Uttar Pradesh Projects Corporation Limited Tender

110MM PVC slotted pipe of ISI mark.

P/ F 50mm GI pipe (B) class.

Nylon mesh for filter.

Plastic dori.

Solvent cement.

110mm End cap.

110mm Submersible cap.

50mm MS clamp (Heavy).

50mmGI elbow.

50mm X 110mm GI nipple.

2 HP 9 Stage submersible pump of ISI mark with automatic panel.

2.5 sqm. Submersible cable.

Drilling charges for 6" dia tubewell.

Pea Gravel.

2" MS socket.

Cartage of material upto site.

Fixing testing and commissioning of Pumpset with lowering & Electric wiring with starter etc. complete as required.

Making Apron

Excavation in foundation in ordinary soil (Loam Clay or sand) including lift upto 1.5m (5fts) and lead upto 30mm (100fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directd by the Engineer-in-Charge upto a distance of 30m (100 fts) from the foundation trenches.

Providing and laying in position cement concrete excluding the cost of centering and shuttering. (in all type of work upto plinth level) by 1:4:8 (1 cement : 4 coarse sand : 8 graded stone agg. 40 mm nominal size)

P/L polythene sheets in 125 micron below the top coat I/C all cost of material & labor work complete in all respect

Making construction/expension joint in top coat of C.C. Road /C all cost of material & labor work complete in all respect.

P/L PCC in 1:2:4 of C.C.road I/C all cost of material & labor work complete in all respect.

Trimixing of the surface of the cement concrete laid.

Providing and laying of 80mm thick M-30 Interlocking including 4cm thick fine sand cushion and 3cm th. Fine sand filling over entire surface of interlocking and gaps and corner filled with 1:3 cement mortar inlcuding cost of P.C.C. and edging etc.

Dismantling of existing plaster including disposal of refuse as direct by engineering-in-charge with in a distance of 60mt. (200feet) (Exterior Side)

12mm thick plaster in with 1:6 cement & coarse sand with all labour, T&P complete.(Exterior side)

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade :including supply of material, labour T&P etc. required for proper completion of the work.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Mild steel or iron work of small sizes and sections such as Grill etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.

Stainless Steel water cooler

(Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra)

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

Supply and fixing of one number 8 SWG G.I wire in 15mm dia. G.I pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.

Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. 50 sqmm 3.5 core

16 sqmm 4 core

Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire 50 sqmm 3.5 core

16 sqmm 4 core

Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 50 sqmm

16 sqmm

MAIN L.T. PANEL-Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.

Incoming : 200 Amp. MCCB-1 No Metering : One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch, One (1) No. (0-200A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc. One (1) Set of Phase Indication Lamp. Bus Bar : One (1) No. 200 A, TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided.(a) 100 Amp MCCB- 1 No (b) 63 Amp MCCB-3 No

GST Extra as per applicable