Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date4 May 2023
Closing Date15 May 2023
Tender AmountRefer Documents
Costs
EMD
₹ 5,14,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_UPPRC_800476_1Bid Award Id
ViewTender No
03/GM-5/UPPCL/2023-24Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Sand filling in plinth excluding supply of necessary quantity of sand from a distance not excceding 8 km. (5 miles) from the site of work and including watering, ramming,dressing etc. rate to include cost of all materials, labour and T & P etc. required for proper completion of the work (Labour only).
143.08
135926
950
... More
Providing and laying Cement concrete 1:4:8 (1 cement : 4coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation
27.29
111479
4085
... More
Same as above but for under floor
81.17
331579
4085
... More
Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. 300 mm dia piles
444
901417
2030.22
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the Concrete of M25 grade with minimum cement content of 330 kg /cum All works upto plinth level
274.53
1889946
6884.3
... More
Providing & laying in position machine batched and machine. Mixed design mix M-25 grade cement concrete for reinforcement cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying including the cost of centering, shuttering , finishing and but excluding reinforcement , including admixtures in recommended proportion as per IS : 9103 to acclerate, retarder for setting of concrete/ improve workability without impairing strength and durability as per direction of Engineer-in-charge. Note :- Cement content considered in this item @ 330 kg/cum. Excess or less cement used as per design mix is payable or recoverable separately.R.C.C. work Above plinth Lvl. (M-25)
22.12
180731
8170.49
... More
T.M.T.-FE-500 steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks.
307
2149758
7002.47
... More
M-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, and T & P etc.required for proper completion of the work.
65.21
319039
4892.5
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete(4) Treatment of soil along external perimeter of building 7.5 liters/sqm. (5) Treatment of soil under apron along external perimter 5 liters/sqm.
897.04
132089
147.25
... More
Painting on DPC with two coats of air blown bitumen 85/50 or 85/25@ 1.7kg/Sqm.Approx including cost of fuel if any.
20.62
1833
88.93
... More
SUPER STRUCTURE
-
-
-
... More
M-150 brick work in 1:6 cement and coarse sand of 2.25 coarseness modulus mortar in super-structure. Above plinth level up to floor two level (up to two storey) including necessary cutting and molding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. Ground floor
68.78
366563
5329.5
... More
M-150 brick work in 1:4 cement and coarse sand of 2.25 coarseness modulus mortar in super-structure. Above plinth level up to floor two level (up to two storey) including necessary cutting and molding of half of brick work as required and also including honey combed brick work in thickness of wall more than 12cms.
10.71
62064
5795
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1)1 cement : 6 coarse sand.
493.87
49263
99.75
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)
479.41
128879
268.83
... More
Making grooves 10 to 12mm wide x 8mm deep in plaster of all or in ceiling vertically of horizontally as required.
209.79
4982
23.75
... More
Homogeneous Vinyl floor (armstrong) impurity wih daimond 10 coating thickness 2mm and 2 mtr wide. Thickness of wear layer would be 2mm and single layered operation complete as per direction of E/Incharge
951.63
2034109
2137.5
... More
Providing and laying rectified Glazed Ceramic wall tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 etc., complete
59.32
61989
1045
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
19.36
20231
1045
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primerapplied @ 2.20 kg/ 10 sqm)
493.87
37534
76
... More
Wall painting with plastic emulsion paint of approved brand and manufracture to give an even shade. Two or more coats on new.
479.41
34023
70.97
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
973.28
106330
109.25
... More
Painting Ist coat over priming coat (butexcluding cost of priming coat) on steeland other metal surfaces up to 10 cm.width or girth or small articles notexceeding 0.10sqm in area white superiorsynthetic enamel such as LUXOL3,Hi-glossapcolite superlac, DULUX . required for proper completion ofthe work.
15.12
1264
83.6
... More
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement window single panel with S.S. friction hinges
(300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)
1.62
13215
8157.51
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing
54.72
428707
7834.57
... More
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)
6.62
35587
5375.78
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)
1593.84
580508
364.22
... More
For shutters of doors, windows & ventilators including
providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
79.38
35019
441.16
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge.Pre-laminated particle board with decorative lamination
on both sides
61.13
45410
742.85
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not
less than 12.50 kg/sqm)
195.28
202189
1035.38
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required
13.23
46919
3546.46
... More
Providing and fixing stainless steel handles with screws etc. complete for 600mm long (Ozone make)
14
15960
1140
... More
Providing and fixing Ozone make lock for toughened glass including cost of material labour etc complete.
7
5985
855
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, 80x1.25 mm M.S. laths with 1.25 mm thick top cover
21.42
48837
2280
... More
Providing and fixing ball bearing for rolling shutters
4
1900
475
... More
Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area
15.12
13093
865.99
... More
Factory finished Peb structure compring of built up columns, but up tress frame, manufactured out of 345 Mps H tensile steel of approved make SW/ESSAR/ISPAT LTD. All structural members shall be designed as per 15. Only Flange to web Continuous welding will be done by submerged arc process and rest Joints will be done by MIG Welding Process and shall be in accordance with AWS D 1.1 and D 1.3 as applicable. All welders shall be qualified and certified for type of welds performed. All welders shall be qualified and certified for type of welds performed. Member shall be fabricated in full available length as per approved GA and no's of joints shall be kept mininium and given factory applied alkyd base DTM mono coat paint system- minimum 90-110 micron of approved make (Akzonobal, Aslan paint, Berger).All structural member shall be designed as par 15: Fer both up is 800 2007 Limit state design and wind Moed as per S $75 Part 3, 2015 and for selsmle 15 1893 (Part-1):2016. All Cold form of required) purn required) shall be manufactured out of 345 Mpa Galvanised steel in minimum thickness shall be 1.6- 2.0 mm and in depth of 200/230/250 mm as per approved GA drawings. All Cold form members (Side) girt/Roof partin) shall be made of hi-tensile steelAll hot rolled secondary members like bracing angles, connection plates etc. shall conform to IS: 2062 with minimum yield strength of 250 Mpa. All bracing members shall be hot rolled rod or angle bracing as per final approved design and drawings. The other component such as clips, connection plates, portal bracing anchor bolt etc shall be offered In MS steel grade 245mpa as per approved GA drawings. All site connection shall be bolted connections. All structural connection will be electroplated with 8-10 microns coating on high strength bolts conforming to Anchor Bolt (Black steel) shall conform to ASTM F1554 Grade 36 with minimum yield strength of 245 MPa. Nuts and lock nuts shall conform to IS: 1363 (part 1 to 31/ ASTM A563/ ASTM A563M and Only Plate washer will be used as per IS:2062 or ASTM A572. All anchor bolts shall have lock nuts. Anchor bolts shall be designed considering concrete strength. The portion of anchor bolts projecting above concrete (Inclusive of the part within grout) shall be mechanically cleaned and painted as per spec after erection. Anchor bolts shall not be less than 15- 20mm of diameter. Total number of anchor bolts shall not be less than four in any base plate. Rod or Pipe bracing is considered on Roof as per approved GA. For roof and wall cladding Self-drilling screws shall confirm
33466.94
5563878
166.25
... More
Supply and fixing of multi coloured galvaniume sheet with screws on cldding.
277.86
171578
617.5
... More
Supply & fixing of Hi Rrib profiled sheeting 1000-1030 cover width, 28/30mm crests @250-255mm c/e manufactured out of 0.55mm TCT hi-tensile Mult doured galvalume steel (AZ-150gsm Aluminium zinc allo y metallic coating of total both sides 550 Mps yield stress as pler The sheet shall have wide pans with 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin support. The male end of the sheet shall have anti capillary flute at side lap to prevent leakages. The shheet shall be passivated and clear resin coated. The sheet shall be fixed by means of galvanised self drillingg self taping fasteners (12.14x55 with EPDM seals) The sheet shall be suplied in lengths maximum upto 6.12 Mtrs long to suit side dimensions
961.11
753269
783.75
... More
Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge: With Type N - Normal 50 mm thick
961.12
207842
216.25
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete. Ridges plain (500 - 600mm) :
99.34
34963
351.96
... More
providing & fixing ge plastic 600mm dia turbo vents of approved make and laying in position as per drawing or as per directed by engineer in charge.
6
57000
9500
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete. Ridges plain (500 - 600mm) : Gutter (600 mm over all girth)
99.34
86175
867.48
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. a) 110mm diameter
51
12737
249.75
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and
secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet drawings and as directed by Engineer-in-charge 12.5 mm thick square edge PVC Laminated Gypsum
Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
952.21
1449558
1522.31
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (40 mm thick floor).
128.3
34127
266
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick
128.3
2437
19
... More
Construction of apron drain
142.56
103287
724.52
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete
929.92
223682
240.54
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
155.52
97696
628.19
... More
Lintels, beams, plinth beams, girders, buttresses and cantilevers.
154.61
73467
475.18
... More
Suspended floors, roofs, landings, balconies and access platform.
111.44
66724
598.75
... More
SANITARY FIXTURES & ACCESSORIES
-
-
-
... More
Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.
1
3230
3230
... More
Same as above but for European type W.C. pan with black plastic seat and lid. Make- Cera, Hindustan.
1
1653
1653
... More
Providing and fixing white vitreous china flat back or wall corner type Lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
3
12531
4177.01
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe,40 mm dia
3
244
81.51
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
3
342
114.28
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
3
1427
475.94
... More
WATER SUPPLY INSTALLATION
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
15 mm nominal outer dia Pipes
30
6086
202.87
... More
20 mm nominal outer dia Pipes
30
7732
257.74
... More
25 mm nominal outer dia Pipes
72
23319
323.88
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end),25 mm nominal bore
2
791
395.74
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
3
1659
553.32
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to ,15mm nominal bore
3
1172
390.82
... More
DRAINAGE WORK
-
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete 150 mm diameter
22
5643
256.5
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe
22
19100
868.21
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
5835
1945.12
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
74121
9265.24
... More
Septic Tank
-
-
-
... More
Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.
-
-
-
... More
from 0.00 mt to 1.5 mt
47.38
5401
114
... More
from 1.5mt to 3. mt
45.09
5782
128.25
... More
from 3mt to 4.5 mt
12.02
1712
142.5
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.
4.68
19117
4085
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. As in item no. 3 above but for slabs (Using 1:1.5:3 Mix concrete)
3.98
27405
6885.72
... More
M-150 brick work in 1:4 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
19.51
99159
5082.5
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
3.12
21847
7002.47
... More
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor to level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6Coarse sand.
82.6
8239
99.75
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).
19.87
4341
218.5
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:(With 20x20mm square bar)
18
6583
365.75
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
44441
22220.81
... More
Rain Water Harvesting,RECHARGE WELL
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-
-
-
... More
In all kind of soil upto 1.5m depth
57.06
6504
114
... More
In all kind of soil upto 1.5m to 3.0m. depth
57.06
7317
128.25
... More
In all kind of soil upto 3.0m to 4.5m. depth
66.36
9456
142.5
... More
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors.
3.03
12377
4085
... More
M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.
60.03
293696
4892.5
... More
R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Slab and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200.
2.76
19004
6885.72
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
3.24
22688
7002.47
... More
12 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 4 coarse sand) F.M. 2.25
125.67
12535
99.75
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar
18
6583
365.74
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved qualityCircular shape 500 mm internal diameter. M D - 10 19.2.2 150 mm diameter S.W. pipe
6
5209
868.21
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 300 mm dia
60
27746
462.44
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia
60
31957
532.63
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
8.97
9124
1017.21
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7.68
7852
1022.45
... More
Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7.59
7760
1022.45
... More
Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m.up to 1.50 m depth, Pipes 80 mm to 300 mm diameter
150
48898
325.99
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete
-
-
-
... More
150 mm diameter
135
63294
468.85
... More
200 mm diameter
270
177746
658.32
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarsesand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard
design :
-
-
-
... More
150 mm diameter S.W. pipe
135
73820
546.82
... More
200 mm diameter S.W. pipe
270
173550
642.78
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
10
80090
8009.01
... More
WIRING POINTS
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch,
-
-
-
... More
Light point
59
68962
1168.85
... More
Fan point
27
31558
1168.85
... More
Wiring point for plug with 1.5 sq.mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the medium class PVC conduit, modular switch and socket etc. complete in all respects,
80
24852
310.65
... More
Addition for light / fan points with moduler type switch in place of piono type switch.
82
3427
41.8
... More
Addition for plug points with moduler type switch in place of piono type switch
102
8042
78.85
... More
Addition for exhaust points with moduler type switch in place of piono type switch.
4
178
44.65
... More
Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion
36
21375
593.75
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
850
221459
260.54
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
600
204612
341.02
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
705
330856
469.3
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
315
292644
929.03
... More
Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming t
2320
136648
58.9
... More
Erection and testing of ceiling fan and regulator for room height upto 3.5 mts. i/c supply of 3 mm thick G.I. down rod 19 mm dia duly painted, complete in all respects.
23
3059
133
... More
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect.
17
3149
185.25
... More
Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered
23
3277
142.5
... More
Supply of ceiling fan with fan moter of A.C. permanent insulation ,capicitor rating conforming BEE 5 Star rating and and also comply with latest amendent. The rated Voltage 220/240 volts, 50 Hz, 1-ph AC the fan 1200 mm Sweep
23
39330
1710
... More
Supply and fixing of Electronic Fan Regulator(Modular) 120-280 V ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer Incharge of work.
23
11296
491.15
... More
Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.
8
37088
4636
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing
with heat sink, diffuser/ Reflector and driver set complete in all respect.
8
10260
1282.5
... More
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 40 to 50
Watt. Confirming to IP 65 protection complete in all respect.
14
60515
4322.5
... More
Supply and fixing of 17 watt LED Mirror light and complete in all respect.
3
3522
1174.2
... More
S/F of flush/surface mounting 6 ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by E/I
5
20757
4151.5
... More
S/F of flush/surface mounting 8 ways TPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by E/I.
3
14848
4949.5
... More
S/F of flush/surface mounting 6 ways VTPN distribution boards (Legrand Lexic) without MCB with additional metal door complete in all respects. As directed by E/I.
2
17955
8977.5
... More
S/F of 240 volts 'L' series 6-32 amp SP miniature circuit breaker (10 K A) in existing MCB, DB complete with connections as required (Legrand Lexic)
87
21489
247
... More
S&F of 6 Amp. to 32 Amp. 4 pole MCB (10 KA) C Curve
2
3040
1520
... More
S&F of 63 Amp. TP MCB (10 KA) C Curve
8
13604
1700.5
... More
S&F of 40 Amp. 4 pole MCB (10 KA)
5
10806
2161.25
... More
S&F of 63 Amp. 4 pole MCB(10 KA) C Curve
17
36983
2175.5
... More
S & F sheet steel enclosure for T.P./Four Pole MCB
9
7267
807.5
... More
S&F single pole MCB blanking plate
27
641
23.75
... More
S&F of 125 Amp 4 pole MCCB (25 KA) Thermal Magnetic release. (1021D)
26
262190
10084.25
... More
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required 63 A TP&N.
55
137776
2505.03
... More
Supply & laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the engineer in charge, complete in all respect. The armouring of the cable shall be properly connected with the earth con
-
-
-
... More
240 sq. mm 3-1/2 core
340
445417
1310.05
... More
70 sq. mm 3-1/2 core
364
211975
582.35
... More
10 sq. mm 4 core
360
111834
310.65
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge.
-
-
-
... More
240 sq. mm 3-1/2 core
6
2696
449.35
... More
70 sq. mm 3-1/2 core
22
4159
189.05
... More
10 sq. mm 4 core
22
1818
82.65
... More
Supply and fixing of plain or pin type copper tin plated
cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.
-
-
-
... More
240 sqmm
18
4651
258.4
... More
150mm
3
416
138.7
... More
35sqmm
22
647
29.45
... More
70sqmm
66
4200
63.65
... More
Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board
8
40888
5111
... More
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete
336
47880
142.5
... More
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
336
28728
85.5
... More
Supply & Errection of factory fabricated & wired metal clad and dustand vermin proof floor mounting entreis Electrical control panel with TPN MCCB s(four pole 36 KA with thermal magnatic release) Switches complete and lnstrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F. K.W etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.
The Job includes the grounting of the board as per directions of E/Ich. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only. Incoming 400 Amp 50KA MCCB. 1No.,Out going100 Amp.MCCB-3Nos. & 63 Amp.MCCB-2Nos.
1
189213
189213.4
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)
2
474
237.44
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
2
235
117.92
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. (1.18.2)
120
3633
30.28
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 5 pair
200
15390
76.95
... More
S/F of 10 pair junction Boxes for floors and building with Krone connectors, with connection and punching of same
1
2853
2853.8
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. (DSR 4.6)
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
250
133260
533.04
... More
150 mm width X 50 mm depth X 1.6 mm thickness
200
114096
570.48
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
40
36938
923.45
... More
150 mm width X 50 mm depth X 1.6 mm thickness
30
30356
1011.89
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50microns) with perforation not more than 17.5%, in convenientsections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
40
42292
1057.31
... More
150 mm width X 50 mm depth X 1.6 mm thickness
30
33057
1101.93
... More
MISCELLANEOUS
-
-
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
180
103834
576.86
... More
Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc complete as required
5
12160
2432
... More
a) 300 mm. sweep
14
106386
7599.05
... More
Making of folloing size of cable chamber made of 230mm thick brick work in cement mortar (1cement:6 sand) with PCC 100mm thick PCC base plastering of inner and outer surface with cement mortar including providing of heavy duty CI cover complete ith digging refilling and removal of surplus soil complete as required.
6
38543
6423.9
... More
FIRE EXTINGUISHER
-
-
-
... More
Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion
15
129675
8645
... More
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. (
15
283575
18905
... More
SAFETY EQUIPMENT
-
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
3
642
214.33
... More
Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
4
930
232.66
... More
Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge.
4
1862
465.5
... More
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.
13
31492
2422.5
... More
Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules
2
161
80.75
... More
Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.
2
579
289.75
... More
CCTV
-
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. 1 run of cable
4000
186200
46.55
... More
Supply, installation, testing,and comissioning of CAT6 information outlet (I/O) for Camera at user end. Approved Makes; Belden/siemon/Panduit/Derwiser/Rit
17
3633
213.75
... More
Supply,Installation, Testing & commissioning of CAT6 UPT,LSZH Patch cord as per ANSI/TIA/EIA/568C.2 and UL94-V-0,ROHS Compliant,patch cord 2 Mtr for rack side switch to end user connectvity. Approved Makes; Derwiser/ Panduit/learand/Svstmax
17
5134
302.01
... More
Supply, installation, testing and commissioning of IP IR Dome camera ,Resolution upto 2MP ,IR distance upto 20 mtrs.
12
36468
3039.05
... More
Supply,installation, testing and commissioning of IP IR Bullet camera , Resolution upto 2 MP , IR distance upto 20 mtrs.
5
19840
3968.15
... More
Supply,installation, testing and commissioning of 32 channel NVR , Approved Mkes : CP Plus / Hikvision
1
15200
15200
... More
Supply , Installation , testing and commissioning of 2TB surviellance Hard Disk.
1
6137
6137
... More
R.C.C Raod work With Brick Edging
-
-
-
... More
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loan clay or sand) including lift upto 1.5 m and dressing of sides
8.82
1005
114
... More
Providing and laying in cement concrete 1:4:8 (1 cement : 4 fine sand : 8 graded bricks aggregate 40 mm nominal size) and curing complete, including cost of form-work, in foundation and floors.
15.03
61397
4085
... More
Class 150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulus mortar in foundation and plinth including supply of all materials,labour
3.76
19110
5082.5
... More
P/L in cement concrete 1: 2: 4 (1 Cement : 2 coarse sand : 4 graded stone grit 20mm nominal size and curing complete including cost of form work for fixing of hold fasts including of supply of all materials lab
13.56
72139
5320
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade 'A' sealing compound.
45.24
269
5.95
... More
GST Extra as per applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements