Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 Dec 2024
Closing Date16 Dec 2024
Tender Amount₹ 2,57,50,000
Costs
EMD
₹ 5,15,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPPRC_981745_1Bid Award Id
ViewTender No
24/GM-3/UPPCL/2024-25 DATED 14.11.2024Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
De-vegetation from monument by removing bushes, trees including complete uprooting from the wall & roofs / structures carefully including suitable chemical treatment to roots to avoid further growth including disposal of rubbish with in 50 mtr. Lead as per direction of Engineer in-charge.
36
415
14945.4
... More
Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
479.17
23
11428.2
... More
Removal of debris from monument carefully without damaging the buried architectural parts /remains of the monument and collect and stack all the intact parts at proper place for sorting of useful parts, study and refixing at the time of restoration of the monument as per direction of Engineer-in-charge / Local administration officer including 1.5m lift and 50m lead.
310
539
167276
... More
Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.
47.52
118
5643
... More
As in above item no.251 but excavation in soil mixed with mooram / single / kankar requiring the use of special T & P such as pickaxes, subbals etc.
10
142
1425
... More
Add to Item (251-252) to every additional 30m lead or part of 30m (100ft) or for every additional 1.5m (5ft) lift or part of 1.5m (5ft) 1.5 M to 3.0 M
10
19
199.5
... More
Sand filling in plinth excluding supply of necessary quantity of sand from a distance not exceeding 8km. From the site of work and including watering, ramming, dressing etc. Rate to include cost of materials, labour and T& P etc. required for proper completion of the work.
30
712
21375
... More
Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).
105
451
47381.25
... More
Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet).
43.25
997
43141.88
... More
Demolishing brickwork in lime or cement mortar of walls and vaults, arches, slabs etc including stacking of serviceable material and disposal of unserviceable material within 50 meter lead.
78
583
45497.4
... More
Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge.
50
594
29728
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
... More
Nominal concrete 1:3:6 or leaner mix (i/c equivalent design mix)
8.5
1699
14447.62
... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
21.6
1049
22677.62
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
400
3
1580
... More
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
50
2
134.5
... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :
-
-
-
... More
75 to 80mm dia pipe
10
52
528.6
... More
100mm dia pipe
5
54
272.3
... More
150mm dia pipe
5
56
280.15
... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
-
-
-
... More
15 mm to 40 mm nominal bore
10
104
1046
... More
Above 40mm nominal bore
5
112
563.5
... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction
-
-
-
... More
Up to 150 mm diameter
10
232
2321
... More
Above 150 mm dia up to 300 mm dia
5
318
1594.3
... More
Above 300 mm diameter
5
428
2144.65
... More
Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge :
-
-
-
... More
Up to 600mm diameter
10
485
4854.6
... More
Above 600mm diameter
5
1223
6118.25
... More
Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap.
4
669
2677.8
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
240
184
44232
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
Concrete of M10 grade with minimum cement content of 220 kg/cum
27
6169
166566.78
... More
Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 20 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work. All work upto plinth level
71.88
6032
433616.1
... More
2cm(3'4") thick damp proof coarse with cement and approved coarse sand 1:2 with inclusifn water proofing material as ordered by the Engineer-In-Charge in the proportion as specified by the manufacturers, inlcuding supply of all materials labour and T & P etc. required for proper completion of the work and inlcuding proper curing and shuttering necessary
247
228
56316
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
16.2
102
1653.21
... More
Providing & injecting chemical emulsion for Preconstructional and Postconstructional anti-termite treatment and creating a chemical barrier under & alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall & floor along the external perimeter of building expansion joints surrounding of pipes & coduits etc.complete plinth area of the building at ground floor only shall be measured as per I.S.63/3( part II 1981 ) Aldrine emlsifiable concentrate or any other approved material such as Htrachlore or Chlordance will be used . The rate of application of chemical emulsion shall be as follows: (I) Treatment for masonary & foundation 5litres/ sqm.
(II) Back fill in immediate contract with foundation 7.5 litres / sqm
(III) Treatment of top surface of plinth filling 5 litres/sqm . (V) Treatment of soil along external perimeter of building 7.50 litres/sqm.
(VI) Treatment of soil under Apron along external perimeter 5litres/sqm
100
180
18050
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
35
523
18312
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
46
273
12595.72
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
50
588
29414
... More
Suspended floors, roofs, landings, balconies and access platform
741
647
479760.45
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
51.87
514
26671.04
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
37.26
671
25010.03
... More
Stairs, (excluding landings) except spiral-staircases
60.75
534
32448.4
... More
Edges of slabs and breaks in floors and walls. Under 20cms wide
40
145
5824.8
... More
Weather shade, chajjas, corbels etc. Including edges.
45
664
29884.95
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
... More
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
22
268
5903.48
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
-
-
-
... More
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
Note :- The above item shall be used judiciously where specified quality of Fly Ash is available for mixing in concrete. Also, the guidelines issued by CDO, CPWD, vide circular no. CDO/SE(RR)/Fly Ash (Main)/102 dated 9th April 2009 shall be followed in such cases.
-
-
-
... More
All works upto plinth level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
44.2
6636
293341.7
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
0.5
6742
3371.05
... More
All works above plinth level upto floor V level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
183.4
6885
1262712.67
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
1
6990
6990.43
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete for proper completion of the work and including supply of steel its wastage. Thermo-Mechanically Treated bars of grade Fe-500D or more. ANALYSED AS PER SAIL RATE JULY ,21
26976.53
82
2225293.96
... More
Providing and laying lime concrete in foundation and plinth with 20mm down graded brick bats nominal size and lime mortar comprising of 1 lime putty : 1 surkhi : 1 coarse sand rammed and finished with gur and belgiri treatment including scaffolding if necessary complete.
1
5807
5807.35
... More
Providing and laying lime concrete in super structure with 20mm down graded brick bats nominal size and 50% lime mortar comprising of 1 lime putty : 1 surkhi : 1 coarse sand rammed and finished with gur and belgiri treatment including scaffolding if necessary complete.
1
9232
9232.1
... More
Providing and laying lime concrete on floors with 20mm nominal size brick aggregate and 50% lime mortar 1:3:6 (1 lime putty : 3 surkhi : 6 coarse sand) rammed and finished with gur and belgiri treatment.
1
6097
6097.1
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
0.1
2034
203.49
... More
First class bricks in 1:4 in cement and coarse sand of mortar in foundation and plinth including supply of all materials, labour and T& P etc. required for proper completion of work.
19.64
5006
98327.66
... More
As in item (303 to 307) above but in super-structure, including necessary cutting and moulding of bricks as required and also including honey comb brick work. Thickness of wall not to be less than 1.5 brick thick. Add for extra labour to above items.
243.43
5358
1304297.94
... More
As in Item (309) above but for wall of one brick thick. Add for extra Labor.
40.57
5301
215100.11
... More
Traditional brick masonry in lakhori bricks in lime mortar in proportion similar to the existing traditional lime mortar 1:1:1 (1 lime: 1 surkhi : 1 fine sand) and including curing, scaffolding where required and 5.0 m lift from plinth level.
-
-
-
... More
Lakhori bricks of Size 200mm x 100mm x 40-50mm
1
12279
12279.7
... More
Lakhori bricks of size 300mm x 200mm x 40-50mm
1
9657
9657.7
... More
Traditional brick work in plain arches in lime mortar 1:1:1 (1 lime : 1 coarse sand : 1 surkhi) and including curing, centering, shuttering, scaffolding where required and 5.0m lift from plinth level.
-
-
-
... More
Lakhori bricks of Size 200mm x 100mm x 40-50mm
1
24562
24562.25
... More
Lakhori bricks of size 300mm x 200mm x 40-50mm
1
22079
22079.9
... More
Traditional Brick work in gauged arches in lime mortar 1:1:1 (1 lime : 1 coarse sand : 1 surkhi) and including curing, centering, shuttering, scaffolding, where required and 5.0m lift from plinth level.
-
-
-
... More
Lakhori bricks of Size 200mm x 100mm x 40-50mm
1
27065
27065.5
... More
Lakhori bricks of size 300mm x 200mm x 40-50mm
1
20292
20292.95
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry
40
73
2927.2
... More
Tuman masonry by brick bats/ stones in grinded mortar of Lime Surkhi mortar 1:2/lime sand mortar 1:2 including racking and removal of all old loose plaster and cleaning the wall surface properly as per direction of Engineer In-charge.
1
438
438.9
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes
500
144
72040
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
300
539
161799
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts, tie rods, gratings etc. (when not included in an over all rates) wrought to required form, including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work.
1000
74
74860
... More
Mild Steel or iron work in heavy sizes such as trusses, builts up gates, door frames, records racks, roof works, gates etc. wrought to required form, including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts, nuts, and wastages etc., and their fixing required for completion of the work.
10
8502
85025
... More
2.5 cm (1") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm (3/4") graded approved stone laid in panels finished with 3mm. (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 8cm (3") thick base concrete consisting of cement, local sand and brick ballast 4cm (1.5") gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc. required for proper completion of work. As in item no 601 above but floors shall be 4cm (1 1/2") thick instead of 2.5 cm (1") thick and without base concrete.
1180
498
588525
... More
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand)
5
703
3515.5
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18mm thick
5
462
2311.4
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40mm wide and 4mm thick
1
64
64.06
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 25 mm thick
700
1360
952259
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
128
1644
210453.76
... More
50mm thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.
-
-
-
... More
Red sand stone flooring
174
2707
471105
... More
White sand stone flooring
174
2802
487635
... More
Providing and fixing of precast concrete interlocking tiles of desired shape of M 30 grade manufactured from fully computerized automatic stationery hydraulic vibrio pressed machine and fully computerized automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer in charge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. Tensile splitting strength, abrasion and braking
load etc. as per BS 6717:2001, Grey cement.
-
-
-
... More
60mm thick
15
682
10231.5
... More
80mm thick
30
752
22572
... More
Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge.
65
1730
112508.5
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
50
1005
50253
... More
Providing and laying FULL BODY HOMOGENOUS VITRIFIED TILES of size 800x800mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours, shade and design pattern, in flooring, skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints etc. all complete as specified and as directed by the Engineer-in-Charge.
50
1471
73577.5
... More
Supply and fixing of flush doors, commercial quality conforming of I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplied departmentally.
35mm thick For Single leaf Shutters
200
1805
361000
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia
150
366
55045.5
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick
400
626
250616
... More
Providing and fixing Single Glazing 6mm thick ET 125 series (Saint Gobain) toughened glass complete in all respects as per direction of the Engineer-in-charge. (Required properties Solar factor ≤ 0.45, U-Value ≤ (W/sq.m-K) 5.7W /M2K, Visible light transmittance ≥ 0.30)
50
1767
88397.5
... More
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :
-
-
-
... More
35 mm thick shutters
-
-
-
... More
With ISI marked stainless steel butt hinges of required size
-
-
-
... More
Second class teak wood
150
3508
526216.5
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
-
-
-
... More
With 2nd class teak wood beading 62X19 mm
35
1115
39032.35
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
40
369
14770.8
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
250
370
92675
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
150
67
10134
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 12 mm
50
43
2154
... More
Providing and laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreding cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm×30cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including supply of all material, labour, T&P etc complete for proper completion of work.
247
997
246382.5
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
108
213
23011.56
... More
Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R 2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
110
270
29801.2
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm
50
330
16510
... More
For horizontal surface one coat @1.10 kg per sqm.
200
253
50666
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of SUB HEAD : 14- REPAIRS TO BUILDING 1140 Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
200
236
47236
... More
Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleanin agent as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching / damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineer in-charge (The rate is inclusive of all materials & labours involved except scaffolding)
20
147
2947.4
... More
Khamira colour washing as per traditional practice to prepare the khamira the lime should be slaked for atleast 7-10 days and regularly it should be stirred by adding curd, gugal, and filtered properly before application to the surface.
1
180
180.5
... More
12 mm cement plaster on brick work with cement mortar of mix (All floors) (1:6) 1 cement: 6 coarse sand in single coat on fair side of single or half brick wall including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth no. extra for mixing and additive. Complete as per by directed by Engineer-in- Charge.
1458
158
231311.7
... More
15 mm cement plaster on brick work with cement mortar of mix (All floors) (1:4) 1 cement: 4 coarse sand in single coat .Complete as per by directed by Engineer-in- Charge.
972
210
204304.68
... More
Providing & fixing Chicken wire mesh on joints of RCC & Brick work before plastering complete in the direction of Engineer-in-charge.
100
181
18145
... More
Painting or varnishing on iron works in small areas or new wood wprk with one or cost of ready mixed priming paint and one coat of approved superior quality ready mixed psint of cleasr synthetic varnish including suooly if all materials, labour and T & P etc. required for proper completion of wwork paint to be used should confirm to the S.No. 103 1950. Same as in item No 641 above but for every coat after 1st Coat. Detail of cost for 650 Sft. Area.
300
105
31635
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
-
-
-
... More
New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
1458
126
184524.48
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2430
108
264772.8
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two Coats
972
99
96918.12
... More
Stone Work (Machine cut edges) for wall lining (Veneer Work) upto 10m height, backing filled with grout of average 12mm thick lime mortar 1:2 (1 lime : 2 coarse sand ) including pointing in lime mortar 1:2 (1 lime : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of clamps and pins which shall be paid separately ):
-
-
-
... More
Red sand stone - Exposed face machine cut and table rubbed with rough backing. 30mm thick Stone
40
5247
209916.4
... More
White sand stone - Exposed face machine cut and table rubbed with rough backing. 30mm thick Stone
40
5545
221834
... More
Supply, fabricating, transporting, hoisting and fixing in a position good quality durable Chunar/Mirzapur sandstone/any other type of sandstone in various elements for all level all height. Stone shall be free from cracks, lines, stains, white spots of efflorescence and even in the shade of each element. The stone shall be fine grained and reddish or buff-coloured (locally available of no.1 quality. The work shall be carried out as per attached drawings which different in process of i.E carving(manual/by machine), ornamental work, traditional work, figure work, (any other type, any size), CNC cutting, moulding. The carving and moulding work shall be of very good quality and the drawings provided are very preliminary and amount of carving might change during the final execution. The stones to be fized in line, level and plumb in all respect with the use of brass clamps, pins, dowels, cement slurry with matching pigment and epoxy of Akemi Germany, Anrdex Endura, MYK laticrete or approved make as required and as approved by the Architects. To and fro Transportation charges to CNC establishment included in the above rates.
7
189603
1327226.95
... More
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
-
-
-
... More
Red Sand Stone
97.2
10425
1013402.34
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite stone slab colour black, Cherry/Ruby red
-
-
-
... More
Area of slab upto 0.50 sqm
20
3779
75599.6
... More
Area of slab over 0.50 sqm
20
3586
71728.4
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
50
3129
156453.5
... More
Chemical treatment of sand stone to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks/ joining of gaps/ pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent algal growth and make the stone water proof.
5
901
4507.75
... More
Chemical treatment of marble stone to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks/ joining of gaps/ pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent algal growth and make the stone water proof.
20
969
19399
... More
Horticulture, Landscaping & Street Furniture
-
-
-
... More
Horticulture, Landscaping
-
-
-
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
15
70
1054.05
... More
Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).
10
463
4639.1
... More
Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) :
-
-
-
... More
Screened through sieve of I.S. designation 20 mm
5
228
1143.35
... More
Screened through sieve of I.S. designation 16 mm
3
261
784.68
... More
Screened through sieve of I.S. designation 4.75 mm
1
341
341.81
... More
Fine dressing of the ground
479.17
3
1595.64
... More
Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately).
15
47
706.5
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge..
19
32
624.91
... More
Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).
100
11
1197
... More
Providing and Displaying Marigold(Tagetes) inca hybrid different colour having 30 cm and above ht., with 6 to 8 flowers in bloom & blooming condition, well developed pot should be fully covered with fresh and healthy, foliag and flowers in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
10
58
581.2
... More
Providing and stacking of Euphorbia caracasana (bronze colour leaves) of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in charge.
10
94
944.7
... More
Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge
10
31
314.9
... More
Providing and stacking of Nerium oleander (kaner) of height 45-60 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.
10
26
269.9
... More
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.
-
-
-
... More
1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 25%))
1
5945
5945.49
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
10
7064
70646.1
... More
Providing and laying specified apron for protection against scour complete as per drawing and technical specification as per clause 2503 of MoRT&H Specification.
-
-
-
... More
Providing and laying Pitching on slopes laid over prepared filter
media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications and as per clause 2504 of MoRT&H Specification.
-
-
-
... More
Tree Planter
-
-
-
... More
Providing and laying cement concrete in 1:4:8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 20 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work. All work upto plinth level
1
6032
6032.5
... More
2cm(3'4") thick damp proof coarse with cement and approved coarse sand 1:2 with inclusifn water proofing material as ordered by the Engineer-In-Charge in the proportion as specified by the manufacturers, inlcuding supply of all materials labour and T & P etc. required for proper completion of the work and inlcuding proper curing and shuttering necessary
10
228
2280
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
10
273
2738.2
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
5
588
2941.4
... More
First class bricks in 1:4 in cement and coarse sand of mortar in foundation and plinth including supply of all materials, labour and T& P etc. required for proper completion of work.
1
5006
5006.5
... More
As in item (303 to 307) above but in super-structure, including necessary cutting and moulding of bricks as required and also including honey comb brick work. Thickness of wall not to be less than 1.5 brick thick. Add for extra labour to above items.
0.5
5358
2679
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separetely):
-
-
-
... More
40mm thick
12
5420
65042.04
... More
Street Furniture
-
-
-
... More
Supply, fabricating, transporting, hoisting and fixing in position good quality durable Chunar Sandstone bench in various elements/Lotus at all level all height. Stone shall be free from cracks, lines, stains, white spots of efflorescence and even in shade for each elements. The work shall be carried out as per attached drawings with differant process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), moulding.The carving and molding work shall be of very good quality. The bench should be placed or fixed at the approved location on properly dressed surface. Including all above work as specified and as directed by the Engineer-in-Charge. Chunar Sand Stone Bench
10
22544
225442.1
... More
Supply, fabricating, transporting, hoisting and fixing in position good quality durable Chunar Sandstone Dustbin in various elements/Lotus at all level all height. Stone shall be free from cracks, lines, stains, white spots of efflorescence and even in shade for each elements. The work shall be carried out as per attached drawings with differant process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), moulding.The carving and molding work shall be of very good quality. The dustbin should be placed or fixed at the approved location on properly dressed surface. Including all above work as specified and as directed by the Engineer-in-Charge. Dustbins
2
37959
75919.9
... More
Supply, fabricating, transporting, hoisting and fixing in position good quality durable Chunar Sandstone Shoe Rack in various elements/Lotus at all level all height. Stone shall be free from cracks, lines, stains, white spots of efflorescence and even in shade for each elements. The work shall be carried out as per attached drawings with differant process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), moulding.The carving and molding work shall be of very good quality. The dustbin should be placed or fixed at the approved location on properly dressed surface. Including all above work as specified and as directed by the Engineer-in-Charge. Shoe Rack
1
26948
26948.7
... More
Sanitary Fixtures & CP Brass Fittings
-
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
2
1554
3109.1
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
Kitchen sink with drain board 510x1040 mm, bowl depth 200mm.
1
4998
4998.77
... More
Kitchen sink with out drain board 610x510 mm, bowl depth 200mm.
1
3449
3449.91
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
2
722
1445.1
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
-
-
-
... More
15 mm nominal dia
2
4846
9692.76
... More
Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Semi rigid pipe
-
-
-
... More
40 mm dia.
2
81
162.98
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
2
1122
2245.5
... More
Providing and fixing toilet paper holder :
-
-
-
... More
C.P. brass
2
561
1122.36
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
2
10473
20946.32
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
1
5571
5571.48
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
... More
15 mm nominal bore
2
353
707.74
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15 mm nominal bore
2
401
802
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
2
52
104.46
... More
Providing and fixing white vitreous china wash basin with special fabricated brackets painted white, faucets as required, 32 mm C.P. brass waste. complete in all respects including cutting and making good the walls where required.
-
-
-
... More
Under Counter Wash basin Jaquar Model No.: CNS-WHT-701 , 32 mm CP brass waste Jaquar Model No. ALD-709L130, 15 mm dia CP brass single pillar cock Jaquar Model No. FON-40011 or approved equivalent.
2
2859
5719
... More
Providing and fixing 15mm C.P. copper connecting pipe 450mm long with C.P. brass nuts, washers complete in all respects.(Jaquar Cat No. ALD 803AB or approved equivalent)
2
254
509.2
... More
Providing and fixing C.P. brass 15 mm nominal bore two way bib cock Jaquar Model.FON-40041 or Equivalent.
2
963
1926.6
... More
Providing and fixing C.P. cast brass twin coat hooks fixed to PVC rawl plug with SS screws Jaquar model. No. AKP-35761P or approved equivalent.
1
678
678.3
... More
Providing and fixing health faucet with 1 m long flexible tube and wall hook including all fittings Jaquar model No.ALD-CHR-593N or approved equivalent.
2
3405
6811.5
... More
Providing and fixing of C.P. brass 600 mm size towel rail Jaquar Model. No. AKP-35711P or equivalent fixed with C.P. brass screws complete in all respects.
2
2373
4746.2
... More
Providing and fixing of C.P. brass Soap Dish Make Jaquar Model. AKP-35731P or equivalent) fixed with C.P. brass screws complete in all respects.
2
988
1977.9
... More
Providing and fixing liquid dispenser including all fittings complete.(Jaquar Model-AKP-35735P)
2
1638
3277.5
... More
Providing and fixing Grab Bar Jaquar Model No. AKP-35701P or approved equivalent,Including cutting and making good the walls wherever required
2
1807
3615.7
... More
Providing and fixing vertical storage type hot water heater fixed to wall with anchor bolts & nuts, 15mm CP brass angle stop cock and 15mm CP brass non-return valve complete including making connections with 15mm dia CP connecting pipes on inlet and outlet, suitable length of power cable and 15 amps plug (Venus or approved equivalent).
-
-
-
... More
Capacity 25 Litres Model 25 GV
2
9446
18893.6
... More
Providing and fixing fully automatic Hand dryer Euronics Model-EH 26 NW or equvalant ,including all fittings complete in all respect.
2
15254
30508.3
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc, complete
-
-
-
... More
300x10mm
10
90
908.4
... More
100x10mm
10
45
451.8
... More
Soil, Waste, Vent & Rain Water Pipes
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work up to plinth.
-
-
-
... More
1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size )
1
5501
5501.16
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
5
208
1041.25
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
5
38
190.95
... More
Providing and fixing soil, waste and vent pipes.
-
-
-
... More
100 mm dia.
-
-
-
... More
Hubless Centrifugally cast (spun) Iron pipes epoxi coated inside & outside S&S pipe IS: 15905
10
816
8164.6
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts & nuts complete.
-
-
-
... More
100 mm dia.
-
-
-
... More
Hubless Centrifugally cast (spun) Iron pipes epoxi coated inside & outside S&S pipe IS: 15905
2
396
792.1
... More
Providing and fixing plain bend of required degree.
-
-
-
... More
100 mm dia.
-
-
-
... More
Hubless Centrifugally cast (spun) Iron pipes epoxi coated inside & outside S&S pipe IS: 15905
10
256
2569.6
... More
Providing and fixing heel rest sanitary bend
-
-
-
... More
100 mm dia.
-
-
-
... More
Sand cast iron S&S as per IS - 3989
2
383
766.26
... More
Providing and fixing double equal plain junction of required degree.
-
-
-
... More
100x100x100x100 mm
-
-
-
... More
Hubless Centrifugally cast (spun) Iron pipes epoxi coated inside & outside S&S pipe IS: 15905
0.23
531
122.17
... More
Providing and fixing single equal plain junction of required degree.
-
-
-
... More
100x100x100 mm
-
-
-
... More
Hubless Centrifugally cast (spun) Iron pipes epoxi coated inside & outside S&S pipe IS: 15905
10
406
4060
... More
Providing and fixing terminal guard.
-
-
-
... More
100 mm
-
-
-
... More
Hubless Centrifugally cast (spun) Iron pipes epoxi coated inside & outside S&S pipe IS: 15905
4
298
1194.84
... More
Providing and fixing shieled coupling for Hubless centrifugally cast iron pipes.
-
-
-
... More
100 mm dia.
-
-
-
... More
SS 304 grade coupling with EPDM rubber gasket.
15
301
4525.2
... More
Providing and fixing MS Stay clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter.
-
-
-
... More
100 mm dia
4
97
390.2
... More
Providing and fixing trap of self cleansing design with screwed down or hinged with or without vent arm complete, including cost of cutting and making good the walls and floors.
-
-
-
... More
100 mm inlet and 100 mm outlet
-
-
-
... More
Hubless Centrifugally cast (spun) Iron pipes epoxi coated inside & outside S&S pipe IS: 15905
10
596
5966.9
... More
Painting sand cast iron/ centrifugally cast (spun) soil, waste, vent pipes and fittings with paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work.
-
-
-
... More
100 mm diameter pipe
10
57
578.2
... More
Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc. (Internal work)
-
-
-
... More
32 mm dia. nominal bore
10
465
4657.3
... More
50 mm dia. nominal bore
15
732
10980.15
... More
Painting GI pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.
-
-
-
... More
32 mm dia. nominal bore
20
15
310
... More
50 mm dia. nominal bore
20
21
426
... More
Providing and fixing uPVC agricultural pipes conforming to IS:4985 (6 kg/sqcm) including all fittings, e.g. couplings, tees, bends, reducers and screwed adoptors jointing with solvent cement joint as per manufacturers' recommendations. [for Rain Water Pipes]
-
-
-
... More
160 mm OD
10
1464
14649
... More
Providing and fixing of GI clamps with EPDM rubber lining Zinc plated for support of vertical soil, waste, vent and rain water pipes, embedded in walls with anchor fastner etc. including cost of cutting holes and making good the walls complete in all respects.
-
-
-
... More
For 100 mm dia Pipe
12
275
3306
... More
For 160 mm OD Pipe
15
321
4816.5
... More
Providing and fixing cast brass clean out plug with suitable insert keys for opening, male threaded joint with GI threaded socket caulked to CI soil pipe including cost of lead Joint.
-
-
-
... More
100 mm dia
5
1403
7015.75
... More
150 mm dia
1
2558
2558.35
... More
Providing and fixing in position 100x50 mm dia GI reducing elbow including fix to floor with cement mortar.
5
1214
6070.5
... More
Providing and fixing in position 125x125 mm stainless steel grating for floor trap/floor drain including fix to floor with cement mortar.
5
225
1125.75
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Concealed work including cutting chases and making good the walls etc.
-
-
-
... More
20 mm nominal outer dia .Pipes.
20
375
7507.6
... More
25 mm nominal outer dia .Pipes.
15
437
6569.7
... More
32 mm nominal outer dia .Pipes.
10
516
5162.2
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
... More
Internal work - Exposed on wall
-
-
-
... More
32 mm dia nominal bore
10
465
4657.3
... More
40 mm dia nominal bore
10
566
5669.1
... More
50 mm dia nominal bore
10
732
7320.1
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
-
-
-
... More
32 mm dia nominal bore
10
377
3772.6
... More
40 mm dia nominal bore
10
430
4308.6
... More
50 mm dia nominal bore
15
532
7982.55
... More
65 mm dia nominal bore
15
626
9390.75
... More
80 mm dia nominal bore
10
727
7273.7
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
1391
5565.32
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
7584
7584.67
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
... More
32 mm dia nominal bore
10
25
253.8
... More
40 mm dia nominal bore
10
29
297.8
... More
50 mm dia nominal bore
10
35
356.1
... More
65 mm dia. nominal bore
15
39
586.5
... More
100 mm dia. nominal bore
10
60
601.2
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
... More
25 mm dia nominal bore
15
12
192.15
... More
32 mm dia nominal bore
10
15
155
... More
40 mm dia nominal bore
10
17
176.3
... More
50 mm dia nominal bore
15
21
319.5
... More
65 mm dia nominal bore
15
26
396.45
... More
80 mm dia nominal bore
30
30
921.6
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :
-
-
-
... More
25 mm dia nominal bore
15
112
1683.15
... More
32 mm dia nominal bore
10
115
1151.4
... More
40 mm diameter pipe
10
116
1166.1
... More
50 mm diameter pipe
15
120
1814.55
... More
65 mm diameter pipe
15
190
2864.1
... More
80 mm diameter pipe
15
196
2951.55
... More
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) :
-
-
-
... More
80 mm dia nominal bore
1
2533
2533.01
... More
Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 :
-
-
-
... More
80 mm dia nominal bore
1
3228
3228.36
... More
Providing, laying and Jointing G.I. "B class" pipes and fittings conforming to IS: 1239 (Medium class) with fittings, union and clamps including cutting holes in wall, makes chases in wall and making good the same in cement mortar 1:2 (1cement : 2 coarse sand) complete in all respects for internal works including pipe supports with galvanised GI. slotted angle iron, GI clamps, spacers as required and making good wherever required. (For Vertical in Shafts & Terrace only)
-
-
-
... More
Internal Work - Exposed on Wall
-
-
-
... More
65 mm dia. nominal bore
15
576
8651.25
... More
100 mm dia. nominal bore
15
1069
16045.8
... More
Providing and fixing forged brass ball valve of brass body with hard chrome plated steel ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete in all respects.
-
-
-
... More
20 mm nominal bore
2
360
720.6
... More
25 mm nominal bore
5
570
2852.35
... More
32 mm nominal bore
5
953
4765.55
... More
40 mm nominal bore
3
1388
4166.46
... More
50 mm nominal bore
2
1993
3987
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
65 mm dia
3
3003
9011.61
... More
80 mm dia
2
3478
6957.36
... More
Providing and fixing Thermoflex or Kaiflex thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification.
-
-
-
... More
6 mm thick (Concealed Pipes)
-
-
-
... More
For 20 mm dia Pipe
20
80
1615
... More
Providing and fixing forged brass single acting air release valve with screwed inlet 25 mm dia.
2
864
1729
... More
Providing and fixing threaded end brass digital water meter complete in all respect.
-
-
-
... More
32 mm dia.
2
4113
8227
... More
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI:12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipe. The base support i/c fittings & fixtures for tank shall be paid separately.
5000
7
38400
... More
Sewerage System
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil
10
123
1239.4
... More
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m.
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.
25
245
6147.25
... More
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth upto 1.5 metre).
-
-
-
... More
Pipes, cables etc, exceeding 80mm dia but not exceeding 300mm dia
15
509
7643.7
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
10
136
1368.6
... More
Extra for every additional lift of 1.5m or part thereof in:
-
-
-
... More
All kinds of soil (Manhole)
5
88
442.7
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per standard design.
-
-
-
... More
150 mm diameter
5
823
4119.15
... More
200 mm diameter
10
960
9604.1
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
... More
180x150 mm size P type
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
1956
5869.8
... More
Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete.
-
-
-
... More
150 mm dia.
5
429
2147.1
... More
200 mm dia.
10
668
6689.2
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
8917
8917.04
... More
Extra for depth for manholes :
-
-
-
... More
Size 90x80 cm
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
6162
6162.34
... More
Constructing brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand : 6 graded 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design:
-
-
-
... More
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
8885
8885.23
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
5300
5300.97
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
10
386
3866.2
... More
Storm Water Drainage for Landscaping and Pathway work
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
All kinds of soil
50
123
6197
... More
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m.
-
-
-
... More
All kinds of soil
-
-
-
... More
Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.
30
245
7376.7
... More
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth upto 1.5 metre).
-
-
-
... More
Pipes, cables etc, exceeding 80mm dia but not exceeding 300mm dia
20
509
10191.6
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
30
136
4105.8
... More
Extra for every additional lift of 1.5m or part thereof in:
-
-
-
... More
All kinds of soil (Manhole)
20
88
1770.8
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) up to haunches of S.W/RCC pipes including bed concrete as per standard design.
-
-
-
... More
250 mm diameter
20
710
14201
... More
300 mm diameter
10
819
8192.9
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
250 mm dia. R.C.C. pipe
20
628
12565.8
... More
300 mm dia. R.C.C. pipe
10
694
6942.7
... More
Constructing brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1 :3:6 mix (1 cement : 3 coarse sand : 6 graded 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design:
-
-
-
... More
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter confirming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
8885
8885.23
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
5300
5300.97
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
5
386
1933.1
... More
Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
4160
4160.1
... More
Extra for depth beyond 45 cm of brick masonry chamber
-
-
-
... More
For 455x610 mm size
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
4271
4271.2
... More
Submersible
-
-
-
... More
Submersible Pump include the rate of electrical control panels complete with all accessories &controls, all Electrical/Mechanical items as required to operate the system automatic/manual.
-
-
-
... More
c) Level Controller with sufficient nos. of low / high level alarms, contacts with electrodes and control wiring for the automatic operation of water supply pumps, Submersible Sump Pumps, to achieve the functional requirement shall be provided. Control wiring between these pumps and water tanks shall be provided.Domestic water pumps must start at low water level in under ground domestic water tank & stop at high level in that water tank. Dry running protection shall be provided for all the pumps.Sequencing shall be provided for each set of pumps.
-
-
-
... More
Providing and fixing of Submersible Pump of approved make and quality at the site on locations as per instructed by Architect or Engineer on Site
1
190000
190000
... More
Supply and Fixing of Aquaguard Green Purechill 120 PSS RO+UV Water Cooler GWPDG12RU00000
2
115140
230280
... More
Supply and Fixing of Aquaguard 500lph Skid Mounted RO Purification Plant with TFC Membrane, GWPDWP500LPHRO
1
335825
335825
... More
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5sq. mm FRLS PVC insulated copper conductor single core cable insurface /recessemedium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq. mm FRLS PVC insulated copper conductor single core cable etc.
Group B
225
861
193907.25
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amp modular socket outlet and 5/6 amp modular switch connections etc. as required.
60
347
20866.8
... More
Wiring for light / power plug with 2 x 1.50 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 1.50sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.
855
169
145247.4
... More
Wiring for light / power plug with 2 x 2.50 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 2.50sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.
850
200
170425
... More
Wiring for light / power plug with 2 x 4.00 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 4.00 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.
840
243
204556.8
... More
Wiring for light / power plug with 2 x 6.00 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 6.00 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.
410
320
131232.8
... More
Wiring for light / power plug with 4 x 10.00 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 2 No. 6.00 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.
350
732
256462.5
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 WAY SPN
4
1687
6751.52
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4WAY (4+12) DOUBLE DOOR
3
2982
8948.34
... More
Providing and fixing 25 mm x 5 mm G I strip on surface or in recess for connections etc. as required.
30
104
3149.7
... More
Wiring Invertor point for light / Fan/Plug point with 1.5 mm Cu wire.
152
168
25543.6
... More
50 sq mm. 3.5 Core
150
626
93954
... More
S&F of 40 Amp. DP MCB (10 KA) C Curve Cat-A
5
1502
7511.25
... More
S/F of 6 Amp to 32 Amp MCB (10 KA) Cat.-A
76
331
25156
... More
S/F of 63 Amp FP MCB (10 KA) Cat.-A
3
2915
8746.17
... More
supply and fixing of recess /surface/pedent mounting round 10 to 15 watts LED Down Lighter having powder coated die cast aluminium housing with heat sink diffuser reflector and driver set complete in all respect.Cat-AAA
70
1718
120307.6
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light fitting including tube On surface complete in all respect.Cat-AAA
70
1514
106048.6
... More
Supply, installation, testing & comissioning of In-ground luminaire, drive-over for pressure loads to 1,000 kg (~10 kN). Location luminaire. LED, 1.6 W luminaireconnected wattage, 24 V DC, luminaire luminous flux 40lm to 54 lm, colour temperature 3000 K. Colour rendering index (CRI) 80. With replaceable LED module with overheating protection and an expected service life of at least 50,000 operating hours. 20 years warranty of availability of LED module and wear parts. Without power supply unit. Protection class IP 68 20 m, safety class III. Luminaire made stainless steel, Steel grade no. 1.4301. Installation sleeve made of polyamide. Safety glass, frosted. With fixed waterproof connecting cable 05RN8-F 2 x 1 qmm, length 3 m, with integral water stop. Luminaire diameter 70mm to 75 mm, installation depth 70mm to 80 mm. Recessed opening ÿ 70 mm. The product should be BIS certified.
2
37851
75703.6
... More
S&F of Power plug with 20 Amp/250 volt flush type modular switch and 5 pin 20A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work.
35
795
27848.8
... More
Supply & fixing of Electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper copmletion of work to the satisfaction of Engineer in charge of work.
36
658
23694.84
... More
S/F of hexagonal/Round G.P. fan box of approved make made up of 1.0 mm thick ISI Marked G.P. sheet spot welded Four to Eight holes of 25.4 mm for pipe entry og the box. Holes should be semi-shuttered type with 0.5 mm G.P. sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S. Bar x 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of the work.
36
190
6874.56
... More
supply and fixing of 200 Amp kit kat fuse with all materil compete in all respect,
1
11875
11875
... More
S/f of ceiling fan ISI Marked 1200 mm sweep. Usha / Crompton/Bajaj/Havells make
36
2090
75240
... More
S/F of light duity exhaust fan 12" dia Bajaj / Usha / Cromption/Havells make. Double ball bears. /
6
2090
12540
... More
supply and fixing of 200 Amp four pole change over switch on 50mm X 6mm angle iron frame incluing the cost of labour, T&P painting and other material required for proper completion of the work as direction and satisfaction of Engineer in chaege.
1
17874
17874.25
... More
S/F of call bell of approved make on polished MDFEG/ Teak ply board including making connections etc. complete in all respect.
1
222
222.79
... More
S&F of A.C plug with 32 Amp/250 volt flush type modular Type 32 Amp MCB and 3 pin 32A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work.
10
2062
20624.1
... More
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm In all respect.
2
12781
25563.74
... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting,M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release ) Switches Complete and instrument chamber etc . complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.B43 INCOMING, 200 AMP.FP MCCB 36 KA= 1 Nos OUTGOING.63 AMP.FP MCCB 36 KA = 4 Nos
1
302321
302321.87
... More
S&L of 1800mm X 900mm X 12mm thick chequred rubber matting of tested quality.
1
3246
3246.39
... More
supply and fixing of fire extinguisher, ABC Type 6 kg capacity (ISI Marked IS: 15683 & TAC Approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
8
11585
92681.28
... More
supply and fixing of 10 watt LED BLUB in all complete.
80
199
15960
... More
Water Point - 3000 x 3000 mm
-
-
-
... More
Earth Works
-
-
-
... More
Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.
11.5
118
1365.63
... More
As in above item no.251 but excavation in soil mixed with mooram / single / kankar requiring the use of special T & P such as pickaxes, subbals etc.
11.5
142
1638.75
... More
Sand filling in plinth excluding supply of necessary quantity of sand from a distance not exceeding 8km. From the site of work and including watering, ramming, dressing etc. Rate to include cost of materials, labour and T& P etc. required for proper completion of the work.
4.47
712
3184.88
... More
Plain Cement Concrete Work
-
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
All works upto plinth level:
-
-
-
... More
Concrete of M10 grade with minimum cement content of 220 kg/cum
1.39
6169
8575.1
... More
Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work.
All work upto plinth level
0.61
7457
4549.08
... More
2cm(3'4") thick damp proof coarse with cement and approved coarse sand 1:2 with inclusifn water proofing material as ordered by the Engineer-In-Charge in the proportion as specified by the manufacturers, inlcuding supply of all materials labour and T & P etc. required for proper completion of the work and inlcuding proper curing and shuttering necessary
2.34
228
533.52
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
2.34
102
238.8
... More
Providing & injecting chemical emulsion for Preconstructional and Postconstructional anti-termite treatment and creating a chemical barrier under & alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall & floor along the external perimeter of building expansion joints surrounding of pipes & coduits etc.complete plinth area of the building at ground floor only shall be measured as per I.S.63/3( part II 1981 ) Aldrine emlsifiable concentrate or any other approved material such as Htrachlore or Chlordance will be used . The rate of application of chemical emulsion shall be as follows: (I) Treatment for masonary & foundation 5litres/ sqm.
(II) Back fill in immediate contract with foundation 7.5 litres / sqm
(III) Treatment of top surface of plinth filling 5 litres/sqm . (V) Treatment of soil along external perimeter of building 7.50 litres/sqm.
(VI) Treatment of soil under Apron along external perimeter 5litres/sqm
13.94
180
2516.17
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
5.08
523
2657.86
... More
Reinforced Cement Concrete Work
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
6.72
273
1840.07
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1.52
588
894.19
... More
Suspended floors, roofs, landings, balconies and access platform
6.45
647
4177.41
... More
Shelves (Cast in situ)
1.14
647
738.33
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
8.56
514
4401.47
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
12.88
671
8645.44
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
-
-
-
... More
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
Note :- The above item shall be used judiciously where specified quality of Fly Ash is available for mixing in concrete. Also, the guidelines issued by CDO, CPWD, vide circular no. CDO/SE(RR)/Fly Ash (Main)/102 dated 9th April 2009 shall be followed in such cases.
-
-
-
... More
All works upto plinth level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
2.85
6636
18914.57
... More
All works above plinth level upto floor V level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
2.78
6884
19139.61
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete for proper completion of the work and including supply of steel its wastage. Thermo-Mechanically Treated bars of grade Fe-500D or more. ANALYSED AS PER SAIL RATE JULY ,21
749.63
82
61836.98
... More
Brick Work
-
-
-
... More
First Class brick work in 1:6 cement and fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.
3.66
4560
16689.6
... More
As in Item Class ( 303 to 307) above in super structure including necessary cutting and moulding of bricks as required and also inlcuding honey comb brick work. Add for extra labour to above item.
4.99
4911
24508.39
... More
As in Item (309) above but for wall of one brick thick. Add for extra Labor.
1.14
4855
5535.21
... More
Wood and PVC Work
-
-
-
... More
Supply and fixing of flush doors, commercial quality conforming of I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplied departmentally.
35mm thick
-
-
-
... More
For Single leaf Shutters
0.9
1805
1624.5
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
-
-
-
... More
1.0 mm thick
2.52
626
1578.88
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
-
-
-
... More
With 2nd class teak wood beading 62X19 mm
1.13
1115
1260.19
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
6
369
2215.62
... More
Wooden Door Fittings
-
-
-
... More
Providing and fixing bright finished brass handles with screws etc.
complete:
-
-
-
... More
125mm
2
179
358.42
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with
stainless steel screws etc. complete :
-
-
-
... More
125x64x1.90mm
4
82
330.12
... More
Providing and Fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing.
-
-
-
... More
Rectangular shape 1500x450 mm
1
1461
1461.44
... More
Steel Work
-
-
-
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
-
-
-
... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
60
136
8178
... More
Aluminium Work
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)
30
370
11121
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
-
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
6.5
67
439.14
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm
3
43
129.24
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm
1.52
3586
5451.36
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
5.08
356
1812.39
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18mm thick
2.03
462
938.43
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40mm wide and 4mm thick
10.16
64
650.85
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
6.45
1360
8774.39
... More
12 mm cement plaster on brick work with cement mortar of mix (All floors) (1:6) 1 cement: 6 coarse sand in single coat on fair side of single or half brick wall including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth no. extra for mixing and additive. Complete as per by directed by Engineer-in- Charge.
44.55
158
7067.86
... More
15 mm cement plaster on brick work with cement mortar of mix (All floors) (1:4) 1 cement: 4 coarse sand in single coat .Complete as per by directed by Engineer-in- Charge.
31.5
210
6620.99
... More
Providing & fixing Chicken wire mesh on joints of RCC & Brick work before plastering complete in the direction of Engineer-in-charge.
30.48
181
5530.6
... More
Painting or varnishing on iron works in small areas or new wood wprk with one or cost of ready mixed priming paint and one coat of approved superior quality ready mixed psint of cleasr synthetic varnish including suooly if all materials, labour and T & P etc. required for proper completion of wwork paint to be used should confirm to the S.No. 103 1950. Same as in item No 641 above but for every coat after 1st Coat. Detail of cost for 650 Sft. Area.
4.52
105
476.63
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
-
-
-
... More
New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
44.55
126
5638.25
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
76.05
108
8286.41
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two Coats
31.5
99
3140.87
... More
Providing and laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreding cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm×30cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including supply of all material, labour, T&P etc complete for proper completion of work.
9
997
8977.5
... More
Grading roof for water proofing treatment with
-
-
-
... More
Cement mortar 1:4 (1cement : 4 coarse sand)
0.9
10582
9524.16
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
-
-
-
... More
In 75x75 mm deep chase
17
213
3622.19
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
-
-
-
... More
White sand stone - Exposed face machine cut and table rubbed with rough backing.
-
-
-
... More
30mm thick
27
5545
149737.95
... More
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
40
498
19953.2
... More
Beam: Roof
-
-
-
... More
Long wall
7.5
-
2.18
... More
Short wall
5
-
1.45
... More
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
30
30
919.5
... More
40mm thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.
-
-
-
... More
Red sand stone flooring
7.76
2707
21010.2
... More
White sand stone flooring
7.76
2802
21747.4
... More
Supply, fabricating, transporting, hoisting and fixing in a position good quality durable Chunar/Mirzapur sandstone/any other type of sandstone in various elements for all level all height. Stone shall be free from cracks, lines, stains, white spots of efflorescence and even in the shade of each element. The stone shall be fine grained and reddish or buff-coloured (locally available of no.1 quality. The work shall be carried out as per attached drawings which different in process of i.E carving(manual/by machine), ornamental work, traditional work, figure work, (any other type, any size), CNC cutting, moulding. The carving and moulding work shall be of very good quality and the drawings provided are very preliminary and amount of carving might change during the final execution. The stones to be fized in line, level and plumb in all respect with the use of brass clamps, pins, dowels, cement slurry with matching pigment and epoxy of Akemi Germany, Anrdex Endura, MYK laticrete or approved make as required and as approved by the Architects. To and fro Transportation charges to CNC establishment included in the above rates.
0.4
189603
75841.54
... More
Providing and fixing luggage racks of approved quality , brand and make Cloak Room
1
14823
14823.8
... More
Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.
44.09
118
5235.69
... More
As in above item no.251 but excavation in soil mixed with mooram / single / kankar requiring the use of special T & P such as pickaxes, subbals etc.
44.09
142
6282.83
... More
Sand filling in plinth excluding supply of necessary quantity of sand from a distance not exceeding 8km. From the site of work and including watering, ramming, dressing etc. Rate to include cost of materials, labour and T& P etc. required for proper completion of the work.
9.47
712
6747.38
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
Concrete of M10 grade with minimum cement content of 220 kg/cum
5.62
6169
34670.57
... More
Providing and laying cement concrete in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work.
All work upto plinth level
3.03
7457
22596.23
... More
2cm(3'4") thick damp proof coarse with cement and approved coarse sand 1:2 with inclusifn water proofing material as ordered by the Engineer-In-Charge in the proportion as specified by the manufacturers, inlcuding supply of all materials labour and T & P etc. required for proper completion of the work and inlcuding proper curing and shuttering necessary
11.61
228
2647.08
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
11.61
102
1184.8
... More
Providing & injecting chemical emulsion for Preconstructional and Postconstructional anti-termite treatment and creating a chemical barrier under & alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall & floor along the external perimeter of building expansion joints surrounding of pipes & coduits etc.complete plinth area of the building at ground floor only shall be measured as per I.S.63/3( part II 1981 ) Aldrine emlsifiable concentrate or any other approved material such as Htrachlore or Chlordance will be used . The rate of application of chemical emulsion shall be as follows: (I) Treatment for masonary & foundation 5litres/ sqm.
(II) Back fill in immediate contract with foundation 7.5 litres / sqm
(III) Treatment of top surface of plinth filling 5 litres/sqm . (V) Treatment of soil along external perimeter of building 7.50 litres/sqm.
(VI) Treatment of soil under Apron along external perimeter 5litres/sqm
56.2
180
10144.1
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
25.23
523
13200.34
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
31.2
273
8543.18
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
7.57
588
4453.28
... More
Suspended floors, roofs, landings, balconies and access platform
75
647
48574.5
... More
Shelves (Cast in situ)
7.85
647
5084.13
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
46.5
514
23909.84
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
86.78
671
58249.34
... More
Weather shade, chajjas, corbels etc. Including edges.
24.48
664
16257.41
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
-
-
-
... More
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
Note :- The above item shall be used judiciously where specified quality of Fly Ash is available for mixing in concrete. Also, the guidelines issued by CDO, CPWD, vide circular no. CDO/SE(RR)/Fly Ash (Main)/102 dated 9th April 2009 shall be followed in such cases.
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
12.98
6636
86144.24
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
1.34
6742
9034.4
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
20.07
6884
138176.93
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
3.5
6990
24466.51
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete for proper completion of the work and including supply of steel its wastage. Thermo-Mechanically Treated bars of grade Fe-500D or more. ANALYSED AS PER SAIL RATE JULY ,21
4614.6
82
380658.35
... More
First Class brick work in 1:6 cement and fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.
14.7
4560
67032
... More
As in Item Class ( 303 to 307) above in super structure including necessary cutting and moulding of bricks as required and also inlcuding honey comb brick work. Add for extra labour to above item.
34.82
4911
171018.43
... More
As in Item (309) above but for wall of one brick thick. Add for extra Labor.
7.95
4855
38600.83
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry
3.18
73
232.71
... More
Supply and fixing of flush doors, commercial quality conforming of I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplied departmentally.
35mm thick For Single leaf Shutters
36.54
1805
65954.7
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick
36.54
626
22893.77
... More
Providing and fixing Single Glazing 6mm thick ET 125 series (Saint Gobain) toughened glass complete in all respects as per direction of the Engineer-in-charge. (Required properties Solar factor ≤ 0.45, U-Value ≤ (W/sq.m-K) 5.7W /M2K, Visible light transmittance ≥ 0.30)
2.88
1767
5091.7
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm
2.88
1115
3211.8
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
18
369
6646.86
... More
Providing and fixing bright finished brass handles with screws etc.
complete:
-
-
-
... More
125mm
8
179
1433.68
... More
100mm
28
163
4588.64
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges with
stainless steel screws etc. complete :
-
-
-
... More
125x64x1.90mm
12
82
990.36
... More
100x58x1.90mm
42
74
3140.76
... More
Providing and Fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 1500x450 mm
4
1461
5845.76
... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
470
136
64061
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
540
370
200178
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)
-
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
90.9
67
6141.2
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type Fastener with threaded dia 12 mm
54
43
2326.32
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm
6.65
3586
23849.69
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
11.08
356
3953.01
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18mm thick
18.9
462
8737.09
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40mm wide and 4mm thick
64.08
64
4104.96
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
35
1360
47612.95
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
6.3
1644
10358.27
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
63.92
1005
64243.44
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
31.96
2225
71114.52
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent
31.96
3129
100005.08
... More
Providing and laying FULL BODY HOMOGENOUS VITRIFIED TILES of size 800x800mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours, shade and design pattern, in flooring, skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints etc. all complete as specified and as directed by the Engineer-in-Charge.
328.92
1471
484022.23
... More
12 mm cement plaster on brick work with cement mortar of mix (All floors) (1:6) 1 cement: 6 coarse sand in single coat on fair side of single or half brick wall including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth no. extra for mixing and additive. Complete as per by directed by Engineer-in- Charge.
242.62
158
38491.66
... More
15 mm cement plaster on brick work with cement mortar of mix (All floors) (1:4) 1 cement: 4 coarse sand in single coat .Complete as per by directed by Engineer-in- Charge.
150
210
31528.5
... More
Providing & fixing Chicken wire mesh on joints of RCC & Brick work before plastering complete in the direction of Engineer-in-charge.
30
181
5443.5
... More
Painting or varnishing on iron works in small areas or new wood wprk with one or cost of ready mixed priming paint and one coat of approved superior quality ready mixed psint of cleasr synthetic varnish including suooly if all materials, labour and T & P etc. required for proper completion of wwork paint to be used should confirm to the S.No. 103 1950. Same as in item No 641 above but for every coat after 1st Coat. Detail of cost for 650 Sft. Area.
16.5
105
1739.93
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
96.22
126
12177.6
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
96.22
108
10484.13
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two Coats
52
99
5184.92
... More
Providing and laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreding cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm×30cm and side wall parapet shall be mono tythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including supply of all material, labour, T&P etc complete for proper completion of work. Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
75
997
74812.5
... More
The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
28.5
430
12279.51
... More
Cement mortar 1:4 (1cement : 4 coarse sand)
7.5
10582
79368
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
70
213
14914.9
... More
Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R 2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
300
270
81276
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
... More
For vertical surface two coats @ 0.70 kg per sqm
29.2
330
9641.84
... More
For horizontal surface one coat @1.10 kg per sqm.
19.8
253
5015.93
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
63.92
946
60512.42
... More
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
63.92
1328
84932.42
... More
Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/mK.
63.92
1506
96322.97
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - Exposed face machine cut and table rubbed with rough backing.
-
-
-
... More
40mm thick Stone
48
5420
260168.16
... More
30mm thick Stone
2
5247
10495.82
... More
White sand stone - Exposed face machine cut and table rubbed with rough backing.
-
-
-
... More
40mm thick Stone
48
5816
279210.24
... More
30mm thick
2
5545
11091.7
... More
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
100
498
49883
... More
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.
100
30
3065
... More
Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in :
-
-
-
... More
Circular or polygonal pillars
3.15
7475
23547.7
... More
Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m.
2.1
2022
4246.47
... More
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
-
-
-
... More
Red Sand Stone
15.3
10425
159517.04
... More
White Sand Stone
2.25
10469
23556.76
... More
40mm thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.
-
-
-
... More
Red sand stone flooring
30.19
2707
81739.43
... More
White sand stone flooring
30.19
2802
84607.48
... More
Supply, fabricating, transporting, hoisting and fixing in a position good quality durable Chunar/Mirzapur sandstone/any other type of sandstone in various elements for all level all height. Stone shall be free from cracks, lines, stains, white spots of efflorescence and even in the shade of each element. The stone shall be fine grained and reddish or buff-coloured (locally available of no.1 quality. The work shall be carried out as per attached drawings which different in process of i.E carving(manual/by machine), ornamental work, traditional work, figure work, (any other type, any size), CNC cutting, moulding. The carving and moulding work shall be of very good quality and the drawings provided are very preliminary and amount of carving might change during the final execution. The stones to be fized in line, level and plumb in all respect with the use of brass clamps, pins, dowels, cement slurry with matching pigment and epoxy of Akemi Germany, Anrdex Endura, MYK laticrete or approved make as required and as approved by the Architects. To and fro Transportation charges to CNC establishment included in the above rates.
0.96
189603
182019.7
... More
GST Extra as per Appllicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements