Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date15 Jun 2023
Closing Date20 Jun 2023
Tender Amount₹ 4,86,95,000
Costs
EMD
₹ 9,74,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_UPPRC_812282_2Bid Award Id
ViewTender No
21/UPPCL/GM-1/E-TENDER/2023-24 Dated-06.04.2023Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Filling by carted earth in trenches, plinth, sides of foundation etc. inlayers not exceeding 20 cms in depth, consolidating each deposited layer by ramming and watering including lead upto 50m & lift upto 1.50m.
153.08
44064
287.85
... More
Coarse Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km. (5 miles) from the site of work and including watering, ramming, dressing etc rate to include cost of all materials, labour and T & P etc required for proper completion of the work. (For SaltpeterTreatment)
149.96
142462
950
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)(For SaltpeterTreatment)
116.72
24061
206.15
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.(For SaltpeterTreatment)
116.72
5433
46.55
... More
Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of form work in foundation & floors.
141.98
660916
4655
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1)Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment of soil along external perimeter of building 7.5 liters/sqm. (5) Treatment of soil under apron along external perimter 5 liters/sqm.
840.12
173988
207.1
... More
First Class brick work in 1:6 cement and coarse sand of mortar in foundation and plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
46.32
228820
4940
... More
Brick work in super-structure above plinth level up to floor five level (up to five storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.0 brick thick. (1:6 cement & coarse sand)
-
-
-
... More
(a) Ground floor
119.58
661498
5531.85
... More
(b) First floor
119.5
661056
5531.85
... More
(c) Second floor
119.5
667666
5587.17
... More
(d) Mumty
11.86
66919
5642.49
... More
Same as in item no. 5 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.
-
-
-
... More
(a) Ground floor
90.44
530543
5866.25
... More
(b) First floor
90.44
530543
5866.25
... More
(c) Second floor
90.44
535848
5924.91
... More
(d) Mumty
22.84
136664
5983.58
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
-
-
-
... More
(a) Ground floor
3.54
30633
8653.58
... More
(b) First floor
3.54
30633
8653.58
... More
(c) Second floor
3.54
30633
8653.58
... More
(d) Mumty
0.2
1730
8653.58
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in slab excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
-
-
-
... More
(a) Ground floor
100.66
889331
8835
... More
(b) First floor
100.66
889331
8835
... More
(c) Second floor
100.66
889331
8835
... More
(d) Mumty
5.1
45058
8835
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in beams excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
-
-
-
... More
(a) Ground floor
114.1
1062271
9310
... More
(b) First floor
59.68
555620
9310
... More
(c) Second floor
59.68
555620
9310
... More
(d) Mumty
3.38
31467
9310
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in raft foundation and footing excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
458.84
3487184
7600
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone ballast in the proportion of 1:1.5:3 (M-20) in columns excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. Binding wire cost being inluded in the item.
-
-
-
... More
(a) Ground floor
51.3
501970
9785
... More
(b) First floor
43.2
422712
9785
... More
(c) Second floor
43.2
422712
9785
... More
(d) Mumty
2.76
27006
9785
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:- 35 mm thick including ISI marked Stainless Steel butt hinges
414.96
653346
1574.48
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
157.5
359271
2281.09
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.
-
-
-
... More
(a) Door / windows & Staircase grill.
3676.32
230505
62.7
... More
(b) Z-Section windows
3456
259372
75.05
... More
(c) Angle iron door chaukhat
4298.8
263430
61.28
... More
Supply and fixing S.S. Mosquito proof heavy quality iron wire gauge or expended metal heavy quality over window and including supply of C.P. teak wood batten 8cm x 1 cm flat iron 25mmx4mm and including supply of necessary screws all materials labor tools & plants etc. required for proper completion of the work.
172.8
109651
634.56
... More
Supply and fixing S.S. Mosquito proof heavy quality iron wire gauge or expended metal heavy quality over window and including supply of C.P. teak wood batten 8cm x 1 cm flat iron 25mmx4mm and including supply of necessary screws all materials labor tools & plants etc. required for proper completion of the work.
98.28
89423
909.89
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks.
-
-
-
... More
(a) Ground floor
956.34
5632842
5890
... More
(b) First floor
263.68
1553075
5890
... More
(c) Second floor
263.68
1553075
5890
... More
(d) Mumty
15.1
88939
5890
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
116.72
24061
206.15
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 coarse sand.
-
-
-
... More
(a) Ground floor
1872.92
311372
166.25
... More
(b) First floor
1872.92
311372
166.25
... More
(c) Second floor
1872.92
311372
166.25
... More
(d) Mumty
517.2
85984
166.25
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor five level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand.
-
-
-
... More
(a) Ground floor
1253.12
241664
192.85
... More
(b) First floor
1253.12
241664
192.85
... More
(c) Second floor
1253.12
241664
192.85
... More
(d) Mumty
60.36
11640
192.85
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations.
840.12
598585
712.5
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
-
-
-
... More
(a) Ground floor
605.7
660001
1089.65
... More
(b) First floor
605.7
660001
1089.65
... More
(c) Second floor
605.7
660001
1089.65
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
-
-
-
... More
(a) Ground floor
66.8
72788
1089.65
... More
(b) First floor
66.8
72788
1089.65
... More
(c) Second floor
66.8
72788
1089.65
... More
P/L 25mm thick Kota Stone flooring over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over jointed with grey cement slurry mix with pigment to match the shade of slab including rubbing & polishing complete.
-
-
-
... More
(a) Ground floor
127.14
150737
1185.6
... More
(b) First floor
120.98
143433
1185.6
... More
(c) Second floor
120.98
143433
1185.6
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 10 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
-
-
-
... More
(a) Ground floor
33.98
46323
1363.25
... More
(b) First floor
33.98
46323
1363.25
... More
(c) Second floor
33.98
46323
1363.25
... More
Providing and laying 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 25 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete.
-
-
-
... More
(a) Ground floor
26.9
94373
3508.3
... More
(b) First floor
26.9
94373
3508.3
... More
(c) Second floor
26.9
94373
3508.3
... More
25 mm cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate of size 12.50mm and below) laid over base concrete and finished with floating coat of neat cement (base concrete to be paid seperately) including fixing of glass strips.
175.08
48733
278.35
... More
Supply and fixing 6 mm (1/4") thick China glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work.
-
-
-
... More
(a) Ground floor
59.66
67785
1136.2
... More
(b) First floor
59.66
67785
1136.2
... More
(c) Second floor
59.66
67785
1136.2
... More
Supply and fixing 6 mm (1/4") thick China glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm).
-
-
-
... More
(a) Ground floor
170.04
193199
1136.2
... More
(b) First floor
170.04
193199
1136.2
... More
(c) Second floor
170.04
193199
1136.2
... More
Painting 1st coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
1730.38
167673
96.9
... More
Same as above but wooden painting
414.96
40209
96.9
... More
Finishing wall with waterproofing cement paint of approved make such as super snowcem Durocem Robiance Guttucem Supercem quality and of required shade on under coated wall surface over and including one coat white cement primer to give and even shade after throughly after brushing the surface.
-
-
-
... More
(a) Ground floor
1989.64
147432
74.1
... More
(b) First floor
1872.92
138783
74.1
... More
(c) Second floor
1872.92
138783
74.1
... More
(d) Mumty
517.2
38324
74.1
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials.
-
-
-
... More
(a) Ground floor
2037.18
199338
97.85
... More
(b) First floor
2037.18
199338
97.85
... More
(c) Second floor
2037.18
199338
97.85
... More
(d) Mumty
60.36
5906
97.85
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
-
... More
(a) Ground floor
3910.1
367744
94.05
... More
(b) First floor
3910.1
367744
94.05
... More
(c) Second floor
3910.1
367744
94.05
... More
(d) Mumty
577.56
54319
94.05
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
172.8
116061
671.65
... More
Providing & fixing oxidising iron sliding door bolts. 250mm long and 16mm dia rod
218
103550
475
... More
Providing & fixing oxidising iron tower bolts 250mm long and 10mm
436
165680
380
... More
Providing and fixing oxidising iron handles (a) 150 mm
436
82840
190
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
218
39691
182.07
... More
Making drain along with the apron.
194.54
172076
884.53
... More
Providing & laying of 40 mm brick ballast under floor of toilet /sunken roofs including compacting as per directed by E/I.
80.54
56619
703
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed
slurry.)
348.2
92951
266.95
... More
Making drip course in sun shade or facia as per direction of Engineer incharge including supply of all materials, labour T & P etc for proper completion of the work.
-
-
-
... More
(a) Ground floor
55.2
1625
29.45
... More
(b) First floor
55.2
1625
29.45
... More
(c) Second floor
55.2
1625
29.45
... More
(d) Mumty
3.6
106
29.45
... More
Boring with hydraulic piling rigs with power units, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 300 mm dia piles
2712
5505956
2030.22
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.
583.22
144026
246.95
... More
(B) ELECTRICAL WORK
-
-
-
... More
Wiring points for light with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash.
542
314089
579.5
... More
Wiring points for two way light with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire and two number two way piano type switches & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash.
16
12023
751.45
... More
Wiring points for Fan /Fresh air fan (light duty exhaust fan ) with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose on 3mm thick phenolic paminated backalite sheet etc. complete in all respects.as directed including matching colour wash.
168
107091
637.45
... More
Wiring points for Plug with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & socket sheet etc.complete in all respects as directed including matching colour wash.
384
119289
310.65
... More
Wiring points for Call bell with 1.5 sqmm. FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash.
24
13041
543.4
... More
Supply fixing and concealing of 20mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of work. ( T.V. /Telephone)
500
29450
58.9
... More
Supply & wiring of submains with 1 nos. 1.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20MM dia heavy gauge PVC conduit pipe partly concealed including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C.
744
85522
114.95
... More
Supply and wiring of submain with 1 number 2.5 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting complete in all respects.
600
84930
141.55
... More
Supply and wiring of submain 1 number 4 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 25mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 Sqmm FR PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects.
900
174420
193.8
... More
Supply and wiring of submain with 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in 32 mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with two number 10 SWG copper earth contunity wire including colour wash etc. complete in all respects.
600
205200
342
... More
Supply and wiring of submain with 1 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multi strand single core copper conductor cable in 20 mm dia. heavy duty (2 mm thick) PVC conduit as earth continuity wire drawn inside the conduit complete in all respect.
300
29925
99.75
... More
Supply & fixing of single wall light bracket made of brass on matching polished MDFEG board brass including connection etc. as required. CAT. AAA
48
75240
1567.5
... More
Supply and fixing of recess/surface mounting round 10 W to 15 W LED Cut out Min 125 mm, Height Min. 40mm, LED Down lighiter having powder coated die cast aluminium housing with heat shink,diffuser/reflector and driver set. suitable for 24Hr Continuous Operation, Complete in all respect. CAT. - AAA
96
123120
1282.5
... More
Supply & fixing of LED Tube light with batten suitable for up to 2x22 watt LED tube light fitting including tube on surface complete in all respect Cat. AAA
28
47614
1700.5
... More
Supply & fixing of LED Tube light with batten suitable for up to 1x22 watt LED tube light fitting including tube on surface complete in all respect Cat. AAA
120
135660
1130.5
... More
Supply & fixing of Batton/Angle holder including making connection etc. as required.
266
15162
57
... More
Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG board brass including connection etc. as required.
24
3990
166.25
... More
Supply & fixing of buzzer on polished MDFEG/Teak ply board including making connections etc. complete in all respect.
24
3192
133
... More
Supply of ceilling fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. BEE 5 Star rated-1200 mm sweep
96
164160
1710
... More
Supply and burying earthing Electorde T-39 (Hot Dip Galvanized), Length 3000 mm, outer pipe 76mm, inner pipe 38, terminal Dia 12mm ,outer G.I.pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Gavanized up to 100 mircon filled with crystalline conducative mixture (CCM) having anti corrosive & conducative property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaning capacity along with 30 cm squre C.I. frame with hinged cover & masonry housing (from electode terminal to switch board , cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified
4
48260
12065
... More
Supplying and fixing of one number 8 SWG G.I. wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P other material required for proper completion of the work as directed at site.
70
13300
190
... More
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.
80
6840
85.5
... More
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.
60
11970
199.5
... More
Supply and fixing of switch box made up of 16 SWG (1.5 mm ) thick M.S. sheet of Following size duly painted with red oxide primer and flushed in wall including cutting of brick work fixing it to the level with cement sand mortar,including matching colour wash supply of all material, labour and T & P etc. required for proper completion of the work.asdirected at site by the engineer in charge. same as in item No. 159 but of size 200x250x65 mm. size
30
4902
163.4
... More
Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve
96
23712
247
... More
Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge. 63 Amp. 4 Pole Isolator-Cat-A
20
20330
1016.5
... More
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 600x480x200 mm. size
24
14820
617.5
... More
Supply and fixing of flush/surface mounting distribution boards with additional metal door without MCB complete in all respects. 4 Way TPN Cat. A
24
82308
3429.5
... More
Supply & fixing of Crimping, solder, less, copper ton electroplated lugs of Dowel/ismail make suitable for 1.5 sqmm to 6sqmm cables, including tapping with insulating tape, etc. complete in all respects.
400
5700
14.25
... More
Supply and fixing of power plug with 15A/250 V flush type switch and 5 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.
144
46512
323
... More
Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge.
16
24624
1539
... More
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
96
12768
133
... More
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
72
13338
185.25
... More
Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required.
72
55404
769.5
... More
S/F of hexagonal fan box with hexagonal/Round G.P. fan box of approved make made up of 1.0 mm thick ISI marked G.P. sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box . Holes should be semi shuttered type with 0.5 mm G.P. Sheet made uppper and lower cover duly screwed fitting with 300mm round zink coated M.S. Bar x 12mm & brand name should be embossed . Fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply off all material, labour, T&P etc. required for proper completion of work.
96
13680
142.5
... More
Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
96
47150
491.15
... More
Supply and fixing of single phase multifunctional electronic energy meter 10 to 60 Amp. capacity fitted in integral box on wall complete in all respect.
24
38714
1613.1
... More
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
... More
(a) 50 sqmm 3.5 core
110
51414
467.4
... More
(b) 150 sqm 3.5 core
70
63640
909.15
... More
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction
-
-
-
... More
(a) 50 sqmm 3.5 core
6
1014
169.1
... More
(b) 150 sqm 3.5 core
2
579
289.75
... More
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.
-
-
-
... More
(a) 50 Sq.mm
18
820
45.6
... More
(b) 150 sqm
6
832
138.7
... More
Supply& Erracetionof factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreise Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc.complete in all respects.
-
-
-
... More
The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above insulated with heat shrink sleeving and mounted on non gyroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides.
-
-
-
... More
The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm.Cubicletype switchboard shall be of cat A & B Only. CAT. B Cubicle Type
-
-
-
... More
Incoming -
2
238830
119415
... More
200 Amp MCCB-1 No.
-
-
-
... More
Outgoing -
-
-
-
... More
63 Amp MCCB - 3 No.
-
-
-
... More
Supply and fixing of danger board fabricated from 10 gauge M.S. sheet as per I.E.rules.
2
161
80.75
... More
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubber matting of tested quality.
2
4845
2422.5
... More
Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
360
13482
37.45
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
-
-
-
... More
(a) Telephone socket outlet
24
2830
117.92
... More
(b) TV antenna socket outlet
72
8490
117.92
... More
Supplying and fixing Bell push outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
24
2677
111.55
... More
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
(a) 1 or 2 Module (75mmX75mm)
120
28492
237.44
... More
(b) 3 Module (100mmX75mm)
384
100047
260.54
... More
(c) 4 Module (125mmX75mm)
144
39353
273.29
... More
(d) 6 Module (200mmX75mm)
48
15374
320.3
... More
(e) 8 Module (125mmX125mm)
48
17363
361.73
... More
(f) 12 Module (200mmX150mm)
72
31379
435.83
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. 50 mm dia
120
61318
510.99
... More
Supply & fixing of 12 Watt LED Bulb - B22 / E27 (Colour Temp.- 6500K / Lumens - 900 lm) cool day light, Input Volts (AC 90V-260V), 3-Star rating suitable for Batten/Angle holder including making connection.Complete in all respect.
266
82632
310.65
... More
Supply & fixing of 225/230mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect.
72
171342
2379.75
... More
Supply and fixing of three phase Electronic energy metre 5.0 Amp. To 40 Amp. complete in all respects.
24
102600
4275
... More
(C) PLUMBING WORK
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
24
108378
4515.76
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
24
103864
4327.67
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
(a) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
24
36412
1517.17
... More
(b) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
24
31957
1331.55
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x510 mm bowl depth 200 mm
24
81327
3388.64
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
72
45449
631.24
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe
-
-
-
... More
32 mm dia
48
3912
81.51
... More
40 mm dia
24
1956
81.51
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia
48
46812
975.27
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
48
35323
735.91
... More
Providing and fixing toilet paper holder : C.P. brass
24
12762
531.76
... More
Supply and fixing of UPVC S.W.R. pipe type -B confirming to IS- 13592 including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar confirming to IS - 14735. Also including excavation of trenches cutting of walls and holes and repairing the walls floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, tee and Y-tee including supply of all material labour and T&P .Required for proper completion of the work.
-
-
-
... More
75 mm O.D.
360
89982
249.95
... More
110 mm O.D.
240
80983
337.43
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
75 mm
72
17742
246.43
... More
110 mm
48
11777
245.37
... More
Supply and fixing of UPVC S.W.R. door bend confirming to IS- 14735
-
-
-
... More
75 mm size
16
2584
161.5
... More
110 mm size
24
4674
194.75
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain)
-
-
-
... More
75 mm Shoe
24
1520
63.35
... More
110 mm Shoe
16
1448
90.56
... More
Supply and fixing of UPVC S.W.R. Plain Tee confirming to IS- 14735
-
-
-
... More
75x75x75 mm size
48
7524
156.75
... More
110x110x110 mm size
48
11400
237.5
... More
Supply and fixing of UPVC S.W.R. Plain bend confirming to IS- 14735
-
-
-
... More
75 mm size
72
9712
134.9
... More
110 mm size
48
8892
185.25
... More
Supply and fixing of UPVC S.W.R. Door Y confirming to IS- 14735
-
-
-
... More
75 mm size
72
16074
223.25
... More
110 mm size
48
14364
299.25
... More
Supply and fixing of UPVC S.W.R. Cowel confirming to IS- 14735 110 mm size
16
1094
68.4
... More
Supply and fixin g of UPVC S.W.R. Nahni trap size 100/75mm, 100/90mm confirming to IS - 14735 self cleannig design fixed in PCC 1:2:4 and supply and fixing of 125mm dia heavy duty CP brass jali.
108
89262
826.5
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms.
48
5485
114.28
... More
Providing & fixing C.P. towel ring round shape 250 mm dia with minimum distance of 37 mm from wall face with concealed fittings arrangement of approved quality.
48
34200
712.5
... More
Providing and fixing 600 mm long C.P. towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality.
48
54720
1140
... More
Providing and Fixing C.P. brass Ablution health faucet assembly with 1.2 m long braided PVC hose with mounting bracket fixed on wall complete.
24
19380
807.5
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall
-
-
-
... More
32 mm nominal outer dia pipes
168
73956
440.22
... More
40 mm nominal outer dia pipes
240
135938
566.41
... More
50 mm nominal outer dia pipes
120
83720
697.67
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
20 mm nominal outer dia Pipes
240
61857
257.74
... More
25 mm nominal outer dia Pipes
240
77731
323.88
... More
32 mm nominal outer dia Pipes
360
142970
397.14
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.
-
-
-
... More
15 mm nominal outer dia pipes
180
62022
344.57
... More
20 mm nominal outer dia pipes
300
120387
401.29
... More
Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. External work 65 mm dia, nominal bore
80
48027
600.34
... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)
-
-
-
... More
25mm dia, nominal bore
8
3326
415.82
... More
32 mm dia, nominal bore
4
1843
460.77
... More
40 mm dia, nominal bore
4
2209
552.46
... More
50 mm dia, nominal bore
4
2744
686
... More
65 mm dia, nominal bore
2
2328
1164.37
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
25 to 40 mm nominal bore
4
2365
591.37
... More
50 to 80 mm nominal bore
4
4729
1182.33
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore
120
7986
66.55
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter
48
6236
129.93
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work (internal work -exposed on walls)
-
-
-
... More
32 mm nominal outer dia pipes
168
4028
23.98
... More
40 mm nominal outer dia pipes
240
6758
28.16
... More
50 mm nominal outer dia pipes
120
4035
33.63
... More
Painting GI pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality. 65 mm dia, nominal bore
80
1955
24.44
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work 65 mm dia, nominal bore
80
17707
221.34
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
20 mm nominal bore
24
7450
310.44
... More
25 mm nominal bore
24
7482
311.77
... More
Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
-
-
-
... More
32mm nominal bore
8
2558
319.82
... More
40mm nominal bore
8
3269
408.67
... More
50mm nominal bore
8
4416
552
... More
Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm nominal bore
48
16279
339.15
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore
72
39839
553.33
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore
120
46898
390.82
... More
Providing 15 mm dia. inlet C.P. brass Providing and Fixing C.P. Single flow overhead shower (Without Arm)-parryware T9901A1
48
31920
665
... More
Providing & fixing 15 mm dia. C.P.2-in-1 wall mixture with accessories for shower. .PARRYWARE G3416A1
48
100320
2090
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
16000
121280
7.58
... More
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.
170
55418
325.99
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter
170
79702
468.84
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W./R.C.C. pipe
170
120621
709.54
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
24
47079
1961.65
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Fisnihed with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
30
277957
9265.24
... More
Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
15
96648
6443.24
... More
(D) C.C. ROAD
-
-
-
... More
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loan clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in alead of 50m.
29.8
4529
152
... More
Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
15.78
73455
4655
... More
Class 150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
3.36
16598
4940
... More
Providing and Laying C.C.Road slab consisting of 1:2:4 cement coarse sand & approved 20 mm Gauge stone ballast ,over prepared sub grade after its rectifications & bringing it to proper camber & including supply of all materials,labour and T & P etc.required for proper completion of work finished to required for proper completion of work finished to required templete as direction by Engineer-In-Charge but excluding cost of required for rectification of the sub grade
8.77
64152
7315
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
6.88
40523
5890
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade 'A' sealing compound.
19.48
114
5.86
... More
(E) RAIN WATER HARVESTING
-
-
-
... More
Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.
140.22
21313
152
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
182.54
4335
23.75
... More
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
4.52
21040
4655
... More
R.C.C. work with cement approved coarse sand and 2 cm Gauge approved stone ballast in the proportion of 1:1.5:3 (1cement : 1.5coarse sand : 3stone ballast) in Slab, excluding supply of reinforcement and its bending with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and T&P etc. required for proper completion of the work.
2.9
25621
8835
... More
M-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools and plants etc required for proper completion of work.
34.64
171121
4940
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
3.42
20143
5890
... More
15 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) in single coat on rough side of single or half brick wall. In plinth.
62.18
12818
206.15
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar
30
10972
365.75
... More
Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
2
5028
2514.33
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 400 mm dia
50
32370
647.41
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia
53.3
39631
743.56
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, onforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia
4
3434
858.61
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7.06
7181
1017.21
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.
7.06
7218
1022.45
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
7.06
7218
1022.45
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge.
4.7
5430
1155.43
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in pproved laboratory, i/c disinfection of ubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per uirement and direction of Engineer-in-charge.
20
14322
716.1
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia
2
438
219.45
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia
2
482
241.01
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
100
32599
325.99
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe
100
39092
390.92
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round P.V.C. pipes including bed concrete as per standard design: 150 mm diameter P.V.C. pipe
100
86821
868.21
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
27313
6828.33
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
44311
4431.18
... More
(F) SEPTIC TANK AND SOAK PIT
-
-
-
... More
Earth work in excavation in trenches for foundations and pipes cables etc in ordinary soil (loan clay or sand) including lift upto 1.5 m, lead upto 50 m and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer- in- charge with in a lead of 50m .
-
-
-
... More
(a) In all kind of soil upto 1.5m depth
49.44
7514
152
... More
(b) In all kind of soil upto 1.5m to 3.0m. depth
28.78
5058
175.75
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
2.87
13359
4655
... More
First class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc reqiored for proper completion of the work.
12.75
62985
4940
... More
2 cm thick cement plaster in dado of skirting in 1:2 consisting of one part of cement and Three parts of approved coarse sand laid in panels, finished with 3 mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
40.41
8292
205.2
... More
40 mm thick cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
10.72
4501
419.9
... More
RCC work providing and laying in position specified grade of reinforced cement concrete Slab including the cost of centering, shuttering, finihing and excluding reinforcement-above plinth level upto floor: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
2.68
23677
8835
... More
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
1.68
9895
5890
... More
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
14
5120
365.75
... More
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
2
1191
595.65
... More
Providing & fixing 75mm dia vent pipes.
1
727
727.62
... More
Providing & fixing of 75mm dia cast iron terminal guard.
1
248
248.59
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
... More
(a) M.D. -10- Circular shape 500mm internal diameter
4
3350
837.68
... More
(b) L.D. -2.5- Circular shape 450mm internal diameter
2
1661
830.67
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks
2
44441
22220.81
... More
(G) DRAIN
214.13
460026
2148.35
... More
G.S.T. Extra as per Applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements