Uttar Pradesh Jal Vidyut Nigam Limited Tender

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane (Rates as per analysis)

Providing and replacing damaged ventilation windows of Chittora Power House (Distt. Muzaffarnagar)

Attending minor type misc. works by engaging labor for full day. (UPPTCL SOR 2023, Item No.-1.07+ C.P. @ 10%)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropiate Z sections and other sections of approved make confirming to IS:733 and IS:1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e. top, bottom and sides with required EPDM /rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, C.P. brass /stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron) (CSI No. 28.24) (UPPTCL SOR 2023, Item No.-28.24)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gaskete etc. complete as per the architectural drawings and the direction of engineer in charge (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 4.0 mm thickness. (CSI 28.22) (UPPTCL SOR 2023, Item No.-28.22)