Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date31 Jan 2025
Closing Date5 Feb 2025
Tender Amount₹ 8,20,15,000
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is "A" & Above.
Bid Capacity
... View More
The bid capacity required to bid can be determined by the average annual financial turnover and the estimated cost of the project. The bidder should have an average annual financial turnover of at least 30% of the estimated cost of the project during the last 5 years ending 31 March of the previous financial year. This can be represented as: Average Annual Financial Turnover ≥ 0.3 * Estimated Cost Additionally, the bidder should not have incurred any loss in more than 2 years during the last 5 years ending 31 March of the previous financial year. For a specific tender with an estimated cost of Rs. 820.15 + GST, the bid capacity required can be calculated as:
- Average annual financial turnover: 30% of Rs. 820.15 + GST
- Solvency: 40% of Rs. 820.15 + GST Formulas:
- Average annual financial turnover = 0.3 * (Estimated Cost)
- Solvency = 0.4 * (Estimated Cost) However, another formula is also provided: Bidding Capacity = {[A x N x 2.5] - B} Where, A = Maximum turnover in construction works executed in any one year during the last seven years taking into account the completed as well as works in progress. N = Number of years prescribed for completion of work for which bids have been invited. B = Value of existing commitments and ongoing works to be completed during the period of completion of work for which bids have been invited.
Technical Capacity
... View More
The required prior work experience for the bidder includes having completed similar works in the last 7 years, with specific requirements as follows:
- Three similar completed works costing not less than 40% of the estimated cost.
- Two similar completed works costing not less than 50% of the estimated cost.
- One similar completed work costing not less than 80% of the estimated cost.
The bidder should have experience in construction of various buildings, and the value of executed works shall be brought to the current costing level by enhancing the actual value of the work by the escalation/enhancement factor. The bidder should have average annual financial turnover of at least 30% of the estimated cost during the last 5 years, and should not have incurred any loss in more than 2 years during the last 5 years.
Costs
EMD
₹ 16,40,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Summary
Construction Of Various Building To Development It As Center For Excellence At D.i.e.t Campus Sarnath District-varanasi.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPPRC_1000451_1Tender No
57/UPPCL/GM-1/E-TENDER/2024-25 Dated-24.01.2025Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
1040
489
508695.2
... More
Providing and laying in position ready mixed or site batched design mix cementconcrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to eithe.r re-design the mix or bear the cost of extra cement. Concrete of M10 grade with minimum cement content of 220 kg /cum
350
4756
1664768
... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.
180
1482
266923.8
... More
Construction of drain along with apron. 150X150MM
320
772
247225.6
... More
Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete. (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
1320
216
285780
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland
Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following
grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement contentin design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement
content of 330 kg /cum R.C.C. work upto Plinth Lvl.
-
-
-
... More
Grade Beam
88
6636
584028.72
... More
R.C.C. Work in foundation/ Footing
265
6636
1758722.85
... More
R.C.C. Work in Column upto plinth lvl
22
6636
146007.18
... More
Providing and laying in position ready mixed or sitebatched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.. All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum
-
-
-
... More
Lintle/ Lintle Band
36
6885
247860.72
... More
R.C.C. Work in slab
447
6885
3077603.94
... More
R.C.C. Work in Beam
193
6885
1328808.86
... More
R.C.C. Work in Column
115
6885
791777.3
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
144
5146
741104.64
... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
125
286
35858.75
... More
Painting on DPC or over roof slab one coat of air blown bitumen 60/70 or 80/100 grade @ one Kg/Sqm including cost of fuel wood other materials, labour T & P etc required for proper completion of work.
125
102
12756.25
... More
Brick work in super-structure above plinth level including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.5 brick thick. (1:4 cement & coarse sand).
-
-
-
... More
Ground Floor
343
6524
2237972.1
... More
First Floor
329
6524
2146626.3
... More
Second Floor
208
6524
1357137.6
... More
Mumty
80
6524
521976
... More
Half brick masonry with (Class M-150 First Class Brick) in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
-
-
-
... More
Ground Floor
185
748
138507.65
... More
First Floor
175
784
137320.75
... More
Second Floor
105
784
82392.45
... More
Mumty
45
784
35311.05
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)
19950
126
2524872
... More
Providing & fixing of M.S. GRILL
190
166
31621.7
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes
300
970
291201
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
300
913
274068
... More
Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 300 mm dia piles (Single bulb pile)
3600
2140
7706016
... More
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Single pile upto 50 tonne Safe capacity
-
-
-
... More
Initial test (Test Load 2.5 times the Safe capacity)
6
38244
229465.2
... More
Routine test (Test Load 1.5 times the Safe capacity)
6
13708
82249.92
... More
TMT Fe-500 iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
1650
7530
12425539.5
... More
15 mm plinth plaster (1 cement :4 coarse sand) F.M.-2.25
175
287
50314.25
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand. F.M.-2.25
-
-
-
... More
Ground Floor
1550
239
371922.5
... More
First Floor
1400
239
335930
... More
Second Floor
1138
239
273063.1
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand.
-
-
-
... More
Ground Floor
2200
276
607310
... More
First Floor
2150
276
593507.5
... More
Second Floor
1350
276
372667.5
... More
6 mm cement plaster of mix :. 1:3 (1 cement : 3 fine sand)
1250
209
262237.5
... More
Making grooves 10 to12mm wide x 8mm deep in plaster of the wal or in ceilng verticalLy or horizonta ly as required
2150
70
151016
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor).
280
428
120083.6
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick
820
1360
1115495.2
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm.
2690
1084
2917843
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 15mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm.
367
1133
415917.43
... More
Supply and fixing 6mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc.
1190
776
924558.6
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
4100
119
489827
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface)
8930
129
1157595.9
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
12950
108
1411161.5
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
1233
157
194789.34
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
68
1900
129200
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage
-
-
-
... More
For vertical surface two coats @ 0.70 kg per sqm per coat
160
330
52832
... More
For horizontal surface one coat @1.10 kg per sqm.
185
253
46866.05
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs as directed and specified by the Engineerin- Charge :With average thickness of 120 mm and minimum thickness at khurra as 65 mm. ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete for proper completion of work.
1192.65
1176
1402878.42
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
20
978
19579
... More
Fixing of Door, windows/ventilators chaukhats in position.
74
1244
92104.84
... More
Providing and fixing 150 mm bright finished floor stainless steel door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
74
189
14025.96
... More
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
150
475
71250
... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. Complete (a) 250 mm x 10mm
300
285
85500
... More
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm
300
190
57000
... More
Supply & fixing of flush doors commercial quality conforming to I.S. 2202 Part 1 (1983) including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (a) 35mm thick
-
-
-
... More
(a) Single leaf
175
1670
292367.25
... More
(b) Extra for double leaf doors
140
1745
244323.8
... More
both side laminated
316
667
210939.48
... More
Extra for providing lipping with 2nd class eak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
316
322
102017.44
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
785
539
423366.2
... More
Brick work with common burnt clay selected F.P.S. (non modular)bricks of class designation 7.5 in exposed brick work including makinghorizontal and vertical grooves 10 mm wide 12 mm deep complete incement mortar 1:6 (1 cement : 6 coarse sand)
18
6591
118643.58
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete.
420
273
115004.4
... More
Columns,Pillars, Piers, Abutments, Posts and Struts.
1340
671
899448.2
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
2718
514
1397568.42
... More
Suspended floors, roofs, landings, balconies and access platform.
3617
647
2341826.65
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters , with ISI marked M.S. pressed butt hinges bright finished of required size , Second class teak wood
11.34
3388
38421.28
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
74.72
1644
122852.38
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters , with ISI marked M.S. pressed butt hinges bright finished of required size , Second class teak wood
40.53
3388
137320.5
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm
16.39
3586
58781.42
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws with Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) both side laminated.
132.68
2636
349753.77
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : , 25 mm dia
57.75
366
21192.52
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
1072.19
53
57522.99
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all
lifts involved.
284.69
184
52468.37
... More
Demolishing mud phaska in terracing and disposal of material within 50 metres lead.
156.03
638
99611.11
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment
will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.
For the purpose of measurement the entire treated surface will be measured.
1020
481
490640.4
... More
INTERNAL W/S & SANITATION
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
14
4725
66154.76
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
27
4549
122835.96
... More
Providing & fixing toilet paper holder C.P. brass
27
561
15151.86
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
27
243
6582.6
... More
Providing and fixing Jaquar Make Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook of quality and make as approved by Engineer - in - charge.
27
1548
41809.5
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
37
1554
57518.35
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
6
2765
16592.7
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
61
722
44075.55
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
61
117
7170.55
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
61
161
9879.56
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
61
1122
68487.75
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern & jet) 15 mm nominal bore
160
401
64160
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal bore
133
68
9078.58
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
12
135
1625.04
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia
6
4846
29078.28
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
6
468
2808.84
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width
78 mm and effective height of 88 mm, weighing not less
than 190 gms.
12
495
5940.36
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
12
77
933.84
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 200 mm
4
4998
19995.12
... More
Kitchen sink without drain board 610x510 mm bowl depth 200 mm
1
3449
3449.92
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm
6
4598
27591.18
... More
Providing & fixing PVC waste pipe for sink including PVC waste fittings Complete Flexible Pipe 32mm Dia
11
83
918.28
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15mm nominal bore
41
353
14509.08
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore
30
557
16736.1
... More
Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge.
71
52
3708.33
... More
Providing and fixing of storage type (pressurised type) electric hot water heater copper sheet container, 25 mm thick insulation, stove enamelled M.S. jacket thermostatically controlled immersion heater with pilot neon lamp, suitable length of electrical cable and 15 amp 3 pin plug top, complete in all respect including testing etc. Capacity 25 Liters
6
12155
72931.5
... More
Providing and fixing of Kent Elite Plus Water Purifier (RO+UV+UF+TDS Control) with flow rate (50L/hr) including all its accessories, complete in all respect including testing etc.
1
39301
39301.5
... More
Providing and fixing of Water Cooler (Voltas Make) including all its accessories, complete in all respect including testing etc.
1
27806
27806.5
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (Including C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 50 mm dia)
18
5717
102913.38
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
7.43
2829
21020.96
... More
Providing and fixing of Kent Elite Plus Water Purifier (RO+UV+UF+TDS Control) with flow rate (50L/hr) including all its accessories, complete in all respect including testing etc.
3
39301
117904.5
... More
Providing and fixing of Water Cooler (Voltas Make) including all its accessories, complete in all respect including testing etc.
3
27806
83419.5
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
For Internal Toilet
-
-
-
... More
15 mm nominal outer dia Pipes
95
347
33021.05
... More
20 mm nominal outer dia Pipes
460
375
172674.8
... More
25 mm nominal outer dia Pipes
85
437
37228.3
... More
32 mm nominal outer dia Pipes
90
516
46459.8
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall
-
-
-
... More
20 mm nominal bore
325
233
76024
... More
25 mm nominal bore
195
280
54674.1
... More
32 mm nominal bore
165
362
59766.3
... More
Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on Wall Terrace loop & Tank Filling Pipe
-
-
-
... More
20 mm nominal bore
15
305
4580.25
... More
25 mm nominal bore
59
385
22728.57
... More
32 mm nominal bore
31
465
14437.94
... More
40 mm nominal bore
44
566
24944.04
... More
50 mm nominal bore
66
732
48312.66
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
... More
20mm diameter pipe
15
10
151.35
... More
25mm diameter pipe
59
12
756.38
... More
32mm diameter pipe
31
15
480.5
... More
40mm diameter pipe
11
17
193.93
... More
50mm diameter pipe
66
21
1405.8
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
20mm diameter pipe
5
242
1210.8
... More
25mm diameter pipe
20
306
6134.2
... More
32mm diameter pipe
11
341
3756.17
... More
40mm diameter pipe
15
440
6612.15
... More
50mm diameter pipe
22
575
12654.84
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
20 mm nominal bore
11
377
4147.22
... More
25mm nominal bore
4
434
1738.36
... More
32mm nominal bore
2
481
963.04
... More
40mm nominal bore
1
576
576.82
... More
50mm nominal bore
3
716
2150.58
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball. 40 mm nominal bore, 206 mm long, weighing not less than 690 gms
1
514
514.75
... More
Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on Wall Terrace loop & Tank Filling Pipe 50 mm nominal bore
132
732
96625.32
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 50mm diameter pipe
132
21
2811.6
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 50mm diameter pipe
44
575
25309.68
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :For vertical pipe connection with terrace ringmain
-
-
-
... More
20 mm nominal bore
1
377
377.02
... More
25mm nominal bore
9
434
3911.31
... More
32mm nominal bore
6
481
2889.12
... More
50mm nominal bore
4
716
2867.44
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
25 to 40 mm nominal bore
37
636
23559.38
... More
50 to 80 mm nominal bore
7
1246
8726.34
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball.25 mm nominal bore, 152 mm long, weighing not less than 440 gms
3
365
1097.22
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball.50 mm nominal bore, 242 mm long, weighing not less than 1240 gms
1
960
960.75
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1500
7
11535
... More
Providing, Fixing, Testing & Commissioning of XLPE Insulation of 9mm thickness on hot water supply pipes. Astral or equivalent approved complete in all respect as directed by Engineer-in-charge.
-
-
-
... More
15mm dia (9 mm thickness)
18
71
1282.5
... More
20mm dia (9 mm thickness)
50
71
3562.5
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks.
-
-
-
... More
25mm dia.
12
1225
14706
... More
40mm dia.
1
1368
1368
... More
50mm dia.
14
1515
21213.5
... More
100mm dia.
2
23983
47967.5
... More
150mm dia.
4
3439
13756
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm dia (for rain water)
212
263
55866.24
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Single Push Fit Coupler 110 mm dia
70
89
6237
... More
Single tee with door 110x110x110 mm
14
163
2289
... More
Plain bend 87.5 deg 110 mm dia
28
104
2939.44
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm dia
106
259
27481.56
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
14
208
2915.5
... More
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.
158
245
38850.62
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100mm dia SW pipe
152
673
102393.28
... More
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes.
-
-
-
... More
Internal Toilet (Soil & Waste Pipe)
-
-
-
... More
75 mm
231
479
110822.25
... More
110 mm
169.73
679
115289.1
... More
Exposed on Wall (Soil & Waste Pipe)
-
-
-
... More
110 mm
440
679
298870
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.
-
-
-
... More
Bend without door (45°)
-
-
-
... More
75mm
88
128
11286
... More
110mm
27
209
5643
... More
Bend without door (87.5°)
-
-
-
... More
75mm bend
88
142
12540
... More
110mm
54
247
13338
... More
Y' Fitting without door
-
-
-
... More
75mm
88
218
19228
... More
110mm
27
394
10644.75
... More
Single Tee without door
-
-
-
... More
75mm
88
213
18810
... More
110 mm
27
346
9362.25
... More
Single Tee with door
-
-
-
... More
75mm
-
-
-
... More
110 mm
36
403
14535
... More
Bend with door (87.5°)
-
-
-
... More
75mm
-
-
-
... More
110 mm
36
294
10602
... More
Clean Out Plug (COP)
-
-
-
... More
75mm
20
133
2660
... More
110 mm
26
190
4940
... More
Reduced 'Y' Fitting without door
-
-
-
... More
110mm x 75mm
6
318
1909.5
... More
Reduced Tee with door
-
-
-
... More
110mm x 75mm
46
351
16169
... More
Coupler
-
-
-
... More
75mm
77
133
10241
... More
110mm
203.24
209
42477.16
... More
Vent Cowl
-
-
-
... More
110mm
25
85
2137.5
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes - 10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. For Wash basin & Urinal
-
-
-
... More
32mm dia. Pipe
148.16
175
26039.12
... More
50mm dia. pipe
51.48
327
16872.57
... More
Elbow (45°)
-
-
-
... More
32mm
28
42
1197
... More
50mm
6
66
399
... More
Elbow (90°)
-
-
-
... More
32mm
43
38
1634
... More
50mm
18
80
1453.5
... More
T fitting
-
-
-
... More
32mm
35
42
1496.25
... More
50mm
15
95
1425
... More
Coupler
-
-
-
... More
32mm
48.73
33
1620.27
... More
50mm
17.16
57
978.12
... More
Providing, fixing, jointing and testing , of PVC Multi Floor Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge. 110mm x 75mm x 50mm/40mm (Toilet)
34
1159
39406
... More
Providing, fixing, jointing and testing , of PVC Nahani Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge. 110mm x 75mm (Toilet & Kitchen)
54
1092
58995
... More
Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony)
88
137
12101.76
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :150 x 100mm size P-type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
19
1909
36274.04
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:100 mm diameter
38
309
11770.5
... More
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.
215
245
52866.35
... More
Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered)
-
-
-
... More
Depth not exceeding 1.5 meter
429
50
21582.99
... More
Depth 1.5 to 3.00 meter
429
56
24444.42
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
143
388
55561.22
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia. RCC Pipes
143
518
74198.41
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. (i) For Sewer Line
18
8917
160506.54
... More
Extra for depth for manholes: Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5
9
6162
55461.06
... More
Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
18
386
6959.16
... More
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work)
-
-
-
... More
65mm nominal bore.
22
626
13773.1
... More
50mm nominal bore.
77
532
40977.09
... More
40mm nominal bore.
154
430
66350.9
... More
32mm nominal bore.
22
377
8299.72
... More
25mm nominal bore.
242
326
79039.62
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
65mm nominal bore.
1
1216
1216.46
... More
50mm nominal bore.
1
716
716.86
... More
40mm nominal bore.
1
576
576.82
... More
25mm nominal bore.
1
434
434.59
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) : (horizontal)
-
-
-
... More
65mm nominal bore.
1
1709
1709.35
... More
50mm nominal bore.
1
957
957.44
... More
40mm nominal bore.
1
665
665.15
... More
25mm nominal bore.
1
412
412.95
... More
Constructing masonry Chamber 90X90X100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand ) for sluice valve, with C.I. surface box 100mm, top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
13194
26389.24
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
-
-
-
... More
INTERNAL ELECTRIFICATION
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
608
740
449944.32
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
10
1138
11388.7
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2100
169
356748
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1100
200
220561
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1450
243
353104
... More
2 X 6 sq. mm + 1 X 4 sq. mm earth wire
620
320
198443.4
... More
4 x 10 sq.mm + 2 x 6 sq.mm. earth wire
850
732
622837.5
... More
4 x 16 sq.mm + 2 x 6 sq.mm. earth wire
295
995
293592.85
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 amps modular switch, connection etc. as required.
162
347
56341.98
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
109
427
46570.25
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
27
530
14311.62
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required
119
269
32015.76
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
102
29
2975.34
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
323
63
20487.89
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
440
86
38174.4
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
119
154
18334.33
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required Upto 450 mm sweep
48
328
15748.8
... More
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes.
48
150
7244.64
... More
Supply of Recessed mounting 2x2 feet 36W TO 46 W LED , suitable for 24Hr Continuous Operation, 3000-6000 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
15
4167
62511.3
... More
Supply of surface mounting 2x2 feet 24 to 30W LED , suitable for 24Hr Continuous Operation, 3000-6000 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
105
1466
153983.55
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect
127
889
112966.5
... More
Supply of Recessed mounting 2x2 feet 36W TO 46 W LED , suitable for 24Hr Continuous Operation, 3000-6000 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
22
4167
91683.24
... More
Supply of Surface mounting round 6 Watt 9 Watt , LED Down Lighter, suitable for 24Hr Continuous Operation, 660-1100 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
73
722
52777.54
... More
Supplying of Bulkhead type light fitting complete with, wire guard, holder, electronic ballast 1 x 10 W lamp including connections etc.Including connection with 1.5 sqmm FRLS PVC insulated copper conductor as required.
10
1518
15185.1
... More
Supplying of LED mirror light luminaire with 10W watt complete with electronic ballast, lamp including connection etc. complete as required, Including connection with 1.5 sqmm FRLS PVC insulated copper conductor.
21
1068
22443.75
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect.
12
3443
41320.2
... More
Supplying and fixing brass batten/ angle holder including connection etc. as required.
53
95
5062.03
... More
Supplying of 9 Watt 4 Star LED Wall Light Blub complete in all respect.
53
222
11781.9
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan
119
1990
236865.93
... More
Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required. 300mm EXHAUST FAN
48
2280
109485.6
... More
Supplying, erection, connecting, testing and commissioning of 400 mm Wall Fan complete in all respect.
8
3334
26676
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required
-
-
-
... More
63 A,25KA,FP MCCB
6
9083
54503.4
... More
100 A,30KA,FPMCCB
3
5630
16892.7
... More
125 A,36KA,FPMCCB
1
5985
5985.25
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way Double door
19
3626
68905.02
... More
8 way Double door
6
4350
26103.48
... More
Supplying and fixing following way surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note : Vertical type MCB TP DB is normally used where 3 phase outlet are required.) 4 way (4 + 12), Double door
11
5477
60247.55
... More
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
... More
40 amps TP MCB
16
1840
29442.4
... More
63 amps TP MCB
6
1924
11548.2
... More
40 amps 4P MCB
19
2429
46153.85
... More
63 amps 4P MCB
6
2525
15150.6
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. As required.
-
-
-
... More
25 amps
48
1478
70974.24
... More
40 amps
18
1926
34673.58
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
216
186
40318.56
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole
1
478
478.3
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
127
9
1203.96
... More
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports. The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
-
-
-
... More
The minimum clearances between bus bars shall be as follows :
-
-
-
... More
Phase to phase - minimum 20mm
-
-
-
... More
Phase to neutral-minimum 15mm
-
-
-
... More
BUILDING PANEL-RESIDENCIAL
-
-
-
... More
Incoming :
-
-
-
... More
1 No 100 Amp. 4P MCCB of 10KA Breaking capacity
-
-
-
... More
Metering :
-
-
-
... More
1 Set of CT's one of 100/ 5Amp ratio for Multifunction Meter
-
-
-
... More
1 Set of Phase Indication Lamp.
-
-
-
... More
Bus Bar :
-
-
-
... More
1 No. 125 Amp.TPN aluminimum bus bar of suitable length.
-
-
-
... More
Outgoing :
-
-
-
... More
Phase indication lamps on each outgoing to be provided.
-
-
-
... More
4 No. 40 Amp FP MCB
-
-
-
... More
2 No. 32 Amp DP MCB
-
-
-
... More
3 No. three phase energy meter
-
-
-
... More
1 No. single phase energy meter
-
-
-
... More
SPARE & SPACE- 2 No
-
-
-
... More
Panel described as above
1
94536
94536.4
... More
BUILDING PANEL-ADMIN
-
-
-
... More
Incoming
-
-
-
... More
1 No 320 Amp. 4P MCCB of 25KA Breaking capacity
-
-
-
... More
Metering :
-
-
-
... More
1 Set of CT's one of 320/ 5Amp ratio for Multifunction Meter
-
-
-
... More
One (1) Set of Phase Indication Lamp.
-
-
-
... More
Bus Bar :
-
-
-
... More
One (1) No. 400 Amp.TPN aluminimum bus bar of suitable length.
-
-
-
... More
One (1) No. 200 Amp.TPN aluminimum bus bar of suitable length.
-
-
-
... More
Bus Coupler Section :
-
-
-
... More
1 No 160 Amp. 4P MCCB of 25KA Breaking capacity
-
-
-
... More
Outgoing :
-
-
-
... More
Phase indication lamps on each outgoing to be provided.
-
-
-
... More
3 No. 125 Amp 4P MCCB. with thermal Magnetic release
-
-
-
... More
1 No. 100 Amp 4P MCCB. with thermal Magnetic release
-
-
-
... More
1 No. 80 Amp 4P MCCB. with thermal Magnetic release
-
-
-
... More
6 No. 63 Amp 4P MCCB. with thermal Magnetic release
-
-
-
... More
SPARE & SPACE- 2 No
-
-
-
... More
Panel described as above
1
164322
164322.45
... More
BUILDING PANEL-ADMIN
-
-
-
... More
Incoming
-
-
-
... More
1 No 320 Amp. 4P MCCB of 25KA Breaking capacity
-
-
-
... More
Metering :
-
-
-
... More
1 Set of CT's one of 320/ 5Amp ratio for Multifunction Meter
-
-
-
... More
One (1) Set of Phase Indication Lamp.
-
-
-
... More
Bus Bar :
-
-
-
... More
One (1) No. 400 Amp.TPN aluminimum bus bar of suitable length.
-
-
-
... More
One (1) No. 200 Amp.TPN aluminimum bus bar of suitable length.
-
-
-
... More
Bus Coupler Section :
-
-
-
... More
1 No 160 Amp. 4P MCCB of 25KA Breaking capacity
-
-
-
... More
Outgoing :
-
-
-
... More
Phase indication lamps on each outgoing to be provided.
-
-
-
... More
3 No. 125 Amp 4P MCCB. with thermal Magnetic release
-
-
-
... More
1 No. 100 Amp 4P MCCB. with thermal Magnetic release
-
-
-
... More
1 No. 80 Amp 4P MCCB. with thermal Magnetic release
-
-
-
... More
6 No. 63 Amp 4P MCCB. with thermal Magnetic release
-
-
-
... More
SPARE & SPACE- 2 No
-
-
-
... More
Panel described as above
1
242456
242456.15
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each
4
196
784.52
... More
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required.
5
5447
27239.45
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
120
104
12598.8
... More
Providing and laying earth connection from earth electrode
with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth
electrode including connection with G.I. thimble excavation and
re-filling as required.
75
209
15694.5
... More
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
95
177
16901.45
... More
Supplying, drawing, connecting and testing of 0.5 mm dia annealed copper conductor PVC insulated PVC sheathed telephone wire in existing conduit/wire way duct etc. as required of following sizes:
144
27
3988.8
... More
Providing, laying, connecting and testing of multi-core telephone armoured cable of conductor size 0.5mm dia annealed copper conductor PVC insulated PVC sheathed jelly filled (as per DOT specification) cable along wall or ceiling or through existing pipe.
200
251
50350
... More
Providing, fixing connecting and testing of under noted size of solderless telephone tag block Krone make in surface/recess in wall required size of M.S. box with hinged lockable cover duly stove enamel painted.
2
3288
6577.8
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20mm dia PVC conduit
700
93
65331
... More
25mm dia PVC conduit
240
105
25372.8
... More
32mm dia PVC conduit
160
134
21465.6
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required 1 or 2 Module (75mmX75mm)
49
217
10646.23
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required Telephone socket outlet
6
107
647.46
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required TV antenna socket outlet
9
107
971.19
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required Bell push
3
102
306.24
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required RJ-45 Data Socket outlet
43
594
25572.1
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
840
41
34910.4
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc
-
-
-
... More
3.5 x 185 sq.mm
650
1232
801216
... More
3.5 x 50 sq.mm
245
627
153801.2
... More
3.5 x 35 sq.mm
540
527
285055.2
... More
4 x 16 sq.mm
460
450
207271.4
... More
6 sqmm 3 core
250
374
93692.5
... More
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
-
-
-
... More
2 X 6 sq. mm (19mm)
14
174
2449.86
... More
3½ X 35 sq. mm (32mm)
14
269
3766.56
... More
3½ X 50 sq. mm (35mm)
10
301
3011.2
... More
3½ X 185 sq. mm (57mm)
14
637
8931.58
... More
4 X 16 sq. mm (28mm)
20
225
4505.8
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.
60
487
29266.8
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm wide x 50 mm depth x 1.6 mm thickness.
20
522
10440.8
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.
8
845
6760.24
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm wide x 50 mm depth x 1.6 mm thickness.
2
925
1851.36
... More
Supplying and installing following size of perforated Hot Dipped
Galvanised Iron cable tray "Tee" (galvanisation not less than 50
microns) with perforation not more than 17.5%, in convenient
sections, joined with connectors, suspended from the ceiling
with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.
6
967
5805.18
... More
Supplying and installing following size of perforated Hot Dipped
Galvanised Iron cable tray "Tee" (galvanisation not less than 50
microns) with perforation not more than 17.5%, in convenient
sections, joined with connectors, suspended from the ceiling
with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.
2
1008
2016.72
... More
Supplying and fixing call bell/ buzzer suitable for single phase,
230 V, complete as required.
3
72
216.54
... More
Providing, laying, connecting and testing of unarmoured TV cable RG-6 PVC insulated cable along wall or ceiling or through existing pipe.
162
34
5551.74
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
10
482
4826.7
... More
FIRE FIGHTING
-
-
-
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. (EXTERNAL WORKS) 100 mm dia.
40
3325
133000
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :100 mm dia.
2
4860
9721.92
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100 mm dia.
2
8056
16113.28
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904
as required :2 way - 100 mm dia M.S. Pipe (Siamese Connection)
2
4915
9831.28
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all
respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head
2
62851
125702.56
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. (for terrace booster pump)
2
1127
2254.4
... More
Providing & fixing of start/stop push buttons including complete connection etc. as required. (for terrace booster pump)
1
807
807.5
... More
Providing and fixing in position the industrial type pressure
gauges with gun metal / brass valves complete as required (for terrace booster pump)
2
872
1744.02
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia.
4
4860
19443.84
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm dia.
2
8056
16112.68
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
80 mm nominal bore
5
1374
6871.8
... More
100 mm nominal bore
88
1862
163932.56
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal
5
5574
27873.8
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 40 m
5
8802
44012.6
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun metal
10
3792
37928.2
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal
5
1761
8807.65
... More
Providing and fixing standard fire mans axe with heavy duty insulated rubber handle.
5
1558
7790
... More
Providing of FHC Door made of 16 gauge MS Sheet with frame of size 105x70mm complete door and frame assembly including all hardwares (Concealed Flush handle,Allen Key Lock, MS Hinges, 5mm Thick Float glass) & accesories . The door to be painted with fire resistance paint. The scope shall also include the painting of the frame with the same paint as the shutter or complete as per direction of Engineer-in-charge.
(Approx. size of door: 900mm Wide & 1500mm Height)
5
9025
45125
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
5
963
4815.75
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
2
13301
26603.68
... More
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
5
11381
56905
... More
Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
5
8645
43225
... More
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.
5
950
4750
... More
Fabricating & Supply, installing, testing and commissioning of sheet steel clad floor mounting control panel having suitable size for control of 1 nos. booster pumps 5.5 KW/7.5HP each having suitable incoming MCCB, incoming voltmeter with selector switch and fuses. DOL Starter with hand reset overload cum single phase preventor type relay, Ammeters to read current in any one phase, alarm with reset push button which will automatically reset for the next cycle. (As per the Technical Specifications) (At Terrace floor)
2
19000
38000
... More
Supply, installation , testing & commissioning of XLPE insulated and PVC outer sheathed Aluminium conductor armoured cable of 1.1 KV grade confirming to IS : 7098:1988 (with upto date amendments) of following sizes. 3 Core, X 6 sqmm.
49
262
12847.8
... More
Supplying and making end termination with brass compression gland & Al.lugs for following sizes of PVC insulated, PVC sheathed/ XLPE Al.conductor cables of 1.1 KV grade as required. 3 Core, X 6 sqmm.
8
72
577.6
... More
Supplying and laying control wiring with multicore copper stranded conductor of following sizes PVC insulated, PVC sheathed armoured cable between various sensors and system controller/starter etc.in pump house & out side on surface/existing cable tray complete with connections at both end with glands etc.as required 2 x 2.5 sq.mm
54
137
7438.5
... More
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width x 50mm depth x 1.6 mm thickness.
49
440
21578.62
... More
Boring
-
-
-
... More
Transportation Charges of drilling equipment including assembly and other material as required.
1
9500
9500
... More
Drilling of 675 mm. dia by rotary machine
90
1235
111150
... More
Supply & laying of 350 mm. dia housing pipe (8 mm. thick)
40
2185
87400
... More
Supply & laying of 200 mm. dia blind pipe (8 mm. thick)
20
1710
34200
... More
Supply & laying of 200 mm. dia slotted pipe (8 mm. thick)
30
1710
51300
... More
Supply & fixing of 350 mm. dia Socket
8
1330
10640
... More
Supply & fixing of 200 mm. dia Socket
11
760
8360
... More
Supply & fixing of 200 mm. dia Bail plug
1
1140
1140
... More
Supply & fixing of 350 mm. dia well cap
1
1710
1710
... More
Supply & fixing of 350x200 mm. dia reducer.
1
3610
3610
... More
Supply & fixing of 350 mm. dia housing clamp
1
1900
1900
... More
Supply & Filling of pee gravel 2 mm. 4 mm. in side of bore after lower and development as required as per direction of E/I.
32
2185
69920
... More
Development by air compressor including Transportation.
20
1710
34200
... More
Development by O.P. Unit including Transportation.
35
1425
49875
... More
Supply of submersible pump suitable for tube well capable of pumping clear and cold water free from chemical and directly coupled with electric moter operating of 415 volt suitable for 3 phase 50 cycle A.C. Supply of following duty condition. (A) - Discharge of water in LPM 860 Approx size of discharge outlet in 80 mm. (B) - Total Head of pump set 45 m.
1
59850
59850
... More
Supply and fixing of finolex or equivalent ISI marked submersible copper cable of size 2x3x2.5 sq. mm.
55
171
9405
... More
Supply of control panel cubical type wall mounted vermin proof with internal wiring duly enameled painted and mechanically finished having L&T of qul. Male switch fuse unit with HRC fuses, Ameter, Boltmeter, Selector switch, phase indicating lamp with bulbs, instrument fuses, power capcitor single phase preventor etc. complete set with supply of Jyoti or eq. Air break Star- Delta motro starter suitable for above submersible pump set.
1
17100
17100
... More
Supply of 80mm dia M.S. column pipe of class 'C' both and socketed with heavy sockets in 3/6 meter length and one end flanged complete with interlocking arrangements.
55
1710
94050
... More
Supply of 80mm dia M.S. column pipe clamps with nut, bolts, packing etc.
2
1330
2660
... More
Supply of 80mm dia C.I. double flanged ISI mark reflex valve of updadhya or equ. Make.
1
6175
6175
... More
Supply of 80mm dia C.I. double flanged ISI mark sluice valve with hand wheel of upadhya or equ. Make.
2
7600
15200
... More
Supply of C.I. double flanged bend of 80mm dia i/c cost of material and labour.
1
1377
1377.5
... More
Supply of 80mm dia C.I. tee heavy quality i/c cost of material.
1
5700
5700
... More
Supply of Guru/Fibing or equivalent make pressure gauge.
1
4750
4750
... More
Erection & commissioning of pumping plants complete along with electric wiring.
1
14250
14250
... More
Supply of steel wire rope of 1/2" size
55
47
2612.5
... More
S/B of 600mm x 600 mm x 6.0 mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead on one no. 8 to 10 SWG GI wite in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. , pipe and G.I. wire will be extra) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal. coke and salt at least 150mm thick alround etc. as per directions of E/I complete in all respects as per drawing.
1
4085
4085
... More
S/F of one number 8 to 6 SWG G.I. wire in 15mm dia G.I. Pipe for earthing, laid in ground or in wall duly concealed includingn the cost of cement, sand labour. T&P other material required for proper completion of the work as directed at site.
8
190
1520
... More
S/F of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by E/I complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc.
40
209
8360
... More
Rain Water Harvesting
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-incharge.
-
-
-
... More
In all kind of soil upto 1.5m depth
152.74
123
18930.6
... More
In all kind of soil upto 1.5m to 3.0m. depth
133.43
212
28351.21
... More
In all kind of soil upto 3.0m to 4.5m. depth
64.11
301
19298.39
... More
In all kind of soil upto 4.5 m to 6.0m. depth
21.08
389
8211.92
... More
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
13.07
5501
71900.29
... More
Class M-150 brick work in 1:4 cement coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
89.11
5146
458609.96
... More
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
12.24
6316
77310.29
... More
Suspended floors, roofs, landings, balconies and access platform.
77.74
647
50332.76
... More
Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
11.97
7478
89514.77
... More
12mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand)
271.08
306
83142.95
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
78
380
29665.74
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter
6
818
4912.62
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually.
30
576
17296.5
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia
30
563
16914.3
... More
Supplying, filling, spreading & leveling stone boulders of size range
5 cm to 20 cm, in recharge pit, in the required thickness, for all leads
& lifts, all complete as per direction of Engineer-in-charge.
24.26
1054
25575.38
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to
10 mm, in the recharge pit, over the existing layer of boulders, in
required thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge.
26.22
1074
28162.38
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5
mm to 2 mm in recharge pit, in required thickness over gravel layer,
for all leads & lifts, all complete as per direction of Engineer -incharge.
26.22
1074
28162.38
... More
Gravel packing in tubewell construction in accordance with IS: 4097,
including providing gravel fine/ medium/ coarse, in required grading
& sizes as per actual requirement, all complete as per direction of
Engineer-in-charge.
2
1413
2827.22
... More
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. up to 1.50 m depth Pipes 80 mm to 300 mm diameter
198
245
48686.22
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
198
388
76930.92
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design150 mm. dia.
198
518
102736.26
... More
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
-
-
-
... More
Providing & fixing 75mm dia vent pipes.
-
-
-
... More
Providing & fixing of 75mm dia cast iron terminal guard.
-
-
-
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
... More
M.D. -10- Circular shape 500mm internal diameter
-
-
-
... More
M.D. -2.5- Circular shape 450mm internal diameter
-
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.
-
-
-
... More
LANDSCAPING
-
-
-
... More
Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment).
323.1
230
74616.71
... More
Carrigae of sludge upto 5 K.M.
323.1
169
54914.08
... More
Supplying and stacking at site dump manure from approved source including carriage upto 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm
53.85
251
13531.43
... More
Carrigae of manure upto 5 K.M.
53.85
169
9152.35
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.
376.95
28
10822.23
... More
Spreading of sludge, dump manure or/and good earth in required thickness (cost of sludge dump manure or/and good earth to be paid separately).
376.95
41
15500.18
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%), flooding with water, dressing, including removal of rubbish and surplus earth, if any with all leads and lifts ( cost of manure, sludge or extra good earth if needed to be paid for separately).
20
263
5270.6
... More
Providing & stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge.
20
510
10211.4
... More
Providing & stacking of Pinus longifolia (Pinus) of height 90-105 cm. in cement pots of size 35cm as per direction of the officer-in-charge.
20
432
8640.4
... More
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately). With grass Turf.
1077
13
14970.3
... More
Side Development
-
-
-
... More
C.C. Interlocking
1158
1378
1596106.14
... More
Supply & Filling of Carted Earth
220
489
107608.6
... More
SOLAR POWER GENERATION SYSTEM 25 KW
25
40833
1020841.5
... More
COST OF CCTV SYTEM
1776.62
146
260505.79
... More
COST OF SMART CLASS ROOM
1
1147600
1147600
... More
COST OF RECREATION AND SPORTS
1
724850
724850
... More
COST OF AUTOMATIC ELECTRICAL SANITARY NAPKIN INCINERATOR AND SANITARY NAPKIN VENDING MACHINE
1
176700
176700
... More
GST Extra as applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements