Uttar Pradesh Projects Corporation Limited Tender

SITC of exterior rated Architectural RGBW Linear LED Wall Washer luminaire suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass with high impact resistance strength of thickness and die casted end caps, Total System wattage not exceeding 80W-100W with system lumen output should be more than 3000lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 90mm ± 5% including surface mount base width 80mm ± 5% , length 1000 mm ± 5% with constant locking hinges for simple position control from various angles without special tools. DMX enabler circuit should be inside the Luminaire only. The rated voltage of the Luminaire should be 230Vac, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 100-300VAC, PF 0.90 and must have safety operation range form 90V - 176Vac. Life time of LED driver should be 80,000 hours , Led driver must have SELV output and Case temperature i.e. Tc 90°C. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 50000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. The product should be BIS approved with R number mentioned on product label. Required documents- LM79,TDS,TTR, BIS Report and LEDs Test Reports.Inbuild Potted IP67 electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection ,Surge Voltage Protection upto 10kV with SPD & other safety test as per IS 15885 Part-2/ Sec 13, IEC60598-1,shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc.as per approved design, O&M 5 Years.Make:Erco/Wipro/Havells.

SITC of exterior rated Architectural LED RGB/RGBW flood lighting luminaire;suitable for facade lighting with Die-cast aluminium housing, powder-coated finish, Clear toughened glass with high impact resistance strength of thickness, Total System wattage not exceeding 200W-250w with system lumen output should be more than 9000 lm(±5%) with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 454 mm±5% including mounting hinge , diameter 340 mm ±5% with constant locking hinges for simple position control from various angles without special tools.Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor 0.9. The product should be BIS approved with R number mentioned on product label. Required documents- LM79,TDS,TTR, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5),other safety test as per IS 15885 Part-2/ Sec 13, IEC60598-1, and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc.as per approved design, O&M 5 Years.Make:Erco/Wipro/Havells

SITC of exterior rated Architectural LED RGBW flood lighting luminaire; suitable for facade lighting with Die-cast aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness, Total System wattage not exceeding 600W- 650W with system lumen output should be more than 22000 lm ±5% with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture shall be suitable to operate at an ambient temperature range of -30°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 70000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only.. Luminaire shall be complete with integrated BIS IP 66/67 potted driver and capable of operating at line voltage from 90-305 Vac, 50Hz with power factor 0.9. The product should be BIS approved with R number mentioned on product label.Required documents- LM79,TDS,TTR, BIS Report and LEDs Test Reports.Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5),IS 15885 Part-2/ Sec 13,IEC60598-1, and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc.as per approved design, O&M 5 Years.Make:Erco/Wipro/Havells.