Uttar Pradesh Projects Corporation Limited Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 Feb 2025
Closing Date5 Mar 2025
Tender Amount₹ 1,01,47,889.12
Costs
EMD
₹ 2,04,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPPRC_1008490_4Tender No
72/GM-5/UPPCL/2024-25Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying in position ready mixed or site batched design mix cementconcrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.Concrete of M10 grade with minimum cement content of 220 kg /cum
52.48
4712
247287.33
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
15.85
6257
99176.14
... More
Ground Floor
7.46
7958
59371.45
... More
As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete)
-
-
-
... More
Ground Floor
62.75
7958
499404.66
... More
As in item 6 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)
-
-
-
... More
Ground Floor
14.91
7958
118663.32
... More
As in item 6 above but in R.C.C. Raft foundation and footing with approved stone ballast. (Using 1:1.5:3 Mix concrete)
1.55
6257
9698.61
... More
As in item 6 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20.
-
-
-
... More
Ground Floor
3.48
7507
26125.23
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class 150 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
38.3
5098
195271.02
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
41.31
284
11739.89
... More
Painting on DPC or over roof slab one coat of air blown bitumen 60/70 or 80/100 grade @ one Kg/Sqm including cost of fuel wood other materials, labour T & P etc required for proper completion of work.
41.31
101
4176.44
... More
Same as in item no. 11 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms.
-
-
-
... More
Ground Floor
150.66
6298
948977.21
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
-
-
-
... More
Ground Floor
48.71
777
37865.21
... More
Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :
-
-
-
... More
400 mm dia piles
490
2626
1287073.2
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
-
-
-
... More
Ground Floor
132.75
7460
990348.19
... More
Supply & fixing of flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (a) 35mm thick
-
-
-
... More
(a) Single leaf
5.78
1655
9566.19
... More
(b) Extra for double leaf doors
30.24
1728
52280.73
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). [ BOTH SIDE ]
36.02
661
23819.67
... More
M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.
-
-
-
... More
Providing & fixing of hold fasts.
146.4
135
19766.93
... More
Providing & fixing of door / windows grill.
1479.47
119
176648.72
... More
Fabrication of Z-section steel windows. (openable)
1415.25
90
128292.41
... More
Angle iron chaukhats
305.25
90
27554.92
... More
Fixing of steel or wooden chaukhats
-
-
-
... More
in position.
-
-
-
... More
(a) Door chaukhats
19
1233
23427.57
... More
(b) Window chaukhats
21
778
16344.3
... More
(c) Ventilator chaukhats
1
588
588.66
... More
15 mm plinth plaster (1 cement :4 coarse sand)
75.35
284
21461.19
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand
-
-
-
... More
Ground Floor
864.15
273
236327.74
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 coarse sand
-
-
-
... More
Ground Floor
695.53
237
165334.44
... More
Making grooves 10 to 12 X 12mm and upto 25 X 15 mm deep in plaster of the walls or in ceiling vertically or horizontally as required.
338.28
69
23540.91
... More
Supply & fixing 6 mm thick China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T & P etc required for proper completion of the work. (Floor Tile)
-
-
-
... More
Ground Floor
1.5
769
1154.52
... More
Supply & fixing 6 mm thick China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T & P etc required for proper completion of the work. (Wall Tile)
-
-
-
... More
Ground Floor
8.59
769
6611.55
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor).
71.74
424
30479.46
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor).
95.03
424
40374.45
... More
Supply and fixing 6 to 8 mm thick ivory or light shades vitrified tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand mortar finished with in its cement colour slurry,jointing and polished of approved quality complete, including supply of all materials,labour,tools and plants etc. required for proper completion of the work as per direction of Engineer-in-charge
428.24
424
181942.05
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse
sand), finished with a floating coat of neat cement.18 mm thick
43.71
457
20017.43
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thick
1364.3
63
86592.12
... More
Kota stone slab flooring over 20 mm (average)
thick base laid over and jointed with grey
cement slurry mixed with pigment to match the
shade of the slab, including rubbing and
polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
25 mm thick
11.99
1347
16158.32
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primerapplied @ 2.20 kg/ 10 sqm)
695.53
118
82315.98
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
695.53
107
75075.51
... More
Distempering (Two coat) with oil bounddistemper of approved brand andmanufacture & of required shade on undecorated wall surface to give an evenshade over & including a priming coat with cement primer of approved brand &manufacture such as Berger,J&N, ShalimarAsian paints after thoroughly brushingthe surface free from mortar droppings &other foreign matters & also includingpreparing the surface even with plasterof paris or approvedsynthetic material &sand papered smooth including cost ofallmaterials.
1316.45
128
169058.51
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1316.45
107
142097.61
... More
Painting Ist coat over priming coat (butexcluding cost of priming coat) on steeland other metal surfaces up to 10 cm.width or girth or small articles notexceeding 0.10sqm in area white superiorsynthetic enamel such as LUXOL3,Hi-glossapcolite superlac, DULUX specifiedbrushing to give an even shade andincluding cleaning the surface of alldirt,dust and other foreign matter sandpapering and stoping including cost ofall materials, labour tools and plantsetc. required for proper completion ofthe work.
110.1
128
14139.04
... More
"Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound
consisting of applying:(a) after surface preparation, first layer of slurry of cement @
0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is
still green. Overlaps of joints of fibre cloth should not be less than 10 cm." "(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately." "For the purpose of measurement the entire treated surface will be measured."
413.58
476
197083.28
... More
Construction of drain alongwith apron.
119.57
833
99608.98
... More
Providing & fixing stainless steel sliding door bolts ISI marked complete. (a) 300mm x 16mm.
19
475
9025
... More
Providing & fixing stainless steel tower bolts ISI marked complete.
-
-
-
... More
(a) 250 mm x 10mm
19
380
7220
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
38
82
3133.1
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
70.76
736
52110.49
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigment
8.64
730
6313.25
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
16.38
7913
129615.76
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete.
11.6
271
3146.62
... More
Columns,Pillars, Piers, Abutments, Posts and Struts.
15.77
664
10486.26
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
335.44
509
170869.78
... More
Suspended floors, roofs, landings, balconies and access platform.
513.06
641
329076.68
... More
SCHOOL BUILDING PLUMBING WORKS
-
-
-
... More
SUB HEAD - I - SANITARY INSTALLATIONS
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:-W.C. pan with ISI marked white solid plastic seat and lid
1
5538
5538.36
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
1
1832
1832.28
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe
40 mm dia
4
80
322.88
... More
Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings :
-
-
-
... More
Size 600x450x200 mm
2
2820
5641.22
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
1
116
116.45
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
... More
30 cm length
-
-
-
... More
15 mm nominal bore
4
58
235.2
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
... More
15 mm nominal bore
1
350
350.57
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
... More
15 mm nominal bore
5
567
2838.5
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
... More
15 mm nominal bore
2
552
1105.3
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
2
463
927.24
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15 mm nominal bore
3
397
1191.78
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
1
77
77.09
... More
Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects. (Angle valve to be provide under item no. 18 and measure with that item.)
1
1220
1220.75
... More
Providing and fixing twin coat hook complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
1
603
603.25
... More
SUB HEAD - II - ROOFING DRAINAGE WORK
-
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
8
206
1650.48
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.
-
-
-
... More
Single socketed pipes.
-
-
-
... More
75 mm diameter
5
172
860.5
... More
110 mm diameter
35
261
9137.1
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
75 mm
1
63
63.43
... More
110 mm
3
94
282.54
... More
Single pushfit Coupler
-
-
-
... More
110 mm
3
88
264.81
... More
Bend 87.5 degree
-
-
-
... More
75 mm bend
1
73
73.26
... More
110 mm Bend
8
104
832
... More
Shoe (Plain)
-
-
-
... More
110 mm Shoe
8
91
729.6
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
110 mm
12
256
3081.96
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
8
37
302.72
... More
SUB HEAD - III - SOIL & WASTE DRAIN WORK
-
-
-
... More
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes.
-
-
-
... More
110 mm dia.
15
679
10188.75
... More
Providing and fixing floor trap/floor drain of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
... More
110mm x 110mmX110mm
3
1159
3477
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
Coupler for 110mm pipe
4
209
836
... More
Single tee with door
-
-
-
... More
110x110x110 mm
2
403
807.5
... More
Single 'Y'
-
-
-
... More
110x110x110 mm
1
394
394.25
... More
Bend 87.5° without door
-
-
-
... More
110 mm bend
5
247
1235
... More
Shoe (Plain) OR Bend 45°
-
-
-
... More
110 mm bend
2
209
418
... More
Vent Cowl
-
-
-
... More
110mm
2
85
171
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc.
-
-
-
... More
For Wash basin & Urinal
-
-
-
... More
40mm dia. Pipe
5
242
1211.25
... More
Elbow (90°)
-
-
-
... More
40mm
2
52
104.5
... More
Elbow (45°)
-
-
-
... More
40mm
2
42
85.5
... More
TEE
-
-
-
... More
50mm
1
95
95
... More
40mm
2
66
133
... More
Coupler
-
-
-
... More
50mm
1
57
57
... More
40mm
2
38
76
... More
SUB HEAD - IV - INTERNAL WATER SUPPLY
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm dia nominal bore
5
344
1721.7
... More
20 mm dia nominal bore
10
371
3718.7
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc
-
-
-
... More
Internal work - Exposed on wall / Terrace
-
-
-
... More
20 mm dia nominal bore
10
302
3024.9
... More
25 mm dia nominal bore
5
381
1908.15
... More
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
-
-
-
... More
15 mm dia nominal bore
1
401
401.51
... More
20 mm dia nominal bore
3
439
1318.17
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
... More
20mm dia nominal bore
5
430
2152.65
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
... More
20 mm dia nominal bore
10
16
160.8
... More
25 mm dia nominal bore
5
20
104.65
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
20 mm nominal bore
1
319
319.92
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
500
7
3805
... More
SUB HEAD -VI - (EXTERNAL SEWERAGE & WATER SUPPLY PERIPHERY WORK)
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
12
243
2923.08
... More
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):
-
-
-
... More
Depth not exceeding 1.5 m
36
49
1794.24
... More
Providing, laying and jointing glazed stoneware pipes class SP-1with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
100 mm diameter
5
306
1534.25
... More
150 mm diameter
10
481
4813
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
-
-
-
... More
100 mm diameter S.W. pipe
3
317
951.48
... More
150 mm diameter S.W. pipe
7
514
3598.14
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
... More
150x100 mm size P type
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
1891
3782.64
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
8833
35334.8
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
8
383
3064.08
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (External Water Supply)All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.
1
149
149.14
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
-
-
-
... More
External work
-
-
-
... More
20 mm dia nominal bore
6
254
1529.82
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
... More
20 mm diameter pipe
6
9
59.94
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :
-
-
-
... More
20 mm diameter pipe
6
108
649.74
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
... More
20mm dia nominal bore
1
430
430.53
... More
INTERNAL ELECTRICAL WORK
-
-
-
... More
SUBHEAD I- WIRING POINTS
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group C
99
1043
103328.28
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
1
1128
1128.22
... More
Wiring for light/ Power plug with 2X4 sq. mm FRLS PVC insuleted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
100
241
24124
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
... More
2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire
145
198
28802.8
... More
2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire
80
317
25367.2
... More
2 x 10 sq.mm. + 1 x 6 sq.mm. earth wire
25
411
10292.75
... More
4 x 6 sq.mm. + 2 x 6 sq.mm. earth wire
25
544
13615.25
... More
4 x 10 sq.mm. + 2 x 6 sq.mm. earth wire
35
725
25406.85
... More
4 x 16 sq.mm. + 2 x 6 sq.mm. earth wire
35
985
34507.55
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
23
266
6129.96
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
6
28
173.34
... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required.
-
-
-
... More
5/6 amps switch
46
74
3422.4
... More
2 Way 5/6 amps switch
1
106
106.9
... More
15/16 amp switch
29
112
3267.72
... More
3 pin 5/6 amp socket outlet
46
88
4053.52
... More
6 pin 15/16 amp socket outlet
29
142
4126.41
... More
Telephone socket outlet
1
106
106.9
... More
TV antenna socket outlet
1
106
106.9
... More
Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required.
2
71
143.02
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
4
525
2100.4
... More
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.
-
-
-
... More
2 Pair
2
27
54.9
... More
10 Pair
5
175
878.75
... More
Installation, testing and commissioning of ceiling fan,including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
23
244
5631.55
... More
Installation of exhaust fan in the existing opening , including making good the damage, connection, testing commissioning etc. as required.
-
-
-
... More
(a): Up to 450mm sweep
3
325
975.09
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
3
149
448.53
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25 mm
11
104
1152.03
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
15
33
509.1
... More
SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS
-
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
-
-
-
... More
1200 mm sweep ceiling fan
23
1971
45352.78
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
75
82
6174
... More
Supply, Installation, Testing and Commissioning of Surface mounted 15W LED Downlighter made of polycarobate housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 1500, Life of LED : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K (SDCM5), CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.Minimum Internal Surge Protection 2.0KV & Luminaire manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips SM251C LED16S- 6500 PSU WH equivalent.
20
1140
22800
... More
Supply, Installation, Testing and Commissioning of Surface mounted 10W LED Downlighter made of extruded Aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 1000, Life of LED : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K (SDCM5), CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.Minimum Internal Surge Protection 2.0KV &Luminaire manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips BN021C LED10S PSU CW GR S2
13
912
11856
... More
Supply, Installation, Testing and Commissioning of surface LED batten 20W made of extrusion aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =95lumens/watt with Minimum system Lumens 2000, Life of fixture (Including Driver) : 30000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM=5) , CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.luminair manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips BN021C LED20S PSU CW GR S2
38
912
34656
... More
Supply, Installation, Testing and Commissioning of 6.5W LED bulkhead made of die cast aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 700, Life of fixture (Including Driver) : 30000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K (SDCM5), CRI 80, PF 0.95, Min working temp range -0°C Ta 45°C, an operating Voltage Range of 140 - 270 VAC.Minimum Internal Surge Protection 2.5KV & , The fixture design should comply with EMC / EMI compliance along with BIS certification for LED Driver & Luminaire ,. luminair manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips WT140W LED7S CW PSU S1 PC
4
807
3230
... More
SUBHEAD III-DISTIBUTION BOARD
-
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
4 way Double door (4 + 12)
2
2954
5909.8
... More
6 way Double door (4 + 18)
1
3592
3592.69
... More
8 way Double door (4 + 24)
1
4309
4309.92
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 4 way, Double door TPN MCBDB
2
780
1560.14
... More
For 6 way, Double door TPN MCBDB
1
811
811.86
... More
For 8 way, Double door TPN MCBDB
1
967
967.87
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
30
184
5547.3
... More
Supplying and fixing 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
63A 4P Schneider (ACT 9 'C' CURVE 10kA)
2
3382
6764
... More
40A 4P Schneider (ACT 9 'C' CURVE 10kA)
2
3382
6764
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
12
9
112.68
... More
SUBHEAD IV-EARTHING
-
-
-
... More
Suplly and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I. all respects.
1
6251
6251
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
1
839
839.31
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
20
176
3524.8
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
55
50
2780.8
... More
SUBHEAD V-CABLES
-
-
-
... More
Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required. Make: Polycab/KEI/RR/Fenolax/Equ
-
-
-
... More
3.5C x 70 sqmm aluminium conductor, A2XWY.
25
597
14938.75
... More
4C x 16 sqmm aluminium conductor, 2XWY.
15
221
3320.25
... More
4C x 10 sqmm aluminium conductor, 2XWY.
5
188
940.5
... More
2C x 16 sqmm aluminium conductor, 2XWY.
5
165
826.5
... More
Supplying following 1.1kV grade, XLPE insulated, FRLS type control cables,suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation and with all components as mentioned in BOQ, specifications and schedule, complete as required.
-
-
-
... More
2C X 2.5 sqmm copper conductor
5
76
380
... More
4C X 2.5 sqmm copper conductor
5
114
570
... More
6C X 2.5 sqmm copper conductor
5
148
741
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
25
32
812.5
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 1mm thick saddle)
25
66
1661.25
... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
... More
3½ X 70 sq. mm (38mm)
2
338
676.06
... More
4 X 16 sq. mm (28mm)
2
223
446.38
... More
4 X 10 sq. mm (25mm)
2
194
388.58
... More
2 X 16 sq. mm (22mm)
2
184
369.82
... More
SUBHEAD VI -MISCELLANEOUS
-
-
-
... More
Supply, Installation, Testing and Commissioning of 250mm size PVC exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x1.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. Make:Crompton Brisk Air Neo 250 mm (10 inch)-BRISKAIRNEO10WHT
3
2413
7239
... More
Supply, Installation, Testing and Commissioning of 300mm size metal exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x1.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. Make:Havells Ventil Air DB 300mm Exhaust Fan| Cut Out Size: Ø12.8
1
3382
3382
... More
S/f of 10 pair Telephone Tag Block for Floors and building with Krone connectors , with connection and punching of same Make-Kone
1
1225
1225.5
... More
SUBHEAD VII-MAIN L. T. PANELS
-
-
-
... More
LT PANEL
-
-
-
... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only. The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm
Phase to neutral-minimum 15mm
CUBICAL PANEL BOARD ( MCCB TYPE )
SUB PANEL
Incoming : one (1) No.200Amp. MCCB-1No.
Metering :
One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.
One (1) No. (0-200A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.
One (1) Set of Phase Indication Lamp.
Bus Bar :
One (1) No.200 A, TPN aluminimum bus bar of suitable length.
Outgoing :
Phase indication lamps on each outgoing to be provided.
100 Amp. MCCB- 1 No. 63 Amp. MCCB- 3 No. OR outgoing as per site requirment(AS/SLD) Panel described as above
1
131166
131166.5
... More
SUBHEAD VIII-CABLE TRAY & RACEWAY
-
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
5
483
2416.1
... More
300 mm width X 50 mm depth X 1.6 mm thickness
10
695
6955.7
... More
DETAILED ESTIMATE OF PROPOSED TOILET BLOCK
-
-
-
... More
Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.
13.74
180
2473.89
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
0.6
484
290.74
... More
Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.
2.13
1469
3129.08
... More
Providing and laying in position ready mixed or site batched design mix cementconcrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.Concrete of M10 grade with minimum cement content of 220 kg /cum
6.8
4712
32041.8
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete
(plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
21.53
214
4617.54
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
3.02
6257
18896.65
... More
Ground Floor
0.94
7958
7481.12
... More
As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete)
-
-
-
... More
Ground Floor
3.34
7958
26581.86
... More
First class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
8.95
5098
45631.22
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
6.23
284
1770.5
... More
Painting on DPC or over roof slab one coat of air blown bitumen 60/70 or 80/100 grade @ one Kg/Sqm including cost of fuel wood other materials, labour T & P etc required for proper completion of work.
6.23
101
629.85
... More
Same as in item no. 8 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. Ground Floor
11.21
6298
70609.55
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
-
-
-
... More
Ground Floor
33.82
777
26290.32
... More
Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :
-
-
-
... More
400 mm dia piles
38.5
2626
101127.18
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
-
-
-
... More
Ground Floor
7.61
7460
56772.5
... More
Supply & fixing of flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (a) 35mm thick
-
-
-
... More
(a) Single leaf
8.19
1655
13554.86
... More
(b) Extra for double leaf doors
3.78
1728
6535.09
... More
M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.
-
-
-
... More
Providing & fixing of hold fasts.
37.2
135
5022.74
... More
Providing & fixing of door / windows grill.
214.34
119
25592.2
... More
Fabrication of Z-section steel windows. (openable)
72.77
90
6596.6
... More
Angle iron chaukhats
105.3
90
9545.45
... More
Fixing of steel or wooden chaukhats
-
-
-
... More
in position.
-
-
-
... More
(a) Door chaukhats
7
1233
8631.21
... More
(b) Ventilator chaukhats
5
588
2943.3
... More
15 mm plinth plaster (1 cement :4 coarse sand)
9.19
284
2617.5
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand
-
-
-
... More
Ground Floor
16.48
273
4506.95
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 coarse sand
-
-
-
... More
Ground Floor
88.8
273
24285.02
... More
Making grooves 10 to 12 X 12mm and upto 25 X 15 mm deep in plaster of the walls or in ceiling vertically or horizontally as required.
40.46
69
2815.61
... More
Supply & fixing 6 mm thick China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T & P etc required for proper completion of the work. (Floor Tile)
-
-
-
... More
Ground Floor
15.65
769
12045.49
... More
Supply & fixing 6 mm thick China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T & P etc required for proper completion of the work. (Wall Tile)
-
-
-
... More
Ground Floor
71.31
769
54885.88
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).
19.57
424
8314.51
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the archite ctural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
7.97
2204
17566.84
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primerapplied @ 2.20 kg/ 10 sqm)
88.8
118
10509.48
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
88.8
107
9585.07
... More
Distempering (Two coat) with oil bounddistemper of approved brand andmanufacture & of required shade on undecorated wall surface to give an evenshade over & including a priming coat with cement primer of approved brand &manufacture such as Berger,J&N, ShalimarAsian paints after thoroughly brushingthe surface free from mortar droppings &other foreign matters & also includingpreparing the surface even with plasterof paris or approvedsynthetic material &sand papered smooth including cost ofallmaterials.
39.08
128
5018.65
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
39.08
107
4218.3
... More
Painting Ist coat over priming coat (butexcluding cost of priming coat) on steeland other metal surfaces up to 10 cm.width or girth or small articles notexceeding 0.10sqm in area white superiorsynthetic enamel such as LUXOL3,Hi-glossapcolite superlac, DULUX specifiedbrushing to give an even shade andincluding cleaning the surface of alldirt,dust and other foreign matter sandpapering and stoping including cost ofall materials, labour tools and plantsetc. required for proper completion ofthe work.
11.1
128
1425.46
... More
Same as item 27 above but on new wood
-
-
-
... More
surface.
23.94
128
3074.37
... More
"Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound
consisting of applying:(a) after surface preparation, first layer of slurry of cement @
0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is
still green. Overlaps of joints of fibre cloth should not be less than 10 cm."
"(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on
parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which
will be paid for separately."
"For the purpose of measurement the entire treated surface will be
measured."
21.02
476
10016.66
... More
Construction of drain alongwith apron.
32.62
833
27174.42
... More
Providing & fixing stainless steel sliding door bolts ISI marked complete. (a) 300mm x 16mm.
7
475
3325
... More
Providing & fixing stainless steel tower bolts ISI marked complete.
-
-
-
... More
(a) 250 mm x 10mm
7
380
2660
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
14
82
1154.3
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
2.9
736
2135.68
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigment
6.72
7913
53175.7
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
30.17
509
15368.3
... More
Suspended floors, roofs, landings, balconies and access platform.
28.48
641
18267.07
... More
TOILET BLOCK PLUMBING WORKS
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:- White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests.
4
4681
18724.68
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
3
1592
4776.54
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
2
1140
2281.24
... More
"Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
"
"Semi rigid pipe
"
40 mm dia
6
80
484.32
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
2
116
232.9
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.White Agaria Marble Stone
1
2421
2421.35
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
... More
30 cm length
-
-
-
... More
15 mm nominal bore
10
58
588
... More
20 mm nominal bore
2
82
164.7
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
5
567
2838.5
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore
8
463
3710.16
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15 mm nominal bore
11
397
4369.86
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
2
77
154.18
... More
HANDICAPPED TOILET :-
-
-
-
... More
Providing and fixing of WB 46 x 36 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no. hinged rail 76 cm & 4 nos. of grab rails 60 cm.
1
43244
43244
... More
SUB HEAD - II - ROOFING DRAINAGE WORK
-
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
1
206
206.31
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. Single socketed pipes. 75 mm diameter
8
172
1376.8
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
75 mm
1
63
63.43
... More
Single pushfit Coupler
-
-
-
... More
75 mm
1
64
64.31
... More
Bend 87.5 degree
-
-
-
... More
75 mm bend
1
73
73.26
... More
Shoe (Plain)
-
-
-
... More
75 mm Shoe
1
64
64.4
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm
2
255
511.68
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
1
37
37.84
... More
SUB HEAD - III - SOIL & WASTE DRAIN WORK
-
-
-
... More
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes.110 mm dia.
55
679
37358.75
... More
Providing and fixing floor trap/floor drain of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :110mm x 110mmX110mm
4
1159
4636
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
Coupler for 110mm pipe
4
209
836
... More
Single tee with door
-
-
-
... More
110x110x110 mm
4
403
1615
... More
Single 'Y'
-
-
-
... More
110x110x110 mm
2
394
788.5
... More
Bend 87.5° without door
-
-
-
... More
110 mm bend
4
247
988
... More
Shoe (Plain) OR Bend 45°
-
-
-
... More
110 mm bend
4
209
836
... More
Vent Cowl
-
-
-
... More
110mm
4
85
342
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc.
-
-
-
... More
For Wash basin & Urinal
-
-
-
... More
50mm dia. Pipe
5
327
1638.75
... More
40mm dia. Pipe
5
242
1211.25
... More
Elbow (90°)
-
-
-
... More
50mm
2
80
161.5
... More
40mm
2
52
104.5
... More
Elbow (45°)
-
-
-
... More
50mm
2
66
133
... More
40mm
2
42
85.5
... More
TEE
-
-
-
... More
50mm
2
95
190
... More
40mm
2
70
140
... More
Coupler
-
-
-
... More
50mm
2
57
114
... More
40mm
2
38
76
... More
SUB HEAD - IV - INTERNAL WATER SUPPLY
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm dia nominal bore
35
344
12051.9
... More
20 mm dia nominal bore
20
371
7437.4
... More
25 mm dia nominal bore
10
433
4338.8
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc
-
-
-
... More
Internal work - Exposed on wall / Terrace
-
-
-
... More
20 mm dia nominal bore
15
302
4537.35
... More
25 mm dia nominal bore
30
381
11448.9
... More
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
-
-
-
... More
15 mm dia nominal bore
2
401
803.02
... More
20 mm dia nominal bore
3
439
1318.17
... More
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
... More
20mm dia nominal bore
2
430
861.06
... More
25mm dia nominal bore
7
373
2614.43
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
... More
20 mm dia nominal bore
15
16
241.2
... More
25 mm dia nominal bore
30
20
627.9
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
25 mm nominal bore
1
321
321
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
7
15220
... More
SUB HEAD -V - (EXTERNAL PLUMBING WORK)
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
30
243
7307.7
... More
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):Depth not exceeding 1.5 m
90
49
4485.6
... More
Providing, laying and jointing glazed stoneware pipes class SP-1with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
100 mm diameter
5
306
1534.25
... More
150 mm diameter
25
481
12032.5
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
-
-
-
... More
100 mm diameter S.W. pipe
5
317
1585.8
... More
150 mm diameter S.W. pipe
25
514
12850.5
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
1891
3782.64
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
8833
26501.1
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
6
383
2298.06
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (External Water Supply)All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.
1
149
149.14
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work 25 mm dia nominal bore
35
323
11324.25
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 25 mm diameter pipe
35
12
444.15
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :25 mm diameter pipe
35
111
3890.6
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore
1
373
373.49
... More
ELECTRICAL
-
-
-
... More
SUBHEAD I- WIRING POINTS
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.Group C
20
1043
20874.4
... More
Wiring for light/ Power plug with 2X4 sq. mm FRLS PVC insuleted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
35
241
8443.4
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
... More
2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire
5
198
993.2
... More
2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire
5
317
1585.45
... More
2 x 10 sq.mm. + 1 x 6 sq.mm. earth wire
5
411
2058.55
... More
4 x 6 sq.mm. + 2 x 6 sq.mm. earth wire
5
544
2723.05
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
1
28
28.89
... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required.
-
-
-
... More
5/6 amps switch
1
74
74.4
... More
15/16 amp switch
2
112
225.36
... More
3 pin 5/6 amp socket outlet
1
88
88.12
... More
6 pin 15/16 amp socket outlet
2
142
284.58
... More
Installation of exhaust fan in the existing opening , including making good the damage, connection, testing commissioning etc. as required.
-
-
-
... More
(a): Up to 450mm sweep
5
325
1625.15
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
5
149
747.55
... More
SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS
-
-
-
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
14
82
1152.48
... More
Supply, Installation, Testing and Commissioning of Surface mounted 10W LED Downlighter made of extruded Aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 1000, Life of LED : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K (SDCM5), CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.Minimum Internal Surge Protection 2.0KV &Luminaire manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips BN021C LED10S PSU CW GR S2
10
912
9120
... More
Supply, Installation, Testing and Commissioning of surface LED batten 20W made of extrusion aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =95lumens/watt with Minimum system Lumens 2000, Life of fixture (Including Driver) : 30000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM=5) , CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.luminair manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips BN021C LED20S PSU CW GR S2
2
912
1824
... More
Supply, Installation, Testing and Commissioning of 6.5W LED bulkhead made of die cast aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 700, Life of fixture (Including Driver) : 30000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K (SDCM5), CRI 80, PF 0.95, Min working temp range -0°C Ta 45°C, an operating Voltage Range of 140 - 270 VAC.Minimum Internal Surge Protection 2.5KV & , The fixture design should comply with EMC / EMI compliance along with BIS certification for LED Driver & Luminaire ,. luminair manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips WT140W LED7S CW PSU S1 PC
2
807
1615
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
4 way Double door (4 + 12)
1
2954
2954.9
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 4 way, Double door TPN MCBDB
1
780
780.07
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
7
184
1294.37
... More
Supplying and fixing 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40A 4P Schneider (ACT 9 'C' CURVE 10kA)
1
3382
3382
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
5
9
46.95
... More
SUBHEAD IV-EARTHING
-
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
20
50
1011.2
... More
SUBHEAD V-CABLES
-
-
-
... More
Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required. Make: Polycab/KEI/RR/Fenolax/Equ
-
-
-
... More
4C x 10 sqmm aluminium conductor, 2XWY.
45
188
8464.5
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
45
32
1462.5
... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
... More
4 X 10 sq. mm (25mm)
2
194
388.58
... More
SUBHEAD VI -MISCELLANEOUS
-
-
-
... More
Supply, Installation, Testing and Commissioning of 250mm size PVC exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x1.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. Make:Crompton Brisk Air Neo 250 mm (10 inch)-BRISKAIRNEO10WHT
5
2413
12065
... More
SEPTIC TANK & SOAK PIT
-
-
-
... More
Size :- Length = 5.00 M. Width = 2.00M Total Depth =3.00M
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-incharge.
-
-
-
... More
In all kind of soil upto 1.5m depth
28.22
122
3464.85
... More
In all kind of soil upto 1.5m to 3.0m. depth
25.93
210
5458.01
... More
In all kind of soil upto 3.0m to 4.5m. depth
6.92
298
2063.61
... More
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 40mm nominal size)
2.77
5449
15095.81
... More
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
14.27
5098
72755.02
... More
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
2.28
6257
14266.35
... More
Suspended floors, roofs, landings, balconies and access platform.
15.19
641
9742.87
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
1.79
7408
13260.84
... More
12mm cement plaster on rough side of mix 1:3 (1 cement : 3 coarse sand)
60.96
303
18522.09
... More
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
12
376
4521.36
... More
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
2
429
859.12
... More
Providing & fixing 75mm dia vent pipes.
1
722
722.68
... More
Providing & fixing of 75mm dia cast iron terminal guard.
1
235
235.67
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
... More
M.D. -10- Circular shape 500mm internal diameter
2
770
1541.12
... More
M.D. -2.5- Circular shape 450mm internal diameter
4
768
3074.52
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.
-
-
-
... More
With F.P.S. bricks
1
17651
17651.98
... More
EXTERNAL RAIN WATER HARVESTING WORKS
-
-
-
... More
RECHARGE PITS
-
-
-
... More
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m.
-
-
-
... More
In all kind of soil upto 1.5m depth
22.59
122
2773.6
... More
In all kind of soil upto 1.5m to 3.0m. depth
22.59
210
4754.97
... More
In all kind of soil upto 3.0m to 4.5m. depth
22.59
298
6736.56
... More
In all kind of soil upto 4.5 m to 6.0m. depth
10.54
385
4067.49
... More
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
1.2
5449
6539.7
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
24.14
5098
123076.82
... More
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
1.61
6257
10074.04
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
10.75
641
6895.05
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1.27
7460
9474.52
... More
12mm cement plaster on rough side of single or half brick wall mix
-
-
-
... More
1:3 (1 cement : 3 Coarse sand)
46.16
310
14353.91
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:
-
-
-
... More
With 20x20mm square bar
10
376
3767.8
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
... More
M.D. -10- Circular shape 500mm internal diameter
1
811
811.12
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.
-
-
-
... More
Drilling of 300mm dia bore hole manually.
15
571
8567.4
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
... More
150 mm nominal size dia
15
558
8377.95
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
12.13
1044
12668.09
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
13.11
1064
13949.7
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
13.11
1064
13949.7
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
1
1400
1400.4
... More
DESILTING CHAMBER
-
-
-
... More
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m.
-
-
-
... More
In all kind of soil upto 1.5m depth
10.05
122
1233.94
... More
In all kind of soil upto 1.5m to 3.0m. depth
4.06
210
854.59
... More
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand:4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
1.04
5449
5667.74
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
3.52
5098
17946.58
... More
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
1.38
6513
8988.86
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
9.93
641
6369.1
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1.09
7460
8131.67
... More
12mm cement plaster on rough side of single or half brick wall mix
-
-
-
... More
1:3 (1 cement : 3 Coarse sand)
17.6
310
5472.9
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:
-
-
-
... More
With 20x20mm square bar
12
376
4521.36
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
... More
M.D. -10- Circular shape 500mm internal diameter
2
811
1622.24
... More
SUB HEAD - (II)- STORM WATER PIPE & CHAMBER
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.
34
243
8282.06
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia. RCC Pipes
34
514
17476.68
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
34
384
13086.94
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
8833
44168.5
... More
BOQ FOR 7.00 RM LENGTH & 4.50 MT. WIDE INTERLOCKING
-
-
-
... More
Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m (5 fts.) and lead upto 30 mt. (100 fts.) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-Incharges upto a distance of 30mt. (100 fts) from the foundation trenches.
1.6
180
288.08
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
31.5
151
4769.73
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
4.24
2023
8578.33
... More
Class -150 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materails , labour tools and plants etc. required for proper completetion of the work.
1.39
5098
7086.86
... More
Providing and laying cement concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone ballast 40 mm. nominal size ) indcluding supply of all materials , labours and T & P etc. required for proper completion of the work and curing complete , Also including cost of form work in foundation.
2.58
4712
12157.04
... More
Supply & laying of Rubber Moulded Zig-Zag 80 mm thick I shaped mechanically compressed interlocking cement concrete paver block manufactured by high pressure & controlled vibration machine.
28.28
755
21351.68
... More
FIRE FIGHTING WORK
-
-
-
... More
Supply & fixing of fire extinguisher, ABC Type 6.00 kg. capacity(ISI Marked IS:15683 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
2
8645
17290
... More
Supply & fixing of CO2 type fire extinguisher, 6.5 kg. capacity(ISI Marked IS:2878 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
2
18905
37810
... More
BORING AND PUMP
-
-
-
... More
External W/S arrangement, T.W. boring of 150mm dia with 100mm dia P.V.C. pipe assembly, 1.5 H.P. submersible pump including supply of all accessories starter, panel etc. & pipe arrangement etc.
-
-
-
... More
5" PVC pipe of ISI mark [14 Kg pressure]
70
570
39900
... More
P/F 2" GI pipe (B) class.
50
332
16625
... More
NYLon mesh for filter
1
522
522.5
... More
Plastic dori
1
142
142.5
... More
Solvent dori
1
237
237.5
... More
4" End cap
1
237
237.5
... More
4" Submersible Cap
1
213
213.75
... More
2" MS clamp (Heavy)
1
475
475
... More
2" Gl elbow.
1
104
104.5
... More
2"*6" GI nipple
1
133
133
... More
1.5 HP 9 Stage Submersible Pump of ISI mark With
-
-
-
... More
automatic panel.
1
23750
23750
... More
2.5 Sqm. Submersible cable.
80
190
15200
... More
Drilling Charges for 6" dia tubewell.
70
451
31587.5
... More
Pea Gravel
2
2850
5700
... More
2" Ms Socket.
4
142
570
... More
Cartage of material upto site.
1
2850
2850
... More
GST Extra as per applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%