Uttar Pradesh Projects Corporation Limited Tender

... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.

Uttar Pradesh Projects Corporation Limited - UPPCL Tender

Works
Electrical and Electronics
Electrical Works
Eprocure
Opening Date6 Mar 2025
Closing Date20 Mar 2025
Tender Amount₹ 3,21,07,000 
Notes
Download

AI Insights

Class Of Bidder
... View More
Category-A
Bid Capacity
... View More
Bidding Capacity = {[AxNx2.5]-B} Where, A = Maximum turnover in construction works executed in any one year during the last seven years N = Number of years prescribed for completion of work for which bids have been invited. B = Value of existing commitments and ongoing works to be completed during the period of completion of work for which bids have been invited. Security Deposit = 5.0% of the tendered value of the work + GST For three similar works: 3 * 0.4 * Tendered Cost For two similar works: 2 * 0.5 * Tendered Cost For one similar work: 1 * 0.8 * Tendered Cost And one work of any nature: 0.4 * Tendered Cost
Technical Capacity
... View More
The bidder should have experience in similar class of works completed, with the experience of similar works highlighted and a list of all works of similar nature successfully completed during the last seven years furnished. For building works, the requirements are as follows: - Up to four storey buildings: No binding - Five to ten storey buildings: Minimum one building of Five storeys or completing balance construction work of one building (including structural work) minimum up to five storeys - Eleven to fifteen storey buildings: Minimum one building of Eight storeys or completing balance construction work of one building (including structural work) minimum up to eight storeys - More than fifteen storey buildings: Minimum one building of Ten storeys or completing balance construction work of one building (including structural work) minimum up to ten storeys Each basement, stilt constructed in the building shall be considered as a storey. In case the work involves construction of two or more basements, then it is to be stipulated in the definition of similar work that the agency should have executed one similar work with a minimum of one basement under one Agreement. The bidder should have completed similar works in the last 7 years, with the following requirements: - Three similar works each costing not less than 40% of the estimated cost. - Or, two similar works each costing not less than 50% of the estimated cost. - Or, one similar work costing not less than 80% of the estimated cost. For specialized works such as pile work, aluminum work, steel structure work, metallic roofing work, and water proofing work, the bidder should have completed similar works with the following requirements: - Three similar works each costing not less than 40% of the cost of the job in the tender. - Or, two similar works each costing not less than 50% of the cost of the job in the tender. - Or, one similar work costing not less than 80% of the cost of the job in the tender. The cost of work shall mean the gross value of the completed work, including the cost of material supplied by the Government/client, but excluding the cost of establishment. The bidder should have an average annual financial turnover (gross) of a minimum of 30% of the tendered cost in Civil/Electrical construction work during the last available three-year consecutive balance sheets duly audited by a Chartered Accountant. The bidder should also have a solvency of 40% of the estimated cost from a bank or 10% solvency of the estimated cost from the District Magistrate. The bidder should not have abandoned any awarded work before its completion and should not have been debarred or blacklisted for tendering in any organization. The bidder's performance for each work completed in the last Seven years and in hand should be certified by an officer not below the rank of Executive Engineer/Project Manager or equivalent. The bidding capacity of the contractor should be equal to or more than the work put to tender, calculated using the formula: Bidding Capacity = (A x N x 2.5) - B, where A is the maximum turnover in construction works executed in any one year during the last seven years, N is the number of years prescribed for completion of work, and B is the value of existing commitments and ongoing works.

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Wiring point for plug with 1.5 Sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 Sq. mm FRLSH PVC insuleted multistrand copper conductor cable as earthwire drawn inside the conduit, Modular type switch & socket etc. complete in all respect with Modular Box & Cover plate.

200

1002

200410

... More
Wiring point for call bell with 1.5 Sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 Sq.mm FRLSH PVC insuleted multistrand copper conductor cable as earthwire drawn inside the conduit. Modular type bell push or 2 pin socket etc. complete in all respect with Modular Box & Cover plate. etc on Surface.

110

1002

110225.5

... More
Supply and wiring of submain with two number 1.5 sq.mm. PVC insulated 1100 V grade single core aluminium conductor cable in 20 mm dia. heavy guage rigid steel conduit on surface, with one number 8 SWG GI earth continuity wire etc, complete in all respects.As in item no.1311(B) but in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit.

20982

159

3339285.3

... More
Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C.

21000

187

3944640

... More
Supply and wiring of submain 2 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FRLSH PVC insulated multistranded copper conductor. cable as earth contunity wire etc. complete in all respects.

12000

228

2737680

... More
Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty( 2 mm thick ) 25mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 4 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

2500

299

749650

... More
Supply and wiring of submain 4 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty ( 2 mm thick ) 32mm dia PVC conduit along with two numbers 6 sqmm FRLSH PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.

2700

686

1853469

... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20mm

8000

87

699440

... More
25 mm

3000

99

297120

... More
32 mm

1800

125

226224

... More
SUBHEAD II-DISTIBUTION BOARD Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door

10

1757

17575.1

... More
6 way, Double door

12

1506

18081.96

... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole and Neutral

100

409

40915

... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A

22

706

15538.16

... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB

12

2579

30958.92

... More
S&F of 200 Amp 4 pole MCCB (25 KA) Thermal Magnetic release Cat A

4

15423

61694.8

... More
S & F surface/Flush mounting 6ways V TPN distribution board with additional Door without DPX3 160 MCCB complete in all respect,as directed at site by Engineer in charge. Cat A

10

10662

106622

... More
Supply fixing and making connection of following MCBS complete in all respects as per direction and satisfaction of engineer-in-charge.(CAT: A) 40 Amp. FP MCB (10 KA) C Curve

6

2024

12148.5

... More
63 Amp. FP MCB (10 KA) C Curve

6

2038

12228.6

... More
Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

600

302

181560

... More
S & F sheet steel enclosure surface/Flush mounting fitted with 30Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site by Engineer in charge.

120

3070

368460

... More
S & F surface/Flush mounting 6ways VTPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge.CAT A

18

8410

151389

... More
S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve.CAT A

664

658

437310.4

... More
SUBHEAD III- COMPUTER POINT SYSTEM S/F MODULAR BOXES, BASE & COVER PLATE :- Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75 mm)

170

203

34603.5

... More
S/F MODULAR TYPE SWITCH / SOCKET :- Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 3 pin 5/6 amp socket outlet

200

83

16666

... More
Telephone Socket outlet

70

101

7076.3

... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. 200 mm width X 50 mm depth X 1.6 mm thickness

650

470

305909.5

... More
300 mm width X 50 mm depth X 1.6 mm thickness

350

530

185759

... More
150 mm width X 50 mm depth X 1.6 mm thickness

800

412

330056

... More
Supplying and fixing PVC batten/ angle holder including connections etc. as required.

300

75

22542

... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

500

59

29715

... More
P/F following size / modulars GI box along with modular base and cover plate for modular switches in recess etc. 3 Module ((100mmX75mm )

400

234

93716

... More
6 Module (200mm x 75mm )

500

274

137295

... More
12 Module (200mm x 150mm )

300

373

112089

... More
18 Module (213mm x 215mm )

150

578

86775

... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.600 mm width X 50 mm depth X 2.0 mm thickness

200

1222

244536

... More
SUBHEAD IV-MISCELLENEOUS Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

150

1864

279712.5

... More
Supply fixing of electronic fan regulator(Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.

150

460

69019.5

... More
Supply fixing of DAIKIN or equivalent make NON INVERTOR split Unit(2.0tr). Complete in all

30

64525

1935750

... More
Supply fixing of stabilizer 5kva. Complete in all

30

13795

413850

... More
Supply and Fixing of round sheet .complete in all

1200

8

10680

... More
Supply and Fixing of Fan sheet .complete in all

150

4

667.5

... More
Supply and Fixing of PVC Junction box .complete in all

240

311

74760

... More
Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA

300

4343

1302960

... More
Supply & fixing of LED Tube Light with Metal heavy dutyBox type batten Light fitting 1 x 22 watt suitable for up to 1 x 22 watt LED Polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects.(CAT: AAA)

650

1059

688415

... More
Supply & fixing of AC Box 32 Amp. complete in all respects.

30

1352

40584

... More
Supply and fixing of 6 Amp to 32 Amp DP MCB (10KA) (C curve) for poles

74

658

48736.4

... More
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN complete in all respect. 15 Amp SPN

12

15308

183696

... More
Supply, Installation, Testing & Commissioning of 2MP IP Network TDN Low-Light IR Rugged Dome Camera

40

4895

195800

... More
Supply, Installation, Testing & Commissioning of 2MP IP Network TDN Low-Light IR Rugged Bullet Camera

20

28480

569600

... More
SlTC of 32 channel N RV 4K (Network VG ideo Recorder) for recording upto 32CH @ 104 SATA HDDs minimum 32 TB Storage or more (recording requirement all cameras recording at 5 MP 30 days)

4

287036

1148146.28

... More
Supply, Installation, Testing & Commissioning of POE switch 8 Channel.complete inall.

12

2269

27234

... More
Sub Station Room.(Civil Work)

1

1354215

1354215.98

... More
Sub Station Room.(Civil Work)

1

154113

154113.61

... More
Providing and fixing in floor and wall face Ringfit UPVC ASTRAL ULTRADRAIN pipe.110 dia

800

569

455680

... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

30

8723

261691.2

... More
Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( extra depth =.75-.45=.3)

30

6028

180848.1

... More
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.

700

240

168378

... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round pipes including bed concrete as per standard design 200 mm diameter

700

939

657657

... More
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

55.06

347

19126.74

... More
SUBHEAD V-EARTHING SYSTEM Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

8

9452

75617.36

... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

250

482

120560

... More
Providing and fixing 32mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

125

774

96787.5

... More
Supply and fixing of one number 8 SWG G.I wire in 15mm dia. G.I pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.

125

178

22250

... More
SUBHEAD VI-CABLES Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. 25 sqmm 3.5 core

350

331

116189.5

... More
16 sqmm 4 core

350

305

106844.5

... More
10 sqmm 4 core

275

264

72690.75

... More
50 sq. mm 3-1/2 core

160

437

70060.8

... More
95 sq. mm 3-1/2 core

155

623

96565

... More
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire 25 sqmm 3.5 core

46

109

5035.62

... More
16 sqmm 4 core

55

77

4258.65

... More
10 sqmm 4 core

80

77

6194.4

... More
50 sq. mm 3-1/2 core

24

158

3802.08

... More
95 sq. mm 3-1/2 core

16

197

3161.28

... More
Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 25 Sq.mm

118

24

2835.54

... More
16 Sq.mm

100

18

1869

... More
10 Sq.mm

180

18

3364.2

... More
50 sq. mm 3-1/2 core

40

42

1708.8

... More
95 sq. mm 3-1/2 core

20

78

1566.4

... More
Supply and erection of incoming adopter box for mounting 800 Amp. TPN CFS unit including connectors of required capacity on to the rising Mains complete in all respect.

1

14960

14960.9

... More
L.T. PANEL Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 ) and TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfonners and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming- 1000 Amp / 415 Volt ACB-1 No Outgoing 630 Amp ACB-1No & 400 Amp MCCB,-1 No Cat. B. Cubicle Type

1

708707

708707

... More
630 Amp MCCB-1No & 400 Amp MCCB,-1 No Cat. B. Cubicle Type

1

547973

547973

... More
630 Amp ACB-2Nos. Cat. B. Cubicle Type

1

843631

843631

... More
630 Amp MCCB-2Nos. Cat. B. Cubicle Type

1

549753

549753

... More
GST extra as per applicable

-

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.