Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date23 Mar 2024
Closing Date30 Mar 2024
Tender Amount₹ 4,74,97,000
Costs
EMD
₹ 9,50,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPPRC_919862_1Bid Award Id
ViewTender No
118/UPPCL/GM1/2023-24/E-TENDER Dated-01.03.2024Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
0.00 LVL. TO 1.50 MTR.
27.2
3746
137.75
1.50 LVL. TO 3.00 MTR.
9.07
1464
161.5
Filling of disposal of earth (17 km)
10.88
4403
404.7
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all material,labour and T&P etc. required for proper completion of work and curing complete,including cost of form- work, in foundation and floors.
2.41
11218
4655
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313(PartII 1981)Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1)Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5)Treatment of soil along external perimeter of building 7.5 liters/sqm. (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)
20.14
4170
207.1
R.C.C.work with cement,approved coarse sand and 20 mm gauge approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its binding,but including its fixing and binding the same with 24 B.W.G.G.I. binding wire, and including necessary centering and shuttering etc. and also including supply of all matreials, labour and T&P etc. required for proper completion of the work.Binding wire cost being included in the item. R.C.C.work in lintels
-
-
-
Same as above for First floor
1.41
12264
8698.45
Same as above for Second floor
4.61
40500
8785.43
Same as above for Terrace floor
0.59
5235
8873.29
Same as Item No. 6 but for R.C.C. work in [ Slab ]
-
-
-
Same as above for Ground floor
1.66
14666
8835
Same as above for First floor
27.83
248336
8923.35
Same as above for Second floor
154.81
1395237
9012.58
Same as above for Terrace floor
32.18
292925
9102.71
Same as Item No. 6 but for R.C.C. work in [Beam]
-
-
-
Same as above for Basement floor
2.16
20109
9310
Same as above for Ground floor
8.54
79507
9310
Same as above for First floor
3.42
32158
9403.1
Same as above for Second floor
96.33
914858
9497.13
Same as above for Terrace floor
22.78
218508
9592.1
Same as item No. 6 but for R.C.C. work in Footings.
6.73
51148
7600
Same as Item No. 6 but R.C.C. work in columns.
-
-
-
Same as above for Ground floor
2.81
27495
9785
Same as above for First floor
2.05
20259
9882.85
Same as above for Second floor
48.2
481116
9981.68
Same as above for Terrace floor
15.9
160295
10081.5
Same as in item no. 10 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement and coarse sand)
-
-
-
Same as above for First floor
5.16
28544
5531.85
Same as above for Second floor
201.42
1125367
5587.17
Same as above for Terrace floor
73.61
415384
5643.04
Same as in item no. 11 but in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.
-
-
-
Same as above for First floor
1.62
9503
5866.25
Same as above for Second floor
30.89
183020
5924.91
Same as above for Terrace floor
18.09
108253
5984.16
P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
-
-
-
Same as above for Basement floor
12.17
71681
5890
Same as above for Ground floor
26.65
156968
5890
Same as above for First floor
35.69
210214
5890
Same as above for Second floor
456.06
2713055
5948.9
Same as above for Terrace floor
117.28
704663
6008.39
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand
-
-
-
Same as above for First floor
207.02
35547
171.71
Same as above for Second floor
1741.63
302050
173.43
Same as above for Terrace floor
404.41
70836
175.16
12 mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 fine sand.
-
-
-
Same as above for First floor
80.92
12741
157.46
Same as above for Second floor
754.68
120024
159.04
Same as above for Terrace floor
827.32
132892
160.63
Making grooves 10 to 12 mm wide x 8mm deep in plaster of the walls or in ceiling vertically or horizontally as required.
836.98
28624
34.2
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
-
-
-
Same as above for First floor
76.9
86364
1123.08
Same as above for Second floor
542.05
608765
1123.08
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
-
-
-
Same as above for First floor
2.5
2906
1162.6
Same as above for Second floor
45.43
52816
1162.6
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Area of slab over 0.50 sqm)
-
-
-
Same as above for First floor
123.77
434222
3508.3
Same as above for Second floor
395.51
1387567
3508.3
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (Area of slab upto 0.50 sqm)
-
-
-
Same as above for First floor
7.11
26375
3709.67
Same as above for Second floor
50.7
188080
3709.67
Supply and fixing of Kota stone in flooring 20 mm thick and joint with 1:2 cement and coarse sand with approved colouring materials to be given and even shade with 12 mm base coat (bedding) of 1:2 cement and coarse sand mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials,labour T&P etc. required for proper completion of the work excluding base concrete. Terrace floor
65.3
77419
1185.6
Supplying and fixing 10 to 12 mm thick kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand mortar finished with in its cement coloured slurry jointing and polishing of approved quality complete including supply of all materials,labour and T&P and etc. required for proper completion of the work. Terrace floor
6.09
8302
1363.25
Supply & fixing 6mm thick China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials labour and T & P etc required for proper completion of the work. Second floor
246.43
279993
1136.2
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Analyses rate
683.69
3392114
4961.48
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) (FOR ALUMINIUM DOOR CHAUKHATS)
1678.25
707550
421.6
P/F 4mm thick float glass panes with putty/nails of Modi/equivalent I.S.I. marked quality putty, brads and springs complete.
186.77
139227
745.45
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
84.53
189771
2245.02
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
575.3
279233
485.37
Wall painting (two coat) with plastic emulsion paint of approved brand & manufactue on dcorative wall surface to give an even shade including thoroughly brushing,clean all dirt,grease,loose pieces and prepared smooth.
-
-
-
Same as above for First floor
207.02
32253
155.8
Same as above for Second floor
1741.63
274062
157.36
Same as above for Terrace floor
404.41
64276
158.94
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).
-
-
-
Same as above for First floor
80.92
10415
128.71
Same as above for Second floor
754.68
97134
128.71
Same as above for Terrace floor
827.32
106484
128.71
Wall painting (two coat) with plastic emulsion paint of approved brand & manufactue on dcorative wall surface to give an even shade including thoroughly brushing,clean all dirt,grease,loose pieces and prepared smooth.
-
-
-
Same as above for Ground floor
51.92
8089
155.8
Same as above for First floor
206.09
32108
155.8
Same as above for Second floor
1136.17
178787
157.36
Same as above for Terrace floor
147.72
23478
158.94
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
5557.89
545673
98.18
Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .
38
18050
475
Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete
-
-
-
(a) 250 mm x 10mm
38
14440
380
(b) 200 mm x 10mm
38
10830
285
Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm
92
17480
190
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete.
46
31227
678.85
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
46
8500
184.79
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick
1312.12
1584201
1207.36
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
25.57
43360
1695.75
Providing and laying water proofing treatment in sunken portion of W.C., bathroom etc, by applying cement slurry mixed with water proofing cement compound consisting of applying :- (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 kg/Sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
101.17
41434
409.55
P/F curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete (a) 25 mm dia.
25
9559
382.36
Providing and fixing ISI marked flush door shutters (For Cupboard) conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a) 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws. Both Side Laminated
128.06
337913
2638.71
38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete.
68.92
576071
8358.55
Providing and fixing of wooden railing including top handrail complete in all respect.
19.11
262486
13735.58
Acoustical Wall Paneling Providing and Fixing Armstrong Channeled Woodworks perforated panels of width 128mm, thickness of 16mm and length 2550 mm, made of a high density particle board substrate with a laminated facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a (“Helmholtz” fluted perforation of 2mm width and 14mm of visible panel / 4mm width and 28mm visible panel) each. The panels shall provide a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece. The panels shall be mounted on special aluminum spines using clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge. This wood work shall be provided on walls upto level of 4880 mm from floor level over company made aluminum spines and sandwiching 50 mm thick 24 kg / mtr. density cube rock wool acoustical backing.
279.78
1505706
5381.75
Providing & fixing False ceiling Acoustical tiles of Armstrong make classiclite microlook / Insula make with NRC 0.5 of size 595 x 595 mm 15 mm Board edge in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 170 gsm/sqm) consisting of main “T” runner suitably spaced at joints to get required length and of size 24 x 38 mm made from 0.25mm thick(minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 x 600 mm & secondary cross “T” of length 600 m & size 24 x 25 mm made of 0.30 mm thick ( minimum) sheet to be interlocked at
2198.72
2986961
1358.5
Cement concrete with 20mm guage approved stone ballast, coarse sand & cement in the proportion of 1:2:4 (1 cement : 2 coarse sand : 4 graded) including supplly of all materials, T&P. etc. complete.
5.06
37013
7315
Cast cement concrete door sills, chaukhats,boundary posts,shelves and similar small work with cement approved coarse sand and 2 cm. (3/4 ") gauge approved stone ballast in the propotion 1:2:4 excluding supply of reinforcement and its fixing and binding the same 14 B.W.G.G.I. binding with including the cost of binding wire, moulds, all other materials, labour and tools and plants etc. required for proper completion of the works.
9.01
75323
8360
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade (a) Area of slab upto 0.50 sqm
5.67
21033
3709.67
Water Proofing
-
-
-
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level forunder ground structures as directed by Engineer-in-Charge and consisting of : Using rough kota stone.
1396.65
1509066
1080.49
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :Using rough Kota stone
908.87
1282760
1411.38
Dismantling brick work or stone work in lime or cement mortar including stacking of dismantled materials as directed by the Engineer-in-charge with in a distance of 60 metre (200 ft.)
131.21
58335
444.6
Dismantling R.C.C. work in cement mortar including stacking of dismantled materials as directed by the Engineer-in-charge with in a distance of 60 metre (200 ft.)
67.35
59887
889.2
Dismantling brick work or stone work in lime or cement mortar including stacking of dismantled materials as directed by the Engineer-in-charge with in a distance of 60 metre (200 ft.)
91.7
40769
444.6
Disposal of Malba (22 km)
290.26
107846
371.55
(B) INTERNAL WATER SUPPLY & SANITATION WORKS
-
-
-
SANITARY FIXTURES & ACCESSORIES : I
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required for European type W.C. pan with white plastic seat and lid
7
29195
4170.75
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.
9
17911
1990.22
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
9
9154
1017.17
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern
2
22230
11115.3
Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
3
7650
2550.28
Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge. 15mm nominal bore
7
1651
235.89
Providing and fixing CP Brass 32 mm size Bottal Trap of approved quality & make and as per thedirection of Enginer-in-charge.
11
7700
700.06
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.
5
2360
472.09
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms
5
628
125.69
Providing and fixing Toilet paper holder C.P. brass
7
3239
462.78
Providing & fixing 600x120x5 mm glass self with edges round off, supported on anodiesd aluminium angle framewith C.P. brass bracket and guard rail complete fixed with 40 mmlong screws, rawl plugs etc, complete.
2
1334
667.36
Providing and Fixing C.P. brass Ablution health faucet assembly with 1.20 m long braided PVC hose with mounting bracket fixed on wall complete.[FOR EWC] Make-ESSCO ALE-583
7
8778
1254
Supplying & Fixing of CP soap tray fixed to the wall with PVC rubber plug with CP brass screws- Make-ESSCO AEC-1131
9
8772
974.7
SOIL WASTE & VENT PIPES AND FITTINGS - II
-
-
-
Providing & fixing soil, waste and vent pipes.
-
-
-
a) 100mm dia centrifugally cast iron S & S pipe.
65
56281
865.87
b) 75mm dia centrifugally cast iron S & S pipe.
105
82580
786.48
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters.
-
-
-
a) 100mm
31
11832
381.68
b) 75mm
50
16168
323.37
Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.
-
-
-
a) For 100mm dia pipe.
29
6608
227.89
b) For 75mm dia pipe.
29
6515
224.68
Providing & fixing cast iron trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 100mm inlet & 75mm outlet.
11
13773
1252.15
Providing & fixing cast iron coller.
-
-
-
a) 100mm dia.
19
6167
324.61
b) 75mm dia.
23
4680
203.51
Providing and fixing plain cast iron S & S sanitary bend.
-
-
-
a) 100mm
7
2168
309.78
b) 75mm
9
2067
229.71
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.
-
-
-
a) 100mm
5
1829
365.99
b) 75mm
6
1830
305.02
Providing and fixing centrifugaly cast iron single equal plain junction of required degree.
-
-
-
a) 100x100x100mm
6
3176
529.34
b) 75x75x75mm
10
3729
372.92
Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste and vent pipes and fittings with paint of any colour such as chocolate, grey or buff etc. over a coat of primer (of approval quality) for new work
-
-
-
a) 100 mm
45
21242
472.06
b) 75 mm
55
19400
352.74
Providing and fixing cast iron terminal guard.
-
-
-
a) 100mm
3
926
308.7
b) 75mm
4
982
245.64
Providing & fixing 32 # G.I. Pipes spout including cutting & making good the walls etc.
70
29395
419.93
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 110mm diameter
195
47156
241.83
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. 110mm
19
3676
193.48
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm
20
4579
228.95
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
14
524
37.46
WATER SUPPLY PIPES AND FITTINGS - III
-
-
-
Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.
-
-
-
25mm dia nominal bore
25
8680
347.23
50mm dia nominal bore
25
15592
623.71
Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality.
-
-
-
25mm dia nominal bore.
25
280
11.22
50mm dia nominal bore.
25
463
18.52
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25mm dia nominal outer dia pipes
50
15705
314.1
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc.
-
-
-
15mm dia nominal outer dia pipes
65
21109
324.76
20mm dia nominal outer dia pipes
55
20848
379.07
25mm dia nominal outer dia pipes
45
20047
445.5
Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal bore
7
2324
332.13
Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore
1
437
437.89
Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore
30
12652
421.75
Providing & fixing C.P. Brass extension nipple(size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
14
679
48.55
Providing and fixing gun metal gate valve with wheel of approved quality.
-
-
-
25mm dia nominal bore
2
788
394.13
50mm dia nominal bore
1
689
689.08
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore
1
312
312.35
Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1500
10455
6.97
SCHEDULE OF QUANTITIES FOR INTERNAL SEWERAGE SYSTEM - IV
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
105
30315
288.72
Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
100mm diameter
5
1256
251.35
150mm diameter
105
41637
396.55
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.
-
-
-
100mm diameter S.W. Pipe
5
3238
647.7
150mm diameter S.W. Pipe
105
83158
791.99
Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design 150 x 100 mm. size P type With Sewer bricks conforming to IS : 4885
1
1840
1840.39
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). For Sewer Line
1
8645
8645.25
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar
4
1338
334.71
(C) INTERNAL ELECTRIFICATION WORKS
-
-
-
Wiring point for light with 1.5 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in PVC conduit with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthing wire drawn inside the conduit partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with modular type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash
102
63372
621.3
Wiring point for two ways light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with modular type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash
2
1816
908.2
Wiring point for fan with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with modular type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash
28
19019
679.25
Wiring point for exhaust fan with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with modular type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc complete in all respects as directed, including matching color wash
5
4465
893
Wiring point for plug 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with modular type switch & socket etc, complete in all respect including matching colour wash.
84
32718
389.5
Wiring point for call bell with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire drawn inside the conduit partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with modular type bell push or 2 pin socket etc complete in all respects including matching color wash
2
1238
619.4
Supply fixing and concealing of 25mm dia.2mm thick PVC conduit pipe with ISI mark embossed and with PVC acessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid,plastering with cement sand mortar finished to level with matching colour including cost of material labour and T & P etc required for proper completion of the work as per directions and to the satisfaction of engineer in charge. ( T.V. /Telephone)
610
41724
68.4
Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.
245
28162
114.95
Supply & wiring of submains with two number 4 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.
785
111116
141.55
Supply and wiring of submain 2 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 Sqmm FRLSH PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects.
625
121125
193.8
Supply and wiring of submain with 4 number 6 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 32 mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with two number 4 sq. mm FRLSH PVC insulated multistrand copper earth contunity wire drawn inside the conduit complete in all respect.
325
111150
342
Supply and wiring of submain with 4 number 10 sqmm . FRLSH PVC insulated 1100 V grade multistranded single core copper conductor cable in 32 mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with two number 10 SWG copper earth contunity wire including colour wash etc. complete in all respects.
415
199096
479.75
Supply & fixing of single wall bracket on matching M.D.F.E.G. board base etc. complete in all required. Cat. A
22
34485
1567.5
Supply & fixing ofrecess/Surface/Pendent mounting round 12 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects. Cat. AA
5
6412
1282.5
Supply & fixing of 12Watt to 15 Watt indoor Recess mounting LED Square fitting for Armstrong Ceiling having powder coated die cast Aluminium housing with heat sink, diffuser of Polycarbonate material and driver set complete in all respect. Cat. AAA
17
26001
1529.5
Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting complete including tube on surface complete in all respect. 1 X 22 W CAT-AAA
37
41828
1130.5
Supply and Fixing of LED Tube Light with batten suitable for up to 2X22 watt LED tube light fitting complete including tube on surface complete in all respect. 2 X 22 W CAT-AAA
21
35710
1700.5
Supply of Ceiling Fan with motor of A.C. Permanent insulation capacitor rating confirming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated volage 220/240 volts, 50 Hz, 1-ph A.C.the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. BEE 5 Star rated-1200mm sweep
28
47880
1710
Supply & fixing of Call Bell Of Approved Make on matching polished MDFEG board brass including connection etc. as required.
2
332
166.25
Supply & fixing of buzzer on polished MDFEG/Teak ply board including making connections etc. complete in all respect.
2
266
133
Supply and burying safe earthing Electorde T-19 (Hot Dip Galvanized), Length 2000 mm, outer pipe 50mm, inner pipe 25, terminal Dia 12mm ,outer G.I.pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Gavanized up to 100 mircon filled with crystalline conducative mixture (CCM) having anti corrosive & conducative property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaning capacity along with 30 cm squre C.I. frame with hinged cover & masonry housing (from electode terminal to switch board , cost of 25 x 3 G.I. strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified
2
12255
6127.5
Supply and burying of 40mm dia x 4.5 metres long G.I. pipe, vertically for earthing having 12mm dia. holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No.6 to 8SWG G.I.wire in G.I. pipe upto appron (and from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I.box with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
2
7744
3872.2
Supplying & Laying of 25mmx3mm G.I. Strip from earth electrode in ground as required complete in all respects.
325
27787
85.5
Supplying & Laying of 32mm x 6mm Copper Stripfrom earth electrode in ground as required complete in all respects.
125
131812
1054.5
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.
425
84787
199.5
Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve 6 - 32 amps.Cat. A
54
13338
247
Supply and fixing of 40 Amp. 4 Pole MCB (10KA) CAT A
3
6483
2161.25
Supply and fixing of 63 Amp. 4 Pole MCB (10KA) CAT A
3
6526
2175.5
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 600x480x200 mm. size
6
3705
617.5
Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work. 600x480x200 mm. size
6
9804
1634
Supply and fixing of surface/ flush mounting 4 way TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer Incharge. CAT A
1
3429
3429.5
Supply and fixing of surface/ flush mounting 6 way TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer Incharge. CAT A
4
16606
4151.5
Supply & fixing of Crimping, solder, less, copper ton electroplated lugs of Dowel/ismail make suitable for 1.5 sqmm to 6sqmm cables, including tapping with insulating tape, etc. complete in all respects.
177
2522
14.25
Supply and fixing of single pole MCB blanking plate CAT A
30
712
23.75
Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work.
8
4750
593.75
Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge.
7
10773
1539
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects.
28
3724
133
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.
5
926
185.25
Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly etc. complete as required.
5
3847
769.5
Supply & fixing hexagonal/Round G.P. Fan box of approved make made up of 1.0 mm thick ISI marked G.P. Sheet spot welded four to Eight holes of 25.4mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screwed fitted with 300mm round zink coated M.S. Bar x 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material labour, T & P etc required for proper completion of the work.
28
3990
142.5
Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.
28
13752
491.15
Supply and fixing of surface/ flush mounting 4 ways V TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer Incharge. CAT A
1
8132
8132
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.
-
-
-
35 sqmm 3.5 core
45
18040
400.9
120 sqmm 3.5 core
45
35226
782.8
300 sqmm 3.5 core
45
68955
1532.35
Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire
-
-
-
35 sqmm 3.5 core
1
169
169.1
120 sqmm 3.5 core
1
230
230.85
300 sqmm 3.5 core
1
479
479.75
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.
-
-
-
35 Sq.mm
4
117
29.45
120 Sq.mm
4
444
111.15
300 Sq.mm
4
1489
372.4
Supplying and drawing following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2 Pair
510
8124
15.93
Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
150
3945
26.3
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
-
-
-
Telephone socket outlet
8
758
94.82
TV antenna socket outlet
2
189
94.82
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 75mm X 75 mm X 60mm Deep
10
1115
111.55
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75 mm)
10
1936
193.61
Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.
10
1338
133.86
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
5
127
25.5
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required. 100 mm Dia
65
57642
886.8
Supply and installing of following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, jointed with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 450mm width x 62.5mm depth x 2.0mm thickness
85
52689
619.88
Point wiring for SP MCB controlled light points with 2 x 1.5 sq.mm FR PVC insulated stranded copper conductor wire in surface / recessed medium class PVC conduit, along with 1 No. 1.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.
27
13725
508.34
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
65
2486
38.25
Supply & erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required-Make: USHA Cat No. TURBO JET DLX 300mm sweep.
5
6982
1396.5
S/f of 10/20 pair Junction Boxes for Floors and building with Krone connectors , with connection and punching of same
1
7410
7410
(D) INTERNAL FIRE FIGHTING WORKS
-
-
-
Supplying & fixing single headed internal yard hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel, ISI marked, confirming to IS 5290(type A) with blank Gunmetal/Stainless Steel cap and chain as required: Single headed Gunmetal
1
5941
5941.05
Supplying & fixing orifice plate made out of 6 mm thick stainless steel(grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required:
1
1023
1023.47
Supplying & fixing 63 mm dia, 15m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. confirming to IS 636(type-A) as required: Gun Metal
1
4112
4112.92
Supplying & fixing First-aid hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic(Textile reinforced) type-2 as per IS:12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m
1
6669
6669.62
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle confirming to IS:903 suitable for instantaneous connection to interconnect hos pipe coupling as required. Gun Metal
1
1904
1904.25
Supply & fixing of fire extinguisher, ABC Type 6.00 kg. capacity(ISI Marked IS:15683 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD-2018
5
43225
8645
Supply & fixing of CO2 type fire extinguisher, 6.5 kg. capacity(ISI Marked IS:2878 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD-2018
5
94525
18905
Supply and hoisting of Sintex or equivalent high density polyethylene seemless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tnak should be ISI marked, Sintex or equivalent. For 500 litres
500
4750
9.5
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
43
97018
2256.24
Supplying, installation, testing & commissioning responce indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
15
3127
208.5
Supplying, installation, testing & commissioning of addressable fire control moudle complete as required.
5
11852
2370.4
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
2
6118
3059.32
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
2
5539
2769.95
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.
2
9080
4540.22
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
2
2516
1258.13
Supplying & laying of 2X1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
705
78804
111.78
Supplying & laying 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
605
23982
39.64
Supply/Fixing of self illuminated "EXIT" sings made out from not less than 4 mm of transparent acrylic sheet of 300 x 150 mm size with self illuminated plastic words of 100 mm height suspended from ceiling by means of M.S. chain or fixed of the walls as required and as directed at site..(MAKE : Agni Suraksha (ASES) / Securiton-aka /System Sensor)
2
8075
4037.5
(E) RAIN WATER HARVESTING
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-
-
-
In all kind of soil upto 1.5m depth
32.07
5223
162.88
In all kind of soil upto 1.5m to 3.0m. depth
32.07
7880
245.72
In all kind of soil upto 3.0m to 4.5m. depth
37.41
15390
411.41
Providing and laying in position cement concrete of specified grade excluding the ccost of centering and shuttering -All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
1.6
9342
5838.91
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
33.34
181899
5455.88
Reinforced cement concrete work inbeams, suspended floors, roofs having slope up to 15º landings, balconies, shelves, chajjas, intels, bands plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20mm nominal size)
1.88
15976
8498
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tnsile steel bars.
184.43
13006
70.52
Centring and shuttering including struting , proping etc and removal of form for : Suspended floors, roofs, landings, balconies and access platform.
1.88
1142
607.71
15mm cement plaster on rough side of single or half brick wall mix 1:4 (1 cement : 4 coarse sand)
94.53
26566
281.04
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
24
8778
365.75
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter
4
3350
837.68
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level. Drilling of 300mm dia bore hole manually.
50
23468
469.37
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia
50
27030
540.6
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
5.53
5709
1032.43
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
6.02
6247
1037.74
Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.
6.53
6776
1037.74
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge.
2
2345
1172.71
EXTERNAL PIPE NETWORK SYSTEM
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
150
49630
330.87
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
150mm diameter
100
46884
468.84
200mm diameter
45
29624
658.32
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) all-round S.W. pipesincluding bed concrete as per standard design :
-
-
-
150mm diameter S.W. Pipe
100
86821
868.21
200mm diameter S.W. Pipe
45
45546
1012.14
Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. a) Inside size 60x60 cm & 90 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
20
127192
6359.64
(F) BOUNDARY WALL
-
-
-
M.S. Grill
3552.16
222720
62.7
Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm.width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.
282.97
27419
96.9
(G) EXTERNAL ELECTRIFICATION WORK
1
3236650
3236650
(H) EARTH FILLING ON SITE
3303.68
1023149
309.7
(I) SOLAR LIGHT
1
2491000
2491000
(J) EXTENSION LIFT
-
-
-
10 PASSANGER P.A.R. NO. 3.1.3 Add Price for 2nd Floor
1
63000
63000
16 PASSANGER P.A.R. NO. 3.1.5 Add Price for 2nd Floor
1
77000
77000
10 PASSANGER P.A.R. NO. 3.1.3
2
2612000
1306000
16 PASSANGER P.A.R. NO. 3.1.5
2
3888000
1944000
G.S.T. Extra as per Applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements