Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date2 Jan 2025
Closing Soon15 Jan 2025
Tender Amount₹ 4,19,50,354
Costs
EMD
₹ 8,40,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPPRC_989414_1Tender No
07/GM-4/UPPCL/2024-25 Dated 01-01-2025Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1)Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment of soil along external perimeter of building 7.5 liters/sqm. (5) Treatment of soil under apron along external perimter 5 liters/sqm.
540.7
214
115963.93
... More
providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland Slag cement, admixtures in recommended proportions as per iS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of m25 grade with minimum cement content of 330 kg /cum R.C.C. work in Footing
189.22
6574
1244059.06
... More
upto plinth level Concrete of m25 grade with minimum cement content of 330 kg /cum R.C.C. work in Columns
18.58
6574
122157.37
... More
upto plinth level Concrete of m25 grade with minimum cement content of 330 kg /cum R.C.C. work in Grade Beam
24.58
6574
161605.39
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks.
235.71
7460
1758455.53
... More
First Class brick work in 1:6 cement and coarse sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. (1:6 cement & coarse sand)
23.08
4933
113866.33
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
54.16
284
15391.73
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
54.16
101
5475.58
... More
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand)
83.27
284
23716.96
... More
25mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement.
94.82
424
40285.23
... More
Making drain along with the apron.
105.36
602
63474.13
... More
ABOVE PLINTH LVL:- providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland Slag cement, admixtures in recommended proportions as per iS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level Concrete of m25 grade with minimum cement content of 330 kg /cum G.F.
13.59
6820
92693.04
... More
Concrete of m25 grade with minimum cement content of 330 kg /cum F.F.
13.93
6820
95012.07
... More
Concrete of m25 grade with minimum cement content of 330 kg /cum S.F.
15.11
6820
103060.47
... More
Concrete of m25 grade with minimum cement content of 330 kg /cum Th.F.
13.74
6820
93716.14
... More
As in item no. 14 above but for slabs. (Using 1:1.5:3 Mix concrete) G.F.
58.81
6820
401124.19
... More
F.F.
65.43
6820
446277.09
... More
S.F.
60.63
6820
413537.83
... More
Th.F.
56.99
6820
388710.55
... More
As in item 14 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete) G.F.
22.3
6820
152101.16
... More
F.F.
25.16
6820
171608.31
... More
S.F.
22.51
6820
153533.51
... More
Th.F.
22.77
6820
155306.88
... More
As in item 14 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20. G.F.
26.89
6820
183408.09
... More
F.F.
26.89
6820
183408.09
... More
S.F.
26.89
6820
183408.09
... More
Th.F.
31.09
6820
212054.94
... More
Brick work in super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall not to be less than 1.5 brick thick. (1:6 cement & coarse sand) G.F.
140.99
6298
888069.22
... More
F.F.
144.01
6298
907091.63
... More
S.F.
140.35
6298
884037.98
... More
Th.F.
166.67
6298
1049822.66
... More
Same as in item no. 18 but in 1:3 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. G.F.
86.27
795
68656.25
... More
F.F.
26.5
795
21089.5
... More
S.F.
80.78
795
64287.15
... More
Th.F.
32.84
795
26135.06
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (a) 35 mm thick
100.38
1502
150819.95
... More
Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Hold fast for chaukhats of doors/windows.
422.4
67
28402.18
... More
Door / windows & Staircase grill.
3754.02
151
568959.27
... More
Z-Section windows
4427.48
119
528596.84
... More
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size)
1407.84
135
190086.56
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters Second class teak wood
201.25
3356
675485.56
... More
Fixing of Door, windows/ventilators chaukhats in position. Doors Chaukhat
47
1233
57952.41
... More
Windows Chaukhat
89
778
69267.81
... More
Ventilators Chaukhat
33
588
19425.78
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces
10.08
4015
40471.3
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters
58.28
2201
128316.24
... More
Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be
mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the
frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineerin- charge.
183.15
528
96770.97
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks.G.F.
187.16
7460
1396260.39
... More
F.F.
192.05
7460
1432741.01
... More
S.F.
183.61
7460
1369776.5
... More
Th.F.
191.2
7460
1426399.8
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 coarse sand. G.F.
452.83
237
107642.22
... More
F.F.
399.86
237
95050.72
... More
S.F.
429.9
237
102191.53
... More
Th.F.
938.91
237
223188.3
... More
15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand. G.F.
1128.05
273
308487.83
... More
F.F.
1050.81
273
287365.01
... More
S.F.
1044.86
273
285737.86
... More
Th.F.
773.01
273
211395.04
... More
Making grooves 10 to 12 mm wide x 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required. G.F.
683.1
54
37044.51
... More
F.F.
688.02
54
37311.32
... More
S.F.
671.22
54
36400.26
... More
Th.F.
573.42
54
31096.57
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (size of tiles 600x600mm) G.F.
215.8
1074
231890.05
... More
F.F.
271.69
1074
291947.21
... More
S.F.
240.06
1074
257958.87
... More
Th.F.
116.28
1074
124949.84
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (size of tiles 600x600mm) G.F.
16.72
1122
18771.54
... More
F.F.
19.98
1122
22431.55
... More
S.F.
16.6
1122
18636.82
... More
Th.F.
7.7
1122
8644.79
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick G.F.
151.2
1347
203764.68
... More
F.F.
121.53
1347
163779.9
... More
S.F.
157.11
1347
211729.29
... More
Th.F.
154.35
1347
208009.78
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. G.F.
41.82
1628
68116.42
... More
F.F.
41.82
1628
68116.42
... More
S.F.
45.77
1628
74550.18
... More
Th.F.
48.27
1628
78622.18
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm
49.23
3552
174909.27
... More
40 mm thick 1:2:4 plain cement concrete floor (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement.
51.58
424
21914.28
... More
20 mm thick cement plaster in dado/ skirting in 1:3 consisting of one part of cement and 3 part of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.
7.72
457
3535.45
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. G.F.
40.04
769
30817.99
... More
F.F.
32.66
769
25137.75
... More
S.F.
49.11
769
37798.98
... More
Th.F.
42.36
769
32603.64
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. G.F.
157.55
769
121263.08
... More
F.F.
121.13
769
93231.34
... More
S.F.
195.26
769
150287.72
... More
Th.F.
147.85
769
113797.19
... More
Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
307.5
156
48123.75
... More
Same as above but wooden painting.
214.2
156
33522.3
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). G.F.
452.83
118
53592.43
... More
F.F.
399.86
118
47323.43
... More
S.F.
429.9
118
50878.67
... More
Th.F.
938.91
118
111120
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Inner walls) G.F.
1128.05
128
144864.18
... More
F.F.
1050.81
128
134945.02
... More
S.F.
1044.86
128
134180.92
... More
Th.F.
773.01
128
99269.94
... More
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on ceiling to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost of all materials. (Ceiling) G.F.
485.52
128
62350.48
... More
F.F.
542.03
128
69607.49
... More
S.F.
521.43
128
66962.04
... More
Th.F.
404.1
128
51894.52
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. G.F.
2066.4
107
223047.22
... More
F.F.
1992.7
107
215092.04
... More
S.F.
1996.19
107
215468.75
... More
Th.F.
2116.02
107
228403.2
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
201.25
736
148208.55
... More
Providing & fixing Stainless steel sliding door bolts ISI marked to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
47
332
15627.5
... More
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 250 mm x 10mm
47
237
11162.5
... More
(a) 200 mm x 10mm
47
190
8930
... More
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm
94
142
13395
... More
Providing & laying "brick Coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be mono lythic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonry coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour T & P etc complete for proper completion of work.
554.03
1165
645600.08
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
84
187
15772.68
... More
Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.
15.51
3701
57404.22
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
7.19
886
6372.78
... More
Providing and fixing ball bearing for rolling shutters.
2
340
681.14
... More
Providing & fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing & making curvature (wherever required) & fitting the same with necessary stainless steel nuts, bolts complete, i/c fixing the railing with necessary accessories & stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Eng-in-charge.
716.04
534
382573.01
... More
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
57.57
1900
109383
... More
Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
193.7
426
82676.97
... More
centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete
201.31
271
54607.35
... More
columns, pillars, piers, Abutments, posts and Struts
1314.35
664
873977.03
... More
lintels, beams, plinth beams, girders, bressumers and cantilevers
1808.31
509
921135.03
... More
Suspended floors, roofs, landings, balconies and access platform
1901.43
641
1219577.2
... More
SUB HEAD - I - SANITARY INSTALLATIONS:- Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:- White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests.
12
4681
56174.16
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:- W.C. pan with ISI marked white solid plastic seat and lid
19
5538
105228.84
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
16
5519
88310.56
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. White Agaria Marble Stone
12
2421
29056.2
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.
26
2739
71229.86
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
2
4804
9608.88
... More
Providing and fixing CP Brass 32/40mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge
42
715
30063.6
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia
4
4801
19204.36
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 40 mm dia
6
80
484.32
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
9
1112
10010.34
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
13
116
1513.85
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
6
160
962.7
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
4
490
1961.6
... More
Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length : 15 mm nominal bore
77
58
4527.6
... More
45 cm length 15 mm nominal bore
18
67
1217.16
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter
4
153
615.2
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
31
350
10867.67
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
10
567
5677
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
6
490
2940.12
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
32
463
14840.64
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore
71
397
28205.46
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
10
51
517.4
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
13
77
1002.17
... More
Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects. (Make -Jaquar ALD-565)
9
1154
10388.25
... More
SUB HEAD - II - ROOFING DRAINAGE WORK :- Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
10
206
2063.1
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. Single socketed pipes. 110 mm diameter
141
261
36809.46
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Coupler 110 mm
4
94
376.72
... More
Single pushfit Coupler 110 mm
12
88
1059.12
... More
Single tee with door 110x110x110 mm
8
153
1224.88
... More
Single tee without door 110x110x110 mm
4
153
612.44
... More
Bend 87.5 degree 110 mm Bend
10
104
1040
... More
Shoe (Plain) 110 mm Shoe
10
91
912
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
10
37
378.4
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm
14
255
3581.62
... More
110 mm
135
256
34673.4
... More
SUB HEAD - III - SOIL & WASTE DRAIANGE WORK:- Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks
6
288
1729.86
... More
Cutting holes up to 15x15 cm in R.C.C. floors androofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof
12
312
3751.92
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole
2
35
71.74
... More
Rectangular type with openable circular lid 150 mm nominal size square 100 mm diameter of the inner hinged round grating
2
136
272.48
... More
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes. 110 mm dia.
355
679
241133.75
... More
Providing and fixing floor trap/floor drain of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110mm x 110mmX110mm
50
1159
57950
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Coupler Coupler for 110mm pipe
28
209
5852
... More
Single tee with door 110x110x110 mm
20
403
8075
... More
Single 'Y' 110x110x110 mm
52
394
20501
... More
Bend 87.5° without door 110 mm bend
12
247
2964
... More
Shoe (Plain) OR Bend 45° 110 mm bend
10
209
2090
... More
Vent Cowl 110mm
12
85
1026
... More
Clean Out Plug (COP) 110mm
14
190
2660
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. For Wash basin & Urinal 50mm dia. Pipe
25
327
8193.75
... More
40mm dia. Pipe
40
242
9690
... More
Elbow (90°) 50mm
14
80
1130.5
... More
40mm
18
52
940.5
... More
Elbow (45°) 50mm
9
66
598.5
... More
40mm
13
42
555.75
... More
TEE 50mm
9
95
855
... More
40mm
14
66
931
... More
Coupler 50mm
8
57
456
... More
40mm
12
38
456
... More
SUB HEAD - IV - INTERNAL WATER SUPPLY:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc 15 mm dia nominal bore
190
344
65424.6
... More
20 mm dia nominal bore
145
371
53921.15
... More
25 mm dia nominal bore
80
433
34710.4
... More
32 mm dia nominal bore
24
511
12273.36
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall / Terrace 20 mm dia nominal bore
34
302
10284.66
... More
25 mm dia nominal bore
58
381
22133.96
... More
32 mm dia nominal bore
25
461
11534.5
... More
40mm dia nominal bore
53
561
29765.33
... More
50 mm dia nominal bore
65
725
47136.05
... More
65 mm dia nominal bore
5
726
3633.75
... More
80 mm dia nominal bore
40
926
37050
... More
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore
8
401
3212.08
... More
20 mm dia nominal bore
12
439
5272.56
... More
Providing and fixing gun metal gate valve with wheel of approved quality20mm dia nominal bore
7
430
3013.71
... More
25mm dia nominal bore
6
373
2240.94
... More
32mm dia nominal bore
6
477
2862.06
... More
40mm dia nominal bore
5
571
2857.15
... More
50mm dia nominal bore
3
710
2130.48
... More
65mm dia nominal bore
1
1205
1205.09
... More
80mm dia nominal bore
1
1801
1801.63
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 20 mm dia nominal bore
34
16
546.72
... More
25 mm dia nominal bore
58
20
1213.36
... More
32 mm dia nominal bore
25
25
628.5
... More
40mm dia nominal bore
53
29
1563.5
... More
50 mm dia nominal bore
65
35
2293.2
... More
65 mm dia nominal bore
5
58
290.7
... More
80 mm dia nominal bore
40
67
2713.2
... More
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc. complete. (Zoloto Make) 50mm dia.
1
35020
35020.8
... More
Providing , checking, storing, fixing in position of approved quality Screwed ends Brass float valve with brass ball float and PTFE seat suitable for Body test pressure of 15Kg/sqcm of the following sizes: (Lehry Make) 50mm dia.
1
7367
7367.25
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 25mm dia.
5
1225
6127.5
... More
40mm dia.
3
1368
4104
... More
50mm dia.
4
1515
6061
... More
65mm dia.
1
1657
1657.75
... More
80mm dia.
1
1914
1914.25
... More
100mm dia.
1
2398
2398.75
... More
SUBHEAD I- WIRING POINTS :- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C
424
1043
442533.04
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
10
1128
11282.2
... More
Wiring for light/ Power plug with 2X4 sq. mm FRLS PVC insuleted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
890
241
214712.5
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire
235
198
46678.05
... More
2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire
278
317
88151.02
... More
2 x 10 sq.mm. + 1 x 6 sq.mm. earth wire
10
411
4117.1
... More
4 x 6 sq.mm. + 2 x 6 sq.mm. earth wire
10
544
5446.1
... More
4 x 10 sq.mm. + 2 x 6 sq.mm. earth wire
200
725
145182
... More
4 x 16 sq.mm. + 2 x 6 sq.mm. earth wire
110
985
108452.3
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
93
266
24787.29
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
15
28
433.35
... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 amps switch
165
74
12276
... More
2 Way 5/6 amps switch
10
106
1069
... More
15/16 amp switch
100
112
11268
... More
3 pin 5/6 amp socket outlet
165
88
14539.8
... More
6 pin 15/16 amp socket outlet
100
142
14229
... More
Telephone socket outlet
34
106
3634.6
... More
TV antenna socket outlet
4
106
427.6
... More
Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required.
4
71
286.04
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
19
525
9977.09
... More
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2 Pair
408
27
11199.6
... More
20 Pair
60
251
15105
... More
Installation, testing and commissioning of ceiling fan,including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
93
244
22771.98
... More
Installation of exhaust fan in the existing opening , including making good the damage, connection, testing commissioning etc. as required. (a): Up to 450mm sweep
36
325
11701.08
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
36
149
5382.36
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
80
104
8378.4
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
100
33
3395
... More
SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS:- Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan
93
1971
183382.98
... More
Supply, Installation, Testing and Commissioning of Surface mounted 15W LED Downlighter made of polycarobate housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 1500, Life of LED : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K (SDCM5), CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.Minimum Internal Surge Protection 2.0KV & Luminaire manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips or equivalent.
8
646
5168
... More
Supply, Installation, Testing and Commissioning of Mirror mounted 10W LED batten made of extruded Aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 1000, Life of LED : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K (SDCM5), CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.Minimum Internal Surge Protection 2.0KV &Luminaire manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips BN021C LED10S PSU CW GR S2
119
427
50872.5
... More
Supply, Installation, Testing and Commissioning of surface LED batten 20W made of extrusion aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =95lumens/watt with Minimum system Lumens 2000, Life of fixture (Including Driver) : 30000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM=5) , CRI 80, PF 0.95, Min working temp range - 0°C Ta 45°C, an operating Voltage Range of 140 - 277 VAC.luminair manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips BN021C LED20S PSU CW GR S2
162
237
38475
... More
Supply, Installation, Testing and Commissioning of 6.5W LED bulkhead made of die cast aluminum housing, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) =100lumens/watt with Minimum system Lumens 700, Life of fixture (Including Driver) : 30000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 4000K (SDCM5), CRI 80, PF 0.95, Min working temp range -0°C Ta 45°C, an operating Voltage Range of 140 - 270 VAC.Minimum Internal Surge Protection 2.5KV & , The fixture design should comply with EMC / EMI compliance along with BIS certification for LED Driver & Luminaire ,. luminair manufacture shall provide LM79report from NABL accredited lab & LM80 report issued by LED manufacturer.Similar to Philips or equivalent.
6
237
1425
... More
SUBHEAD III-DISTIBUTION BOARD:- Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way Double door (4 + 12)
5
2954
14774.5
... More
6 way Double door (4 + 18)
3
3592
10778.07
... More
8 way Double door (4 + 24)
6
4309
25859.58
... More
Supplying and fixing of following ways surface/ recess mounting,vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way Double door (4 + 12)
1
5425
5425.87
... More
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. For 4 way, Double door TPN MCBDB
5
780
3900.4
... More
For 6 way, Double door TPN MCBDB
3
811
2435.58
... More
For 8 way, Double door TPN MCBDB
6
967
5807.22
... More
Supplying and fixing Cable End Box (Loose wire box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
1
845
845.08
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
162
184
29955.42
... More
Supplying and fixing 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A 4P Schneider (ACT 9 'C' CURVE 10kA)
5
3382
16910
... More
40A 4P Schneider (ACT 9 'C' CURVE 10kA)
12
3382
40584
... More
63A 2P Schneider (C-Curve ACTI9 10kA)
1
2042
2042.5
... More
Supplying and fixing 415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCCB 25/36KA complete with connections, testing and commissioning etc. as required. 63A 4P Schneider (EasyPact,25kA)
1
5282
5282
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
96
9
901.44
... More
SUBHEAD IV-EARTHING :- Suplly and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I. all respects.
6
4351
26106
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
5
839
4196.55
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
205
176
36129.2
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
220
50
11123.2
... More
CABLES:- Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required. Make: Polycab/KEI/RR/Fenolax/Equ 3.5C x 300 sqmm aluminium conductor, A2XWY.
100
3401
340100
... More
3.5C x 70 sqmm aluminium conductor, A2XWY.
40
1064
42560
... More
3.5C x 50 sqmm aluminium conductor, A2XWY.
50
902
45125
... More
3.5C x 35 sqmm aluminium conductor, A2XWY.
5
627
3135
... More
3.5C x 25 sqmm aluminium conductor, A2XWY.
10
237
2375
... More
4C x 16 sqmm aluminium conductor, 2XWY.
85
199
16957.5
... More
4C x 10 sqmm aluminium conductor, 2XWY.
20
90
1805
... More
2C x 16 sqmm aluminium conductor, 2XWY.
10
78
788.5
... More
Supplying following 1.1kV grade, XLPE insulated, FRLS type control cables,suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation and with all components as mentioned in BOQ, specifications and schedule, complete as required.2C X 2.5 sqmm copper conductor
10
76
760
... More
4C X 2.5 sqmm copper conductor
10
114
1140
... More
6C X 2.5 sqmm copper conductor
10
148
1482
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
125
32
4062.5
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 1mm thick saddle)
95
66
6312.75
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with 1mm thick saddle)
100
133
13362
... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 300 sq. mm (70 mm)
8
863
6905.12
... More
3½ X 70 sq. mm (38mm)
2
338
676.06
... More
3½ X 50 sq. mm (32mm)
2
298
596.62
... More
3½ X 35 sq. mm (32mm)
2
266
533.06
... More
3½ X 25 sq. mm (28mm)
2
226
452.16
... More
4 X 16 sq. mm (28mm)
6
223
1339.14
... More
4 X 10 sq. mm (25mm)
4
194
777.2
... More
2 X 16 sq. mm (22mm)
2
184
369.82
... More
2C X 2.5 sqmm copper conductor (19mm)
2
88
176.7
... More
4C X 2.5 sqmm copper conductor (19mm)
2
88
176.7
... More
6C X 2.5 sqmm copper conductor (19mm)
2
88
176.7
... More
MISCELLANEOUS Supply, Installation, Testing and Commissioning of 250mm size PVC exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x1.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. Make:Crompton Brisk Air Neo 250 mm (10 inch)-BRISKAIRNEO10WHT
35
2327
81462.5
... More
S/f of 50 pair Telephone Tag Block for Floors and building with Krone connectors , with connection and punching of same Make-Kone
1
11875
11875
... More
LT PANEL Design, Supply, installation, testing and commissioning of indoor/outdoor floor mounted/ wall mounted, IP43/IP65, IEC 61439/IS 8623, factory built, modular, sectionalised, compartmentalized, extendable type HT/LT cubicle panel of suitable size suitable for operation on 33/11/0.433/0.415 kV, 50 Hz AC 3 phase supply system fabricated from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates with stiffeners wherever required, having vibration free structure chemically treated with seven tank process or better before painting for surface treatment and powder coated in approved shade, with suitable electrolytic grade high conductivity bus bars extensible, DMC/ SMC (whichever is superior) bus bar supports, with short circuit withstand capacity as mentioned ,bottom base channel of section not less than 100mmX 50mmX 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of required size at the rear with 2 Nos. earth stud, connections and interconnection with solid conductor wires / copper strips, neutral links, control wiring with 1.5 sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, including providing and fixing following switch gears as per SLD ,technical specifications etc.complete in all respect so as to fulfill all as required. Make Schnider/ABB/Equ
1
366339
366339
... More
EM Panel:- The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm, Phase to neutral-minimum 15mm. Incoming : 1Nos 200 Amp. 4P MCCB of (25 KA) Breaking capacity, 1Nos 200 Amp. 4P ATS., Metering : 1 Set of CT's one of 200/ 5Amp ratio for Multifunction Meter, 1 Set of CT's one of 200/ 5Amp ratio 50/51, 1 Nos. Set of Phase Indication Lamp. 1 Nos. of class-III Type SPD Bus Bar : 300 Amp.TPN aluminimum bus bar of suitable length.25KA Outgoing : Phase indication lamps on each outgoing to be provided. 04 No.63 Amp 4P MCCB. (25 KA),05 No.40 Amp 4P MCB. (10 KA),Panel described as above
1
375848
375848.5
... More
SITC APFC Panel of 60KVAR capacity suitable for operation on 415 + 5% Volt, 3 Phase, 50Hz, AC supply, having MPP type, resin bounded, static 10KVAR capacitors (without oil) in tier formation complete with following TPN MCCB as incomer of the panel, 6 step microprocessor based power factor controller relay capable to select the rating from 1 KVAR to multiples thereon up to max rating of the panel, current limiting contactors for each capacitors protected with MCBs, Ammeter (Analogue type) with CTs, Voltmeter (Analogue type) selector switches indicating lights, cooling fans for panel, earthing the panel with 2 Nos. 25mm x 5mm thick GI steel flat from existing earth bar, connection of APFC panel with suitable size 3.5 core aluminium conductor armoured XLPE cable from main LT panel (maximum length of cable 10 mtrs.) and compression glands etc. as reqd. The panel should have provision of timer based circuit in APFC relay to switch ON and OFF the static part automatically as and when requried. Capacity of Static capacitors should be accommodated from the overall rating of the panel and should be designed to switch in independently. The panel should be manufactured with 1.6mm thick CRCA sheet duly powder coated. Panel described as above
1
146955
146955.5
... More
Fire Panel
1
61940
61940
... More
Plumbing Panel
1
40403
40403.5
... More
SUBHEAD VIII-CABLE TRAY & RACEWAY:- Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.
20
483
9664.2
... More
300 mm width X 50 mm depth X 1.6 mm thickness
10
695
6955.7
... More
750 mm width X 62.5 mm depth X 2 mm thickness
10
1630
16302.2
... More
EXTERNAL SEWERAGE WORK :- Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia
95
243
23141.05
... More
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): Depth not exceeding 1.5 m
285
49
14204.4
... More
Providing, laying and jointing glazed stoneware pipes class SP-1with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter
5
306
1534.25
... More
150 mm diameter
40
481
19252
... More
200 mm diameter
50
671
33560.5
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :100 mm diameter S.W. pipe
5
317
1585.8
... More
150 mm diameter S.W. pipe
40
514
20560.8
... More
200 mm diameter S.W. pipe
50
604
30211
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
1891
3782.62
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150x100 mm size P type Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) : with common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
8833
70669.6
... More
Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
6104
6104.74
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
20
383
7660.2
... More
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
4765
4765.84
... More
EXTERNAL WATER SUPPLY WORK:- Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.
80
149
11931.2
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work15 mm dia nominal bore
10
222
2228.4
... More
20 mm dia nominal bore
35
254
8923.95
... More
50 mm dia nominal bore
30
527
15816
... More
65 mm dia nominal bore
5
620
3101
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
2
630
1261.56
... More
50 to 80 mm nominal bore
1
1234
1234.97
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe
10
8
83.4
... More
20 mm diameter pipe
35
10
350
... More
50 mm diameter pipe
30
21
633
... More
65 mm diameter pipe
5
26
130.9
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :15 mm diameter pipe
10
106
1068.4
... More
20 mm diameter pipe
35
108
3790.15
... More
50 mm diameter pipe
30
119
3595.2
... More
65 mm diameter pipe
5
189
945.75
... More
Providing and fixing gun metal gate valve with wheel of approved quality.20mm dia nominal bore
2
430
861.06
... More
25mm dia nominal bore
1
373
373.5
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 50 mm dia
1
2617
2617.48
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of
class designation 7.5
1
13071
13071.31
... More
SEPTIC TANK & SOAK PIT Size :- Length = 5.00 M. Width = 2.00M Total Depth =3.00M Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-incharge. In all kind of soil upto 1.5m depth
28.22
122
3464.85
... More
In all kind of soil upto 1.5m to 3.0m. depth
25.93
210
5458.01
... More
In all kind of soil upto 3.0m to 4.5m. depth
6.91
298
2060.63
... More
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 40mm nominal size)
2.77
5449
15095.81
... More
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
14.27
5098
72755.02
... More
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
2.28
6257
14266.35
... More
Suspended floors, roofs, landings, balconies and access platform.
15.19
641
9742.89
... More
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
1.79
7408
13260.98
... More
12mm cement plaster on rough side of mix 1:3 (1 cement : 3 coarse sand)
60.96
303
18522.09
... More
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
12
376
4521.36
... More
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
2
429
859.12
... More
Providing & fixing 75mm dia vent pipes.
1
722
722.68
... More
Providing & fixing of 75mm dia cast iron terminal guard.
1
235
235.67
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter
2
811
1622.24
... More
M.D. -2.5- Circular shape 450mm internal diameter
4
809
3236.32
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks
1
18581
18581.03
... More
(PUMPING EQUIPMENTS):- Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for nclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head.
1
73572
73572.11
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required 1.2 Meter high and 250 mm dia.
1
13177
13177.53
... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
1
863
863.86
... More
Air Release Valve, Gunmetal, having rubber ball with 1” (25mm) BSP Male threaded inlet
1
1443
1443.05
... More
(PIPING, VALVES AND ACCESSORIES):- SLTC of M.S. pipe on surface Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia
102
1845
188236.92
... More
80 mm dia
4
1361
5446.08
... More
25 mm dia
4
537
2149.56
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required 100 mm dia
15
2828
42422.25
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 100 mm dia
8
4815
38524.24
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required 100 mm dia
2
7981
15962.68
... More
Supply, Installation, Testing and Commissioning of 100 mm dia Bourden type, Stainless Steel dial type Pressure Gauge including brass isolation valve and siphon pipe having calibration of 0 - 16 Kg / cm2 .
5
486
2432
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange 100 mm dia
1
4813
4813.36
... More
Providing & fixing double flanged Metallic expansion with M.S. fixed flanges (PN-1.6) joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete as required as per specifications. 100 mm dia
2
5086
10172.6
... More
(HYDRANTS SYSTEM):- Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required Single headed Gunmetal
4
5522
22090.64
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal
8
3757
30058.96
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as
required : Gun metal
4
1745
6980.24
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal
valve & M.S. Pipe and socket 40M
4
8720
34881
... More
SITC weather proof M.S Door and glass fire door size 2100 mm x 900 mm or as per arch. Supplying, installation, testing and commissioning of weather proof M.S door and glass fire door size 2100 mm x 900mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following: -
6
8552
51317.1
... More
Fireman Axe-made of carbon steel with rubber insulated handle tested to 20,000 Volts as per IS:926
6
1146
6879.9
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe
1
4869
4869.7
... More
(FIRE EXTINGUISHERS):- Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed. 4.5kg capacity cylinder.
10
4446
44469.5
... More
ABC type extinguisher with cylinder fully charged with 6 Kg. capacity.
10
1745
17451.5
... More
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.
10
646
6469.5
... More
SUB-HEAD-I FIRE ALARM SYSTEM Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 4 Zone
1
6403
6403.86
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
63
832
52466.4
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
10
342
3423.7
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation
with amplifier i/c line matching transformer etc. complete as required.
10
402
4023.2
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable Ethylene Propylene Runner (EPR) inshulation and LSZH inner bedding, steel wire armouring & FRLS outer sheath complete as required.
1560
259
404508
... More
RAIN WATER HARVESTING PITE:- arth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. In all kind of soil upto 1.5m depth
22.59
122
2773.6
... More
In all kind of soil upto 1.5m to 3.0m. depth
22.59
210
4754.97
... More
In all kind of soil upto 3.0m to 4.5m. depth
22.59
298
6736.56
... More
In all kind of soil upto 4.5 m to 6.0m. depth
10.54
385
4067.49
... More
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
1.2
5449
6539.7
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
24.14
5098
123076.82
... More
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
1.61
6257
10074.04
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
10.75
641
6895.05
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1.27
7460
9474.52
... More
12mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand)
46.16
310
14353.91
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
10
376
3767.8
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter
1
811
811.12
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually.
15
571
8567.4
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depth`s, as per direction of Engineer-in-charge. 150 mm nominal size dia
15
558
8377.95
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
12.13
1044
12668.21
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
13.11
1064
13949.56
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in r`echarge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
13.11
1064
13949.56
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providin`g gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete a`s per direction of Engineer-in-charge.
1
1400
1400.4
... More
DESILTING CHAMBER Earth work in exacavation in trenches for foundations and for pipes cables etc. in ord`inary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. In all kind of soil upt`o 1.5m depth
10.05
122
1233.94
... More
In all kind of soil upto 1.5m to 3.0m. depth
4.06
210
854.59
... More
Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand:4 grad`ed Stone aggregate 20 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.
1.04
5449
5667.74
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
3.52
5098
17946.58
... More
Reinforcement cement concrete work in RCC culvert slab with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) excluding centering and shuttering and reinforcement.
1.38
6257
8634.89
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
9.93
641
6369.1
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Me`chanically Treated bars of grade Fe-500D or more.
1.09
7460
8131.67
... More
12mm cement plaster o`n rough side of single or half brick wall mix 1:3 (1 cement : 3 Coarse sand)
17.6
310
5472.9
... More
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cemen`t concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
12
376
4521.36
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter
2
811
1622.24
... More
RAIN WATER HARVESTING PIPE & CHAMBER:- Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each` deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.
80
243
19487.2
... More
Providing and laying cement concrete 1:5:10 (1cement: 5 coarse sand :10 graded stone aggregate 40 mm nominal size) upto the haunches of pipes including bed concrete as per standard design.150 mm. dia. RCC Pipes
80
514
41121.6
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
80
384
30792.8
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With common burnt clay FPS (non modular) bricks of class designation 7.5
6
8833
53002.2
... More
Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
8
383
3064.08
... More
COST OF BOUNDARY WALL
202.42
10207
2066240.61
... More
COST OF M.S. GATE
2
131132
262265.82
... More
COST OF CATTLE TRAP
2
56791
113582.04
... More
COST OF STORM WATER DRAIN WITH PERFORATED RCC COVER
252.42
1916
483773.03
... More
COST FOR LAYING OF INTERLOCKING TILES
430
1037
446305.6
... More
Supply and laying of 3 core standered aluminium conduktor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098(Part-II with latest amendments) 11 KV grade at a depht of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks in sides and on the top put across. The armouring of cable shall be properly connected with earth condutor by clamps etc. 300 sq. mm 3 Core
40
4366
174648
... More
Supply and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 300 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
2
2606
5213.52
... More
Supply and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 300 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
2
4545
9090.78
... More
EARTHING AND LOOP EARTHING:- Supply and burring of Safe Earthing Electrode T-39 AAlloy Coated, Length 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing.d.
8
4351
34808
... More
Supply and laying of 50mm x 6mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
50
285
14250
... More
Supply and Laying of 50mm X 6 mm Copper strip from earth electrode directly in the ground as required complete in all respects.
50
1567
78375
... More
SAFETY EQUIPMENTS:- Providing and fixing MV danger notice plate of 200 mm x 150 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.
2
237
475
... More
Providing and fixing HT danger notice plate 250 mm x 200 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.
2
247
494
... More
Supplying and Fixing of Fire buckets, round bottom made of G.I. Sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.
4
484
1938
... More
Supplying & Laying of 1800 mm x 900 mm X 12 mm thick chequered rubber matting of tested quality
2
2707
5415
... More
Supply and fixing danger board fabricated from 10 gauge MS sheet as per IE Rules
2
91
182.4
... More
S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T & P for proper completion of work.
2
299
598.5
... More
Providing & fixing in position 1000 mm wide, Electrical Insulating Mats, 2mm thick, suitable upto 1.1 KV grade including cutting to required length complete as required per specifications or upto the satisfaction of engineer-in-charge.
5
1144
5723.75
... More
Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as reqd.
5
1691
8455
... More
Supply of Tool & First Aid Box with all necessary tools for maintenance of electrical installation & First aid.
2
902
1805
... More
COST OF SUBMERSIBLE PUMP WITH BORING
1
322646
322646.6
... More
COST OF HAND PUMP
1
47621
47621.18
... More
G.S.T Extra as per applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%