Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date2 May 2022
Closing Date7 May 2022
Tender AmountRefer Documents
Costs
EMD
₹ 33,000Document Cost
₹ 8,260Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_UPPRC_695363_8Bid Award Id
ViewTender No
01/2022-23/PM/Basti/E-tenderTender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 stone ballast 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
21
-
3610
Making apron(with Drain & other )analysis
48.02
-
512.15
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surroundings of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (Part II 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or chlordance will be used. The rate of application of chemical emulsion shallbe as follows : (1)Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contract with foundation 7.5 liters/sqm (3) Treament of joint of walls and the floors 7.5 liters per sqm (4) Treatment of top surface of plinth. filling 5 litres per sqm (5)Treatment of soil along externalperimeter of building 7.5 liters/sqm. (6) Treatment of soil under apron along external perimter 5 liters/ sqm.
93.17
-
266
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5corse sand 3 grit) in lintels of doors and windows excluding supply of reinforcement and its fixing and bending but including its fixing and binding the same necessary with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not be less than M-20.
5.64
-
8221.61
As in item 7 above but for slabs (Using 1:1.5:3 Mix concrete)
12.74
-
8360
As in item 7 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)
1.27
-
8573.75
Class 150 brick work in 1:6 cement and coarse sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
58.79
-
4322.5
Class 150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms.
46.3
-
5082.5
First class/ Class 150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulus mortar in super-structure including necessary cutting and moulding of brick work as required and also including honey combed brick work in wall thickness 12 cms & below..including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
8.01
-
4840.25
Painting on D.P.C. with two coats of air blown bitumen 85/50 OR 85/25 @ 1.7 KG/SQM approx including cost of fuel if any.
14.42
-
57
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge.
-
-
-
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm
93.17
-
807.5
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) including fixing of wooden cleats & stopper and including fixing and adjustment of hinges bolts, locks handles, springs and other fittings and other fitting but including their supply and including painting with two coats of black japan paint on iron fitting if necessary. fitting with departmentally :35 mm thick
10.4
-
1574.48
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured
2.52
-
1647.63
Mild steel or iron work of small sizes and sections such and holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.
-
-
-
Fabrication of hold fast for door chaukhats and windows.
8.84
-
72.68
Fabrication of grill
342.92
-
66.5
Fabrication of Z-section steel windows. With fixed panel
281.42
-
66.5
Fabrication of angle iron door chaukhat of 40*40*5 mm.
92.43
-
64.6
Fixing of M.S. Chaukhats
-
-
-
(a) Door chaukhats
7
-
71.25
(b) Window chaukhats up to 1.5 sqm
7
-
47.5
(c) Ventilator chaukhats
3
-
38
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
14.32
-
6726
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
20.48
-
193.83
12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering up to floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive. 1 cement : 6 Course sand
200.07
-
152
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 Course sand
254.96
-
182
Making grooves 10 to 12 mm wide x8 mm deep in plaster of the wall or in celing vertically or horizontally as required.
45.51
-
33.25
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) laid in one layer finished with a floating coats neat cement (25 mm thickfloor).
14.41
-
285
Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete.
41.84
-
1159
Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete.
5.89
-
1092.5
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size ) laid in one layer finished with a floating coats neat cement (40 mm thickfloor).
39.55
-
292.6
20 mm thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.
29.31
-
161.5
Supply and fixing 6mm (1/4") thick china white glazed tilesin flooring or in skirting or dado laid with 1:3 cement and approved course sand mortal finished with white cement slurry jointing and polished complete including supply of all materials labour T & P etc. required for proper completion of the work.
11.09
-
907.25
Painting or varnishing new iron work in smallareas or new wood with two coat (up to one sq, meter) of ready mixed priming paint and one coat of approved superior quality ready mix paint (2nd quality synthetic cnamel paint of approved brand such as British paintShalimar, Asian or equivalent supply of all materials, labour, T&P etc. required for proper completion of work. Paint to be used should contim the LSI No. 103-1950
20.54
-
97.38
Same as item above but on new wood surface.
25.84
-
97.38
Finishing walls with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials labour & T&P etc. required for proper completion of the work.
220.55
-
76
One priming coat of cement primer and Two coat oil distemper on new work including supply of all materials labour and tools and plants etc required for proper completion of the work
340.82
-
78.85
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes
12.79
-
655.5
Providing and fixing Oxidized sliding door bolts ISI marked : 300x16 mm
24
-
141.03
Providing and fixing Oxidized tower bolts ISI marked :250x10 mm
48
-
58.31
Providing and fixing Oxidized handles ISI marked : 100 mm
24
-
22.07
Plumbing work
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
-
4583.31
Same as above but for European type W.C. pan with white plastic seat and lid.Make- Cera,Hindware.
1
-
4392.41
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require
-
-
-
a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.
3
-
2640.43
Providing & fixing stainless steel AISI 304 (18/8) kitchen sink with drain board as per IS :13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets cutting and making good the walls wherever required.
1
-
2990
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
a) 32mm dia
3
-
72.11
b) 40mm dia
1
-
80.59
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3
-
1118.72
Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge.
-
-
-
15mm nominal bore
1
-
237.32
Providing and Fixing C.P. brass Ablution health faucet assembly with 1.0 m long braided PVC hose with mounting bracket fixed on wall complete
2
-
669.75
Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15 mm nominal bore
1
-
399
Supplying & Fixing of CP soap tray fixed to the wall with PVC rubber plug with CP brass screws- Make-ESSCO AEC-1131
3
-
90.25
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.
-
-
-
a) 110mm diameter
12
-
249.76
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
-
-
-
a) 110mm
4
-
211.36
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
a) 110mm
8
-
245.27
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
4
-
37.41
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints for vertical pipes and solvent cement joints for horizontal pipes, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, cowels, clamps, hangers, rubber rings, clean outs etc. fixing at wall / ceiling / floor level supported by clamp & hangers etc. inside duct / suspended from floor under false ceiling for proper completion of the work. The rubber ring shall confirm to IS:5382. (Make : Supreme / Finolex / Prince) (Pipe support : Intellotech / Easyflex / Chilly)
-
-
-
The Pipes will be supported by either rubber lined G.I. U strap clamps on 50x50x5 mm MS slotted angle duly painted (for a group of pipes) or G.I. rubber lined split clamp (for independent pipes). The The cost will include all support arrangements. The work includes cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.
-
-
-
110 mm dia
14
-
755.25
75 mm dia
14
-
489.25
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince)
-
-
-
110x110 mm P-Type
4
-
527.25
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.. (Make : Supreme / Finolex / Prince)
-
-
-
Reducing Tee 110x110x75 mm
1
-
304
Door Tee
-
-
-
110x110x110 mm
1
-
399
75x75x75 mm
1
-
365.75
110 mm
1
-
242.25
75 mm
1
-
123.5
Terminal guard.
-
-
-
110 mm
1
-
57
75 mm
1
-
33.25
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.
-
-
-
(internal work)
-
-
-
Exposed on wall
-
-
-
a) 25mm dia nominal bore (medium duty)
12
-
383.67
Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.
-
-
-
a) 25mm dia nominal bore.
12
-
20
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
(internal work)
-
-
-
Exposed on wall
-
-
-
a) 20mm dia nominal outer dia pipes
12
-
253.94
b) 25mm dia nominal outer dia pipes
12
-
319.11
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.
-
-
-
Concealed work including cutting chases and making good the walls etc.
-
-
-
a) 15mm dia nominal outer dia pipes
10
-
344.57
b) 20mm dia nominal outer dia pipes
10
-
401.29
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
-
-
-
a) 15mm nominal bore
3
-
334.4
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
a) 15mm nominal bore
3
-
553.33
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
-
-
-
a) 15mm nominal bore
4
-
390.82
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
a) 25mm dia nominal bore
1
-
415.82
b) 32mm dia nominal bore
1
-
446.5
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
-
-
-
a) 25 mm nominal bore
1
-
311.77
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
-
-
-
a) Circular Tank
2000
-
7.3
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,
-
-
-
in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
a) Pipes 80mm to 300mm diameter.
15
-
327.89
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
a) 100mm diameter
13
-
297.88
b) 150mm diameter
13
-
468.84
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
a) 100mm diameter S.W. Pipe
12
-
709.93
b) 150mm diameter S.W. Pipe
12
-
868.21
Providing and fixing square mouth S.W. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not
-
-
-
less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design.
-
-
-
a) 150 x 100 mm. size P type
-
-
-
With Sewer bricks conforming to IS : 4885
2
-
1961.65
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design
-
-
-
Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
-
-
-
With FPS bricks of class designation 75
-
-
-
(i) For Sewer Line
2
-
9265.24
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design
-
-
-
With 20x20 mm square bar
5
-
365.75
ELECTRICAL WORK
-
-
-
Wiring point for light with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
33
-
579.5
Wiring point for two ways light with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and two number two way piano type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
1
-
751.45
Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash.
10
-
637.45
Wiring point for plug with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and piano type switches & socket etc., complete in all respects as directed, including matching color wash.
10
-
310.65
Wiring points for Call bell with 1 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire and piano type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash.
1
-
543.4
Addition for light / fan points with modular type switch in place of piono type switch.
15
-
41.8
Addition for two way points with modular type switch in place of piono type switch.
1
-
156.75
Addition for HPSV/Exhaust Fan points with modular type switch in place of piono type switch.
10
-
44.65
Addition for plug points with modular type switch in place of piono type switch.
6
-
78.85
Addition for call bell points with modular type switch in place of piono type switch.
1
-
76
Supply fixing and concealing of 20mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. ( T.V. /Telephone)
10
-
58.9
Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.
15
-
114.95
Supply & wiring of submains with two number 4 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.
28
-
141.55
Supply and wiring of submain with two number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multi strand single core copper conductor cable in 20 mm dia. heavy duty (2 mm thick) PVC conduit with 1 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multi strand core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.
28
-
99.75
Supply & fixing of single wall bracket on matching M.D.F.E.G. board base etc. complete in all required.
-
-
-
Cat. A
9
-
1567.5
S/F of LED tube light with batten suitable for up to 1X22 watt LED tube light fitting including tube on suraface complete in all respect. CAT-AAA
-
-
-
a) 1x22 Watt.
9
-
1130.5
Supply anf fixing of recess / Surface /Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder Coated die cast aluminium housing with heat sink diffuser / Reflector and driver set complete in all respect. ( Mirror Light)
-
-
-
Category AA
9
-
1282.5
S/F of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection.complete in all respect.
CAT -AAA
1
-
1330
Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG board brass including connection etc. as required.
1
-
166.25
Supply & fixing of buzzer on polished MDFEG/Teak ply board including making connections etc. complete in all respect.
1
-
133
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
1
-
5111
Supply and burying of 40mm dia x 4.5 metres long G.I. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.6 to 8SWG G.I.wire in G.I. pipe upto appron (and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I.box with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
1
-
3872.2
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.
5
-
85.5
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.
5
-
199.5
Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve
-
-
-
5 - 32 amps.Cat. A
4
-
247
Supply and fixing of 40 Amp. 4 Pole MCB (10KA)
-
-
-
CAT A
2
-
2161.25
Supply and fixing of 63 Amp. 4 Pole MCB (10KA)
-
-
-
CAT A
1
-
2175.5
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.
-
-
-
600x480x200 mm. size
1
-
617.5
Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work.
-
-
-
600x480x200 mm. size
1
-
1634
Supply and fixing of surface/ flush mounting 6 way TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer Incharge.
-
-
-
CAT A
-
-
-
Supply & fixing of Crimping, solder, less, copper ton electroplated lugs of Dowel/ismail make suitable for 1.5 sqmm to 6sqmm cables, including tapping with insulating tape, etc. complete in all respects.
5
-
14.25
Supply and fixing of single pole MCB blanking plate
-
-
-
CAT B
15
-
19
Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work.
4
-
593.75
Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge.
2
-
1539
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
6
-
133
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
3
-
185.25
Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required.
3
-
769.5
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.
6
-
142.5
Supply fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
6
-
253.65
CABLES
-
-
-
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the
-
-
-
cable run shall be fixed on M.S. clamps etc. of suitable size. S.I.No.501(I)
-
-
-
25 sqmm 3.5 core
5
-
354.35
10 sqmm 4 core
2
-
310.65
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire
-
-
-
25 sqmm 3.5 core
2
-
116.85
10 sqmm 4 core
2
-
82.65
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.
-
-
-
25 sqmm
2
-
45.6
10 sqmm
2
-
19
Supply, installation, testing and commissioning of Main Distribution Board suitable for required size incomer and single / three phase outgoing MCB's, IP 42 protection, double metal door, factory fabricated, wall mounting type in surface / recess, powder coated, 415 V / 250 amp copper Bus Bar, earth and neutral bar, removable gland plates, cable glands including connection with outgoing feeders complete in all respect.
1
-
1900
PART (B): SCHEDULE ITEMS
-
-
-
Supplying and drawing following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.
-
-
-
2 Pair
5
-
15.14
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
-
-
-
Telephone socket outlet
1
-
94.82
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.
-
-
-
75mm X 75 mm X 60mm Deep
1
-
111.55
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 Module (75mm X 75 mm)
1
-
193.61
Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.
3
-
133.86
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
100 mm Dia
1
-
418.3
Supply and erection of AC 1200mm Sweep, 230/250 Volts, 60 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required
6
-
1710
Bajaj Speedster 380rpm Bianco Ceiling Fan, Sweep: 1200 mm(MRP-1900)
-
-
-
PART B - NON - SCHEDULED ITEMS (AS PER MARKET RATES )
-
-
-
Supply of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required-Make: USHA Cat No. TURBO JET DLX
-
-
-
300mm sweep.
3
-
1282.5
Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. (Rate is including Royality).
-
-
-
From 0.00 mt to 1.50 mt
13.11
-
109.25
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.
1.26
-
5700
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
-
-
-
As in item no. 3 above but for slabs (Using 1:1.5:3 Mix concrete)
0.66
-
8360
M-150 brick work in 1:4 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
8.65
-
4807
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
0.13
-
5130
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).
2.92
-
508.25
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 Coarse sand
37.67
-
193.83
Providing and fixing soil, waste and vent pipes : 75mm diameter : Sand cast iron S&S pipe as per IS: 1729
1
-
738.51
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:(With 20x20mm square bar)
4
-
365.75
G.S.T. Will be paid Extra as per GST Notification
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements