Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Eprocure
Opening Date18 Oct 2021
Closing Date25 Oct 2021
Tender AmountRefer Documents
Costs
EMD
₹ 65,000Document Cost
₹ 8,260Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_UPPRC_615448_2Bid Award Id
ViewTender No
22/2021-22/PM/Basti/E-tenderTender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Local sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.
11.18
-
826.5
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
16.87
-
5225
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or chordancewill be used. The rate of application of chemical emulsion shallbe as follows : (1)Treatment for masonary & foundation 5 liters per/100 sqm. (2) Back fill in immediate contact with foundation 7.5 liters/100sqm (3) Treatment of top surface of plinth filling 5 liters/100 sqm (4)Treatment junction of wall and the floor 7.5 liters /100 sqm (5)Treatment of soil along external perimeter of building 7.5liters/100sqm. (6) Treatment of soil under apron along external perimter 5 liters/100 sqm.
91.72
-
266
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:2;4,(1cement :6 aggregate) along with synthetic triangular fibre cut of lenth 12mm specific gravity 1.34 dosage @ 900gms/cum.(Recorn3s of Relience industries ltd.)in lintel of doors & windows ixcluding supply of reinforcement & its bending the same with 24 B WG binding wire & necessarry centering & shuttering etc & also including supply of all materials labours & tool & plants etc required for proper completion of work strength the of the concrete shall no be less than M-15
4.51
-
7338.75
As in item 6 above but for slabs (Using 1:1.5:3 Mix concrete)
14.55
-
8350.5
As in item 6 above but for lighter beam (Using 1:1.5:3 Mix concrete)
0.33
-
8787.5
First Class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
38.38
-
4227.5
Same as in item no.7 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms.
34.91
-
4683.5
Same as in item no.8 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below.
3.71
-
5058.75
Providing and laying damp proof coarse 25 mm thick with cement concrete 1:1.5:3 (1 cement:1.5coarse sand :3 graded stone aggregates 10 mm nominal size) and curing complete.
13.99
-
280.25
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
13.99
-
87.21
Providing and laying "Brick koba" 12mm thick laid with M-150 class brick bal coba 7.50 cm thick with the gape of 15mm to each other , over 20mm thick base of cement morter 1:4 cement and coarse sand mixed with the water proofing compounnd spreading cement slurry mixed with aerelic cement concrete water proofing compoundin 1:4 cement and coarse and mortar finished smooth and top mashed false square 35cmX30cm and side wall parpet shall be mono tythic plaster wall upto 30cm higher and juntion corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @2% by weight & including S/o all material, labour,T & P.etc complete for proper completion of work.
96.55
-
807.5
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 32mm thick including ISI marked Stainless Steel butt hinges with necessary screws SINGLE LEAF 32 mm thick
10.5
-
1330
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (PWD 502)
-
-
-
Fabrication of hold fast for door chaukhats and windows.
44.4
-
61.75
Fabrication of grill / stair case railing.
540
-
66.5
Fabrication of Z-section steel windows.
648
-
53.2
Angle iron chaukhats (40*40*5)
67.6
-
61.75
Supply and fixing galavanized mosquitos proof heavy quality iron wire gauge of expended metal heavy quality over windows and including supply of teak wood batten 8cmX1cm (3" X 3/8")/flat iron 25mm X 4mm and including supply of necessary screws all material labour and tools and plants etc required for proper completion of work.
21.6
-
771.4
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (PWD- 504)
19.37
-
5130
Fixing of steel or wooden chaukhats in position.
-
-
-
(a) Door chaukhats
5
-
85.5
(b) Window chaukhats
11
-
71.25
12 mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including brick wall level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive. (1) 1 cement : 6 fine sand
195.14
-
112.1
15 mm cement plaster on rough side of single or half brick wall of mix : (1 cement: 6 fine sand)
228.17
-
128.25
Making grooves 10 to 12 mm widex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required.
93.44
-
24.7
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
83.04
-
64.6
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement(25 mm thickfloor).
40.61
-
228
20 mm thick cement plaster in dado/ skirting in 1:3 consistingof onepart of cement and 2 partsof aprovedcoarse sand laid inpanels,finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.
5.49
-
199.5
Supply & fixing 6 mm thick approved China white/coloured glazed tiles in flooring or dodo laid with 1:3 cement and approved coarse sand mortar finished and joined with white cement slurry and pigment & polishing complete including supply of all materails, labour and T&P etc. required for proper completion of the work (size of tiles upto 300x300mm)
7.06
-
902.5
Providing & laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600mm x 600mm size in flooring or skirting laid with 1:3 cemen morter (1 cement: 3Coarse sand) finishing with cement slurry & polishin complete i/c supply of all materials, labour T & P required for proper completion of work.
74.52
-
1154.25
Providing & laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600mm x 600mm size in flooring or skirting laid with 1:3 cemen morter (1 cement: 3Coarse sand) finishing with cement slurry & polishin complete i/c supply of all materials, labour T & P required for proper completion of work.
12.7
-
1154.25
Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
99.1
-
90.73
Same as item 26 above but on new wood surface.
21
-
90.73
Finishing walls with acrylic smooth extarior paint of required shed. Two or more coat applied @1.67ltr/10sqm. Over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
195.14
-
85.5
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. (wall)
228.17
-
66.5
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. (ceiling)
97.37
-
66.5
Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
520.68
-
107.35
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
21.6
-
703.41
Providing and fixing glass strips of 3.15mm (1/8") thickness in joints of floors and skirtings at the time of laying floors flush with the floor level including all material labour, tools & plants etc. complete
243.65
-
16.15
Providing and fixing stainless steel sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm
5
-
332.5
Providing and fixing stainless steel tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm
5
-
190
Providing and fixing stainless steel handles, ISImarked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screw setc. complete : 100 mm
10
-
237.5
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
9.33
-
3895
INTERNAL ELECTRIFICATION WITH TOILET
-
-
-
Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.
24
-
579.5
Same as item No.(41) but for fan and light duty exhaust fan.
9
-
637.45
Same as item No.(41) but for 5 Amp plug point with piano type switch and socket etc.
9
-
310.65
Supply and wiring of submain 1 number 2.5 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.
60
-
141.55
Sq.mmWith 1X4 sq.mm. Earth wire in 25 mm dia conduit. Sq.mm. In 25 mm dia conduit.
45
-
193.8
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
7
-
133
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc.
2
-
185.25
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work.
7
-
142.5
Supply & fixing of L.E.D. tube light batten fitting suitable for upto 1X22 watt L.E.D. tube light on surface complete in all respects.
18
-
589
Supply & fixing of batten/ angle holder complete in all respect.
10
-
57
supply and erection of AC 1400mm Sweep 230/250 Volts, 50 Hz ceilling with regulater standar down rod, blades including conection etc. complete as required.
7
-
1900
Supply of AC 230/250 volts 50 HZ exhaust fans including providing bolts, mounting frame and cther accessories etc.
2
-
2090
Supply & fixing of L.E.D. light Bulb 9 watt
6
-
237.5
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 600x480x200 mm. size
1
-
617.5
Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 600x480x200 mm. size
1
-
1634
Supply and fixing of flush/surface mounting distribution boards complete in all respects. 4 Way TPN
1
-
2926
Supply fixing of 240 volts ' L' series miniature circuit breaker 9 K.A/ . In existing MCB, DB complete with connections as required. 32 amp
3
-
247
Supply fixing of 63 amp S.P Isolator
1
-
266
Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer.
8
-
593.75
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
1
-
5111
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.
30
-
85.5
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.
30
-
199.5
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 25 sqmm 3.5 core
110
-
354.35
Add for light/fan points with modular types switch in place of piano type switch
29
-
41.8
Add for plug point with modular types switch and scocket in place of piano type switch and socket.
9
-
78.85
TOILET BLOCK
-
-
-
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loan clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m.(PWD-251)
7.42
-
104.5
Filling of carted earth
0.9
-
262.2
Local sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. (analysis attached)
0.36
-
826.5
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
2.47
-
5225
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or chordancewill be used. The rate of application of chemical emulsion shallbe as follows : (1)Treatment for masonary & foundation 5 liters per/100 sqm. (2) Back fill in immediate contact with foundation 7.5 liters/100sqm (3) Treatment of top surface of plinth filling 5 liters/100 sqm (4)Treatment junction of wall and the floor 7.5 liters /100 sqm (5)Treatment of soil along external perimeter of building 7.5liters/100sqm. (6) Treatment of soil under apron along external perimter 5 liters/100 sqm. (PAGE NO.-26)
5.05
-
266
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:2;4,(1cement :6 aggregate) along with synthetic triangular fibre cut of lenth 12mm specific gravity 1.34 dosage @ 900gms/cum.(Recorn3s of Relience industries ltd.)in lintel of doors & windows ixcluding supply of reinforcement & its bending the same with 24 B WG binding wire & necessarry centering & shuttering etc & also including supply of all materials labours & tool & plants etc required for proper completion of work strength the of the concrete shall no be less than M-15
0.46
-
7338.75
As in item 71 above but for slabs (Using 1:1.5:3 Mix concrete) (PWD 284)
0.95
-
8350.5
As in item 71 above but for lighter beam (Using 1:1.5:3 Mix concrete)
0.28
-
8787.5
First Class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (PWD- 303)
4.8
-
4227.5
Same as in item no.7 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. (PWD- 303+309 )
3.41
-
4683.5
Same as in item no.8 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below.
1.2
-
5058.75
Providing and laying damp proof coarse 25 mm thick with cement concrete 1:1.5:3 (1 cement:1.5coarse sand :3 graded stone aggregates 10 mm nominal size) and curing complete.
2.54
-
280.25
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
2.54
-
87.21
Providing and laying "Brick koba" 12mm thick laid with M-150 class brick bal coba 7.50 cm thick with the gape of 15mm to each other , over 20mm thick base of cement morter 1:4 cement and coarse sand mixed with the water proofing compounnd spreading cement slurry mixed with aerelic cement concrete water proofing compoundin 1:4 cement and coarse and mortar finished smooth and top mashed false square 35cmX30cm and side wall parpet shall be mono tythic plaster wall upto 30cm higher and juntion corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @2% by weight & including S/o all material, labour,T & P.etc complete for proper completion of work.
5.55
-
807.5
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 32 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SINGLE LEAF
3.15
-
1330
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (PWD 502)
-
-
-
Fabrication of hold fast for door chaukhats and windows.
9.6
-
61.75
Fabrication of grill / stair case railing.
13.5
-
66.5
Fabrication of Z-section steel windows.
16.2
-
53.2
Angle iron chaukhats (40*40*5)
25.74
-
61.75
Supply and fixing galavanized mosquitos proof heavy quality iron wire gauge of expended metal heavy quality over windows and including supply of teak wood batten 8cmX1cm (3" X 3/8")/flat iron 25mm X 4mm and including supply of necessary screws all material labour and tools and plants etc required for proper completion of work.
0.54
-
771.4
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (PWD- 504)
1.69
-
5130
Fixing of steel or wooden chaukhats in position.
-
-
-
(a) Door chaukhats
2
-
68.4
(b) Ventilator chaukhats
2
-
45.6
12 mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including brick wall level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive. 1 cement : 6 fine sand
51.08
-
112.1
15 mm cement plaster on rough side of single or half brick wall of mix : 13.2.2 1:6 (1 cement: 6 fine sand)
30.73
-
128.25
Making grooves 10 to 12 mm widex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required.
11.38
-
24.7
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
18.92
-
64.6
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement(25 mm thickfloor).
8.02
-
228
P/L(white coloured) Ceramic tiles Romano tiles flooring over 20mm thick base of cement mortar 1:3 ( 1cement : 3coarse sand)laid and jointed with white cement (with pigment) slurry including rubbing and polishing complete.
17.73
-
902.5
Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2.97
-
107.35
Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
2.97
-
90.73
Same as item 95 above but on new wood surface.
6.3
-
90.73
Finishing walls with acrylic smooth extarior paint of required shed. Two or more coat applied @1.67ltr/10sqm. Over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
51.08
-
87.4
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials.
30.73
-
66.5
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials.
6.77
-
66.5
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
0.54
-
703.41
Providing and fixing glass strips of 3.15mm (1/8") thickness in joints of floors and skirtings at the time of laying floors flush with the floor level including all material labour, tools & plants etc.
48.1
-
16.15
Providing and fixing stainless steel sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.
-
-
-
250x16 mm
2
-
332.5
Providing and fixing stainless steel tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.
-
-
-
300x10 mm
2
-
190
Providing and fixing stainless steel handles, ISImarked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screw setc.
-
-
-
100 mm
4
-
237.5
SUB-HEAD I (SANITARY FIXTURES & ACCESSORIES )
-
-
-
Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.
-
-
-
Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.
2
-
4298.03
Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.
-
-
-
a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.
2
-
1990.22
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings.
-
-
-
a) 32mm dia
2
-
68.5
b) 40mm dia
1
-
78.97
Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.
2
-
1017.17
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings and brackets, cutting and making good the wall wherever required : Size 450x300x150 mm
1
-
3268.25
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.
2
-
472.1
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms
3
-
125.69
SUB-HEAD II (SOIL WASTE & VENT PIPES AND FITTINGS )
-
-
-
Providing & fixing soil, waste and vent pipes.
-
-
-
a) 100mm dia centrifugally cast iron S & S pipe.
15
-
865.87
b) 75mm dia centrifugally cast iron S & S pipe.
25
-
786.47
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters.
-
-
-
a) 100mm
10
-
381.68
b) 75mm
18
-
323.37
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron / cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.
-
-
-
a) for 100mm dia pipe.
1
-
227.88
Providing & fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting & making good the walls & floors.
-
-
-
a) 100mm inlet & 100mm outlet.
1
-
1009.24
a) 100mm inlet & 75mm outlet.
1
-
953.03
Providing & fixing sand cast iron S and S bend of required degree with access door insertion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
a) 100mm dia.
1
-
365.98
b) 75mm dia.
1
-
294.44
Painting sand cast iron/centrifugally cast (spum) iron pipes and fittings with paint of any colour over a coat of primer of approved quality. (for new work)
-
-
-
a) 100mm
3
-
50.9
b) 75mm
2
-
38.73
Providing and fixing PTMT towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass brackets fixed to wooden cleats with C.P. brass screw.450mm. Long with total length of 495mm, width 78mm and effiective height of 88mm.
1
-
440.27
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.
-
-
-
a) 110mm diameter
20
-
241.84
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
a) 110mm
5
-
228.95
SUB-HEAD III (WATER SUPPLY PIPES AND FITTINGS)
-
-
-
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. (internal work)
-
-
-
Exposed on wall
-
-
-
a) 25mm dia nominal bore (medium duty)
30
-
259.35
c) 15mm dia nominal bore
15
-
225.86
d) 20mm dia nominal bore
15
-
272.79
Painting G.I. pipes and fittings with two synthetic enamel white paint over a ready mixed priming coat, both of paint of approved quality for new work.
-
-
-
a) 25mm dia nominal bore.
30
-
18.79
c) 15mm dia nominal bore.
15
-
12.05
d) 20mm dia nominal bore.
15
-
14.39
Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.
-
-
-
a) 15mm nominal bore
5
-
65.8
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931
-
-
-
a) 15mm nominal bore
2
-
332.13
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
a) 15mm nominal bore
1
-
437.89
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
-
-
-
a) 15mm nominal bore
2
-
421.76
Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats).
-
-
-
a) 25mm. Nominal bore
1
-
312.35
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
a) 25mm dia nominal bore
1
-
394.13
Providing and placing on terrace (at all floor levels) polyethen water storage tank. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Capacity 500 litre)
500
-
6.98
Providing and fixing brass stop cock of approved quality.
-
-
-
a) 20 mm nominal bore
1
-
239.85
SUB-HEAD IV (SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE SYSTEM)
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
-
-
-
a) Pipes 80mm to 300mm diameter.
15
-
288.73
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc.
-
-
-
a) 150mm diameter
15
-
396.55
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
a) 100mm diameter S.W. Pipe
15
-
792.1
Providing and fixing square mouth S.W. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design.
-
-
-
a) 150 x 100 mm. size P type
2
-
1837.18
Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
-
-
-
a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
1
-
8645.25
SEPTIC TANK (I)
-
-
-
Earth work in excavation
20.53
-
104.5
P.C.C. in Foundation (1:4:8)
2.01
-
5225
First Class Brick work in septic tank (1:4)
5.68
-
4417.5
R.C.C. work in septic tank Slab cover of septic tank
0.81
-
8350.5
M.S. work in R.C.C.
0.47
-
5130
20 mm th plastering inside septic tank (1 cement : 3 coarse sand)
28.5
-
156.75
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
6
-
731.93
Providing & fixing soil waste and vent pipe. (75 mm dia sand cost iron S&S pipe.)
1
-
786.47
Providing & fixing sand cost iron terminal guard 75 mm dia D.S.R.-2018/17.56.2.2
1
-
245.64
providing lead caulked joints to sand cost iron/centrifugally cast(squn) iron pipes and fitting of 75 mm dia. D.S.R.- 2018/17.58.2
1
-
323.37
Supply & fixing of medium quality R.C.C. Manohole cover with frame complete.HD.Circular shape, 560 int. dia.
2
-
1166.57
M.D.-2.5 Circular shape , 500 int. dia D.S.R.-(2018) 19.19.2.2
1
-
821
Soak Pit 2.50m Dia
-
-
-
Earthwork in excavation in foundation lift upto 1.5m & disposal of surplus excavated earth as directed by the Engineer-in-charge within a lead of 50m.
24.34
-
104.5
Providing & laying in cement concrete 1:4:8 (1 cement 4 coarse sand and 8 graded stone aggregate 40mm nominal size) & curing complete including cost of formwork on foundation and floors.
1.18
-
5225
Class 150 bk. In 1:4 cement and fine sand of 1.25 fineness modulous mortar in foundation & plinth including supply of materials, labour and tools & plants, etc. required for proper completion of the work.
3.57
-
4417.5
Reinforcement cement concrete work in slab with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agregrate 20mm nominal size)
0.74
-
8350.5
Reinforcement for R.C.C. work including cutting, straighting, bending & placing in position complete @ 1.00%
43.33
-
51.3
12mm cement plaster of mix 1:6 (1 cement : 6 fine sand)
23.55
-
112.1
Providing M.S. foot rest including fixing with 20 x 20 x 10 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded aggregate of nominal size 20 mm) as per standard design with 20x20mm sqm. DSR- 19.15/2018
2
-
334.71
Constructing soak pit 1.2mx1.20Mtr. Filled with brick bats including S.W. drain pipe 100mm diameter & 1.20m. Long complete as per standard design. D.S.R. 2018 -19.33
1
-
2067.56
CATTLE CRUSH BUILDING
-
-
-
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loan clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. (PWD-251)
12.34
-
104.5
Filling of carted earth
7.18
-
262.2
Local sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. (analysis attached)
2.87
-
826.5
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
4.54
-
5225
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or chordancewill be used. The rate of application of chemical emulsion shallbe as follows : (1)Treatment for masonary & foundation 5 liters per/100 sqm. (2) Back fill in immediate contact with foundation 7.5 liters/100sqm (3) Treatment of top surface of plinth filling 5 liters/100 sqm (4)Treatment junction of wall and the floor 7.5 liters /100 sqm (5)Treatment of soil along external perimeter of building 7.5liters/100sqm. (6) Treatment of soil under apron along external perimter 5 liters/100 sqm. (PAGE NO.-26)
13.99
-
266
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:2;4,(1cement :6 aggregate) along with synthetic triangular fibre cut of lenth 12mm specific gravity 1.34 dosage @ 900gms/cum.(Recorn3s of Relience industries ltd.)in lintel of doors & windows ixcluding supply of reinforcement & its bending the same with 24 B WG binding wire & necessarry centering & shuttering etc & also including supply of all materials labours & tool & plants etc required for proper completion of work strength the of the concrete shall no be less than M-15
0.52
-
7338.75
As in item 161 above but for slabs (Using 1:1.5:3 Mix concrete)(PWD 284)
1.76
-
8350.5
As in item 161 above but for lighter beam i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)(PWD 285)
1.2
-
8787.5
As in item 161 above but for footing (Using 1:1.5:3 Mix concrete).
1.84
-
7338.75
As in item 161 above but for column. (Using 1:1.5:3 Mix concrete).
1.62
-
9072.5
First Class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
7.54
-
4227.5
Same as in item no.166 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below.
0.5
-
5058.75
Providing and laying "Brick koba" 12mm thick laid with M-150 class brick bal coba 7.50 cm thick with the gape of 15mm to each other , over 20mm thick base of cement morter 1:4 cement and coarse sand mixed with the water proofing compounnd spreading cement slurry mixed with aerelic cement concrete water proofing compoundin 1:4 cement and coarse and mortar finished smooth and top mashed false square 35cmX30cm and side wall parpet shall be mono tythic plaster wall upto 30cm higher and juntion corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @2% by weight & including S/o all material, labour,T & P.etc.
17.56
-
807.5
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (PWD 502)
-
-
-
Fabrication of grill / stair case railing.
96.75
-
66.5
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
9.4
-
5130
12 mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including brick wall level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive. (1)1 cement : 6 fine sand
8.98
-
112.1
15 mm cement plaster on rough side of single or half brick wall of mix : (1) 1 cement : 6 fine sand
15.87
-
128.25
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
32.6
-
64.6
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement(25 mm thickfloor).
20.52
-
228
20 mm thick cement plaster in dado/ skirting in 1:3 consistingof onepart of cement and 2 partsof aprovedcoarse sand laid inpanels,finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.
0.41
-
199.5
Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
4.45
-
90.73
Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
42.4
-
107.35
Finishing walls with acrylic smooth extarior paint of required shed. Two or more coat applied @1.67ltr/10sqm. Over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
8.98
-
85.5
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. (PWD 649+650)
15.87
-
66.5
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. (PWD 649+650)
17.56
-
66.5
Supply of glass strips for flooring.40mm wide & 4 mm thick (PWD-631b)
123.14
-
19.95
INDOR WARD BUILDING
-
-
-
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loan clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m.(PWD-251)
17.53
-
104.5
Filling of carted earth
2.79
-
262.2
Local sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. (analysis attached)
3.22
-
826.5
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
5.27
-
5225
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or chordancewill be used. The rate of application of chemical emulsion shallbe as follows : (1)Treatment for masonary & foundation 5 liters per/100 sqm. (2) Back fill in immediate contact with foundation 7.5 liters/100sqm (3) Treatment of top surface of plinth filling 5 liters/100 sqm (4)Treatment junction of wall and the floor 7.5 liters /100 sqm (5)Treatment of soil along external perimeter of building 7.5liters/100sqm. (6) Treatment of soil under apron along external perimter 5 liters/100 sqm. (PAGE NO.-26)
19.62
-
266
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:2;4,(1cement :6 aggregate) along with synthetic triangular fibre cut of lenth 12mm specific gravity 1.34 dosage @ 900gms/cum.(Recorn3s of Relience industries ltd.)in lintel of doors & windows ixcluding supply of reinforcement & its bending the same with 24 B WG binding wire & necessarry centering & shuttering etc & also including supply of all materials labours & tool & plants etc required for proper completion of work strength the of the concrete shall no be less than M-15(PWD-283)
1.1
-
7338.75
As in item 188 above but for slabs (Using 1:1.5:3 Mix concrete)(PWD 284)
2.11
-
8350.5
First Class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (PWD- 303)
13.33
-
4227.5
Same as in item no. 190 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. (PWD- 309 )
11.14
-
4683.5
Same as in item no.190 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below.
0.61
-
5058.75
Providing and laying damp proof coarse 25 mm thick with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregates 10 mm nominal size) and curing complete.
4.73
-
280.25
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
4.73
-
87.21
Providing and laying "Brick koba" 12mm thick laid with M-150 class brick bal coba 7.50 cm thick with the gape of 15mm to each other , over 20mm thick base of cement morter 1:4 cement and coarse sand mixed with the water proofing compounnd spreading cement slurry mixed with aerelic cement concrete water proofing compoundin 1:4 cement and coarse and mortar finished smooth and top mashed false square 35cmX30cm and side wall parpet shall be mono tythic plaster wall upto 30cm higher and juntion corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @2% by weight & including S/o all material, labour T&P.etc.
19.62
-
807.5
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (PWD- 504)
2.95
-
5130
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (PWD 502)
-
-
-
Fabrication of hold fast for door chaukhats and windows.
7.2
-
61.75
Fabrication of grill / stair case railing.
113.4
-
66.5
Angle iron chaukhats (40*40*5)
30.6
-
61.75
12 mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including brick wall level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive.(PWD-586)
-
-
-
(1)1 cement : 6 fine sand
76.44
-
112.1
15 mm cement plaster on rough side of single or half brick wall of mix :
-
-
-
(1)1 cement : 6 fine sand
51.24
-
128.25
Making grooves 10 to 12 mm widex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required.
18.2
-
24.7
Making drip course in sun shade or FACIA as per direction of engineer- in- charge including supply of all materials labour etc. required for proper completion of the work.
36.4
-
64.6
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement(40 mm thickfloor).
21.46
-
228
20 mm thick cement plaster in dado/ skirting in 1:3 consistingof onepart of cement and 2 partsof aprovedcoarse sand laid inpanels,finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.
3.3
-
199.5
Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
1.13
-
90.73
Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
142.62
-
107.35
Finishing walls with acrylic smooth extarior paint of required shed. Two or more coat applied @1.67ltr/10sqm. Over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
76.44
-
85.5
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. (PWD 649+650)
51.24
-
66.5
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. (PWD 649+650)
14.95
-
66.5
Supply of glass strips for flooring.25mm wide & 4 mm thick
128.73
-
59.58
CATTLE TROUGH BUILDING
-
-
-
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loan clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m.(PWD-251)
17.53
-
104.5
Filling of carted earth
2.79
-
262.2
Local sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand. (analysis attached)
3.22
-
826.5
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
5.27
-
5225
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (Part-II 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or chordance will be used. The rate of application of chemical emulsion shallbe as follows : (1) Treatment for masonary & foundation 5 liters per/100 sqm. (2) Back fill in immediate contact with foundation 7.5 liters/100sqm (3) Treatment of top surface of plinth filling 5 liters/100 sqm (4) Treatment junction of wall and the floor 7.5 liters /100 sqm (5) Treatment of soil along external perimeter of building 7.5liters/100sqm. (6) Treatment of soil under apron along external perimter 5 liters/100 sqm. (PAGE NO.-26)
19.62
-
266
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:2;4,(1cement :6 aggregate) along with synthetic triangular fibre cut of lenth 12mm specific gravity 1.34 dosage @ 900gms/cum.(Recorn3s of Relience industries ltd.)in lintel of doors & windows ixcluding supply of reinforcement & its bending the same with 24 B WG binding wire & necessarry centering & shuttering etc & also including supply of all materials labours & tool & plants etc required for proper completion of work strength the of the concrete shall no be less than M-15(PWD-283)
1.1
-
7338.75
As in item 215 above but for slabs (Using 1:1.5:3 Mix concrete) (PWD 284)
2.11
-
8350.5
First Class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (PWD- 303)
13.33
-
4227.5
Same as in item no. 217 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. (PWD- 309 )
11.14
-
4683.5
Same as in item no.217 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below.
0.61
-
5058.75
Providing and laying damp proof coarse 25 mm thick with cement concrete 1:1.5:3 (1 cement:1.5coarse sand : 3 graded stone aggregates 10 mm nominal size) and curing complete.
4.73
-
280.25
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
4.73
-
87.21
Providing and laying "Brick koba" 12mm thick laid with M-150 class brick bal coba 7.50 cm thick with the gape of 15mm to each other , over 20mm thick base of cement morter 1:4 cement and coarse sand mixed with the water proofing compounnd spreading cement slurry mixed with aerelic cement concrete water proofing compoundin 1:4 cement and coarse and mortar finished smooth and top mashed false square 35cmX30cm and side wall parpet shall be mono tythic plaster wall upto 30cm higher and juntion corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @2% by weight & including S/o all material, labour T&P.etc.
19.62
-
807.5
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (PWD- 504)
2.95
-
5130
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. (PWD 502)
-
-
-
Fabrication of hold fast for door chaukhats and windows.
7.2
-
61.75
Fabrication of grill / stair case railing.
113.4
-
66.5
Angle iron chaukhats (40*40*5)
30.6
-
61.75
12 mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including brick wall level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive.(PWD-586)
-
-
-
(1)1 cement : 6 fine sand
76.44
-
112.1
15 mm cement plaster on rough side of single or half brick wall of mix :
-
-
-
(1)1 cement : 6 fine sand
51.24
-
128.25
Making grooves 10 to 12 mm widex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required.
18.2
-
24.7
Making drip course in sun shade or FACIA as per direction of engineer - in - charge including supply of all materials labour etc.required for proper completion ofthe work.
36.4
-
64.6
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement(40 mm thickfloor).
21.46
-
228
20 mm thick cement plaster in dado/ skirting in 1:3 consistingof onepart of cement and 2 partsof aprovedcoarse sand laid inpanels,finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.
3.3
-
199.5
Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
1.13
-
90.73
Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
141.62
-
107.35
Finishing walls with acrylic smooth extarior paint of required shed. Two or more coat applied @1.67ltr/10sqm. Over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
76.44
-
85.5
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. (PWD 649+650)
51.24
-
66.5
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approvedsynthetic material & sand papered smooth including cost ofall materials. (PWD 649+650)
14.95
-
66.5
Supply of glass strips for flooring.25mm wide & 4 mm thick
128.73
-
59.58
BOUNDARY WALL (50.00 M.)
-
-
-
Earth work in exacavation in trenches for foundations and for pipes cables etc.in ordinary soil ( loan clay orsand) including lift upto 1.5 m and leadup to 30m.&including filling watering& ramming of excavated earth in to trenches or in to the space between the building & the sides of foundation trenches or in to the plinth and removal & disposal of surplus excavated earth as directed by the Engineer i/c upto a distance of 30 m from the foundation trenches. (PWD-251)
23.4
-
104.5
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone agregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.(PWD
3.9
-
5225
R.c.c. work with cement approved coarse sand and 2 cm. (3/4") guage approved stone ballast in the proportion 1:6,(1 cement :6 aggregate) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 B WG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. (PWD-283)
-
-
-
As in item 239 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)(PWD- 285A)
2.07
-
8787.5
First Class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work. (PWD- 303)
13.8
-
4227.5
Same as in item no. 241 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. (PWD- 309 )
3.59
-
4683.5
Same as in item no.5 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below. (PWD-307+309+310A)
5.45
-
5058.75
Providing and laying damp proof coarse 25 mm thick with cement concrete 1:1.5:3 (1 cement:1.5coarse sand :3 graded stone aggregates 10 mm nominal size) and curing complete.
9.2
-
280.25
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
9.2
-
87.21
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (PWD- 504)
1.62
-
5130
12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering up to floor two level including brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and / or rounded angles not exceeding 80 mm in girth and finished even and smooth No. extra for mixing any additive. (1)1 cement : 6 fine sand
216.27
-
112.1
Finishing walls with acrylic smooth extarior paint of required shed. Two or more coat applied @1.67ltr/10sqm. Over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
216.27
-
85.5
M.S. GATE (3.6 MTR WIDE)
-
-
-
INTERLOCKING ROAD
-
-
-
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loan clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. (PWD-251)
19.41
-
104.5
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
22.49
-
5225
Class 150 brick work in 1:4 cement and corse sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.
8.37
-
4227.5
Supply & Laying of fine sand layer under interlocking tiles.
6.16
-
826.5
Supply of 80 mm thick mechanically compressed interlocking cement concrete pavers block manufactured by high pressure in grey cement. N.S. (i) ITEM SI.NO. 10 CHAP- 19
5392
-
17.1
Laying of interlocking tiles including leveling and dressing of surface to required lavel & slope, filling joints with local sand (labour only)
154.05
-
76
CONSTRUCTION OF TUBE WELL AND INSTALLATION OF SUBMERSIBLE PUMP
-
-
-
Drilling of 150 mm dia bore hole.
60
-
451.25
Supply of 110 mm dia PVC pipe (6KG/CM2 PRESSURE)
50
-
403.75
Supply of 110 mm dia slotted PVC pipe
3
-
332.5
Supply of PVC Socket 110 mm dia
12
-
180.5
Supply of End Cap110 mm dia
1
-
142.5
Supply of MS Clamp 110 mm with Nut & Bolt
1
-
418
Supply and fixing of nylon jali around the slotted pipes complete as required.
1
-
4750
Lowering of 110 mm dia Rigid PVC Pipe in bore hole iccluding cutting, jointing etc. complete
50
-
209
Providing and packing of coarse sand / pea gravel around the pipe.
0.6
-
4512.5
Supply of submersible pump of 1.5 H.P. of make KSB with control panel complete.
1
-
20900
supply of 4.0 sqmm 3 core PVC copper conductor submersible cable panel to submersible pump
50
-
247
supply of steel wire rope
50
-
47.5
G.S.T. will be paid extra as per applicable against G.S.T. notification.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements