Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Eprocure
Opening Date25 Oct 2024
Closing Date4 Nov 2024
Tender Amount₹ 8,75,65,000
Costs
EMD
₹ 17,52,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPPRC_968500_1Bid Award Id
ViewTender No
20/GM-3/UPPCL/2024-25 DATED 17.10.2024Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
52.09
1496
77966.75
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
46.54
4800
223435.28
Providing and laying in position ready mixed cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland
Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum All works above plinth level upto floor V level
48.5
6698
324887.92
Concrete of M25 grade with minimum cement content of 330 kg /cum
41.51
6949
288468.35
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
60.97
276
16850.89
Suspended floors, roofs, landings, balconies and access platform
112.06
653
73231.21
Lintels, beams, plinth beams, girders, bressumers and cantilevers
300.88
519
156156.72
Columns, Pillars, Piers, Abutments, Posts and Struts
241.42
677
163562.05
Edges of slabs and breaks in floors and walls Under 20 cm wide
28.52
146
4191.87
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landings, beams and balconies (Plan area to be measured) G.F.
242.25
270
65613.41
Brick Work with common burnt clay ( non modular) bricks of class - 150 in foundation and plinth in: Cement mortar 1:6 ( 1 cement : 6 coarse sand)
17.14
5026
86156.61
Brick Work with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 ( 1 cement : 6 coarse sand)
74.58
6417
478628.34
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
449.91
792
356342.22
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7Kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
34.12
103
3514.36
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
381.38
218
83339.16
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration
98.4
37
3706.73
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
131.69
7601
1000977.01
Providing and fixing s.s. door bolts, ISI marked with nuts and screws etc. complete : 250mm x 16mm .
34
617
20995
Providing and fixing s. s. tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm.
17
427
7267.5
Providing and fixing Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm
34
213
7267.5
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
6
792
4756.62
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
6
191
1147.86
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.
Two track four panels sliding windows with aluminium channel for roller track, zinc Alloy (zamak) powder coated handle on three panels along with multi-point locking sysytem, nylon rollers with SS 304 body.
Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre).
25.7
5176
133044.27
Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm).
25.7
1579
40605.23
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick
M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
303.46
137
41746.99
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
22.65
2448
55453.77
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
45.3
336
15260.66
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
34.65
490
16996.52
Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles & rails will be mitred cut, joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications & direction of Engg.-in-charge.
11.03
2645
29183.95
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
741.8
121
90232.55
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying
a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished seamless type tubes
7978.95
145
1160378.7
DOUBLE SKIN ROOF SHEETING Providing & fixing Top layer of LYSAGHT Trapezoidal TRIMDEK profile sheet of 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pans at nominal 200 mm centre to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.50 mm Total Coated Thickness (TCT), Hi-Tensile steel with min. 550 mpa yield strength, metallic hot dip coated with Aluminum-Zinc alloy (55% Aluminum, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides). Thereafter providing sub girt in 0.5 mm thickness in Z shape of 50 mm web and 20 mm flange over bottom skin sheet shall be Panel rib profile of LYSAGHT to be installed over purlins directly with self drilling & tapping screws. to make air gap of 50 mm for providing sandwich insulation of 50 mm thick rock wool pads having density of 48 kg/mtr cube with HDPE vapor liners on both top and bottom surface of Rock wool. Complete job with all hardware, accessories, material and labour.
195.66
2703
528941.37
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120
gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
Ridges plain (500 - 600mm)
17.76
375
6663.37
Gutter (600 mm over all girth)
35.51
925
32877.29
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
74.12
1187
88000.45
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)
765.02
278
213157.52
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
379.32
242
91871.3
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
29.53
290
8569.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including spacer and pointing in white cement mixed with pigment of matching shade complete.
272.5
893
243511.45
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick
14.82
1373
20349.05
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
4.85
1659
8048.77
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
9
1094
9853.47
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc complete.
Size of Tile 600x600 mm
1.25
1143
1429.86
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
Granite stone slab of colour black, Cherry/Ruby red
Area of slab over 0.50 sqm
12.84
3619
46480.03
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
194.71
3158
614954.54
Providing and installation of customised wall tiles/concrete with precise dimensions and robust material specifications of size 220X75mm size having flutes/grooves/undulation of desired finish and pattern including the cost of graphics illustrations as approved by Architect in charge. The other additives should be fine washed graded quartz, super plasticisers and integrated water proofing agents and others. The tiles should be applied on a rough plaster of 1:3 cement mortar 1:3 (1 cement: 3 coarse sand) and the fixing of tiles should be done by ‘Greyscale’ tile adhesive or equivalent as per manufacturer’s laying instruction. The installation should be meticulously carried out under the guidance and approval of the appointed Architect or Engineer-in-Charge, ensuring that all work is executed to the highest standards of quality and precision
54.72
2752
150597.65
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
884.14
136
120702.79
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
401.79
157
63318.09
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1285.93
109
141426.58
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
45.3
124
5627.17
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
10.78
120
1296.94
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) 40mm WhiteSandstone:
Red Sand Stone 40mm thick
119.3
5470
652668.83
White Sand Stone 40mm thick
86.04
5871
505161.49
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required
308.01
503
155079.96
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
1232.04
30
38119.32
Supplying, fabricating, transporting, hoisting and fixing in position good quality of 70 mm sandstone in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding. The carving and molding work shall be of very good quality. The stones to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architects
70 mm Red sandstone
59.65
11913
710610.45
70 mm White sandstone
64.53
12863
830049.39
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
Red sand stone
18.33
10523
192893.74
White sand stone
5.98
10567
63193.71
Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.
Red sand stone
0.91
66066
60120.47
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
60.48
528
31938.88
Brick edging 7cm wide 11.4cm. deep to plinth protection with bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)
97.21
41
4073.1
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction
, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks)
266.57
1071
285584.44
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
256.17
291
74799.08
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary
holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a
structural designer, dully approved by Engineer-in-charge
The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor
shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as
specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places.
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately.
The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or any other accreditation body which operates in accordance with ISO/ IEC 17011 and accredits labs as per ISO/IEC 17025
1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr 2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml
4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site.
6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml
39.41
2474
97505.07
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge.
The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
39.41
2620
103287.7
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in- Charge.
5.91
2587
15292.6
Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge.
6
3753
22521.36
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 200 mm
1
5045
5045.49
Providing & fixing PVC waste pipe for sink including PVC waste fittings Complete Flexible Pipe 32mm Dia
3
84
252.78
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore
2
563
1126.16
Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge.
2
52
105.44
SUB HEAD-II-WATER SUPPLY
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc. For Internal Toilet 15 mm nominal outer dia Pipes
4
350
1403.36
20 mm nominal outer dia Pipes
22
378
8335.58
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall 20 mm nominal bore
17
236
4013.7
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
For vertical pipe connection with terrace ringmain
20 mm nominal bore
1
380
380.54
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
1
642
642.68
SUB HEAD : III - ROOFING
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm dia (for rain water)
48
265
12767.04
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Single Push Fit Coupler
110 mm dia
16
89
1438.88
Single tee with door
110x110x110 mm
4
165
660.08
Plain bend 87.5 deg
110 mm dia
8
105
847.68
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
110 mm dia
24
261
6280.32
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
4
210
840.8
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m²
36
725
26124.12
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.All kind of soil Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.
20
248
4963.8
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
100mm dia SW pipe
20
679
13598.6
Providing and fixing PTMT grating of approved quality and colour.
Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony)
1
138
138.81
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150 x 100mm size P-type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
1927
1927
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:
100 mm diameter
2
312
625.28
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.All kind of soil
Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.
10
248
2481.9
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
100mm dia SW pipe
10
679
6799.3
SUB HEAD : IV - INTERNAL DRAINAGE
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes.
Internal Toilet (Soil & Waste Pipe)
75 mm
22
479
10554.5
110 mm
3
679
2037.75
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Bend without door (45°) 75mm
1
128
128.25
Bend without door (87.5°) 75mm bend
1
142
142.5
Y' Fitting without door 75mm
1
218
218.5
Single Tee without door 75mm
1
213
213.75
Single Tee with door 75mm
1
242
242.25
110 mm
1
403
403.75
Bend with door (87.5°) 75mm
1
175
175.75
110 mm
1
294
294.5
Clean Out Plug (COP) 75mm
1
133
133
110 mm
1
190
190
Reduced Tee with door 110mm x 75mm
1
351
351.5
Coupler 75mm
7
133
931
110mm
1
209
209
Providing, fixing, jointing and testing , of PVC Nahani Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge. 110mm x 75mm (Toilet & Kitchen)
1
1092
1092.5
SUB HEAD-I-SANITARY INSTALLATIONS
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
7
4592
32144
Providing & fixing toilet paper holder C.P. brass
7
566
3965.01
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
7
246
1722.49
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with
a single 15 mm C.P. brass pillar tap
8
1569
12552.64
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
8
729
5834.4
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
8
118
949.2
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
8
163
1307.76
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
8
1133
9065.92
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern & jet)
15 mm nominal bore
30
404
12142.5
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length
15 mm nominal bore
23
68
1584.47
Providing & fixing PVC waste pipe for sink including PVC waste fittings Complete Flexible Pipe 32mm Dia
2
84
168.52
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15mm nominal bore
7
357
2500.26
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore
2
563
1126.16
Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge.
9
52
474.48
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (Including C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 50 mm dia)
4
5770
23083.36
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
Granite Stone of approved shade
1.7
2855
4854.61
SUB HEAD-II-WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. For Internal Toilet 15 mm nominal outer dia Pipes
5
350
1754.2
20 mm nominal outer dia Pipes
34
378
12882.26
25 mm nominal outer dia Pipes
11
442
4862.77
32 mm nominal outer dia Pipes
7
521
3647.28
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall 32 mm nominal bore
33
365
12064.8
Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on Wall Terrace loop & Tank Filling Pipe 32 mm nominal bore
22
470
10341.98
40 mm nominal bore
33
572
18882.93
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 32mm diameter pipe
22
15
344.3
40mm diameter pipe
33
17
587.4
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 32mm diameter pipe
7
344
2412.69
40mm diameter pipe
11
444
4894.12
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : For vertical pipe connection with terrace ringmain 32mm nominal bore
2
486
972.02
40mm nominal bore
1
582
582.22
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
3
642
1928.04
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball. 40 mm nominal bore, 206 mm long, weighing not less than 690 gms
1
519
519.56
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2500
7
19375
SUB HEAD : III - ROOFING Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm dia (for rain water)
11
265
2925.78
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single Push Fit Coupler 110 mm dia
4
89
359.72
Single tee with door 110x110x110 mm
1
165
165.02
Plain bend 87.5 deg 110 mm dia
2
105
211.92
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm dia
6
261
1570.08
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
210
210.2
0.80 mm thick with zinc coating not less than 275 gm/m²
36
725
26124.12
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.
All kind of soil Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.
5
248
1240.95
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
100mm dia SW pipe
5
679
3399.65
150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony)
14
138
1943.34
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
150 x 100mm size P-type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
1927
3854
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:
100 mm diameter
4
312
1250.56
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m.
All kind of soil Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.
10
248
2481.9
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100mm dia SW pipe
10
679
6799.3
Providing and fixing Jaquar Make Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook of quality and make as approved by Engineer - in - charge.
7
1548
10839.5
Providing and fixing of Kent Elite Plus Water Purifier (RO+UV+UF+TDS Control) with flow rate (50L/hr) including all its accessories, complete in all respect including testing etc.
1
39301
39301.5
Providing and fixing of Water Cooler (Voltas Make) including all its accessories, complete in all respect including testing etc.
1
27806
27806.5
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes.
Internal Toilet (Soil & Waste Pipe)
75 mm
50
479
23987.5
110 mm
45
679
30566.25
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.
Bend without door (45°)
75mm
14
128
1795.5
110mm
7
209
1463
Bend without door (87.5°) 75mm bend
14
142
1995
110mm
14
247
3458
Y' Fitting without door 75mm
14
218
3059
110mm
7
394
2759.75
Single Tee without door 75mm
14
213
2992.5
110 mm
7
346
2427.25
Single Tee with door75mm
3
242
726.75
110 mm
3
403
1211.25
Bend with door (87.5°) 75mm
3
175
527.25
110 mm
3
294
883.5
Clean Out Plug (COP) 75mm
3
133
399
110 mm
3
190
570
Reduced 'Y' Fitting without door110mm x 75mm
2
318
636.5
Reduced Tee with door 110mm x 75mm
3
351
1054.5
Coupler 75mm
17
133
2261
110mm
15
209
3135
Providing, fixing, jointing and testing, unplasticized PVC pipes - 10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. For Wash basin & Urinal 32mm dia. Pipe
25
175
4393.75
50mm dia. pipe
11
327
3605.25
Elbow (45°) 32mm
4
42
171
50mm
2
66
133
Elbow (90°) 32mm
8
38
304
50mm
4
80
323
T fitting 32mm
7
42
299.25
50mm
3
95
285
Coupler 32mm
8
33
266
50mm
4
57
228
Providing, fixing, jointing and testing , of PVC Multi Floor Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge. 110mm x 75mm x 50mm/40mm (Toilet)
6
1159
6954
Providing, fixing, jointing and testing , of PVC Nahani Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge. 110mm x 75mm (Toilet & Kitchen)
8
1092
8740
SUB-HEAD - I : INTERNAL WIRING Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group - C
83
1079
89606.8
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
90
171
15432.3
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
328
202
66380.64
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
288
245
70790.4
2 X 6 sq. mm + 1 X 4 sq. mm earth wire
180
323
58152.6
4 x 10 sq.mm + 2 x 6 sq.mm. earth wire
108
739
79876.8
4 x 16 sq.mm + 2 x 6 sq.mm. earth wire
54
1004
54244.62
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 amps modular switch, connection etc. as required.
6
351
2106.18
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
12
431
5175
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
6
535
3210.12
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required
1
271
271.56
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
14
29
412.16
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
17
64
1088.51
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
69
87
6042.33
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
1
162
162.38
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required Upto 450 mm sweep
4
331
1324.64
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes.
4
152
609.36
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan
1
2009
2009.07
SUBHEAD- III: DISTRIBUTION BOARD
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required125 A,36KA,FPMCCB
1
6041
6041.18
4 Way Double door
3
3010
9031.98
Supplying and fixing following way surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note : Vertical type MCB TP DB is normally used where 3 phase outlet are required.) 4 way (4 + 12), Double door
1
5528
5528.24
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
25
188
4710
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
11
9
105.27
SUBHEAD: - IV - EARTHING Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each
1
197
197.96
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required.
1
5498
5498.81
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
20
105
2119.4
Providing and laying earth connection from earth electrode
with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth
electrode including connection with G.I. thimble excavation and
re-filling as required.
15
211
3168.15
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
30
179
5386.8
SUB-HEAD -V : TELEPHONE & LAN SYSTEM Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm dia PVC conduit
30
106
3201.3
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required 1 or 2 Module (75mmX75mm)
1
219
219.3
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required TV antenna socket outlet
1
108
108.92
Providing, laying, connecting and testing of unarmoured TV cable RG-6 PVC insulated cable along wall or ceiling or through existing pipe.
30
34
1037.7
SUB-HEAD -VI : L.T. CABLES
Laying of one number PVC insulated and PVC sheathed / XLPE power Cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Up to 35 sq.mm.
60
284
17088
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required Upto 35 sq. mm (clamped with 1mm thick saddle
100
40
4048
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
20
33
662.4
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 2 X 6 sq. mm (19mm)
8
176
1412.96
3½ X 50 sq. mm (35mm)
2
303
607.88
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.
10
492
4923.3
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.
2
852
1705.86
Supply of LED 4ft 40W LED Tube light with a nominal system lumen output of 4000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 3000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 42W (including driver).
6
3418
20508.6
Supply of LED 4ft Batten reccess/suspended linear connedcted with a nominal system lumen output of 4000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 4000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 42W (special) ( Linear)
17
13830
235111.7
Supply of Recess mounting round 6 Watt 10 Watt , LED Down Lighter, suitable for 24Hr Continuous Operation, 660-1100 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
14
1192
16691.5
Supply of Moroccan Lamp Pendant Brass Light;Dimensions Diameter:
- H 29.9” x W 14.9”
- H 78cm x W 38cm
- Chain height: 13.7” / 35cm 24W complete in all respect.
9
49672
447053.85
Supplying of LED mirror light luminaire with 10W watt complete with electronic ballast, lamp including connection etc. complete as required.
7
1068
7481.25
Supply of LED Flood light 50 Watt , suitable for 24Hr Continuous Operation, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, CCT 3000K, complete in all respect,
4
5047
20189.4
Supplying of 9 Watt 4 Star LED Wall Light Blub complete in all respect.
12
222
2667.6
Supplying of 9 Watt Decorative Moroccan Wall Sconce Lights; Height 30 cm x Width 12.5 cm Height 11.81 inch x Width 4.92 inch; - Materials : Copper / Brass - Color : Silver / Brass in desired finish complete in all respect as approved by Architect incharge
12
15294
183528.6
Supplying, erection, connecting, testing and commissioning of 400 mm Wall Fan complete in all respect.
8
3334
26676
Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required.300mm EXHAUST FAN
4
2280
9123.8
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps TP MCB
2
1840
3680.3
63 amps TP MCB
1
1924
1924.7
40 amps 4P MCB
2
2429
4858.3
63 amps 4P MCB
1
2525
2525.1
Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment 3.5 x 50 sq.mm
100
665
66595
3 x 6 sq.mm,
100
201
20140
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
138.12
183
25338.11
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
30.59
493
15102.28
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
44.92
1496
67234.91
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
42.02
4800
201735.08
Providing and laying in position ready mixed cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland
Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting
of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage
for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following
grades of concrete.:
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in
design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the
cost of extra cement.
All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
49.76
6698
333328.31
Concrete of M25 grade with minimum cement content of 330 kg /cum
50.18
6949
348719.39
Centering and shuttering including strutting, propping etc. and removal of form for
Foundations, footings, bases of columns, etc. for mass concrete
56.44
276
15598.89
Suspended floors, roofs, landings, balconies and access platform
115.25
653
75315.88
Lintels, beams, plinth beams, girders, bressumers and cantilevers
356.73
519
185142.87
Columns, Pillars, Piers, Abutments, Posts and Struts
259.16
677
175580.9
Edges of slabs and breaks in floors and walls Under 20 cm wide
28.52
146
4191.87
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
Suspended floors, roofs, landings, beams and balconies (Plan area to be measured)G.F.
317.43
270
85975.92
Brick Work with common burnt clay ( non modular) bricks of class - 150 in foundation and plinth in: Cement mortar 1:6 ( 1 cement : 6 coarse sand)
22.01
5026
110636.35
Brick Work with common burnt clay ( non modular) bricks of class - 150 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 ( 1 cement : 6 coarse sand)
64.9
6417
416505.49
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
574.36
792
454910.35
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7Kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
28.66
103
2951.98
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical
emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
328.12
218
71700.78
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration
201.57
37
7593.14
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
146.83
7601
1116056.3
Providing and fixing s.s. door bolts, ISI marked with nuts and screws etc. complete : 250mm x 16mm .
14
617
8645
Providing and fixing s. s. tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm.
7
427
2992.5
Providing and fixing Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm
14
213
2992.5
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
6
792
4756.62
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
6
191
1147.86
Two track four panels sliding windows with aluminium channel for roller track, zinc Alloy (zamak) powder coated handle on three panels along with multi-point locking sysytem, nylon rollers with SS 304 body.
Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre).
16.56
5176
85728.14
Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm).
16.56
1579
26164.3
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick
M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
60.8
137
8364.26
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
5.04
2448
12339.38
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
10.08
336
3395.75
Providing and fixing Acoustic Door with all the necessary fitting sn and fixtures in design and specification approved by Architect in charge
6.48
53200
344736
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
9.9
490
4856.15
Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles & rails will be mitred cut, joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications & direction of Engg.-in-charge.
3.15
2645
8334.49
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
334
121
40627.76
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
Using M.S. angels 40x40x6 mm for diagonal braces
2.1
4090
8590.6
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying
a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished seamless type tubes
8833.65
145
1284677.72
DOUBLE SKIN ROOF SHEETING Providing & fixing Top layer of LYSAGHT Trapezoidal TRIMDEK profile sheet of 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle square fluting in the five pans at nominal 200 mm centre to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.50 mm Total Coated Thickness (TCT), Hi-Tensile steel with min. 550 mpa yield strength, metallic hot dip coated with Aluminum-Zinc alloy (55% Aluminum, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides). Thereafter providing sub girt in 0.5 mm thickness in Z shape of 50 mm web and 20 mm flange over bottom skin sheet shall be Panel rib profile of LYSAGHT to be installed over purlins directly with self drilling & tapping screws. to make air gap of 50 mm for providing sandwich insulation of 50 mm thick rock wool pads having density of 48 kg/mtr cube with HDPE vapor liners on both top and bottom surface of Rock wool. Complete job with all hardware, accessories, material and labour.
218.74
2703
591335.15
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120
gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)
19.6
375
7353.72
Gutter (600 mm over all girth)
39.2
925
36293.71
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
70.91
1187
84189.32
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)
564.47
278
157278.28
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
468.59
242
113492.5
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
29.53
290
8569.31
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including spacer and pointing in white cement mixed with pigment of matching shade complete.
32.13
893
28712.01
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
29.57
1094
32374.12
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc complete.
Size of Tile 600x600 mm
6.4
1143
7320.9
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
Granite stone slab of colour black, Cherry/Ruby red
Area of slab over 0.50 sqm
1.08
3619
3909.54
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
183.66
3158
580055.22
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
687.33
136
93834.29
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
490.5
157
77297.9
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1177.83
109
129537.74
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
33.6
124
4173.79
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
2.16
120
259.87
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) 40mm WhiteSandstone:
Red Sand Stone 40mm thick
119.3
5470
652668.83
White Sand Stone 40mm thick
86.04
5871
505161.49
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required
308.01
503
155079.96
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
1232.04
30
38119.32
Supplying, fabricating, transporting, hoisting and fixing in position good quality of 70 mm sandstone in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding. The carving and molding work shall be of very good quality. The stones to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architects
70 mm Red sandstone
59.65
11913
710610.45
70 mm White sandstone
64.53
12863
830049.39
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
Red sand stone
18.33
10523
192893.74
White sand stone
5.98
10567
63193.71
Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.
Red sand stone
0.91
66066
60120.47
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
56.21
528
29683.94
Brick edging 7cm wide 11.4cm. deep to plinth protection with bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand)
90.08
41
3774.35
, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks)
46.33
1071
49634.72
Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture, including providing and fixing required fittings, all complete as per direction of Engineer-in-charge
33.65
4864
163673.6
SUB HEAD-I-SANITARY INSTALLATIONS
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
2
4592
9184
Providing & fixing toilet paper holder C.P. brass
2
566
1132.86
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
2
246
492.14
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Wash basin size 630x450 mm with
a single 15 mm C.P. brass pillar tap
2
1569
3138.16
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
2
729
1458.6
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
2
118
237.3
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
2
163
326.94
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
1133
2266.48
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern & jet)
15 mm nominal bore
8
404
3238
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm length
15 mm nominal bore
6
68
413.34
Providing & fixing PVC waste pipe for sink including PVC waste fittings Complete Flexible Pipe
32mm Dia
2
84
168.52
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15mm nominal bore
2
357
714.36
Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge.
2
52
105.44
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (Including C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 50 mm dia)
1
5770
5770.84
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade
0.4
2855
1142.26
SUB HEAD-II-WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.
For Internal Toilet 15 mm nominal outer dia Pipes
1
350
350.84
20 mm nominal outer dia Pipes
29
378
10987.81
25 mm nominal outer dia Pipes
2
442
884.14
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall 20 mm nominal bore
17
236
4013.7
25 mm nominal bore
17
283
4811
20 mm nominal bore
11
308
3390.2
25 mm nominal bore
11
388
4277.02
Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on Wall
Terrace loop & Tank Filling Pipe
40 mm nominal bore
33
572
18882.93
20mm diameter pipe
11
10
111.98
25mm diameter pipe
11
12
142.23
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
40mm diameter pipe
33
17
587.4
20mm diameter pipe
4
244
977.68
25mm diameter pipe
4
309
1238.28
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 40mm diameter pipe
11
444
4894.12
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
For vertical pipe connection with terrace ringmain
20 mm nominal bore
1
380
380.54
25mm nominal bore
1
438
438.65
40mm nominal bore
1
582
582.22
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore
3
642
1928.04
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball.
40 mm nominal bore, 206 mm long, weighing not less than 690 gms
1
519
519.56
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2500
7
19375
SUB HEAD : III - ROOFING
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm dia (for rain water)
48
265
12767.04
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single Push Fit Coupler110 mm dia
16
89
1438.88
Single tee with door110x110x110 mm
4
165
660.08
Plain bend 87.5 deg110 mm dia
8
105
847.68
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm dia
24
261
6280.32
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
4
210
840.8
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m²
36
725
26124.12
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. All kind of soilPipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.
20
248
4963.8
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
100mm dia SW pipe
20
679
13598.6
150 mm nominal size square 100 mm diameter of the inner hinged round grating (including balcony)
5
138
694.05
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
1927
3854
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete:100 mm diameter
4
312
1250.56
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. All kind of soilPipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia.
10
248
2481.9
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:100mm dia SW pipe
10
679
6799.3
Providing and fixing Jaquar Make Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook of quality and make as approved by Engineer - in - charge.
2
1548
3097
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes.Internal Toilet (Soil & Waste Pipe)75 mm
22
479
10554.5
110 mm
20
679
13585
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion.Bend without door (45°)75mm
5
128
641.25
110mm
2
209
418
Bend without door (87.5°)75mm bend
5
142
712.5
110mm
4
247
988
Y' Fitting without door75mm
5
218
1092.5
110mm
2
394
788.5
Single Tee without door75mm
5
213
1068.75
110 mm
2
346
693.5
Single Tee with door75mm
3
242
726.75
110 mm
3
403
1211.25
Bend with door (87.5°)75mm
3
175
527.25
110 mm
3
294
883.5
Clean Out Plug (COP)75mm
3
133
399
110 mm
3
190
570
Reduced 'Y' Fitting without door110mm x 75mm
1
318
318.25
Reduced Tee with door110mm x 75mm
3
351
1054.5
Coupler 75mm
7
133
931
110mm
7
209
1463
Providing, fixing, jointing and testing, unplasticized PVC pipes - 10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete, for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. For Wash basin & Urinal 32mm dia. Pipe
6
175
1054.5
50mm dia. pipe
3
327
983.25
Elbow (45°) 32mm
2
42
85.5
50mm
1
66
66.5
Elbow (90°)32mm
2
38
76
50mm
1
80
80.75
T fitting 32mm
1
42
42.75
Coupler 32mm
2
33
66.5
50mm
1
57
57
Providing, fixing, jointing and testing , of PVC Multi Floor Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge. 110mm x 75mm x 50mm/40mm (Toilet)
3
1159
3477
Providing, fixing, jointing and testing , of PVC Nahani Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge.110mm x 75mm (Toilet & Kitchen)
2
1092
2185
SUB-HEAD - I : INTERNAL WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group - C
93
1079
100402.8
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
90
171
15432.3
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
372
202
75285.36
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
240
245
58992
2 X 6 sq. mm + 1 X 4 sq. mm earth wire
180
323
58152.6
4 x 6 sq.mm + 2 x 6 sq.mm. earth wire
54
554
29964.06
4 x 10 sq.mm + 2 x 6 sq.mm. earth wire
54
739
39938.4
4 x 16 sq.mm + 2 x 6 sq.mm. earth wire
54
1004
54244.62
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 amps modular switch, connection etc. as required.
6
351
2106.18
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
10
431
4312.5
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
6
535
3210.12
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required
2
271
543.12
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
16
29
471.04
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
4
64
256.12
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
73
87
6392.61
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
2
162
324.76
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as requiredUpto 450 mm sweep
2
331
662.32
Extra for fixing the Louvers/ shutters complete with frame for exhaust fans of all sizes.
2
152
304.68
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan
2
2009
4018.14
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required 125 A,36KA,FPMCCB
1
6041
6041.18
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 Way Double door
2
3010
6021.32
6 way Double door
1
3660
3660.48
Supplying and fixing following way surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.(Note : Vertical type MCB TP DB is normally used where 3 phase outlet are required.) 4 way (4 + 12), Double door
1
5528
5528.24
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
28
188
5275.2
Triple pole
1
741
741.07
Triple pole and neutral
1
903
903.71
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
14
9
133.98
SUBHEAD: - IV : EARTHINGProviding and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each
1
197
197.96
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required.
1
5498
5498.81
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
35
105
3708.95
Providing and laying earth connection from earth electrode
with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth
electrode including connection with G.I. thimble excavation and
re-filling as required.
20
211
4224.2
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
30
179
5386.8
Laying of one number PVC insulated and PVC sheathed / XLPE power Cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Up to 35 sq.mm.
60
284
17088
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as requiredUp to 35 sq.mm.
20
27
544.6
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required Upto 35 sq. mm (clamped with 1mm thick saddle
100
40
4048
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
20
33
662.4
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.2 X 6 sq. mm (19mm)
8
176
1412.96
3½ X 50 sq. mm (35mm)
2
303
607.88
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm wide x 50 mm depth x 1.6 mm thickness.
10
492
4923.3
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm wide x 50 mm depth x 1.6 mm thickness.
2
852
1705.86
Supply of LED 4ft Batten recess/suspended linear connedcted with a nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 4000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 21W (special)
40
5722
228912
Supply of Recess mounting round 6 Watt 10 Watt , LED Down Lighter, suitable for 24Hr Continuous Operation, 660-1100 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
6
1192
7153.5
Supply of Recess mounting round 20Watt to 24 Watt , suitable for 24Hr Continuous Operation, 100lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
9
2172
19553.85
Supplying of LED mirror light luminaire with 10W watt complete with electronic ballast, lamp including connection etc. complete as required.
2
1068
2137.5
Supply of LED Flood light 50 Watt , suitable for 24Hr Continuous Operation, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, CCT 3000K, complete in all respect,
4
5047
20189.4
Supplying of 9 Watt 4 Star LED Wall Light Blub complete in all respect.
12
222
2667.6
Supplying of 9 Watt Decorative LED Wall Light complete in all respect.
12
1827
21933.6
Supplying, erection, connecting, testing and commissioning of 400 mm Wall Fan complete in all respect.
16
3334
53352
Supplying of following size exhaust fan complete with gravity louver and connection with 3 core flexible wire as required. 300mm EXHAUST FAN
2
2280
4561.9
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps TP MCB
1
1840
1840.15
63 amps TP MCB
1
1924
1924.7
40 amps 4P MCB
1
2429
2429.15
63 amps 4P MCB
1
2525
2525.1
Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment 3.5 x 50 sq.mm
100
665
66595
3 x 6 sq.mm,
100
201
20140
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
313.98
92
29153.04
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground
within 50 metres lead.
613.7
38
23639.72
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
189.9
51
9823.53
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
39.78
3
158.32
Disposal of Malba (up to 5 kms).
39.22
348
13657.58
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
6.95
4800
33366.46
Providing and fixing s.s. door bolts, ISI marked with nuts and screws etc. complete : 250mm x 16mm .
4
617
2470
Providing and fixing s. s. tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm.
8
427
3420
Providing and fixing Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm
8
213
1710
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
4
792
3171.08
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
4
191
765.24
Two track four panels sliding windows with aluminium channel for roller track, zinc Alloy (zamak) powder coated handle on three panels along with multi-point locking sysytem, nylon rollers with SS 304 body.
Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre).
23.17
5176
119946.92
Float glass panes 4 mm thick glass pane (weight not less than 10 kg/sqm).
24.66
1579
38962.06
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick
M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
197.18
137
27126.05
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part |!) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
16.61
1686
28009.11
15 mm cement plaster on rough side of single or half brick wall of mix: (1) 1 cement : 6 fine sand
613.7
278
170995.23
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground within 50 metres lead.
613.7
51
31335.52
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
30.69
109
3375.29
Extra for plastering done on moulding, cornices or architraves including neat finish to line and level: 13.24.2 in two coat
30.69
828
25430.96
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 meter height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 meter centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose.
(2) The payment will be made once only for execution of all items for such works.
668.85
238
159447.15
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied
@ 2.20kg/10 sqm
384.37
113
43506.84
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
353.64
136
48278.93
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
33.21
124
4125.35
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
53.82
120
6475.08
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
116.55
1094
127602.44
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc complete.
Size of Tile 600x600 mm
12.15
1143
13898.26
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
73.35
1200
88086.02
SUB-HEAD - I : INTERNAL WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group - C
29
1079
31308.4
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
100
171
17147
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
116
202
23476.08
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
144
245
35395.2
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
6
431
2587.5
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required
5
29
147.2
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
19
87
1663.83
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 Way Double door
1
3010
3010.66
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
8
188
1507.2
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
4
9
38.28
SUB-HEAD -IV : L.T. CABLES Laying of one number PVC insulated and PVC sheathed / XLPE power Cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Up to 35 sq.mm.
60
284
17088
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required Up to 35 sq.mm.
20
27
544.6
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required Upto 35 sq. mm (clamped with 1mm thick saddle
20
40
809.6
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 X 10 sq. mm (25mm)
2
197
395.92
Supply of LED 4ft Batten reccess/suspended linear connedcted with a nominal system lumen output of 4000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 25,000 burning hours at L70. The luminaire should have a color temperature of 4000K and CRI80. The luminaire shall meet IP20 rating with THD 10% and PF 0.9. The luminaire housing should made of extrusion Al with a PC diffuser. The total power consumption should not exceed 42W (special) ( Linear)
18
13830
248941.8
Supply of Recess mounting round 6 Watt 10 Watt , LED Down Lighter, suitable for 24Hr Continuous Operation, 660-1100 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, Avg Life Class 50000Hrs @L70, complete in all respect.
1
1192
1192.25
Supplying, erection, connecting, testing and commissioning of 400 mm Wall Fan complete in all respect.
10
3334
33345
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required 40 amps 4P MCB
1
2429
2429.15
Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment 4 x 10 sq.mm
100
291
29165
Providing, fabricating and fixing installation of artistically evolved and adaption of near front mural wall in metal/ stone/frp in required size, as per approved design and location by Architect in charge
13.5
18525
250087.5
Designing, supplying and installation and fabrication of; Brass polished/ PVD coated/ Powder coating; metal surface of thickness not less than 4MM, including the cost of precision cutting of the material, finishing, buffing etc in desired shade and finish by any suitable means. Also includes the cost of preparation of shop drawing and the cost of required necessary fittings and fixtures for fixing of the Sheet on the surface as per Drawing and design approved by the Architect in charge.
57.6
17818
1026328.32
Earth work in excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.5 m. & lead of 30 m. including filling, watering and ramming of excavated earth dressing of sides and ramming of bottoms filling of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth in 200 mm th. layers and getting out (removal of) the excavated surplus soil and disposal of surplus excavated soil as directed by engineer-in-charge up to a distance of 30 m from foundation trenches
14.38
183
2638.01
Providing and laying cement concrete in 1:4:8 (1 Cement : 4
coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. In Foundation and floors.
1.23
4800
5905.14
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit in Footing/Raft the proportion of 1:1.5:3 excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20.
3.34
8108
27083.39
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit in Column the proportion of 1:1.5:3 excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20.
1.6
8108
12974.08
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit in Beam the proportion of 1:1.5:3 excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-20.
1.49
8108
12082.11
Brick work in super-structure in 1:4 (1 Cement :4 Coarse sand ) above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work for wall of one brick thick etc all complete in direction of engineer in charge.
7.5
6585
49392.53
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. TMT Fe-500
9.33
7601
70917.42
12mm Cement plaster with cement mortar in proportion of
1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth.
48.66
242
11785.45
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - Exposed face machine cut and table rubbed with rough backing. 40 mm thick Red Sand Stone
47.82
5470
261614.61
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
57.39
503
28895.29
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing
adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2
coarse sand), including making the necessary chases.
287.3
30
8889.06
Supplying, designing, fabricating, transporting, hoisting and fixing in position mural works in good quality of 70 mm Red sandstone, and 18mm marble insertion and 6-10mm powder coated MS sheet in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding, etching, buffing and polishing. The carving and molding work shall be of very good quality. The work to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architect in charge.
40.13
30827
1237107.58
Centering and shuttering including strutting, propping etc. and removal of form for
Foundations, footings, bases of columns, etc. for mass concrete
13.38
276
3697.96
Columns, Pillars, Piers, Abutments, Posts and Struts
21.4
677
14498.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers
15.05
519
7810.95
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal
of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
5.1
183
935.6
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
71.55
4800
343506.54
Providing & fixing Cobble Stone Flooring (10X10X10)cm filling of joints in 1:3 Cement mortar with matching colour pigments all complete specification & direction of Engineer in charge.
816.19
1866
1523622.68
Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :
One face dressed
Red sand stone
20.4
48131
981891.78
Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.
6.09
183
1117.21
Excavating, supplying, stacking and filling of local earth (including royalty)
by mechanical transport upto a lead of 5km also including ramming
and watering of the earth in layers not exceeding 20 cm in foundation
trenches, plinth, sides of foundation etc. complete for all lift.
146.18
493
72169.07
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
105.58
4800
506882.19
40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar..
Red sand stone
97.46
1160
113128.64
40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar..
White sand stone
779.64
1204
939372.64
Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :
One face dressed
Red sand stone
24.36
48131
1172494.3
Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer I/C within a lead of 30 m.from foundation trenches.
0.57
183
104.57
Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation.
5.52
4800
26501.13
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
67.88
4882
331405.77
Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :
One face dressed
Red sand stone
0.85
48131
40912.16
Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded Stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
34.92
4800
167648.48
Providing and laying of EPDM Rubber Flooring 25mm thick including the cost of labour, Material and T & P etc. required for proper complition of work as directed by Engineer-in-charge. (MR)
397.96
1691
672950.36
Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors. (DSR -4.1.8)
7.6
4756
36149.25
Providing & fixing White River (Stone) Pebbles size of 2" to 2.5" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.
1652
34
56349.72
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
25.92
183
4755.02
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work up to plinth level. 1.4.8 (1 Cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size)
3.02
4800
14498.81
Concrete of M25 grade with minimum cement content of 330 kg /cum
7.8
6375
49726.72
Concrete of M25 grade with minimum cement content of 330 kg /cum
13.1
6949
91036.75
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
13.12
276
3626.11
Suspended floors, roofs, landings, balconies and access platform
18.05
653
11795.68
Lintels, beams, plinth beams, girders, bressumers and cantilevers
41.09
519
21325.71
Columns, Pillars, Piers, Abutments, Posts and Struts
105.84
677
71706.6
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
6.3
5026
31667.83
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:
Cement mortar 1:6 (1 cement : 6 coarse sand)
22.87
6417
146771.66
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .
Thermo-Mechanically Treated bars of grade Fe-500D or more.
34.99
7601
265959.34
Cinder/OBB Filling in sunken portion
3.33
1710
5694.3
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
17.99
432
7787.33
40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.
White sand stone
8.64
1204
10410.16
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) 40mm WhiteSandstone: White Sand Stone 40mm thick
84.55
5871
496413.34
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required
126.83
503
63857.64
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
507.31
30
15696.17
Supplying, fabricating, transporting, hoisting and fixing in position good quality of 70 mm White sandstone in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding. The carving and molding work shall be of very good quality. The stones to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architects
35.23
12863
453163.49
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
White sand stone
9.21
10567
97326.77
Providing & Fixing of Marble Inlay Work as per Direction of Architect-in-Charge.
49.16
10733
527639.2
Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. White sand stone
0.66
76091
50220.18
LANDSCAPE WORKS
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
499.78
72
36044.13
Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
199.91
476
95179.15
Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 16 mm
199.91
295
59053.41
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge..
399.82
33
13493.93
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
399.82
48
19327.3
Rough dressing the trenched ground including breaking the clods.
299.87
1
416.82
Fine dressing the ground
299.87
3
1025.56
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and the good earth shall be paid for separately).
999.55
12
12274.47
Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
1999.1
4
9035.93
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge With grass Turf
1999.1
80
161527.28
Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
99.96
421
42122.14
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 90 cm dia, and 90 cm deep
20
132
2642.8
Preparation of beds for hedging and shrubbery by excavating 60 cmdeep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).
22
205
4527.16
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cost of plant & water)
20
6
134.8
Providing and stacking of Acacia auriculiformis of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge.
10
60
600.2
Providing and stacking of Adansonia digitata (kalp vricksh) of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge.
10
244
2447
Providing and stacking of Bombax ceiba of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
10
64
646.4
Providing and stacking of Bottle palm of ht. 150-180 cm bottom girth 20-25 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge.
10
166
1662.1
Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags as per direction of the officer-in-charge
10
507
5078.7
Providing and stacking of Fishtail palm of ht. 270-300 cm bottom girth 40-50 cm well developed in big size HDPE bags as per direction of the officer-in-charge.
10
507
5078.7
Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35 - 40 cm well developed in big size HDPE bags as per direction of the officer-in-charge.
10
600
6002.1
Providing and stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur)
of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge.
10
600
6002.1
Providing and stacking of Pinus longifolia (Pinus) of height 90-105 cm. in cement pots of size 35 cm as per direction of the officer-in-charge.
10
507
5078.7
Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
10
50
507.9
SHRUBS Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge..
10
207
2077.7
Ground Covers Providing and Displaying plants Salvia red Hybrid dwarf variety having 15 to 23 cm ht., specimen 6 plants with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/ Nand as per direction of the officer-incharge.
10
50
501.9
Providing and Displaying plants Petunia hybrid well developed with fresh & healthy foliage in full bloom 6-8 plants in 35 cm Earthen Tray/Nand as per direction of the officer-in-charge.
5
298
1490.85
Providing and Displaying plants Coleus broad leaves having 3 to 4 branches equal well developed with fresh & healthy foliage in different colour in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
5
50
250.95
Providing and Displaying Acalypha plant Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge.
5
28
141.95
Providing and Displaying of Setcreasea purpurea plant full of variegated leaves in 20 cm size of Earthen Pot/Plastic Pot as per direction of the officer-in-charge
5
18
92.35
Providing and Displaying of Asparagus marrie plant, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
10
50
507.9
TREES Supply and stacking of Plumeria alba plant of height 120-135 cm. with 2-3 branches in bags of size 30 cm as per direction of the officer-in-charge.
5
110
554.05
Supply and stacking of Plumeria rubra plant of height 120-150 cm. with 3- 4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge
5
369
1846.8
Supply and stacking of Tabebuia sp. plant of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge.
5
78
392.45
Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge
5
55
277
Supply and stacking of Cassia fistula (Amaltash) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
5
60
300.1
Supply and stacking of Michelia champa (Golden Champa)plant of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-incharge.
5
83
415.55
SHRUBS Supply and stacking of plant Euphorbia caracasana (bronze colour leaves) of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge.
5
96
484.8
Supply and stacking of plant Euphorbia pulcherrima (dark red) well branched (poinsettia Red Hegg) of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
5
101
507.85
Supply and stacking of Callistemon lanceolatus plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in - charge.
5
60
300.1
Supply and stacking of plant Ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge.
5
207
1038.85
Providing and Displaying Ficus Starlight plant with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy
plant,in 35 cm Cement Pot as per direction of the officer-in-charge.
5
795
3975.25
Supply and stacking of plant Hamelia patens of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.
5
18
92.35
Supply and stacking of plant Tabernaemontana coronaria (Chandni single) of height 90-105 cm,bushy in big size HDPE bag as per direction of the officer-in-charge.
5
73
369.35
Providing and stacking of Murraya Koenigii spreng (Kadipatta/meetha neem) of ht 45-60 cm
well developed in earthen pots of size 20 cm. per direction of the officer-in-charge.
5
23
115.45
PLANTS
Alstonia scholaris of plants height 150-165 cm. in bag of plants size 25 cm
10
60
600.2
Ficus benjamina (green) of plants height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags
10
166
1662.1
Mimusops elengi (Maulsri) of plants height 180-195 cm., well developed with thick stem in big in big size HDPE bag
5
115
577.15
SHADE TREES Supply and stacking of Eugenia jambolana (Jamun) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
5
69
346.3
Supply and stacking of Ficus infectoria (Pilkhan) plant of height 150-165 cm. in big polybag of size 25 cm as per direction of the officer-in-charge.
5
60
300.1
Supply and stacking of Ficus retusa plant well branched of height 120-135 cm. in big poly bags of size of 30 cm as per direction of the officer-incharge
5
110
554.05
Stone Benches {MR}
Providing & fixing of red Sandstone/MS bench with Ornamentetion on armrest (size 1050mm length and 450mm and height 450 mm) including foundation & support with all necessary T&P etc all complete as per design of direction in engineer/ Architect in charge
35
15390
538650
DustBins(MR) Providing & fixing of SS Dustbin size 487 x 399 x 1138 fixing on a foundation with base plate and wrapped with red sandstone from all sides of 75mm with all complete as per design of direction in engineer/ Architect in charge.
18
17575
316350
COST OF SEWERAGE WORKS
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. up to 1.50 m depth Pipes 80 mm to 300 mm diameter
88
248
21840.72
Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered)
Depth not exceeding 1.5 meter
264
50
13405.92
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
88
392
34510.96
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design
150 mm. dia. RCC Pipes
88
523
46087.36
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).
With common burnt clay FPS (non modular) bricks of class designation 75
(i) For Sewer Line
5
9000
45001.85
Extra for depth for manholes: Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5
2.5
6219
15549.83
Inside size 90x120cms and 90cms deep including CI cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58kg).
With common burnt clay FPS (non modular) bricks of class designation 75
(i) For Sewer Line
3
18609
55829.85
Extra for depth for manholes: Size 90x120cm with With common burnt clay FPS (non modular) bricks of class designation 7.5
1.5
7460
11190.6
Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
14
390
5463.22
COST OF EXTERNAL WATER SUPPLY WORKS
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work)
65mm nominal bore.
44
631
27803.6
50mm nominal bore.
22
537
11817.08
40mm nominal bore.
66
434
28702.08
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
65mm nominal bore.
1
1227
1227.82
40mm nominal bore.
2
582
1164.44
40mm nominal bore.
2
671
1342.74
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
7655
22966.68
RAIN WATER HARVESTING RECHARGE PITS
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-incharge.
In all kind of soil upto 1.5m depth
22.59
125
2826.01
In all kind of soil upto 1.5m to 3.0m. depth
22.59
214
4844.65
In all kind of soil upto 3.0m to 4.5m. depth
22.59
303
6863.52
In all kind of soil upto 4.5 m to 6.0m. depth
10.54
393
4144.22
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
1.2
5552
6663.1
Class M-150 brick work in 1:4 cement coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
24.14
5194
125399.09
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
1.61
6375
10264.1
Suspended floors, roofs, landings, balconies and access platform.
10.75
653
7025.13
Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
1.9
7548
14341.49
12mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand)
46.16
309
14289.75
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:
With 20x20mm square bar
10
383
3838.9
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
M.D. -10- Circular shape 500mm internal diameter
1
826
826.42
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually.
15
581
8728.95
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia
15
569
8536.05
Supplying, filling, spreading & leveling stone boulders of size range
5 cm to 20 cm, in recharge pit, in the required thickness, for all leads
& lifts, all complete as per direction of Engineer-in-charge.
12.13
1064
12907.17
Supplying, filling, spreading & leveling gravels of size range 5 mm to
10 mm, in the recharge pit, over the existing layer of boulders, in
required thickness, for all leads & lifts, all complete as per direction
of Engineer-in-charge.
13.11
1084
14212.81
Supplying, filling, spreading & leveling coarse sand of size range 1.5
mm to 2 mm in recharge pit, in required thickness over gravel layer,
for all leads & lifts, all complete as per direction of Engineer -incharge.
13.11
1084
14212.81
Gravel packing in tubewell construction in accordance with IS: 4097,
including providing gravel fine/ medium/ coarse, in required grading
& sizes as per actual requirement, all complete as per direction of
Engineer-in-charge.
1
1426
1426.82
DESILTING CHAMBER
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-incharge. In all kind of soil upto 1.5m depth
10.05
125
1257.26
In all kind of soil upto 1.5m to 3.0m. depth
4.06
214
870.71
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
1.04
5552
5774.68
Class M-150 brick work in 1:4 cement coarse sand mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.
3.52
5194
18285.2
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
1.38
6375
8797.8
Suspended floors, roofs, landings, balconies and access platform.
7.27
653
4750.95
Providing & Fixing Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
1.63
7548
12303.49
15mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand)
17.6
309
5448.43
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:
With 20x20mm square bar
12
383
4606.68
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
M.D. -10- Circular shape 500mm internal diameter
2
826
1652.84
DRAINAGE NETWORK
Excavating trenches by mechinical / manual means of required width for pipes cables etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m. up to 1.50 m depth Pipes 80 mm to 300 mm diameter
176
248
43681.44
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
176
392
69021.92
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia.
176
523
92174.72
Constructing brick masonry INSPECTION chamber 60x60x75 cm with bricks of class designation 50 in cement mortar 1:4 (1 cement : 4 coarse sand) including CI cover with frame LIGHT WEIGHT complete as per design. With FPS bricks
15
6714
100716.3
Constructing brick masonary open surface drain with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 10cm thick bed concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) for filling haunches including 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: Drain 300 wide average. Depth 45 cm with R.C.C. slab
235
3098
728128.7
SEPTIC TANK & SOAK PIT
Size :- Length = 7.50 M. Width = 2.65M Total Depth =3.00M
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-incharge.In all kind of soil upto 1.5m depth
47.38
125
5927.24
In all kind of soil upto 1.5m to 3.0m. depth
45.09
214
9670
In all kind of soil upto 3.0m to 4.5m. depth
12.02
303
3652.04
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 40mm nominal size)
4.68
5552
25986.07
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
19.51
5194
101347.82
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
3.98
6375
25373.38
Suspended floors, roofs, landings, balconies and access platform.
26.52
653
17330.82
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
3.12
7548
23550.23
12mm cement plaster on rough side of mix 1:3 (1 cement : 3 coarse sand)
82.6
309
25570.48
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
12
383
4606.68
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
2
437
875.34
Providing & fixing 75mm dia vent pipes.
1
736
736.31
Providing & fixing of 75mm dia cast iron terminal guard.
1
240
240.12
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter
2
826
1652.84
M.D. -2.5- Circular shape 450mm internal diameter
4
824
3297.36
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks
2
18931
37863.22
Drilling of 200 mm dia bore hole.
50
570
28500
Supply of 125 mm dia MS pipe as per IS1239
40
1520
60800
Supply of 125 mm dia slotted MS pipe
10
1710
17100
Supply and fixing of nylon jali around the slotted pipes complete as required.
1
4750
4750
Providing and packing of coarse sand / pea gravel around the pipe.
1
5700
5700
Transport of boring tools other required equipements and installation at site.
1
47500
47500
Supply of submersible pump (3.7KW/5.0 HP) of make KSB (Cora) for 200 lit/min discharge at 50 meter head with control panel, support wire etc complete.
1
61750
61750
Providing 3 core PVC insulated submersible cable. (from pump panel to submersible pump)
40
95
3800
Providing and fixing 65 mm dia. G.I. pipe complete with fittings and clamps including cutting and making good the wall etc. (from submersible pump to ground level)
40
251
10070
Providing and fixing 65 mm dia. brass gate valve with CI wheel of approved quality.
1
1225
1225.5
Lowering of 125 mm dia MS pipe in bore hole including cutting, jointing etc complete.
50
142
7125
Supply and fixing of tube well accessories i.e. well cap, clips, clamps, etc. to complete the job in all respect.
1
9500
9500
Fixing, testing and commissioning for erection and lowering of submersible pump, 65 mm dia GI column pipe, 3 core submersible copper cable upto the control panel, supporting clamps, cable clips, pressure gauge, connection line and all other accessories required for the proper completion of the work.
1
14250
14250
Testing and development of tube well.
1
4750
4750
SUBHEAD: - II : EARTHING
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each
1
197
197.96
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required
20
5044
100894.8
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required.
4
5498
21995.24
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
72
105
7629.84
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
200
211
42242
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
60
179
10773.6
SUB-HEAD - III : L.T. CABLES Laying of one number PVC insulated and PVC sheathed / XLPE power Cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Up to 35 sq.mm.
1100
284
313280
Above 35 sq.mm. and up to 95 sq.mm.
190
298
56629.5
Above 95 sq.mm. and upto 185 sq.mm.
40
310
12422.4
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, rotective covering and refilling the trench etc as required
Up to 35 sq.mm.
800
197
158368
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required
Up to 35 sq.mm.
100
27
2723
Above 35 sq.mm. and up to 95 sq.mm.
20
41
839
Above 95 sq.mm. and upto 185 sq.mm.
10
56
566.7
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required
Upto 35 sq. mm (clamped with 1mm thick saddle
200
40
8096
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp
20
95
1913.4
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
60
33
1987.2
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
20
67
1354
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
10
84
846.3
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
2 X 6 sq. mm (19mm)
140
176
24726.8
3½ X 70 sq. mm (38mm)
4
344
1377.64
3½ X 185 sq. mm (57mm)
2
643
1287.86
4 X 16 sq. mm (28mm)
2
227
454.8
Providing, laying and fixing following dia G.I. pipe (medium
class) in ground complete with G.I. fittings including trenching
(75 cm deep)and re-filling etc as required
100 mm dia
10
1767
17670
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
100mm dia
30
487
14615.4
150 mm dia
10
532
5328.1
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
90 mm dia (OD-90 mm & ID-76 mm nominal)
10
213
2134.2
SUBHEAD - IV : Miscellaneous
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5
5
13906
69532.45
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Double pole
21
482
10137.96
Supply, Installation, Testing and Commissioning of LED RGB/RGBW flood lighting luminaire for facade lighting with Die-cast aluminium housing, powder coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX/ Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270V AC, 50Hz with power factor0.9. Fixture shall be suitable to operate at an ambient temperature range of-10°C to +50°C and shall be IP65 and IK06 rated. Life times hall beat least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.
45W /40W
10
27405
274057.3
Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.
1 output per phase and suitable for single phase supply
16
3229
51679.36
Erection of metallic pole of following length in cement concrete
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40
mm nominal size) foundation including excavation and refilling
etc. as required.
Above 6.5 metre and upto 8.0 metre
21
4464
93746.1
Supplying and embedding following dia G.I. pipe (medium class)
in pole collar/ foundation (during casting) for cable entry
including bending the pipe to the required shape complete as
required
32 mm dia
30
386
11590.8
SUBHEAD- I : M.V. PANELS
Supply & Erection of factory fabricated & wired metal clad dust and vermin proof mounting, M.S Channel Base with botom and top cable entreis Electrical control panel with TPN ACB (65KA, 4 Pole Elect draw out Micor Processer Release IPR2) and TPN MCCB's (four Pole 36 KA with thermal magnatic release) switches and instrument chamber etc. complete in all respect. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, instrument fuses current transformer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches enty boxes shall be complete with suitable cable end boxes reverse. The job includes the grounting of the board as per directions of Engineer-in-charge. All out goings of 100 Amp. and above will be provided with Amp. Metre, curent transformer and selector switches etc. and insurment fuse The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubical type switch board shall be of cat A & B only.
FEEDER PANEL -1
Incoming :
One (1) No 250 Amp. 4P MCCB of 25KA Breaking capacity Metering :
One (1) No. Sets Multifunction Meter each incoming
One (1) No. of Phase Indication Lamp each incoming
Bus Bar :
One (1) No. 300 Amp.TPN aluminimum bus bar of suitable length.
Outgoing :
Phase indication lamps on each outgoing to be provided.
160 Amps FP MCCB of 25KA - 3 No
63 Amps FP MCCB of 25KA - 1 No
16 Amps DP MCB of 10KA - 12 No
2 No. SPACE & SPARE
Panel described as above
1
185762
185762.05
FEEDER PANEL -2
Incoming :
One (1) No 160 Amp. 4P MCCB of 25KA Breaking capacity Metering :
One (1) No. Sets Multifunction Meter each incoming
One (1) No. of Phase Indication Lamp each incoming
Bus Bar :
One (1) No. 200 Amp.TPN aluminimum bus bar of suitable length.
Outgoing :
Phase indication lamps on each outgoing to be provided.
125 Amps FP MCCB of 25KA - 2 No
16 Amps DP MCB of 10KA - 10 No2 No. SPACE & SPARE
Panel described as above
1
134993
134993.1
FEEDER PANEL -3
Incoming :One (1) No 160 Amp. 4P MCCB of 25KA Breaking capacity Metering :One (1) No. Sets Multifunction Meter each incoming One (1) No. of Phase Indication Lamp each incoming Bus Bar :One (1) No. 200 Amp.TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided. 125 Amps FP MCCB of 25KA - 2 No 16 Amps DP MCB of 10KA - 10 No 2 No. SPACE & SPARE
Panel described as above
1
134993
134993.1
Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment 3.5 x 185 sq.mm
60
2052
123177
3.5 x 70 sq.mm
250
900
225150
4 x 16 sq.mm
100
375
37525
3 x 6 sq.mm,
2160
201
435024
SUBHEAD - V : EXTERNAL LIGHTING
Supply ,Installation ,Testing And Commissioning Of Twinkle Lites Make/ or equivalent:Twinkle Lite-UDPL-1131/ HEather or equivalent 4500Mm Long Hybrid Decorative Pole With Casted Aluminium Base And Ripped Gi Pole Pipe With Decorative Post Top Lantern 'Concord' 1270Mm Long With Polycarbonate Diffuser In 60W Led Having Lumn Output Not Less Than 110Lmns/Watt With 10Kva Surge Protector as per design approved by Architect In-Charge ( Make- Twinkle Lite- /-Havells/Neri/Juvaas/Orient/ Thor)
21
80633
1693296.15
Supply And Fixing Of Twinkle Lites Make:Twinkle Lite-821 (BL-36); LAZORIN 150x150mm/or equivalent customized 800Mm-1000MM Long Made Out Of Extruded Aluminum Profile With Cast Aluminum Base With 36W Led, including the cost of casting of all graphics, illustrations etc. as per design approved by Architect in charge (Make- Twinkle Lite- Equivalent In :-Havells/Neri/Juvaas/Orient/ Thor)
65
29844
1939876.25
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
1433.55
17
24943.77
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting,
unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
17.2
182
3140.38
15 mm cement plaster on rough side of single or half brick wall of mix: 13.5.1 1:4 (1 cement: 4 coarse sand)
1433.55
284
408303.71
Extra for plastering done on moulding, cornices or architraves including neat finish to line and level 13.24.1 In one coat
143.36
493
70725.22
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
1576.91
181
286556.09
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
1433.55
154
221727.18
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
325.62
92
30233.82
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
581.97
51
30105.31
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
333.98
17
5921.47
Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
373.51
472
176621.67
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting,
unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
38.09
186
7085.88
Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors.
55.23
4800
265155.36
Providing & fixing Cobble Stone Flooring (10X10X10)cm filling of joints in 1:3 Cement mortar with matching colour pigments all complete specification & direction of Engineer in charge.
63.85
685
43739.8
40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.
RED/Pink sand stone
522.61
1160
606630.01
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - Exposed face machine cut and table rubbed with rough backing. 40 mm thick Red Sand Stone
20.52
5470
112261.23
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
24.62
503
12395.92
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing
adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2
coarse sand), including making the necessary chases.
123.22
30
3812.43
Supplying, fabricating, transporting, hoisting and fixing in position good quality of 70 mm White sandstone in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding. The carving and molding work shall be of very good quality. The stones to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as required and as approved by the Architects
8.21
12863
105605.23
Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
60.48
4653
281466.66
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
72.91
4882
355963.39
Providing & Fixing of Marble Inlay Work as per Direction of Architect-in-Charge.
153.39
10733
1646350.21
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Ground Floor
373.51
109
41078.63
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
Ground Floor
373.51
120
45041.57
Cost of Inlaying and insertion in Mural Work Cost of designing, supplying and insllation and fabrication of inlaying works of required material - granite,makrana white marble, mother of pearl, sandstone of any shade in the mural work , or Brass polished metal strip and PVD coated metal inlaying including the cost of etching and engraving the stone surface and precision cutting of the material and fixing with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete or approved make as per Drawing and design approved by the Architect in charge.
27.17
25564
694587.47
Finishing walls with artistic paint on exterior over painted surface including T&P and clomplete in all respect . Shade & design as per approved by architect - in -charge.
14.04
1995
28009.8
SUBHEAD- I : M.V. PANELS
SUBHEAD: - II : EARTHING
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each
1
197
197.96
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required
2
5044
10089.48
Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required.
1
5498
5498.81
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
15
105
1589.55
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
20
211
4224.2
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.
10
179
1795.6
SUB-HEAD - III : L.T. CABLES Laying of one number PVC insulated and PVC sheathed / XLPE power Cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Up to 35 sq.mm.
500
284
142400
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, rotective covering and refilling the trench etc as required
Up to 35 sq.mm.
400
197
79184
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required
Up to 35 sq.mm.
100
27
2723
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required
Upto 35 sq. mm (clamped with 1mm thick saddle
240
40
9715.2
Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.
2 X 6 sq. mm (19mm)
76
176
13423.12
4 X 10 sq. mm (25mm)
2
197
395.92
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
100mm dia
10
487
4871.8
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5
1
13906
13906.49
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Double pole
12
482
5793.12
Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.
1 output per phase and suitable for single phase supply
6
3229
19379.76
Erection of metallic pole of following length in cement concrete
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40
mm nominal size) foundation including excavation and refilling
etc. as required.
Above 6.5 metre and upto 8.0 metre
4
4464
17856.4
Supplying and embedding following dia G.I. pipe (medium class)
in pole collar/ foundation (during casting) for cable entry
including bending the pipe to the required shape complete as
required
32 mm dia
10
386
3863.6
SUBHEAD- I : M.V. PANELS
Supply & Erection of factory fabricated & wired metal clad dust and vermin proof mounting, M.S Channel Base with botom and top cable entreis Electrical control panel with TPN ACB (65KA, 4 Pole Elect draw out Micor Processer Release IPR2) and TPN MCCB's (four Pole 36 KA with thermal magnatic release) switches and instrument chamber etc. complete in all respect. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, instrument fuses current transformer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches enty boxes shall be complete with suitable cable end boxes reverse. The job includes the grounting of the board as per directions of Engineer-in-charge. All out goings of 100 Amp. and above will be provided with Amp. Metre, curent transformer and selector switches etc. and insurment fuse The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubical type switch board shall be of cat A & B only.
Panel described as above
1
81609
81609.75
Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment 4 x 10 sq.mm
100
291
29165
3 x 6 sq.mm,
1140
201
229596
SUBHEAD - V : EXTERNAL LIGHTING
Supply ,Installation ,Testing And Commissioning Of Twinkle Lites Make/ or equivalent:Twinkle Lite-UDPL-1131/ HEather or equivalent 4500Mm Long Hybrid Decorative Pole With Casted Aluminium Base And Ripped Gi Pole Pipe With Decorative Post Top Lantern 'Concord' 1270Mm Long With Polycarbonate Diffuser In 60W Led Having Lumn Output Not Less Than 110Lmns/Watt With 10Kva Surge Protector as per design approved by Architect In-Charge ( Make- Twinkle Lite- /-Havells/Neri/Juvaas/Orient/ Thor)
4
80633
322532.6
Supply of Static White/ RGB/ RGBWSurface/Wall mounted Narrow/ Medium/ Wide/ Elliptic beam Linear Wall Washer luminaires suitable for outdoor applications of Facade Lighting. Power consumption should be between 36W at steady state full intensity. Luminaire should be able to run on DC Voltage. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP66or higher. Operating Temperature : -10°C to +50°C, Operating Humidity : 10% -90%,.LEDs of CREE / LUMILED / OSRAM / NICHIA/ reputed make shall be used for the light fittings.
22
20728
456017.1
Supply and fixing of ALL WEATHER LED INGROUND LIGHT 5W IP67 WARM WHITE YELLOW , complete in all respects.
12
2606
31281.6
Supply and fixing of LED Solar Post Top light IP65 LED Solar post top with built-in Solar panel including 4 mtr. Post Top Decorative Pole, LED light and Lithium battery with charge controller and 2 PIR sensors with 360º coverage, complete in all respect. (make: Wipro/Philips/ or equivalent)
12
38947
467365.8
MULTIPURPOSE HALL
Providing and fixing three-layer construction, wooden plank/engineered Wood size 185—200 mm X 2000-2426 mm of 3 strip oak with a total thickness of 15 mm and a wear layer thickness of 3.5mm should be resandable up to 2 to 3 times. Surface Treatment: Matt/ Ultra matt Lacquer, Core: Pine/ Spruce/ Alder. Joint: Woodloc 5S, fifth-generation locking system, Moisture Content as per EN 13183: 7%, Reaction to fire as per EN13501-2:1 Dfl- s1CARB 2 compliant, Biological Durability as per EN350-2 Class1 confirming to strict quality and environment norms. It should be certified by PEFC, FSC, Blue Angel, and Real Wood. Matching Accessories like skirting & profile with,. Installation should be done by a trained and authorized team on Zero level of the hard surface .Make-Kahrs, Armstrong
43.1
7100
306010
Providing and laying of printed saxony carpet of FloorMaster Brand, manufactured in Indonesia or equivalent, having 100% Type 6' Nylon/Polyamide Crealon or equivalent and 1/10 gauge, . The carpet should have a primary backing of woven pp and secondary backing of weaveback to ensure high performance and comfort. The carpet should be of 4M width to ensure lesser joints and minimum wastage. It should have a minimum total weight of 1650 gsm and minimum pile weight 800 gsm , minimum number of tufts to be 185040 or more The carpet should also qualify to the following minimum European standards performance specifications - (a) Fastness to rubbing, dry (ISO 105 X-12), minimum rating should be 4-5; (b) Fatness to rubbing, wet (ISO 105 X-12), minimum rating should be 5; (c) Water fastness, (ISO 105 E-01), minimum rating should be 4-5; (d) Fastness to light (ISO 105 B-2), minimum rating should be 5; (e) Thermal Resistance (ISO 8302), minimum rating should be 0,072 m² K/ W; (f) Impact sound insulation (ISO 140 - 8), minimum rating should be 25dB. The carpet should be Scotchguard ready for better stain resistance, and should have an approved fire rating of Class 1 under Bf1S1 and should be recommended for commercial usage under Class 23/32 classification." duly installed on smooth hard floor with company recommended adhesive and underlay of 10 mm.The panel shall be mounted by tongue and groove mechanism using inside clip on Knauf aluminium extruded keel made of Grade 6063-T5 having dimensions 3000(L) x 24(H) x 15.5(W).
148.72
2350
349492
AuditoriumKNAUF WALL PANEL - WW CHANNELED: Providing and Fixing Knauf Channeled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White) and a melamine balancing layer on the reverse side in pattern and design as approved by Architect in charge, including the cost of all necessary panelling in all levels in suitable material (MS/wooden/Plyboard etc. as aprroved). The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13/21mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece hot pressed to achieve NRC upto 0.6. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Knauf and approved by the Architect/ Engineer-in-Charge.
-
-
-
The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. To ensure specification of tiles, Manufacturers Test Certificate is required having complete site address & duly signed by Manufacturer. INSTALLATION: An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface for fixing Knauf Keel. Install Keel vertically using screws and plugs at spacing of not more than 600mm centre-to-centre. The first and last keel should not be more than 150mm from the ends. Trim the tongue of the first bottom panel and install using headless nail with groove side upward. Subsequent panels are installed with tongue side downward by engaging with each other using tongue and groove mechanism and secured by inside clip. Continue this process until required height is achieved. Shorter butt edges need to be joined using industrial/wood glue. The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge. Finish off the edges using wooden moulding of matching colour (by others). Installation should be carried out as per Knauf recommended procedure and designs approved by the Architect/ Engineer-in-Charge. (MAKE - Armstrong/ Nittobo/ Tranquil or Equiavlent)
186.8
8178
1527698.97
Providing and Fixing of Knauf Optra Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell) in pattern and design as approved by Architect in charge, including the cost of all necessary panelling in all levels in suitable material (MS/wooden/Plyboard etc. as aprroved) . The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%.
-
-
-
INSTALLATION: An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600mm and 4 nos. in case of 600x1200mm. Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Knauf Optra Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained(MAKE - Armstrong/ Nittobo/ Tranquil or Equiavlent)
131.88
8226
1084855.43
AUDITORIUM ACOUSTICAL FALSE CEILING Providing & Fixing of Knauf Fibre Glass Acoustical Suspended Ceiling System with 15mm thick Optra Microlook 90 Edge Tiles with Knauf Suprafine 15mm face exposed grid in pattern and design as approved by Architect in charge. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance ≥88% as per ASTM E-1477, Colour black, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 20/25mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85%.
-
-
-
SUSPENSION: The tile shall be laid on Knauf Suprafine 32 with 15 mm wide T - section flanges colour global white having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill.
-
-
-
INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Knauf suspension system (specifications above) at 1200mm maximum. The First/Last Knauf suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall.
Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.
Perimeter trim to be Knauf wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum.
-
-
-
Installation shall be carried out as per Knauf recommended procedure.
KNAUF SUSPENSION SYSTEM accessories supplied by Knauf consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners); T- sections shall be pre- painted with polyster paint all complete including combination of Gysum board bands with cope light provision installed on GI metal frame work as per DSR norms at all heights as per specifications drawings & as directed by Engineer –in – charge at an height of 6 mtr in auditorium including scaffolding, lead lift taxes complete job with material & labour and L angle hanger of desire length. (MAKE - Armstrong/ Nittobo/ Tranquil or Equiavlent)
177.34
2521
447205.37
Providing and Supply Auditorium Chair Tapestry S60(L) X 710(8) X 1010(H), Total Height from floor 1070 mm+/ 10mm, Width centre to centre 560 mm+f- 10mm, Depth 750 mm +110mm, Seat Height 460 mm+/-10mm, Arm Height 620 mm +/- 10mm,Side leg 25x2 mm MS Flate & Pipe, Grouting supporting Plate welded\80x180x4 mm with 4 Hole Bock Assembly. The bock mode in PU Foom inserted 25x5 mm flate supported by 20x3 mm patti. Back size is 730x480x120 min, The chair is provided witha Sliding mechanism bock and seat siding 125 -140mm, Seat assembly. The seat is made of PU |foam upholster with fabric 100% polyester ond inserted ply 12mm, Seat Size 470x440x 1 30mm Arm Res. The ormrest is made in PP Arm + Lower fitted arm rest pad within same fobric. Powder Coating. All metal component are powder coated in black colour 70-80 micron (Make - (Geeken (Auditorium Chair , Audi 11) / Bernharth or Equivalent)
120
14856
1782720
"Supply of 2 x 50W square decorative leser cut designer column light having LED Colour Temperature of 3000K/4000K/6500K 230-240Vac CRI 80 MacAdam step-3, Make of LED: Nichia. Height 4000mm
Light Distribution Symmetrical, Electronic driver ON/OFF LUMINAIRE TYPE Column Light with Bracket. IP rating IP65, Extruded square aluminium tube (grade 6063 with test certificate) Sq. 150 x 3mm thickness with 850mm bracket in built with 50W Lumianire. Should have Bespoke laser cutting design options. SS fasteners. Must be equipped with Pre treated epdm black gaskets. Should have Die-cast aluminium mounting plate Sq.300 x 16mm thick with 4 Elongated holes 48 x 24 to suit M20 bolts at CC 215 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foudation.
-
-
-
Hot dip
galvanised foundation bolt. Mechanical resistance IK06. It should be Pure polyester powder coated process : Acid treatment & pure polyester powder coating. Two lamp positions are available, One in
the Square tube with controlled downward light emission Optical grade clear toughened glass diffuser of 4mm thickness with controlled downward light emission. Lamp fixed position. Other LED
is inbuilt with the bracket of 850mm long. The light distribution will be symmetrical Type III. These luminaire should contains built-in IP 65 LED modules. LED modules are engineered accordingly to the
existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 85%, power factor 0.9, THD 10%, Surge protection 6KV. Make- K-Lite Model-KL4584"
28
96460
2700880
Supply of Static White/ RGB/ RGBWSurface/Wall mounted Narrow/ Medium/ Wide/ Elliptic beam Linear Wall Washer luminaires suitable for outdoor applications of Facade Lighting. Power consumption should be between 36W at steady state full intensity. Luminaire should be able to run on DC Voltage. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP66or higher. Operating Temperature : -10°C to +50°C, Operating Humidity : 10% -90%,.LEDs of CREE / LUMILED / OSRAM / NICHIA/ reputed make shall be used for the light fittings.
24
21819
523656
Providing and Supply Centre Table, Ambu – Teakwood Dining Table with Stone Top; dimensions of 1900 × 1000 × 760 mm, showcases a natural teak color with a matte finish. It features no additional finishing effects and is crafted from a combination of stone and teak wood as per design approved by Architect in charge (MAKE - Alankaram/ Geeken, Bernhardt , Godrej or Equivalent)
11
152916
1682083.37
Providing and Supply Jadi – Wooden chair; furniture measures 485 × 550 × 955 mm and comes in a rich walnut color with a matte finish. It features an antique finishing effect and is primarily made from beechwood as per design approved by Architect in charge (MAKE - Alankaram/ Geeken, Bernhardt , Godrej or Equivalent)
10
32750
327500
Providing and supplying three Seater Sofa, Aronui – Teakwood Sofa with Blue Fabric, Three Seater; modern-style seating piece measures 1950 × 845 × 820 mm and features a natural teak color with a matte finish. Made primarily from teak wood, it has no additional finishing effects and offers seating for three people. The upholstery is made from fabric in a rich blue color as per design approved by Architect in charge (MAKE - Alankaram/ Geeken, Bernhardt , Godrej or Equivalent)
8
95000
760000
Directional & Informative Signages (MR)
-
-
-
Providing and fixing StandAlone Signage in Marble of approved thickness with powder coated 10-12mm MS letters and illustration at desired locations with letters (in english, hindi and Braille)- etched, through cut, infilled or painted, also including the cost of design, fabrication and onsite installation with all the necessary accessories and equipments for fixing on any surface as per drawing and design approved from Architect in charge English: Helvetica Font with min. 36 size Hindi: Krutidev Font with min. 36 size
-
-
-
Signage-A
2
44500
89000
Signage-B
4
24500
98000
Signage-C
12
12750
153000
Providing, fabricating and fixing/ erection of 150mm Red Sandstone Free standing letter at desired location as per approved drawing; having Helvetica Font with 450mm size, or in Hindi as desired. Also including cost of providing and fixing of fasteners complete in all respects as per Architect in charge
14
12850
179900
in HINDI
14
12850
179900
Metal Backlitt Signage in 200mm size fabricated in 6mm SS Sheet
18
7851
141318
Receiving, storing, handling, shifting, installation, testing & commissioning of RO Processing Capacity: 25 liters per hour (LPH)
Dimensions:
Width: 466 mm
Depth: 580 mm
Height: 1445 mm
Power Specifications:
Voltage: 220v/50Hz
Cooling Power: 480 watts
Heating Power: 450 watts
Material:
Machine Body: Stainless Steel (SS-304)
Tank Material: Stainless Steel (SS-304)
Net Weight: 110 kg
Capacity with 3 Taps:
Cold Water: 20 liters
Ambient Water: 25 litersincluding all accessories complete in all respect etc. (Make -Wae/ Voltas or Equivalent)
2
120500
241000
Sound System
-
-
-
Supply and laying of Chetan Gold 2 Core
100
127
12761
Supply, Installation, testing and commissioining of Denon AVR-X250BT 5.2 Channel 4KAV Receiver with Bluetooth Make: Bose/ L-Acoustic/ Powersoft
1
44831
44831
Supply, Installation, testing and commissioining of 19" DSP Controller 4in / 8out, 24bit /96kHz, USB/ RS232/ RS485, 1R. Make: RCF/Allen&Heath/ Yamaha
1
189673
189673
Supply, Installation, Testing and Comissioning of Power Amp. class D 4x 500W rms /4Ohm, SMPS, 1RU. Make: Sony/Philips/Gemini/Tascam
1
167936
167936
Supply, Installation, Testing and Comissioning of Power Amp. class D 2x 500W rms /4Ohm, SMPS, 1RU. Make: Sony/Philips/ Gemini/Tascam
1
100860
100860
Supply, Installation, Testing and Comissioning of Power Amp. class D 2x 2400W rms /4Ohm, SMPS, 1RU Make: Sony/Philips/Gemini/Tascam
1
208068
208068
Supply, Installation, Testing and Comissioning of Multipurpose 2-way passive speaker Make: Sony/Philips/Gemini/Tascam
3
117181
351543
Connector & Accessories Charges
1
152542
152542
Supply, Installation, Testing and Comissioning of Reflex Loaded PASSIVE subwoofer Make: Sony/Philips/Gemini/Tascam
2
309534
619068
Supply, Installation, Testing and Comissioning of Moose I8 8" Passive InstallationSpeaker Make: Sony/Philips/Gemini/Tascam
8
55480
443840
Supply, Installation, Testing and Comissioning of Valrack 17U Floor Mounting Rack Make: Sony/Philips/Gemini/Tascam
1
55932
55932
Rack Wiring
1
15254
15254
Supply, Installation, Testing and Comissioning of Shure SM58S Vocal Microphone(with On/Off Switch) Make: Sony/Philips/Gemini/Tascam
4
15000
60000
Supply, Installation, Testing and Comissioning of 16-Channel Mixing Console Make: Sony/Philips/Gemini/Tascam
1
77966
77966
Supply, Installation, Testing and Comissioning of MS. Speaker Ceilling Mount C15 720mm
Make: Sony/Philips/Gemini/Tascam
3
6780
20340
Supply, Installation, Testing and Comissioning of Shure SVX14/PGA31 HeadwornWireless Microphone System
Make: Sony/Philips/Gemini/Tascam
2
28305
56610
Supply, Installation, Testing and Comissioning of Shure BLX24/PG58 Wireless VocalSystem with PG58
Make: Sony/Philips/Gemini/Tascam
4
36949
147796
Supply, Installation, Testing and Comissioning of Shure CVG18D-B/C 18 GooseneckCondenser Microphone withIntegrated Desktop Base
Make: Sony/Philips/Gemini/Tascam
2
22966
45932
High Effeciency Hot & Cold VRF System
-
-
-
Supply of VRF air-conditioning system comprising of following items:
-
-
-
Variable Refrigerant Flow Air-conditioning System (Heating & Cooling)
-
-
-
Supply, installation, testing and commissioning of Variable Refrigerant Flow modular type air-conditioning system suitable for Cooling & Heating both by scroll compressor controlled by inverter complete with indoor and outdoor units with individual/group wired and wireless/wired remote controller for indoor units and centralized controller, interconnecting refrigerant piping, full charge of refrigerant gas (R-410A) & oil, internal control cabling and fittings etc. as per details given in specifications and having following items. The out door units shall be suitable for 3 phase 4 wire system, 415V + 10 %, 50 Hz AC supply and indoor shall be suitable for Single phase 220-240V, 50 Hz AC supply.
-
-
-
Outdoor Units
-
-
-
Supply, installation, testing & commissioning of Modular type outdoor units equipped with highly efficient scroll compressors (OEM manufactured) fully inverter controlled and Inverter technology used for compressor should be of IGBT with IPM technology, special heat exchanger with blue fin coating to protect against corrosive environment, low noise condenser fan & includes full charging of R-410A refrigerant.
The compressor should be 100% inverter based Scroll compressor system .
Capacity regulation of DC inverter compressor shall have precise capacity control technology of 0.1 Hz increments inverter frequency to achieve minimum 990 Steps to optimize energy efficiency during part load operation and to maintain stable condition in the room.
VRF unit shall contain vapour injection system to reduce compressor power and to help unit work under adverse ambient condition. The system also should have PHE to increase sub cooling to improve the over all efficiency of machine.In outdoor unit the heat exchanger should be of sigma shape for better heat transfer ratio.
-
-
-
The unit shall also have feature to automatically modulate the evaporating temperature between 4 deg C to 14 deg C with respect to load for better comfort and energy efficiency.
-
-
-
Vender need to submit the suitable model details along with OEM confirmation &atalouge for COP along with tender document.
-
-
-
All the units shall be provided with built-in microprocessor control panel, for automatic operation and capacity control. Machines shall be suitable for working with BMS system.
-
-
-
Each VRF module must have accumulator to handle liquid and safe guard compressor against liquid flood back due to dynamic load condition.
-
-
-
VRF system shall have auto Restart function i.e. In case of power failure, units should restart automatic when power resume.
-
-
-
VRF system shall have auto bypass i.e. If any one IDU have any electric or PCB failure, rest of the system should continue to operate.
-
-
-
The VRF system shall have free phase technology, which shall correct phases automatically in case of phase reversal.
-
-
-
Below Mentioned single ODU Models should be able to make module combination
-
-
-
Supply of Outdoor Unit
-
-
-
Multi V5 Heat Pump, 14.0 HP
2
362000
724000
Multi V5 Heat Pump, 16.0 HP
1
470000
470000
VRF INDOOR UNIT
-
-
-
Supply of Indoor units address setting and capacity as mentioned below. multispeed motor, coil section with DX coil, outer cabinet, drain pan mechanism insulation, pipe connections and fresh air intake connector as per Hitachi specifications.
-
-
-
CASSETTE IDU 4 WAY
-
-
-
3.5 TON
10
45040
450400
HI WALL UNIT
-
-
-
1 TON
2
25792
51584
Supply of Multikit Joints-Indoors
11
8500
93500
Supply of ODU Connection kit
1
13500
13500
Supply of 4 way CST panal
10
9860
98600
Supply of remote for indoor unit
12
4500
54000
Installation of VRF air conditioning system of following items
-
-
-
INSTALLATION OF VRF AIR CONDITIONING SYSTEM
-
-
-
44 HP Heat Pump Type (Cooling & Heating )
1
210000
210000
Vacuumising the system upto 500 micron level which ensures the zero moisture content level in piping which results in better cooling efficiency and long life of system
-
-
-
Pressure testing of System with Nitrogen Gas with 1.5 Times of working pressure of R410A Refrigerant Gas to ensure leakproof system
-
-
-
To flush the system with food grade nitrogen gas to remove carbon contents , dirt particles to make sure that there is no chance of mixing of any impurity with refrigerant gas
-
-
-
Lifting and shifting charges of outdoor unit
1
35000
35000
Civil Blocks for outdoor unit
-
-
-
INDOOR UNITS
-
-
-
CASSETTE UNITS
10
3500
35000
HI WALL UNIT
2
1500
3000
COMMISSIONING OF SYSTEM
-
-
-
(R410A Make : Dupont , Honeywell -OR OEM Approved)
-
-
-
REFRIGERANT PIPING
-
-
-
Supply installation testing and commissioning of Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per HITACHI STD. & specifications, all piping inside the room shall be properly supported with MS hanger.
-
-
-
Make:- Mandev, Mexflow or OEM Approved Only (Copper Pipe)
-
-
-
Make:- Superlon, Accoflex, A-Flex or OEM Approved Only (Insulation)
-
-
-
Make:- Harris (Brazing Rod)
-
-
-
41.3 mm día 19 mm thk. Insulation
450
2500
1125000
34.9 mm dia 19 mm thk. Insulation
-
-
-
28.6 mm día 19 mm thk. Insulation
-
-
-
22.2 mm dia 19 mm thk. Insulation
-
-
-
15.9 mm dia 13 mm thk. Insulation
-
-
-
12.7 mm dia 13 mm thk. Insulation
-
-
-
9.5 mm dia 13 mm thk. Insulation
-
-
-
6.4 mm dia 13 mm thk. Insulation
-
-
-
DRAIN PIPING
-
-
-
Providing and fixing rigid PVC piping complete with fittings, supports as per OEM STD.& specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation.
-
-
-
Make:- Finolex,Supreme, Kissan ,Astral, or OEM Approved Only
-
-
-
Make:- Armacell, Kemflex, Superlon or equilent (Insulation) Or OEM Approved Only.
-
-
-
40 mm dia
125
160
20000
32 mm dia
130
140
18200
CONTROL CABLING
-
-
-
Supply & fixing of control cum transmission wiring (Sheilded) of Copper conductor cable alongwith conduit for looping between indoor & outdoor VRF system & to main Central remote controller system
-
-
-
Make:- Polycab, Finolex, KEI, R.R. Cabel or OEM Appoved Only.
-
-
-
2 C X 1.5 Sq. mm
650
240
156000
Outdoor unit stand
2
7500
15000
[ AUDIO VISUAL FOR M.P. HALL ]
Supply Installation Testing & Commisionning of Laser Projector,WUXGA resolution (1,920x1,200) , 7000 ANSI Lumenns ,Contrast Ratio 3,000,000:1, Zoom , Focus &Lens
Shift , (Make - Sony , Epson , LG )
1
577200
577200
Supply, Installation testing & commissioning of 180" diagonal motorized screen with aspect ratio of 16:9, complete with all standard accessories as per the tender
specification (Make - Liberty , Suvira , Prima )
1
168480
168480
Supply Installation Testing & Commisionning of HDMI PLATE
2
5040
10080
Supply Installation Testing & Commisionning of HDMI Switch (2x1) (Make - Aten ,
Milestone , Kramer )
1
37440
37440
Supply Installation Testing & Commisionning of HDMI WIRE ( 1 M)
2
3744
7488
Supply Installation Testing & Commisionning of HDMI WIRE ( 5 M)
1
4680
4680
Supply Installation Testing & Commisionning of HDMI WIRE ( 15 M)
3
15600
46800
Supply Installation Testing & Commisionning of Audio Embader (Make - Aten ,
Milestone , Kramer )
1
15600
15600
Supply Installation Testing & Commisionning of Projector Lift (Make - Liberty , Suvira ,
Prima )
1
95988
95988
Stage Lighting -
-
-
-
SITC of 54x3W LED PAR Light used as Effect
Light, Spot Light and Strobe Light etc. with
below specifications:
• Lamp: 54 X 3W RGBW LED (12R+18G+18B+6W)
• Max. Power consumpsion: 160W
• Power supply:240V AC, 50/60Hz
• Power cable: 3 core 1.5 sq. mm. copper PVC
insulated
• Channels: 8 Channel DMX-512
• Beam angle: 25°
• LUX @ 2m: 11,000
• Control mode: DMX,Manual and Master Slave
• Dimming: 0 - 100%
• Function: strobe, dimming, sound active and Master slave.
• Housing: Diecast aluminium with black epoxy
polyster powder coating
• Power and DMX: Loop in and loop out
Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
4
17940
71763.04
SITC of LED PARCAN Light used for dance hall,
architectural and stage lighting with below
specifications:
• Lamp power - 100W LED
• Power supply - 240 AC, 50/60 Hz
• Channels: 2 channel DMX 512
• Control: Manual, DMX
• Color Temperature: 3000K
• CRI 90
• Function: Dimming, Strobe
• Dimming: 0-100%
• Beam Angle - 9/15/20°
• Protection rating - IP20
Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
2
34250
68501.08
SITC 200W LED Fresnel light used as a Key light,
Back light, Fill light with dimming, spot & flood
focus versions for creating various effects for multiple
applications with specifications as below.
• Lamp power - 200W COB LED
• Power supply - 240 AC, 50/60 Hz
• Power cable - 3 core 1 sq. mm. copper PVC
insulated • Color Temperature: 3200K
• Control : DMX512 / Manual • Spot - Flood focus adjustment: Manual • CRI 90• Dimming - 0-100% through manual and DMX• Beam Angle - 10°-50°• Protection rating - IP20 • LUX at 2m: 38,200 at 10° & 3,500 at 50° (3200K) . Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
2
66054
132109.24
SITC of 200W LED Profile Spot Light used as a Spot Light and high-contrast gobo projection Light. Other
Technical specifications as below:
• Lamp Power : 200W COB LED • Power Supply : AC 230V, 50Hz.• CRI : 90 • Colour Temperature : 3200K• Focus : Manual Focus • Beam Angle : 19°
• Control : DMX, Autorun and Master/Slave
• Shutter arrangements : Beam shapping shutter
or plastic gobo projection assembly.
• Lux Level - 20,000 lux @ 2 Mtr with beam angle
19°,3200K • Dimming : 0 - 100% dimming
• Protection Rating : IP20 • Body Color : Black
Make : Bezel/Martin/ETC/ROBE/PLS US
2
66054
132109.24
SITC of LED 2x2 blinder matrix Light used in
Entertainment applications, Night club, Fashion
shows, Film, Band performances, Discotheque,
Stage performance , TV studio and large-scale show
etc fixture with advanced COB LED technology with
below specifications:-
• Power Consumption: 400W • Power Supply: 240 AC, 50-60Hz • Light Color: Single color warm white / Cool Light • Channel: 4/8 channel • Lifetime: Over 50,000 hours • Beam Angle: 30°
• Control mode: DMX512,Master/Slave,Auto
Run,Sound active. • Dimmer: 0 -100% linearly adjustable • LUX: 8200 LUX @ 2m • IP Grade: IP20
Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
2
34250
68501.08
SITC of Diecast aluminum "C" clamp with safety
locking chain, duly powder coated in black matt
texture finish and technical specifications as below.
• Finish - Pretreated and black epoxy polyester
powder
• Safe working load – 150Kg. Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
10
3261
32619.6
SITC of Safety bond with lock clip (Safe Working Load 100Kgs ) to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly including all accessories etc complete as required.
10
3229
32293.4
SITC of Identification name plate round 80mm undergone through 7 Tank chemical treatement to keep them rust free and duly powder coated in matt White texture finish including all accessories etc complete as required.
10
2937
29373.9
SITC of Fixed Front of House light bar, length 10Mtrs made using 40NB dual barrel with perforated Cable tray undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish and provided with suitable suspender and clamps.
2
34873
69747.16
SITC of MS sheet metal fabricated power junction box duly powder coated and fitted with 2 10amps 3 pin IEC socket,ON/OFF switch and necessary glands to power splitters and console undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the cable glands.
2
2207
4414.08
SITC of MS Signal junction box made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX out connector of below specifications:-
• All metal housing with RF protection &
electromagnetic shielding
• Connection to join pin 1 to chassis ground
2
10964
21929.9
SITC of MS Signal junction box made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish finish 5 pin XLR DMX in connector of below
specifications:-
• Connection to join pin 1 to chassis ground.
1
1566
1566.42
SITC of DMX lighting junction loop box made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX in / out connector of
below specifications:-
• Connection to join pin 1 to chassis ground.
1
5258
5258.19
SITC of MS Auxilary fabricated marshalling boxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish for all the light bar with required no of ivory connectors including all accessories etc complete as required.
2
19550
39101.82
SITC of MS Fabricated made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish power junction box (PJB) to terminate the Motorized section power connections including all accessories etc complete as required.
2
1960
3921.06
SITC of Internal earthing copper bare conductor network for earthing of lightning bars ,cable trays & metal accesseries related to work coming under the scope of work including all accessories etc complete as required.
2
14787
29574.3
Supply, Installation, Testing and commissioning of Installation hardwares required for the successful execution of work
2
22107
44215.26
SITC of 12 Way Direct Lighting Distribution Board made up of MS CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish consisting of suitable rating TPN incomer, SP MCB's for the junction boxes fixed on the top of the grid including wiring and busbar connection with proper earthing and Hinged door with magnetic door lock including all accessories etc complete as required
1
76971
76971.69
SITC of Digital Lighting Console with 512 DMX
channels
• 512 DMX Channels.
• 1000 scenes memories.
• 12 hot keys for scene recall.
• 2 cross fade for scene change
• save 512 group of chasers and each chaser contains 256 steps
• Audio control.
• DMX connection: XLR 5-pin
• Weight: 2.3kg
• Dimension: 482(W)x55(H)x176(D)mm Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
1
123152
123152.65
SITC of Wall mount 2 feeder motor control centre panel & Remote control panel ( for the motorized Light bar & motorized FOH bar & motorized curtain) with emergency trip, necessary contactors and relays, push button stations and contact elements to control the motors system for curtains including all accessories etc complete as required. Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
1
114356
114356.02
SITC of Grid mount photo isolator DMX Amplifier unit 1 DMX input and 8 isolated output with following specifications:
• Power Supply: 90-240V AC, 45-63Hz.
• Control: DMX 512 protocol,
• Control Signal input: 5 pin XLR female,
2
54980
109960.3
Supply, Installation, Testing and commissioning of 5 Pin XLR Male & Female Connectors for DMX network
8
1467
11743.04
Supply, Installation, Testing and commissioning of 5 Pin XLR Termination Connectors for DMX network.
8
881
7051.04
Supply, Installation, Testing and commissioning of Black valcro tape for Cable dressing.
2
1225
2450.68
Supply & laying of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm including terminations etc complete as required.
150
186
27946.5
Supply & laying of FRLS PVC copper multicore cable 1100V grade confirming to IS694 cable of size 7 core x 1.5 sq.mm including terminations etc complete as required.
12
428
5142.12
Supply & laying of FRLS PVC copper multicore cable 1100V grade confirming to IS694 cable of size 4 core x 4 sq.mm including terminations etc complete as required.
8
761
6088
SITC of Screened DMX signal cable for DMX network including terminations etc complete as required.
80
199
15936.8
Proscenium stages -
-
-
-
Supply of Auditorium Proscenium Areas: Veneer Paneling: SITC of premium grade veneer panelling for the auditorium walls as shown in the drawing areas, with specifications of the veneer to be as follows: Standard available size: 8ft height X 4ft Width with thickness of around 4mm (including face skin and backing ply layer). Cost to include professional polishing of the veneer panels upon application to arrive at the desired final outcome as prescribed by the architect. Samples to be provided for approval. The entire paneling to be supported on an MS framework proscenium horizontal facia and dual pillars as per drawings, which is to be created with 50mmX30mm X 3mm thick square tube as per site conditions
1
530067
530067.95
Stage Curtain system -
-
-
-
SITC of Main Valence fixing arrangement using 40NB Pipe 2mm thick, 10 mtr in length MS pipe, undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with matt black texture finish with mounting brackets to suspend the arrangement including all accessories etc complete as required Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
1
28482
28482.23
SITC of Main curtain track system 10 Mtr long, centre parting with overlap of 0.9mtr provided with, Heavy duty extruded aluminium I track of 48x84mm, powder coated Track mounting brackets constructed of C track of dimension 40X50X40mm Electromechanical drive unit with 3PH INDUCTION MOTOR, 1.1KW, 3000RPM, 90B5 FLANGE MOUNT with GI wire ropes of 3mm in diameter constructed with 7 bundles of 7 strands with steel core at center Curtain holding Nylon wheel trollies consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the track.Nylon moulded 6201 Ball bearing Diverter pulley with with 90mm for outer diameter, 72mm diameter at groove base, 19mm pulley thickness & MS yellow passivated Routing pulleys with 165mm for outer diameter, 150mm diameter at groove base with 12mm pulley thickness including all accessories etc complete as required. Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
1
386932
386932.95
SITC of Fixed Rear curtain track system 10 Mtr long, centre parting with overlap of 0.9mtr provided with,Heavy duty extruded aluminium I track of 48x84mm, powder coated Track mounting brackets constructed of C track of dimension 40X50X40mm with Curtain holding Nylon wheel trollies consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the track including all accessories etc complete as required. Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
1
270050
270050.24
SITC of Fixed Wing Structure designed as per site condition for a height approx 5 Mtr x 1.5 Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing with all accessories as required. Make : Bezel/Martin/ETC/ROBE/PLS US/ or equivalent
2
73342
146684.8
SITC of MS Fabricated made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish power junction box (PJB) to terminate the Motorized section power connections including all accessories etc complete as required.
1
1960
1960.53
Supply & laying of FRLS PVC copper multicore cable 1100V grade confirming to IS694 cable of size 7 core x 1.5 sq.mm including terminations etc complete as required.
20
366
7337.8
Supply & laying of FRLS PVC copper multicore cable 1100V grade confirming to IS694 cable of size 4 core x 4 sq.mm including terminations etc complete as required.
10
650
6506.5
Cyclorma Screen
-
-
-
Supply of Cyclorma Screen with frame ,size 36'x18', Cyclorama Screen with Frame Hi gain screen with PVC cloth & metal framework out of 40mm & 20mm dia MS pipe of suitable thickness as per the design drawings and site requirement or direction as per Engineer-in -charge, including black enamel paint on the framework. Appx. Size:-As per actual sizes
1
360172
360172.84
INTERIOR WORKS
-
-
-
Panellings
-
-
-
Wall Panelling: Fabricating & fixing full height plywood panelling (overall thickness 62mm) consisting of 50mm x 25mm x 2mm GI sections approved Make framework with all necessary reinforcements required of GI, at spacing not exceeding 600mm x 1200 . Partition framework to be fixed to existing masonry walls. Rate to include providing and fixing of additional GI sections of approved size as per Architects drawings. Cost to include additional sections (horizontal & Vertical) as required for fixing of Digital Displays, Screens.,, Glass boards, and White boards as indicated by the Architect including the cost of Duco paint of desired shade. Cost to also include the necessary provisions required to take Data & Electrical conduiting.
43.6
7485
326346
Partition
-
-
-
Provding and fixing Metal partition of CNC 4-8mm MS Plate Fixed in a 50mm thk. Orginal second class Teak wood frame with finish of Physical Vapor Decomposition coating , design as per drawing and approval of architect in charge.
10.8
16947
183027.6
Display Cabinet
-
-
-
P & F Full ht. open shelf display for products display of amethi handicraft of 40mm thk. wood of different sizes finished with PU polishing design as per drawing and approved by architect incharge
20.94
23768
497705.48
Providing and fixing low-height wooden storage made of 18 mm thick board, with 40 mm thick Magnifera wood shutters featuring cane bamboo sheet as per the design and approval of the architect in charge..(C-9)
7.2
29172
210044.3
Wall Treatment & Finishes
-
-
-
Providing and Finishing wall with Stucco Texture paint (ARCHI CONCRETE SLAB) (WF-2) (Asian/Nerolac/Berger or Equivalent)
136.27
2152
293253.04
Providing and finishing Artistic Paint should be of high-quality, eco-friendly, water-based acrylic or enamel paints, suitable for both interior and exterior applications. It will be hand-painted or stenciled using high-pigment paints for vibrant finishes, with options for texture effects such as marbling or glazing. Custom color mixing is required to match the design palette, and specialty finishes like metallic, pearl, satin, or textured effects will be incorporated as per the design. A protective clear coat will be applied to seal the design and provide long-lasting durability, ensuring resistance to UV exposure, moisture, and wear. Paints used should be non-toxic, low in VOCs, and comply with environmental safety standards. A minimum 5-year warranty against fading, cracking, or peeling is required, along with detailed maintenance instructions. All paints and finishes must be pre-approved by the project architect, with samples and mock-ups provided to test color and finish quality.
68.13
3228
219923.64
False Ceiling :
-
-
-
Supply, installation, and finishing of a POP (Plaster of Paris) ornamental false ceiling with moldings and 3D decorative elements as per the architect's approved design. The ceiling will be supported by a galvanized iron framework; power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre o centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.|. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws
136.27
3005
409566.3
@ 230 mm interval,and finished with surface sanding and painting the ceiling in desired shade in 2 coats as approved by Architect in charge.(Armstrong/Saint Gobain or Equivalent)
-
-
-
Providing & fixing of Precast Handmade Ceramic tile 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of :Light shade pigment using white cement.(Make : Bharat floorings/House of Kalindi or Equivalent)
136.27
2959
403222.93
Providing and Fixing of Service counter 750/1100 high with Italian marble/corian top and glass mounting Size 2400*1100 as per drawing with 4mm Veneer over 19 mm Ply water Proof. Plywood conforming to international formaldehyde emission standards) and post formed edges finished and duly Melamine/ PU polished on outer surface and inner surface finished with mica approved by the Architect.
1
135909
135909
LIBRARY
-
-
-
GST 828 Student/Training Room Chair, PP Handle ABS Seat & Back, Full PP Writing as per design approved by Architect in charge make:Geeken/ or equivalentg Pad, Seat & Back Fabric Tapestry
8
13650
109200
GMS 18
Steel Library Rack (Single Face), Thickness 0.8mm W925 X D300 X H1800 as per design approved by Architect in charge make:Geeken/ or equivalent
8
31800
254400
Chair GA 559 Medium Back Chair, PP Arm, Gas Lift, Nylon Base, Seat & Back Mesh Tapestry, as per design approved by Architect in charge make:Geeken/ or equivalent
2
7400
14800
COMPUTER DESK 1 Computer Desk, Particle Board Edge Banded Top as per design approved by Architect in charge make:Geeken/ or equivalent
4
17850
71400
OXY 4 Workstation Table W1200 X D1000 X H1150as per design approved by Architect in charge make:Geeken/ or equivalent
4
23000
92000
NOEL Wooden Chair with arms, Teakwood, Melamine Polish, Seat velvet tapestry as per design approved by Architect in charge make:Geeken/ or equivalent
16
16200
259200
Providing and Supply Jadi – Wooden chair; furniture measures 485 × 550 × 955 mm and comes in a rich walnut color with a matte finish. It features an antique finishing effect and is primarily made from beechwood as per design approved by Architect in charge (MAKE - Alankaram/ Geeken, Bernhardt , Godrej or Equivalent)
16
32750
524000
EQUIPMENTS
Supplying and Fixing of Open Gym Equipment Sit-Up Station (make Grandslam or equivalent) with 1500 x 1150 x 650 mm GI pipe of 114m dia X2.5mmthickness make : vinex or equivalent
2
112500
225000
Supplying and Fixing of doubel standing twister (make Modcon/Grandslam or equivalent) with 167X48X126 mm in SS, with seat and back material and aluminium post top caps make : vinex or equivalent
2
102000
204000
Supplying and Fixing of Air Walker Outdoor Fitness Equipment (make Modcon/Body Steel /Grandslam or equivalent) in SS, with seat and back material and aluminium post top caps make : vinex or equivalent
2
73000
146000
Supplying and Fixing of Shoulder Twirl Double In Outdoor Gym (make Modcon/Body Steel /Grandslam or equivalent) with in SS or powder coated MS, with seat and back material and aluminium post top caps make : vinex or equivalent
1
66200
66200
KIDS PLAY APPARATUS
Supplying and Fixing of Four Seater Arc Swing outdoor playing equipment (Make Arihant/ Kompain/ Funply) including necessary fittings, T&P etc all complete in direction of engineer in charge.
2
65844
131688
Supplying and Fixing of Multi Seater See Saw outdoor playing equipment (Make Arihant/ Kompain/ Funply) including necessary fittings, T&P etc all complete in direction of engineer in charge.
3
34267
102801.6
Supplying and Fixing of Turbo Tower outdoor playing equipment (Make Arihant/ Kompain/Funply) including necessary fittings, T&P etc all complete in direction of engineer in charge.
2
51920
103840
Supplying and Fixing of Curve Loop Climber outdoor playing equipment (Make Arihant/ Kompain/ Funply) including necessary fittings, T&P etc all complete in direction of engineer in charge.
2
64251
128502
Supplying and Fixing of BALANCING BRIDGE (MODEL NO- PGTH 03) outdoor playing equipment (Make Arihant/ Kompain/Funply) including necessary fittings, T&P etc all complete in direction of engineer in charge.
2
75933
151866
Supplying and Fixing of Four Seater MGR outdoor playing equipment (Make Arihant/ Kompain/ Funply) including necessary fittings, T&P etc all complete in direction of engineer in charge.
3
66574
199722.6
Sound System
-
-
-
Supply and laying of Chetan 1.5 Mtr RCA Male to XLR MaleCable Make: Bose/ L-Acoustic/ Powersoft
2
2700
5400
Supply, Installation, testing and commissioining of Yamaha PX3 Power Amplifier Make: Bose/ L-Acoustic/ Powersoft
2
39661
79322.4
Supply, Installation, testing and commissioining of LSZH Speaker Cable 2C/14 AWG 2.5Sq.mm. Jkt Purple 152M Make: Bose/ L-Acoustic/ Powersoft
709
217
153853
Supply, Installation, testing and commissioining of TruAudio AS-1 AcoustiScape 4.5"Outdoor Landscape Speaker Make: Bose/ L-Acoustic/ Powersoft
12
42647
511768.8
GST EXTRA AS PER APPLICBALE
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements