provided for complete assembly.

4 Drawer Vertical Filing Cabinet Vertical filing cabinet. The overall size of the cabinet shall be 470mm (W) X 620mm (D) X 1320mm (H). The cabinet shall be supplied with 4 nos. of drawer. The drawer shall be operated with aesthetically appealing snap fit ABS plastic handle and ball bearing base telescopic channel. All drawers shall be synchronized locked with central locking mechanism by one single key. Uniformly distributed load capacity of each drawer shall be 15/20 Kg. The entire body panel and shelves shall be made of prime quality 0.8mm thick CRCA sheet. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40- 50µ thick.

Patient bed with locker for general wards Specifications of Non-Motorised Beds with Adjustable Beside Table & Bedside Locker Size approx 2160mm L x 1020mm W x 450mm to 810mm Height (without mattress) Bed Platform size 2070mm L x 960mm W, Mattress Platform Size 1900mm Lx865mm W Polypropylene detachable tops fitted on four section top bed frame with perforated design for easy breathing of mattress -Back rest and leg rest both shall have detachable mattress guards (3 nos on each section respectivel) -Back rest: min. 45% of the frame length -Back rest, knee rest and height adjustment positions operated by manual adjustment and shall have trendelenburg/revers Trendelenburg up and down positions -Lower leg section should be adjusted by ratchet mechanism -Manual pull lever on both sides of bed to quickly bring bed to a flat position. -Bed frame shall be mainly made from 50x25mmx2mm thick ERW tube with proper support. This frame should be fitted on the base frame mainly 60x30x1.6mm ERW tubes on various supporting links -The base frame shall be mounted on 125 mm dis non-rusting twin wheel castor with central & directional locking mechanism -Twin wheel castors with castor housing and wheels made from high grade non floor staining synthetic materials and integrated thread gaurds. Wheel centre having precision ball bearing to run smoothly. -The bed shall have polymer moulded head and foot side panels detachable by hand without need of any tool. Four corner rubber buffers. -Bed shall have splittype swing down railing, 2 on each side (head and middle sections) made from polymer moulded material. These shall be fitted to the mattress support sections and should be able to raise and lock thourgh spring lock mechanism thourgh an operating lever. When put down, they should undergo and level with bed frame -Railing shall avoid any finger and neck entrapments and comply with IEC standards 60601-2-52 -31.7mm dia; 18G stainless steel outer covering tube with a knob to mount syring pump. -Built-in bed extension of approx 200mm shall be provided. -Electrical Specification: Normal 230V AC, Switch Mode power supply operating range 90V to 300V; 47/63 Hz; Max 2A Electric shock protection. Class 1 Degree of shock protection: Type B Liquid Ingress Protection: IP54, Rechargable batteries: 2x12V sealed lead/Acid gel Duty cycle: 10% (2 min for every 18 min) -It should be burr free -Accesories: -12mm diameter stainless steel SS304 telescopic heavy duty IV rod with 2 hooks with provision to park when not in use. -Urine bag holdar-one Chart holdar-one -Four section matresses with 4 inch thick PU Foam of 40 density, covered with superior cover material (water proof, anti-bacterial and flame retardant properties) -Oxygen cylinder Cage -Traction pulley attachment for trauma cases should be provided 30 bed units Adjustable Bed Side Table -Overall size of top should be 810mm x 352mm W Fitted with gas mechanism shall have latch pressing mechanism for lowering down the table top: the raising of the top shall be done by merely lifting up without pressing the latch. The gas spring shall be housed in aluminium extruded telescopic section of smooth sliding up and down from aprox 760 to 1050mm Two sections top shall be fixed on 19mm squire ERW tube frame work. Fixed section is provided with rounded SS Railing of mm dia rod on three sides. Bigger section of the table top should be hinged & could be inclined to raise position options front side of bigger section of the top should be provided with raised PVC edge to prevent things from slipping off top. 5. Base of adjustable table should be made from 40mm x 20mm x 16 G rectangular tube welded to 40mm x 75mm x 5mm thick channel connecting length 640mm and should be fitted with four castor Wheel Dia 50mm. M.S. Tublar part, Linkage, flats are to be in House, Pre-treated, Shot Blasting and Epoxy powder coated as per ISI standard, 50 to 60 microns. Bed Side Locker Over all approx. size 40cms x 40cms x 82cms H. Body consisting of 2 sides and back, is make from one piece of 20gms CRCA sheet. Fitted with laminated top with raised edge on Four sides and praised with PVC foil. Drawer front and cabinet door also made from laminated material and praised with PVC foil PVC foil used is of scratch-resistant and UV-rays resistant of 400 microns thick. One drawer 90mm H x 355mm W x 380mm D approx fitted with very smooth sides, is provided below the top. Under the drawer is an open storage space and below it is a closed-door cabinet. Door of the cabinet box is pivoted at top and bottom. Base of the drawer is fitted with castors of wheel dia 50mm, all without brake Two buffers shall be provided at rear side of the locker box All MS part are passed through 8 tank pre treated powder coated process. SS part finished with mat polished. Bed Formica colour should match with over bed table top and beside locker top

Revolving Stool with SS top Overall Dimension: Overall Sizes Diagonal Leg Dia 538 mm H510 min- 690max. Top plate made of SS 304 made sheet with spin section of thickness 1mm & non corrosive. It has a diameter of 305mm, seat base made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm is used for height adjustment of the seat base. The round hub made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub is welded with the legs and it accommodate and cover the lead screw mechanism. The under-structure consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg give a round & clean look. All the legs is Provided with 4 nos of Nylon-6 bush. All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating

Examination Couch Overall approx. dimension: 1875mm L X 640mm X 850mm H. Table top approx. dimension: 1875mm L X 575mm W. Construction made from mild steel CRAC tubesand sheets. Two section mild steel CRAC sheet top. Headrest adjustable on gas spring . Three drawers with locks. Three cabinets with one having locks. Complete with B.P apparatus tray, Foam mattress covered with rexine. Pretreated and powder coated finish

MS Saline Stand Stainless steel tubular pipe. Four hook S.S adjustable IV rod with a brakelite knob. Five -legged plastic base mounted on 5cm castors.

Attendent Bed with Mattress Size-1800mmX610X380mm, Attendant bed with built in cushion, Top frame made from 50X25mm ERW tube, Legs 30mmX30 mm ERW tube with nylon with cator wheels, 3 horizontal supports

GST Extra as applicable