Uttar Pradesh Power Transmission Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Power Transmission Corporation Limited - UPPTCL Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date14 Feb 2024
Closing Date15 Apr 2024
Tender Amount₹ 2,29,25,484
Costs
EMD
₹ 4,59,000Document Cost
₹ 11,800Tender Fee
Refer Documents
Summary
Civil Maintenance Upkeeping Work At Various Volts Transmission Sub Stations Under Jurisdiction Of Electricity Transmission Circleii Varanasi
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPCTL_896234_1Bid Award Id
ViewTender No
62/ECTC,PRG/2023-24Tender Authority
Uttar Pradesh Power Transmission Corporation Limited ViewPurchaser Address
-Website
http://https://upenergy.in/upptcl
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavation in foundation in soil mixed with gravel and boulder requiring the use of special T&P such as pickaxes, sabbals etc including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation . (CSI No. 4.06)
40
10440
261
Clearing jungle including uprooting of rank vegetations,grass, bush, wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. (CSI No. 4.08)
4000
32000
8
Cleaning of grass and removal of rubbish upto a distance of 50 M outside the UPPCL area cleaned. (CSI No.4.09)
1000
3000
3
Levelling and dressing and making proper slopes including cutting and filling of earth upto a depth 100mm if so required including all labour T&P etc. required for proper completion of the work . (CSI No. 4.11)
1000
4000
4
Concrete with 4cm gauge I class brick ballast, coarse sand and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 )
50
264500
5290
Concrete with 4cm gauge stone ballast, coarse sand & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.02)
30
174600
5820
Concrete with 4 cm gauge 1st class brick ballast, coarse sand and cement in proportion of 8:4:1 in foundation & under floors including supply of all materials, labour & T&P etc. complete. (CSI no. 5.04)
40
228240
5706
Concrete with 4cm gauge stone ballast, coarse sand and cement in proportion of 8:4:1 in foundation & under floors including supply of all materials, labour & T&P etc. complete. (CSI no. 5.04a)
20
124560
6228
Concreting of 40 mm thick RCC trench covers in mild steel frame work with RCC 1:1.5:3 in Cement, coarse sand and 2cm gauge graded hard stone ballast with 3mm thick floating coat of neat cement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (CSI No. 5.18)
600
223800
373
Concrete work with 40 mm gauge brick ballast obtained from breaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in CSI no. 5.01 including cost of all labour, materials, T&P etc required for proper completion of work. (CSI No. 5.20)
20
73980
3699
Cement concrete with 2cm gauge approved hard stone ballast, coarse sand and cement in proportion of 3:1.5:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work (CSI No. 5.21)
80
639120
7989
Precast cement concrete door sills, chaukhats boundary posts, shelves and similar small work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast in the proportion 1:1.5:3, excluding reinforcement but including fixig the same in position including cost of all other material, labour and T&P . (CSI No. 5.22)
2
19100
9550
RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.23)
10
92050
9205
RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in slab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P (CSI No. 5.24)
4
42400
10600
RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in raft foundation and footings , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.27)
30
264030
8801
RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in RCC pile caping, gantry walls/column foundations and RCC pedestals , excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (CSI No. 5.28)
10
90760
9076
RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3 in RCC T beam-slab and column, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.29)
10
116470
11647
First class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01)
100
592500
5925
First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour & T&P etc. required for proper completion of work (CSI No. 6.03)
150
918300
6122
First class brick work in 1:6 cement and coarse sand mortar in superstructure including necessary cutting & moulding of bricks as required for one brick thick wall including supply of all materials, labour & T&P etc. required for proper completion of work. including extra labour. ( CSI 6.01+6.07+6.08)
60
397440
6624
First class brick work in 1:4 cement and coarse sand mortar in superstructure including necessary cutting & moulding of bricks as required for half brick (115mm) thickness wall including supply of all materials, labour & T&P etc. required for proper completion of work.including extra labour (CSI 6.03+6.07+6.09)
50
349100
6982
First class brick work in 1:4 cement and coarse sand mortar in super structure in steps, parapet and facia including nacessary cutting moulding of bricks and including supply of all materials labour & T & P required for proper completion of the work including placing & fixing of reinforcement in position with 24 B.W.G. binding wire with centering shuttering complete but excluding cost of reinforcement and its bending which shall be measured separately. (CSI No. 6.17)
20
161060
8053
Brick work in foundation & plinth with old dismantled bricks (supplied by department free of cost) and coarse sand mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete.(CSI No. 6.18)
40
116840
2921
Brick work in super structure for 230 mm brick thick wall with old dismantled bricks (supplied by department free of cost) and coarse sand mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete.(CSI No. 6.19)
20
72400
3620
Removal of cement mortar from dismantled bricks and stacking in countable position at place as directed by the Engineer in charge, including cost of all labour and T&P required for proper completion of work. (CSI No. 6.22)
20
27440
1372
Supply and filling brick bat in soak pit including all labour,material and T&P etc complete. (for 01 soak pit) (CSI No. 6.23)
10
14930
1493
Supply and fixing of 32 mm. thick Shisham wood part panelled and part glazed door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.)(CSI No. 8.25)
20
67680
3384
Supply and fixing of 32 mm. thick Shishum wood fully panelled. door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.)(CSI No. 8.26)
20
76920
3846
Supply and fixing of 32 mm. thick Shishum wood fully glazed. door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.)(CSI No. 8.27)
20
61100
3055
Supply and fixing of 35 mm. thick C.P.Teak wood door and window Jali shutters with panels of heavy quality galvanized iron wire mesh of size 14 x 24 with necessary beading including supply and fixing of wooden cleats and stops and including fixing and adjustment of hinges. but excluding supply of fixtures. (CSI No. 8.38)
10
33920
3392
S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of Shishum wood battens 8cm x 1cm and including supply and fixing of necessary screws, all materials,labour and T&P etc. required for proper complete. (CSI No. 8.44)
50
50150
1003
Providing and fixing 1.2 cm thick and 15 cm wide wooden pelmets with 19 mm dia alluminium curtain rod and bracket, top closed with same wood plank 1.2 cm thick including fixing with 2.5 x 0.3 cm M.S. flat 20 cm long and plug etc. complete with painting polishing or oiling as required made of with Shisham wood (CSI No. 8.49)
100
45600
456
Fixing of Departmental doors & windows shutters including supply & fixing of hinges and other fixtures.(excluding their supply) including all materials, labour & T&P etc. required for proper completion of work. (CSI No. 8.51)
50
49550
991
S/Fixing of double action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge. including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.52)
20
200320
10016
S/Fixing of single action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge. including cost of all other material, labour, tools & plants etc. complete .(CSI No. 8.53)
20
92120
4606
Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work. (CSI No. 8.54)
100
192800
1928
Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. (CSI No. 8.57)
40
62360
1559
Supply and fixing Anodized Aluminium Door fittings like 2 no 150 mm handles,2 no 250 mm tower bolt, 1 no stopper and 1 no 12 mm belan including all materials, labour & T&P etc. required for proper completion of work.(CSI No. 8.58)
50
21850
437
Supply and fixing Anodized Aluminium Window fittings like 2 no 100 mm handles,2 no 150 mm tower bolt, 1 no stopper including all materials, labour & T&P etc. required for proper completion of work. (CSI No. 8.59)
50
11150
223
Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01)
3
297192
99064
Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials when steel is to be provided by the department(CSI No. 9.02)
1
32734
32734
TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03)
6
528408
88068
TMT/Tor steel in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates)when steel is to be provided by the department wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (CSI No. 9.04)
1
22785
22785
Mild steel or Iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage labour and T&P etc required for proper completion of the work. Steel shall not be supplied by department . (CSI No. 9.05)
1
77348
77348
Providing and fixing barbed wire fencing including making bundles and stacking etc.complete.(labour rates only) . (CSI No. 9.06)
200
640
3.2
Providing and Fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. the weight of hot dipped GI barbed wire having 12 SWG - 2 ply wires and 4 point ordinary barbs @ 150 mm (approx) C/C should be 100 gm per Meter. (CSI No. 9.07)
1000
11000
11
Supplying and fixing rolling shutters of approved make made of 80x1.25 mm. Gauge cold rolled M.S. lathes inter locked through out their inner length and joined together at the end by end lock guides & arrangements for inside and outside locking with push &pull operation complete but excluding the cost of top cover and springs. CSI No. 9.08)
40
92440
2311
P/F 27.5cm. long wire spring grades 2 for rolling shutters. (CSI No. 9.09)
30
15180
506
Providing and fixing top cover rolling shutters. (CSI No. 9.10)
30
15090
503
Providing & fixing ball bearing for rolling shutters. (CSI No. 9.11)
30
16830
561
Providing and fixing steel glazed window and ventilators of standard rolled Mann or Mahavir steel sections conforming to IS 7452-1974 as per drawing joints metered & welded with 100x14x3.15 mm holdfast embedded in cement concrete block 15x10x10 cm. Size of 1:3:6 proportion i.e. 1 part of cement 3 part of approved coarse sand & 6 part of graded stone (aggregated 20mm. Nominal size) S/F of glass panes of plain pin headed 4mm. Thick nuts glazing clips and special putty of approved make complete and including a cost of red oxide paint. The fabrication should conform to I.S.1038-1975. (Aluminum beading with rubber packing included). (CSI No. 9.17)
2
8524
4262
Supply and fixing galvanised mosquito proof jali (16x24 gauge) with M.S. flat of 20 x 3 mm. size, on both sides screwed or welded to window or door frame. (CSI No. 9.18)
100
72900
729
Providing M.S. Frames work, rack etc for R.C.C. Trench covers and edging with M.S. angles and M.S reinforcement including cutting, bending and welding as per approved drawing. The rate is including cost of all labour, materials etc. as required for proper completion of the work. (CSI No. 9.20)
6
578412
96402
S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . except cost of M.S angle and flat. (CSI No. 9.22)
120
56640
472
S/F 50x50mm, 8 gauge G.I. chain link fencing 1.8 M high including fixing to vertical posts, horizontal runners with 10mm dia. 40mm long bolts, nuts and washers complete with all material, labour and T&P etc. required for proper completion of work. Chain link of 8 gauge shall be galvanized by hot dipped method as per relevant IS Code. (Excluding cost of vertical posts and horizontal runners) (CSI No. 9.23)
120
96840
807
Grouting of vertical or inclined post of pale/chain/security fencing in true level, alignment and in plumb or inclination as required, including cost of all labour, materials and T&P required for proper completion of work. ( Post and concrete for grouting shall be measured separately) (CSI No. 9.28)
100
5600
56
P/F in position collapsible steel shutter with vertical channels 20 x 10 x 2 mm.(3/4" x 3/8"x 1/12") and braced with flat iron diagonals 20 x 5 mm.(3/4" x 3/16") size with top and bottom rails of "T"iron 40 x 40 x 6 mm. (1/2" x 1-1/2" x 1/4") with 38 mm dia steel pullys with bolts, nuts, nuts locking arrangement, stoppers, handles complete including applying a priming coat of approved Red oxide paints. (CSI No. 9.29)
30
188280
6276
Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only) . (CSI No. 9.30)
100
1300
13
Fixing of cable trench racks in proper position and alignment including cost of all labour, material and T&Petc. required for proper completion of the work (Labour rate only).(CSI No. 9.33)
1000
11000
11
Providing & fixing 1 mm.thick M.S. sheet garrage door with frame of 40x40x6mm angle iron, diagonal bracings with 50x5 mm flat and 5 mm thick M.S. gusset plates at the junctions and corners including supply and fixing of necessary fitting, 2 no lock rail of 16 dia,375 mm long and including pintel hooks at the top and bottom, applying a priming coat of red oxide paint on all sides complete . (CSI No. 9.34)
20
72020
3601
P/F Concertina coilfencing with required dia. 600 mm upto 3 M height of wall between existing angle iron ‘Y’ shaped placed 2.4 M or 3.0 M apart and with 6 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete ( No. of rounds will be 7 to 8 in one Meter length) as per direction of Engineer I/C with reinforced barbed tape (R.B.T.)/ Spring core (2.5mm thick ) wire of high tensile strength of 165 kg/Sqmm with tape ( 0.52 mm thick ) of supreme make or equivalent and weight 43.478 gm/meter ( cost of MS angle, C.C. blocks shall be paid separately).(CSI No. 9.37)
1000
337000
337
6 mm thick Chequered plate trench covers with 40 x 40 x 5 angle support on two sides across the trench section and 12mm dia rectangular reinforcement hook complete with all labour, materials, welding and cutting etc including all T&P required. (CSI No 9.41 )
20
92780
4639
Supply and fixing 24 B.W.G , G.C. Iron Sheet roofing .fixed in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. (CSI No. 10.01)
120
81480
679
Supply and fixing 22 B.W.G. Galvanized Iron Ridges valley and gutters for roofing fixed with J or U bolts 10mm. dia with G.I. Limpet & bitumen washers including supply of all Materials, labour,wastage and T&P etc.required for proper completion of the work. (CSI No. 10.02)
150
74850
499
Supply and fixing ridges, valley and gutters of 6 mm thick grey corrugated asbestos sheet. for roofing fixed in position with J or U bolts 10mm. dia with G.I. Limpet & bitumen washers including supply of all Materials, labour,wastage and T&P etc.required for proper completion of the work. (CSI No. 10.03)
140
81340
581
Supply and fixing with ridges, valley and gutters of asbestos sheets. fixed with J or U bolts 10mm. dia with G.I. Limpet & bitumen washers including supply of all Materials, labour,wastage and T&P etc.required for proper completion of the work. (CSI No. 10.04)
100
49100
491
Supply and laying one layer of tar felt or any other equivalent approved material at the junction of wall & roof or at any place as per direction of the Engineer-Incharge including necessary overlap, applying a coat of approved mastic paint below the Tar felt & including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.06)
50
20850
417
Making expansion joints with 24 gauge Aluminium sheet in walls with necessary cutting shaping of bricks if any & covering joints by 10 mm Ply wood , 150 mm wide. (CSI No. 10.08)
100
12300
123
Supply and fixing 50 mm dia 150 mm long G.I. pipe in chhajja as spout including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.10)
25
2200
88
Supply and painting of 85/25 grade bitumen paint over roof @ 1.7 Kg/ sq.m.and spreading 6 mm.size grit over it @ 1 cft /100 Sq.Ft. including sweeping, cleaning the roof with brush, heating the paint to required temterature and supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 10.12)
200
42600
213
Supply and fixing 6mm thick polycarbonate multiwall sheet ,fixing in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. (CSI No. 10.13)
120
85200
710
12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.07)
3000
594000
198
12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work. (CSI No. 11.09)
1430
267410
187
Add for extra labour and materials for plaster over rough face of one brick thick wall. (CSI No. 11.12)
4000
104000
26
Engraving lines in the plaster of the outer face wall vertically and horizontally to display the surface as stone facing as directed by the engineer incharge including labour and T&P etc. required for proper completion of the work (Add for extra labour and T&P etc. required for proper completion of the work (Add for extra labour to all items of plaster). (CSI No. 11.14)
200
7000
35
S/mixing approved water proofing compound (CICO,DR FIXIT etc) in cement mortar in plaster or concrete work in the proportion as recommended by the manufacturer.(CSI No. 11.15)
50
2350
47
Providing (12x15) mm section groove in plaster including all material, labour and T&P etc. required for proper completion of the work. (CSI No. 11.16)
500
6000
12
6 mm. thick plaster with 1:3 cement & coarse sand including labour, materials & T&P etc. required for proper completion of the work. (CSI No. 11.17)
400
69600
174
Champering the edge of concrete in auxiliary structure, of size 25 mm wide in triangular section including all materials, labour & T&P etc complete. (CSI No.11.18)
700
6300
9
Making drip coarse (25x12) mm in 1:2 cement and coarse sand including supply of all materials, labour and T&P etc required for proper completion of work.(CSI No. 11.19)
100
1200
12
3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.) (CSI No. 11.20)
1000
21000
21
First class bricks on edge floor laid dry, joints sand filled, including preparation of base to proper slope and its ramming including supply of all material labour & T&P etc. required for proper completion of the work. (CSI No. 12.07)
100
64900
649
First class bricks on laid flat dry, joints sand filled, including preparation of base to proper slope and its ramming including supply of all material labour & T&P etc. required for proper completion of the work. (CSI No. 12.08)
200
87800
439
Straight over burnt bricks on edge floor laid dry, joints sand filled, including preparation of base to proper slope and its ramming including supply of all material labour & T&P etc. required for proper completion of the work. (CSI No. 12.09)
300
190800
636
Supply and Laying 8 mm thick glazed floor tiles of Somany, Johnson or equivalent make, , laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 12.11)
300
329100
1097
Supply and Laying 6 mm thick glazed tiles in skirting / dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete,including supply of all materials, labour and T&P etc. completion required for proper completion of the work. (CSI No. 12.12)
300
228000
760
Providing and fixing glass strips of 3.15 mm thickness & 25mm depth in joints of floor and skirting at the time of laying floors, flush with floor level including supply of all materials, labour& T&P etc. required for proper completion of work. (CSI No. 12.13)
140
4200
30
First class brick on edge floor-laid in cement mortar consisting of one part of cement and six parts of coarse sand and pointed with cement mortar 1:2 over and including all materials, labour, T&P etc.required for proper completion of work. (CSI No. 12.15)
80
58640
733
Providing and laying 18 mm. thick Kota stone in flooring or skirting over base cement mortar 1:4 mix and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete and including supply of all materials labour and T&P etc required for proper completion of the work. (CSI No. 12.17)
80
101280
1266
Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.18)
200
269400
1347
Providing and laying floor of 8 mm thick vitrified tiles in flooring or skirting with adhesive of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , on existing smooth floor ,including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required for proper completion of the work.(CSI No. 12.19)
160
157280
983
Providing and laying of 16 mm thick granite ( black/ brown) in flooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. (CSI No.12.20)
50
175000
3500
S/F 10mm thick Group 25 acid resisting tiles of “Somany” or equivalent approved make in flooring or skirting (confirming to I.S. 4457 - 1967) in ordinary Portland cement and coarse sand in ratio 1:3 with the joints filled with acid resistant cement “Accocide” of A.C.C. or equivalent make acid resistant cement and liquid supplied with cement, mixed in 1:3 ratio to make a workable paste in G.I. Tray. The joints should be kept as 5mm and to be cured for 7 days with dilute HCL (One part acid and three parts of water). Rate should be including the cost of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 12.22)
120
168000
1400
Supply of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but excluding G.S.T. which shall be paid extra as per rules. (CSI No.12.23)
120
119040
992
2.50 cm thick 1:1.5:3 cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC. (CSI No. 12.26)
1200
646800
539
4.0 cm thick 1:1.5:3 cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC. (CSI No. 12.28)
1200
920400
767
Providing and laying of 16 mm thick baroda green stone in flooring or skirting,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. (CSI No.12.30)
40
68080
1702
Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.(CSI No. 13.01)
1000
77000
77
Painting every coat after first coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950 (CSI No. 13.02)
1500
54000
36
Painting or varnishing new iron work in small areas previously painted old wood or iron work coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950.(CSI No. 13.03)
500
24500
49
Painting roofs or other iron work with one coat of ready mixed priming coat of approved make (redboxide) including., supply of all materials, labour & T&P etc for proper completion of work. (CSI No. 13.04)
500
32500
65
Painting roofs or other iron work every coat after first coat of ready mixed priming coat of approved make (redboxide) after first coat including., supply of all materials, labour & T&P etc for proper completion of work. (CSI No. 13.05)
150
4200
28
Painting roofs or other iron work for every coat on previously painted old surface approved make (redboxide) including., supply of all materials, labour & T&P etc for proper completion of work. (CSI No. 13.06)
150
6150
41
Removing paint or varnish with paint remover or with caustic soda including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.07)
700
60200
86
One priming coat and one coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.08)
200
13800
69
Every coat after first Coat of oil bound distemper including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.09)
1200
33600
28
One coat oil bound distemper on previously old oil bound distemper surface including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.10)
4000
140000
35
Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20)
2400
213600
89
Applying BIRLA PUTTY or equivalent putty on previousaly birla putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21)
10000
430000
43
Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22)
1000
98000
98
Painting every coat after first coat with APEX or equivalent brand weather coat paint on including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.23)
14650
644600
44
Painting one coat with APEX or equivalent brand weather coat paint on previousaly painted surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.24)
12000
780000
65
Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed new surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25)
400
39200
98
Painting every coat after first coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed. (CSI No. 13.26)
12000
528000
44
Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) on previously painted wall surfaces over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.27)
10000
650000
65
Spirit polish over previously polished wood surface after rubbing down the surface, with sand paper to give smooth and shining surface including cost of all materials, labour, T&P required for proper completion of the work. (CSI No. 13.30)
100
7900
79
Cement washing one coat with slack lime in ratio 1:2 (Cement : lime ) including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 14.09)
200
2400
12
Cement washing every coat after one caot with slack lime in ratio 1:2 (Cement : lime ) including supply of all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 14.10)
100
1100
11
Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres.(CSI No. 15.01)
60
34980
583
Dismantling brick work or stone work in mud mortor and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres. (CSI No. 15.02)
20
5820
291
Dismantling reinforced cement concrete or reinforced brick work, including stacking of dismantled materials as directed by the Engineer-Incharge within a distance of 60 metres. (CSI No. 15.03)
40
51720
1293
Dismantling Jack arched or wooden beam and barga roofs including beam roof concrete only and including stacking of dismantled materials as directed by the Engineer incharge within a distance of 60 metres. (CSI No. 15.04)
10
1780
178
Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer In-charge within a distance of 60 metres. (CSI No. 15.05)
1000
67000
67
Dismantling corrugated iron & asbastas roof sheet and stacking of materials as directed by Engg-in-charge within a distance of 60 mtrs. (CSI No. 15.07)
10
470
47
Dismantling of griders, trusses and other steel works including stcking of materials as directed by Engg-in-charge within a distance of 60 mtrs. (CSI No. 15.08)
2
38498
19249
Dismantling doors or window leaves including stacking of materials as directed by the Engineer I/C within a dist. 60 M. (CSI No. 15.09)
50
1750
35
Dismantaling doors and windows chowkhats including stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. (CSI No. 15.10)
50
3700
74
Dismantling existing plaster including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11)
2000
94000
47
Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12)
6000
90000
15
Dismantling of existing pale / security / chain link fencing including post and stacking properly as per direction of the Engineer - in - charge. Including all labour and T&P etc. required for proper completion of the work. (CSI No. 15.13)
50
6700
134
Dismantling of existing damaged Mud Faska over the roof. Cleaning the surface with wire brush, removal and disposal of rubbish at a distace 100 Meters also including the cost of cleaning and stacking of usable materials etc., including all labour, material required for proper completion of work. (CSI No. 15.14)
10
1600
160
Dismantling of existing R.C.C. Gantry/ Auxiliary foundation with the help of mechanical means in switchyard including disposal of refuse/ debris as per direction of Engineer - in - charge. Including all labour and T&P etc. required for proper completion of the work. (CSI No. 15.15)
10
20870
2087
Dismantling of dry B.O.E. Floor and proper stacking of dismantled bricks as per direction of E/C. up to 60 m lead. (CSI No. 15.16)
100
14100
141
Dismantling of dry flat brick soling Floor and proper stacking of dismantled bricks as per direction of E/C. up to 60 m lead . (CSI No. 15.17)
100
10600
106
Dismantling and re-laying of dry B.O.E. floor including cost of all labour and T&P required for proper completion of work.(labour rates only) (CSI No. 15.18)
200
60400
302
Dismantling and re-laying of dry flat brick soling.. floor including cost of all labour and T&P required for proper completion of work.(labour rates only) (CSI No. 15.19)
200
43600
218
Pre-Construction anti-termite treatment, by creating a barrier under and around the columns pits, foundation trenches, under floors, junctions of Walls & floors, around the external perimetre of building, expansion joints, surrounding of pipes and conduits etc. (Plinth area of the building at ground floor only shall be measured as per I.S. 6313 (Part II 1981))with Eldrine emulsifiable 0.2% concentration or any other approved material such as Heptachlore or chlordance will be used. The consumption of emulsion shall be (i) Foundation and masonary @ 5 Ltrs/Sqm, (ii) Back fills in immediate contact of foundation@ 7.5 Ltrs. / Sqm, (iii) Top surface of Plinth filling @ 5 Ltrs / Sqm, ( iv) Junction of walls & floors @ 7.5 Ltrs / Sqm, (v) Soil along external perimetre of building @ 7.5 Ltrs / Sqm (vi) under apron of the building @ 5 Ltrs. /Sqm. The rates includes cost of all materials, labour, equipments, T&P complete. (CSI No. 17.01)
50
4300
86
Cleaning of existing W.B.M. surface & laying premix 40mm thick over a tack coat with graded approved grit, heating the paint to the required temperature & mixing either in mixture or hand drums including cartage of mixture or hand drums and, maintenance of side patries and watering them during operation and including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.08)
80
41040
513
Laying seal coat with 6 mm size graded stone grit and bitumen including heating the bitumen paint to required temperature including cartage and cost of materials, labour, T&P etc. required for propercompletion of work. (CSI No. 18.09)
150
16350
109
Scraping old painted surface including disposal of scraped material to a distance of 30 m. (100') as directed by Engineer - in - charge. (CSI No. 18.10)
200
8800
44
Laying cement concrete road slab in 1:1.5:3 consisting of 1 part cement 1.5part approved coarse sand and 3 part approved 20mm down graded stone aggregate over prepared sub grade after its rectification and bringing it to proper camber and shape,finishing with TRIMIX machine ,concrete hardner and making good to the satisfaction of E/I inclduing cost of all materials, labour and T&P etc. required for proper completion of the work . (CSI No. 18.13)
30
278100
9270
Filling of 20 mm. wide 100/150 mm. deep joint with coarse sand and saw dust mixed with hot bitumen etc. complete including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 18.14)
100
4600
46
Providing and laying non-pressure NP3 class RCC pipes with collars with stiff mixture of cement mortar in the proportion 1:2 (1-Cement, 2-Coarse sand) including testing of joints including cost of all material, labour, T&P etc. required for proper completion of the work.(CSI No. 18.16) (a)- 150 mm dia RCC pipe
10
11110
1111
b- 300 mm dia RCC pipe
10
16890
1689
c- 600 mm dia RCC pipe
10
36140
3614
d- 900 mm dia RCC pipe
10
53740
5374
Analysis of Rate for Construction of granular sub-base (GSB) by providing well graded Material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density complete as per the direction of Engineer In Charge.(CSI No. 18.17)
20
49340
2467
Analysis of Rate for providing, laying and spreading of graded stone aggregate water mixed macadam (WMM/WBM ) after mixing with water at OMC in mechanical mix plant , carriage of mixed material upto site by tipper, laying with 1 % PPC Cement and 3.5 % emulsion in uniform single layer on sub base /subgrade and compacting with road roller to acheive desired density complete as per the direction of Engineer In Charge. (Taking Output -225 Cum i.e. 495 Tonne )(CSI No. 18.18)
10
63680
6368
Analysis of Rate for providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.35 Kg Per Sqm on the prepared surface cleaned with hydraulic broom complete as per the direction of Engineer In Charge. (Taking Output -3500 SQM )(CSI No. 18.19)
100
1400
14
Providing and laying dense bituminous macadam (DBM) with 100-120 TPH batch type HMP producing an average out put of 75 Tonne per hour using crushed stone aggregate of specified grading premixed with bituminous binder as per job mix , tranporting and placing the hot mix complete as per the direction of Engineer In Charge. (Taking Output -195 Cum i.e. 450 Tonne )(CSI No. 18.20)
4
32548
8137
Developing the tubewell by the air compressor having a capacity of 8.5 CuM or by the borehole pumping set having the capacity of 0.7 CuM/sec as per direction of Engineer I/C. (CSI No. 19.01)
10
33290
3329
Arranging Chemical and bacteriological test of water from reputed lab and submission of report to E/I. (CSI No. 19.02)
4
8400
2100
Development of tubewell by O.P. Unit (5 HP to 10 HP submersible pump set), including bringing Column pipe for the OP unit, assembling, electric connections, running for required period, dismentling and taking out & carrying away and cleaning the site with cost of all labour, materials, T&P and fuel / Electricity Charges etc required for proper completion of work and as per direction of Engineer-in-charge. (CSI No. 19.14)
10
7150
715
Supply and fixing of G.I. ("B" class ) column pipes JTC/ JINDAL make with column coupling socket as required for proper completion of work including all labour material & T&P. (CSI No. 19.22) (a)80 mm dia.
20
19920
996
b)65 mm dia.
20
16400
820
c)40 mm dia.
20
11340
567
d)32 mm dia.
20
10240
512
Supply and fixing C.I. non-return valve ISI marked and approved make with nuts, bolts, packing etc complete including all labour material & T&P. (CSI No. 19.23) (a)80 mm dia.
2
8442
4221
b)65 mm dia.
2
5582
2791
d)50 mm dia.
2
4262
2131
d)40 mm dia.
2
2722
1361
Supply and stacking pee gravel properly at levelled ground for measurement as directed by Engineer I/C, including all labour, T&P required for proper completion of work. (CSI No. 19.25)
2
10752
5376
a)80/65 mm dia.
60
10440
174
b)50/40 mm dia.
60
9360
156
c)32 mm dia.
60
8880
148
Lowering of M.S. column pipe in tubewell including supply of nuts, and bolts, packing and also carriage of pipe from workshop to site including all labour, T&P etc. required for proper completion of the work. (CSI No. 19.27) (a)80/65 mm dia.
50
7800
156
b)50/40 mm dia.
50
7250
145
c)32 mm dia.
50
6300
126
Supply and installation of 5H.P. Kirloskar or equivalent make single stage, horizontal, self priming,three phase dewatering pumpset of specification Head 14/16 M, Discharge 13.6/10 LPS, solid handle size 15.5 mm, suction 80 mm, delivery 80 mm, RPM 1500 including cost of 80 mm dia G.I. pipe for suction (3M) and delivery (4.5 M). (CSI No. 19.29)
2
115632
57816
Supply and installation of 0.5 HP Kirloskar or equivalent make horizontal, self priming, single phase ,monoblock tullu pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.30)
4
19504
4876
Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser. (CSI No. 19.31) (a) for 1 HP pump set single phase
2
9378
4689
b) for 1.5/ 2 H.P pump set single phase
2
10698
5349
c) for 3 H.P pump set single phase
2
12238
6119
d) for 5 H.P pump set three phase
2
14878
7439
e) for 7.5 H.P pump set three phase
2
19278
9639
f) for 10 H.P pump set three phase
2
28078
14039
g) for 15 H.P pump set three phase
2
43478
21739
Supply & Installation of submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (CSI No. 19.32) (a) 1 HP outlet 32 mm dia. or more, Head 78/30,Discharge 1100/2800 LPH
2
37082
18541
b) 1.5 HP outlet 40mm dia. or more, Head 71/36, Discharge 2000/6000 LPH
2
41262
20631
c) 2 HP outlet 40mm dia. or more, Head 89/45, Discharge 2000/6000 LPH
2
43462
21731
d) 3 HP outlet 50 mm dia. or more, Head 60/24, Discharge 6000/14000 LPH
2
55562
27781
e) three phase 5 HP outlet 50 mm dia. or more, Head 60/24, Discharge 9000/24000 LPH
2
74262
37131
f) three phase 7.5 HP outlet 65 mm dia. or more, Head 57/46, Discharge 24000/30000 LPH
2
92962
46481
g) three phase 10 HP outlet 80 mm dia. or more, Head 63/31, Discharge 20000/50000 LPH
2
108362
54181
h) three phase 15 HP outlet 80 mm dia. or more, Head 57/28, Discharge 30000/65000 LPH
2
141362
70681
Supply and fixing of submersible cable Havels or equivalent make, for submersible pump complete in all respect. (CSI No. 19.33) (a) 1.5 mm2 for upto 1 H.P. Pump
60
4860
81
b) 2.5 mm2 for pump above 1 HP and up to 3 HP.
60
6180
103
c) 4.0 mm2 for pump above 3 HP and up to 7.5 H.P.
60
7800
130
d) 6.0 mm2 for pump above 7.5 HP and up to 15 H.P.
60
11100
185
Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.34)
400
16800
42
Maintenance of terraced roof including filling up cracks before rain with approved bituminous filler and stopping leaks during rain including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 20.01)
150
1200
8
Repair to plaster or pointing in patches including removal of old plaster 1:4 racking out joints to 1 cm.(3/8") depth,watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work .(CSI No. 11.07+20.02)
200
49500
247.5
Repair to 2.5 cm (1") cement concrete floor in patches including up to 10 cm.(4") depth renewing 8 cm.(3") base concrete consisting of one part cement, 4 parts aproved coarse sand and 8 parts of 4 cm.(1.5") gauge brick ballast as in C.C.floor consisting of one part cement 1.5 parts approved coarse sand and 3 parts approved stone grit including supply of all materials.labour and T&P etc. required for proper completion of the work.( without base) (CSI No. 12.26+20.03)
120
80850
673.75
Renewing panes of 4.8 to 5.7 mm glass including supply of glass with putty and brads including supply of all materials, labour and t&P etc. required for proper completion of the work.(CSI No. 20.04) (a) glass of 5 mm thick panes.
10
8540
854
(b) glass of 4 mm thick panes
10
8380
838
(c) glass of 3 mm thick panes
10
8310
831
Easing door and windows. (CSI No. 20.05)
10
980
98
Renewing door cleats including supply of all materials,labour & T&P etc. required for proper completion of the work. (CSI No. 20.06)
20
1120
56
Fixing panes of glass with and including putty brads and including supply of all materials,labour and T&P etc. required for proper completion of the work but excluding cost of glass. (CSI No. 20.07)
40
10200
255
Fixing panes of glass with wooden beading and including supply of all materials,labour and T&P etc. required for proper completion of the work but excluding cost of glass. (CSI No. 20.08)
10
2680
268
Cleaning panes of glass with spirit of caustic soda including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 20.09)
40
3560
89
Labour for fixing door bolts or hinges or tower bolts or hasp and staples or handles etc.to doors and window. (CSI No. 20.10)
20
580
29
Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.12)
40
74800
1870
Cleaning of inspection chamber including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. (CSI No. 20.13)
100
26100
261
Cleaning of main drain or width more than 300 mm.including disposal of waste refuses sludge out side the board's area including washing and cleaning by clean water completely as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.14)
4000
48000
12
Cleaning of main drain or width less than 300 mm including disposal of waste refuses sludge out side the board's area including washing and cleaning by clean water completely as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. (CSI No. 20.15)
2500
22500
9
Disposal of rubbish / debris out side the UPPCL area as per direction of Er/in- charge including cartage, labour and materials, T&P etc. required for proper completion of the work. (No. deduction for voids shall be made).(CSI No. 20.16)
150
56100
374
Supply and replacing of following chromium polished iron fittings including cost of nuts, bolts etc.complete. (a) L drops 16 mm dia x 300 long.
10
1870
187
(b)Tower bolts 10 mm dia x 250 mm long.
10
880
88
(c)Tower bolts 10 mm dia x 100 mm long.
10
640
64
(d)Iron hinges 100 mm size.12 gauge.thick
10
770
77
(e) Iron door spring.
10
1540
154
(f) M.S.handles 100 mm size
10
390
39
(g) M.S. chain kunda.
10
1050
105
(h) L-drop 16 mm dia x 200 mm long.
10
1490
149
Cleaning and opening of chocked W.C./ bath / kithchen pipe line including opening and refixing of chamber cover including washing etc. complete.(Analysis based on NBO - 11 25.020.(CSI No. 20.19)
50
13450
269
Opening, cleaning, overhauling, oiling and greasing of defective rolling shutter and also re setting of its springs for its smooth functioning including cost of all materials, labour and T&P etc.( Approx. size of shutter 2x2.5) (CSI No. 20.20)
50
46500
930
S/laying chicken mesh of (20 mm.)hexagonal heavy quality over roofs of joints of roof as per direction of the Engineer - in - charge.(CSI No. 20.21)
600
49800
83
Extraction of defective choked hand pump machine with variable length of pipe and strainer and reinsertion of complete assembly after its repairing such as welding of pipe handle jhoola and replacing strainer bolts nuts,washers,Rubber seats etc and also cleaning bore ole by boring etc. if necessary.(CSI No. 20.25)
10
6050
605
Cleaning of existing pipe line of different dia. ranging from 4" to 2" dia. including digging trenches and refilling, opening of pipes, cleaning of pipes, cutting, threading, if required fixing and including making good the road, wall etc as directed by the engineer I/C.(CSI No. 20.26a)
300
47100
157
Cleaning of existing water pipe line of different dia up to 2" dia including digging trenches and refilling,opening and cleaning of pipes,cutting,threading,if required fixing and including making good the road and wall etc. as directed by the Engineer in charge.(CSI No. 20.26b)
150
15750
105
Cleaning of R.C.C. over head tank up to capacity of one lac. Liters and chlorinating with bleaching power mixed to water as per direction of Engineer - in - charge complete.(CSI No. 20.27)
20
47800
2390
Extraction of defective VT submersible pumps and motor with 60" x 90" column pipe and then lowering of the repaired pump and motor with pipe and testing the same including checking main cut-out fuse and operation of Tube well for 24 hours fo rits smooth working with all cost of materials,labour and T&P etc required for the proper completion of the work.(CSI No. 20.28)
10
39440
3944
Supply and mixing bleaching powder in over head tank as required or as directed by Engineer - in - charge.(CSI No. 20.29)
50
4550
91
Supply and replacing of Angle Holder of "Anchor" or equivalent make of approved quality including all materials, labour and T&P etc.(CSI No. 22.01)
20
860
43
Supply and replacing of 6 Amp. piano tyre switch of " Anchor" or equivalent make of approved quality including all materials, labour and T&P etc. (CSI No. 22.02)
20
980
49
Supply and replacing of 6 Amp. Piano tyre socket of "Anchor" equivalent make of approved quality including all materials, labour and T&P etc.(CSI No. 22.03)
20
1200
60
Supply and replacing of 16 Amp.Piano type switch of "Anchor" or equivalent make of approved quality including all materials, labour and T&P etc. (CSI No. 22.04)
20
2620
131
Supply and replacing of 16 Amp.Piano type socket of "Anchor" or equivalent make of approved quality including all materials, labour and T&P etc. (CSI No. 22.05)
20
2620
131
Supply and laying 1.5 Sq.mm gauge copper wire of "Plaza" or equivalent make of approved quality including connecting with existing wiring in existing P.V.C.pipe. including all materials, labour and T&P complete.(CSI No. 22.06a)
30
2220
74
Supply and laying 2.5 Sq.mm gauge copper wire of "Plaza" or equivalent make of approved quality including connecting with existing wiring in existing P.V.C.pipe. including all materials, labour and T&P complete.(CSI No. 22.06b)
30
2880
96
Supply and laying 4.0 Sq.mm gauge copper wire of "Plaza" or equivalent make of approved quality including connecting with existing wiring in existing P.V.C.pipe. including all materials, labour and T&P complete.(CSI No. 22.06c)
50
6150
123
Supply and laying 6.0 Sq.mm gauge copper wire of "Plaza" or equivalent make of approved quality including connecting with existing wiring in existing P.V.C.pipe. including all materials, labour and T&P complete.(CSI No. 22.06d)
50
8900
178
Labour for fixing of electrical fittings such as switches / plug / socket / holder / cut out / ceiling rose / wooden board etc. complete.(CSI No. 22.07)
50
1050
21
(a) Cutting down trees (exceeding 30 cm. grith)grubbing up roots,filling pits and levelling off ground,lopping branches trimming removing (not exceeding 50 metres) and stacking serviceable materials and cleaning side.(CSI No. 22.12)
4
9296
2324
(b) Girth exceeding 100 cm and not exceeding 100 cm.
4
15916
3979
(c) Girth exceeding 150 cm and not exceeding 150 cm.
4
18580
4645
(d) Girth exceeding 200 cm and not exceeding 200 cm.
4
21848
5462
(e) Girth exceeding 250 cm. and not exceeding 250 cm.
4
25052
6263
Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work.(CSI No. 22.14)
50
27100
542
Providing broken glass (@ 19.50Kg / Sqm.) in 4 cm thick cement mortar to provide top surface circular & 2.5 cm. minimum thickness of grouting of glass pieces consisting one part of cement and three parts of approved coarse sand (cost of 4 cm. thickness ) etc.(CSI No. 22.15)
10
3760
376
Supplying stacks & filling zero grit in the base and the sides of the foundation to the required thickness, width & length including cost of all materials, labour and T&P etc all required for proper completion of the work.(CSI No. 22.16)
10
23403
2340.32
Supplying and providing II class bricks shuttering of 115 mm thick for laying zero grit including cost of bricks,labour, T&P etc.required for proper completion of the work.(CSI No. 22.17)
10
14050
1405
Attending to petty maintenance service like plumbing service,welder service, mansion service and carpenter service required.Job attending by one no. Plumber/welder/mason/carpenter with one no. helper per hour or part of an hour.(CSI No. 22.18)
160
18560
116
Supply and sprinkling of lime in all drains of colony and water logged area including cost of all labour,materials,and T&P etc, as required for proper completion of the work.(CSI No. 22.19)
100
1100
11
Cleaning of toilets of non-residential buildings including cost of detergent powder,horpic phenyl and suitable acid etc. as required for proper completion of the work.(CSI No. 22.22)
30
3090
103
Supply and stacking of compost manure at site including carriage upto 3 km ( Manure measured in stacks will be reduced by 8% for payment). (CSI No. 23.04)
10
15130
1513
Supply and stacking of local sand at site including charges of royalty and carriage of the same at site including all leads after 8 kms. (CSI No. 23.05)
10
4400
440
Supply and plantation of approved 2 years old plants duly planted in earthen Gamla of approximate size 300x 300 mm nominal size, filled with compost manure and sand mixed in approved proportion including cost of approved quality earthen gamla, compost manure, sand all other materials, labour and T&P etc reqd. for proper completion of work. (CSI No. 23.08)
100
16700
167
Supply and plantation of approved 2 years old plants duly planted in mosaic gamla of approximate size 300x 300 mm nominal size, filled with compost manure and sand mixed in approved proportion including cost of approved quality earthen gamla, compost manure, sand all other materials, labour and T&P etc reqd. for proper completion of work. mosaic gamla. (CSI No. 23.09)
100
23200
232
Supply and planting seasonal flower plants such as Genda, Rose, Ostar, Flox, Guldawadi,Gulmehndi, Cochia etc. including digging hole of proper size, manure and treatment with proper chemical etc., including cost of fertilizer, manure, all materials, labour and T&P etc complete in allrespects. (CSI No. 23.10)
100
4500
45
Supply and planting permanent ornamental plant like Croten, Varil pristal, Glodulus, Lily, Fern, Bogenbelia etc. including cost of plants, manure, pesticides, fertilizer, labour and T&P etc complete also including preparation of flower bed. (CSI No. 23.11)
100
6300
63
Supply and planting Ashoka, Pendula, Mango, Neem,Peepal,Sheesham etc in pits including cost of all materials, labour and T&p etc complete in all respects.(CSI No. 23.12)
100
15600
156
Supply and planting Desi Doob grass in lawn including cost of Doob, fertilizer, manure,labour, T&P and preparation of bed complete in all respects. (CSI No. 23.13)
100
3700
37
Supply and planting of Garden Grass (Australian). including cost of plants, manure, pesticides,fertilizer, labour and T&P etc complete also including preparation of bed.(CSI No. 23.14)
100
9000
90
Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01a)
150
36750
245
Providing and fixing 20 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01b)
50
14700
294
Providing and fixing 25 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01c)
50
20200
404
Providing and fixing 32 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01d)
50
24250
485
Providing and fixing 40 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01e)
50
28850
577
Providing and fixing 50 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01f)
50
37350
747
Providing and fixing 65 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01g)
50
45100
902
Providing and fixing 80 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01h)
50
55300
1106
Providing and fixing 100 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01i)
50
75750
1515
Making water connection of GI pipe line with GI Mains ( 25 mm to 100 mm ) dia. by providing and fixing Ferrule (25 mm dia) GI union and nipple including cutting and threading the pipe, inspection, testing, cutting and making good the road, executing bond with Nagar maha palika, fixing of pipe line upto the points near the building complete work including supply of all materials, labour and T&P etc. required for proper completion of work. (CSI No. 26.03)
2
1462
731
Providing & fixing half turn 15mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05a)
40
28080
702
Providing & fixing half turn 20mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05b)
10
9180
918
Providing & fixing half turn 25mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05c)
2
2514
1257
Providing & fixing half turn 32mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05d)
2
3216
1608
Providing & fixing half turn 40mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.. (CSI No. 26.05e)
2
3682
1841
Providing & fixing half turn 50mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05f)
2
4250
2125
Providing & fixing half turn 65mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.05g)
2
6486
3243
Providing & fixing half turn 80mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05h)
2
8554
4277
Providing & fixing half turn 100mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.05i)
2
11248
5624
Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06a)
10
2420
242
Providing & fixing BRASS FERRULE, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.08a)
4
1124
281
Providing & fixing BRASS FERRULE, 20 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work..(CSI No. 26.08b)
4
1588
397
Providing & fixing BRASS FERRULE, 25 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work..(CSI No. 26.08c)
4
2628
657
Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09a)
10
960
96
Providing and fixing PVC CONNECTION PIPE 450X15 mm WITH 2 BRASS UNITS ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09b)
20
2620
131
P/F GI UNIONS NOMINAL BORE 15 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.10a)
4
408
102
P/F GI UNIONS NOMINAL BORE 20 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work, (CSI No. 26.10b)
4
528
132
P/F GI UNIONS NOMINAL BORE 25 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work, (CSI No. 26.10c)
4
772
193
P/F GI UNIONS NOMINAL BORE 32 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work (CSI No. 26.10d)
2
590
295
P/F GI UNIONS NOMINAL BORE 40 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work (CSI No. 26.10e)
2
662
331
P/F GI UNIONS NOMINAL BORE 50 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work (CSI No. 26.10f)
2
962
481
P/F GI UNIONS NOMINAL BORE 65 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work (CSI No. 26.10g)
2
1264
632
P/F GI UNIONS NOMINAL BORE 80 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work (CSI No. 26.10h)
2
1686
843
P/F GI UNIONS NOMINAL BORE 100 mm, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work (CSI No. 26.10i)
2
2166
1083
Providing and fixing SLUICE VALVE, CI 80 mm dia. WITH Wheel. ISS:780 & ISS: 2906 class - I, 'MEC' make, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.11a)
2
10110
5055
SLUICE VALVE CI 100 mm dia. WITH Wheel. ISS:780 & ISS: 2906 class - I, 'MEC' make, ISI marked(CSI No. 26.11b)
4
22144
5536
Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completion of work. (CSI No. 26.12)
20000
220000
11
P/F BRASS BIB COCK, 15 mm dia (400 gsm) ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.13a)
20
7620
381
P/F BRASS BIB COCK 15 mm dia. 200 gms( L & K and equi.)ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.13b)
20
5060
253
Supply and fixing of 15 mm dia CI/ PVC bib cock including replacing of old bibcock complete.(CSI No. 26.13c)
50
3050
61
P/F BRASS STOP COCK, 15 mm dia ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.14a)
10
2260
226
Providing and fixing CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16a)
80
54240
678
P/F CP BRASS BIB COCK15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.)fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16b)
50
21000
420
P/F CP BRASS STOP COCK 15 mm dia. HEAVY QUALITY ( 400gm) ( L & K and equi.)fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16c)
10
6720
672
P/F CP BRASS BIB COCK 15 mm dia. HEAVY QUALITY ( 200gm) ( L & K and equi.)fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.16d)
10
4200
420
P/F CP BRASS SHOWER HEAVY QUALITY ( 225 gms )fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16e)
4
3200
800
P/F CP BRASS wash basin mixer HEAVY QUALITY ( L & K and equi.) fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.16f)
10
28560
2856
P/F CP BRASS wall mixer HEAVY QUALITY( L & K and equi.)fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.(CSI No. 26.16g)
4
15992
3998
P/F CP BRASS Angle Valve HEAVY QUALITY ( L&K or equi. )fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16i)
20
11420
571
P/F CP BRASS Piller cock HEAVY QUALITY ( L&K or equi. )fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16j)
20
13700
685
P/F CONCEALED STOP COCK HEAVY QUALITY ( L&K or equi. )fittings, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.16k)
20
16000
800
Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm for with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17)
160
47040
294
Providing and fixing 15 mm dia ISI Approved CPVC pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.19)
80
9760
122
Providing and fixing 20 mm dia ISI Approved CPVC pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.20)
200
28200
141
Providing and fixing 25 mm dia ISI Approved CPVC pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.21)
80
14400
180
Providing and fixing 32 mm dia ISI Approved CPVC pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.22)
30
7680
256
Providing and fixing 40 mm dia ISI Approved CPVC pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.23)
10
3460
346
Providing and fixing of 200 mm dia PVC pipe of 6 Kg/sqcm with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.24)
10
6790
679
Providing and fixing of 150 mm dia PVC pipe of 6 Kg/sqcm with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.25)
12
5424
452
Providing and fixing first quality white glazed "Orissa" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trap including supply of all materials,labour and T&P etc.complete. (CSI No. 27.01)
20
50060
2503
Providing and fixing first quality white glazed European type W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out "P" trap including supply of all materials,labour and T&P etc.complete. (CSI No. 27.02)
10
33030
3303
Providing and fixing PLASTIC SEAT COVER COMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKED including supply of all materials,labour and T&P etc.complete. (CSI No. 27.04)
10
10620
1062
Providing and fixing flat back 430X370X340 mm. size lipped front urinal basin of white glazed earthern ware first quality (Hindutan, Neycer make) I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work.(CSI No. 27.06)
10
21740
2174
Providing and fixing DIVISION PLATE 600X300 mm WHITE GLAZED FOR URINALS I.S.I. marked including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.07)
10
13980
1398
Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.08)
20
65660
3283
Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12)
20
28600
1430
Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.13)
20
2240
112
Providing and fixing in position 32 mm. dia P.V.C. WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.14)
20
1840
92
Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.15)
10
9690
969
Providing and fixing 750 mm x 20 mm size C.P. brass towel rail of approved quality including brackets including supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work. (CSI No. 27.16)
10
6170
617
Providing and fixing 450 mm x 20 mm size C.P. brass towel rail of approved quality including brackets including supply of all materials,labour and T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for work .(CSI No. 27.18)
10
5170
517
Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.19)
10
2720
272
Supply and fixing CP Nahani Trap India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21a)
10
7680
768
Supply and fixing 100 mm.PVC Trap India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21b)
2
1136
568
Removal of cinder from W.C. and bath and its disposal within 50 metres lead including cost of all labour and T&P etc. required for proper completion of the work. (CSI No. 27.22)
10
1370
137
Providing and fixing 100 mm dia white glazed "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.23)
4
2816
704
Providing and fixing 100 mm dia PVC "P" or "S" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24)
4
2216
554
Providing and fixing CI GRATING 100 mm dia including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.25)
30
1830
61
Providing and fixing Stainless Steel sink 610x450x200 mm Heavy Quality( ISI MARKED ) including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.26)
4
16412
4103
Providing and fixing CI COVER WITH FRAME COMPLETE 450 mm INTERNAL Dia. including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.27)
10
8800
880
Providing and fixing CI COVER WITH FRAME COMPLETE 300 mm INTERNAL Dia. including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.28)
10
4400
440
Providing and laying 110mm Dia SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.29c)
30
11940
398
Providing and fixing 110mm Dia SWR, PVC ( Finolex or equivalent ) Bends including cost of all materials, labour and T&P etc required for proper completion of the work.(CSI No. 27.30c)
10
1850
185
Providing and fixing 110mm dia SWR, PVC ( Finolex or equivalent )Trap including cost of all materials, labour and T&P etc required for proper completion of the work. (CSI No. 27.31c)
10
2290
229
Providing and fixing 110mm Dia SWR, PVC ( Finolex or equivalent ) Socket including cost of all materials, labour and T&P etc required for proper completion of the work. (CSI No. 27.32c)
10
1410
141
Providing and fixing 110mm Dia SWR, PVC ( Finolex or equivalent ) Coupler including cost of all materials, labour and T&P etc required for proper completion of the work. (CSI No. 27.33c)
10
1410
141
Providing and fixing 110mm Dia SWR, PVC ( Finolex or equivalent ) plain Tee including cost of all materials, labour and T&P etc required for proper completion of the work. (CSI No. 27.34c)
10
1960
196
Providing and fixing 110mm dia SWR, PVC ( Finolex or equivalent ) Door Tee including cost of all materials, labour and T&P etc required for proper completion of the work.(CSI No. 27.35c)
10
2440
244
Providing and fixing110mm Dia SWR, PVC ( Finolex or equivalent ) Door “Y” including cost of all materials, labour and T&P etc required for proper completion of the work. (CSI No. 27.36c)
10
3210
321
Removing of full way CI/Gun Metal Gate valve of 80/65 mm dia. With wheel.( Labor only) (CSI No. 28.01)
10
2780
278
S/F full way CI Gate valve of 63 mm dia. With wheel , BSI mark heavy quality including supply of all labour , material andT & P for proper completion of work . (CSI No. 28.02)
6
27144
4524
S/F full way 63/65 mm dia Fire hydrant Gun Metal Gate Valve heavy quality including supply of all labour , material andT & P for proper completion of work (CSI No. 28.03)
2
28656
14328
P/F Male & Female coupling 63/65 mm dia. Gun metal BSI marked confirming to IS:903 heavy quality including supply of all labour , material and T & P for proper completion of work (CSI No. 28.04)
6
32424
5404
P/F Short Branch pipe Gun Metal BSI marked heavy quality including supply of all labour , material and T & P for proper completion of work. (CSI No.28.05)
10
15540
1554
P/F 63 mm dia RLL Hose Pipe heavy quality having length 15.0 m including supply of all labour , material andT & P for proper completion of work. (CSI No. 28.06)
200
64400
322
P/F MS Hose Box Single Door with stand for 15 mt RRL Hose heavy quality including supply of all labour , material andT & P for proper completion of work. (CSI No. 28.07)
2
12556
6278
Placing of 10 KL PVC Tank over slab of 6 m staging including supply of all labour , material andT & P for proper completion of work.(CSI No.28.08)
2
10560
5280
Applying two coat Tapcrete mixed with White Cement and water to proper consistany on leaky surface including supply of all materials, labour etc. required for proper completion of work. (CSI No. 28.16)
600
69600
116
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work (CSI No. 28.19)
50
9700
194
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (CSI No. 28.21)
30
12930
431
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (CSI No. 28.22)
50
36150
723
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness. (CSI No. 28.23)
20
18000
900
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) (CSI No. 28.24)
10
5060
506
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester Powder coated aluminium (minimum thickness of powder coating 50 micron) (CSI No. 28.25)
10
5720
572
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.(CSI No. 28.26)
10
2780
278
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (CSI No. 28.27)
10
1110
111
Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profile white/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong Miniral Fobre Sound Absorbing Sheet (CSI No. 28.30)
50
71200
1424
Providing and fixing ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With ACP of 4.0 mm thickness.(CSI No. 28.31)
30
51450
1715
Wiring point for light with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash. (PWD ELE. SCH.2018,131C+187A)
20
13740
687
Wiring point for fan/fresh air fan with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash (PWD ELE. SCH.2018,133C+187A)
20
15040
752
Wiring point for plug with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour wash. (PWD ELE. SCH.2018,134C+187C)
20
8360
418
Wiring point for exhaust fan with 1.5 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, with 1.5 sq.mm.FRLSH PVC multistrained copper conductor cable as earthwire drawn inside the conduit,modular type switch and ceiling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc,complete in all respects,as directed,including matching colour was.(PWD ELE. SCH.2018,137C+187D)
10
9470
947
Supply and fixing and concealing of 20 mm dia 2 mm thick PVC conduit pipe with ISI marked embossed and with PVC accessories confirming to IS 3419 for drawing wires duly sealed at joints original resin/adhesive to make the complete piping rigid, plastering with cement sand mortor finished to the level with matching colour wash including cost of all materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,148A)
10
620
62
Supply and fixing and concealing of 25 mm dia 2 mm thick PVC conduit pipe with ISI marked embossed and with PVC accessories confirming to IS 3419 for drawing wires duly sealed at joints original resin/adhesive to make the complete piping rigid, plastering with cement sand mortor finished to the level with matching colour wash including cost of all materials, labour and T&P etc.required for proper completion of the work(PWD ELE. SCH.2018,148A) but for 25 mm dia 2 mm thick PVC conduit(PWD ELE. SCH.2018,149A)
10
720
72
Supply and fixing of 2/3/4 ways round steel junction box confirming to ISS for 20mm dia 16 guage (1.5mm) thick conduit concealed in wall, keeping its level upto plaster duly provided with proper size cover screwed as directed at site by Engineer-in-charge with supply of all material, labour & T&P etc. required for proper completion of work.(PWD ELE. SCH.2018,154)
10
310
31
Supply and fixing of 2/3/4 ways round steel junction box confirming to ISS for 25mm dia 16 guage (1.5mm) thick rigid steel conduit concealed in wall, keeping its level upto plaster duly provided with proper size cover screwed as directed at site by Engineer-in-charge with supply of all material, labour & T&P etc. required for proper completion of work. (PWD ELE. SCH.2018,155)
10
400
40
Supply and fixing of 32 Amp.240 V DP metal clad rewireable type switch fuse unit on MDFEG/Teak wood board including making connections etc.complete all respect.(PWD ELE. SCH.2018,305 CAT-B)
2
2880
1440
Supply and fixing of 63 Amp.415 V metal clad T.P rewireable type switch fuse unit on angle iron bracket including making connections etc.complete all respect.(PWD ELE. SCH.2018,313 CAT-B)
2
7680
3840
Supply and burying of 600 x 600 x 3 mm copper plate vertically for earthing with its top at least 3 mtr. below ground level complete with 20 mm dia G.I. Pipe and funnel for watering and one earthing lead of one no. 8 to 10 S.W.G. copper wire in 15 mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. Pipe and copper wire will be extra) 30 cm sq. C.I. frame with hinged cover masonary housing alternate layer of charcoal /coke & salt at least 150 mm thick alround etc.complete in all respects.(PWD ELE. SCH.2018,704)
2
20340
10170
S/F of one number 8 SWG G.I. wire in 15mm dia G.I.pipe for earthing,laid in ground or in wall duly concealed including the cost of cement,sand,labour,T&P and other materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,721)
2
400
200
Supply and fixing of 0.5 to 5.0 Amp. SP MCB (10 KA ) C Curve of approved make including making connections etc.complete all respect. (PWD ELE. SCH.2018,1001 CAT -B)
2
560
280
S/F of 6/10/16/20/25/32 Amp. SP MCB (10 KA ) C Curve of approved make and as per sample approved by E/I (PWD ELE. SCH.2018,1002 CAT-B)
2
412
206
Supply and fixing of 40 Amp. SP MCB (10 KA ) C Curve of approved make including making connections etc.complete all respect. (PWD ELE. SCH.2018,1003A CAT-B)
2
780
390
S/F surface/flush mounting 4 ways SPN distribution board without MCB with additional metal door complete in all respect as per direction of E/I. (PWD ELE. SCH.2018,1022 CAT-B)
2
1820
910
S/F surface/flush mounting 4 ways TPN distribution board with additional metal door without MCB complete in all respect as per direction of E/I. (PWD ELE. SCH.2018,1026 A CAT-B)
2
5780
2890
Supply and fixing of power plug with 20 amp/250 volt flush type modular switch and 5pin 20A/250V flush type universal modular socket switch on concealed M.S.Box including suplly of all materials ,labour T&P etc. required for proper completion of work (PWD Elec.Sch.2018 Item No.1139 A)
2
1250
625
S/F hexagonal/round G.P. fan box of approved make made up of 1.0 mm thick ISI marked G.P. sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box.Holes should be semi-shuttered type with 0.5 mm G.P. sheet made upper & lower cover duly screwed fitted with 300 mm round zink coated M.S. bar X 12 MM & brand name should be embossed. Fixing with wiring conduit laid in RCC roof before concreting alongwith supply of all materials labour and T&P etc. required for proper completion of work.(PWD ELE. SCH.2018,1149)
2
300
150
Supply and Fixing of G.P. Modular switch box for 1/2 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work. (PWD ELE. SCH.2018,1152A)
2
230
115
Supply and Fixing of G.P. Modular switch box for 3 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work. (PWD ELE. SCH.2018,1152B)
2
240
120
Supply and Fixing of G.P. Modular switch box for 4 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work. (PWD ELE. SCH.2018,1152C)
2
260
130
Supply and Fixing of G.P. Modular switch box for 6 Module of approved make made up of 1.0 mm thick ISI Marked G.P. sheet including adjustable Nakka and holes plugged with PVC nylon caps.Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box.Holes should be semi-shutterd type and fitted with heavy brass earth pillar duly srewed and brand name should be embossed.Box flushed in wall including cutting of brick work ,fixing it to the level with cement sand mortar including matching colour wash including supply of all materials, labour and T&P etc.required for proper completion of the work.(PWD ELE. SCH.2018,1152D)
2
290
145
Arranging JCV machine as per direction of Engineer - in - charge. Including all labour,fuel and T&P etc. required for proper completion of the work. (Material item no ch 2,21h+10%CP)
30
39600
1320
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements